Here's my build OS: 10.13.6 CPU: i7-8700k MB: MSI Z370i Gaming Carbon AC RAM: 16 GB DDR4 Crucial Ballistix
My internet chipset is Intel I219-V Gigabit LAN controller and I am using version 2.4.0d0 of IntelMausiEthernet.kext.
I am paying for gigabit down speeds but I am not getting on my hackingtosh. My windows work CPU gets speeds up to 900mb/s but my hackintosh tops out at around 490-510mb/s. It's been like this on 10.13 and 10.13.6. Both machines are not using wi-fi when testing speed, they are both going straight into my router.
So. My laptop: Asus k55a I installed Mac OS X on the pendrive and now when I turn on the laptop and clicking esc bios it does not detect it. And now I have a question for you what settings I should set up to make everything good
Beginners Hackintosh tutorial how to create a macOS Mojave USB Installation Boot Flash Disk. Also works for High Sierra, Sierra and El Capitan. Make your own macOS Mojave boot disk. You can use it to install macOS Mojave, to repair your current installation or perform maintanace tasks.
macOS Mojave is available for download at this AppStore link: https://itunes.apple.com/gb/app/macos-mojave/id1398502828?mt=12
Apple Support's How to create a bootable installer for macOS: https://support.apple.com/en-us/HT201372
Clover Bootloader Download: https://sourceforge.net/projects/cloverefiboot/
Elan PS2 Track Pad - [ACPI\VEN_ETD&DEV_0675 - system device -PCI\VEN_8086&DEV_9D23&SUBSYS_383117AA&REV_21]
Realtek Network - [PCI\VEN_10EC&DEV_8136&SUBSYS_383317AA&REV_07]
SATA Controller - [PCI\VEN_8086&DEV_9D03&SUBSYS_382F17AA&REV_21]
USB 3.0 XHC - [PCI\VEN_808
--- Using Clover *
--- I'll attach it below.
I can't quite get it to install, and i've been going in circles for months now ...
I'll attach everything I have so far including, verbose pics, clover preboot, Clover folder, etc.
Here are some photos of the verbose text leading up to the installer, if maybe there is something useful in here?
And now photos of the installer
Above is an image of the Installer log, (the main pop up window loads from about 10 mins and stops arbitrarily at 2 minutes left, every time) of the nearly hundred attempts i have made, this is the final screen i get, pretty much no matter what i do.
Sometimes the the order of what it says is different , but the main things of interest are:
"Target is not convertible to APFS: This volume is not formatted as Mac OS Extended journaled."
"Warning: Couldn't find Board ID, Chip ID, & ECID in new namespace, falling back"
"Unable to get fs for null"
" NO native mechanism to verify Applediagnostics.chunklist"
" NO native mechanism to verify Installfa.plist"
" NO native mechanism to verify Basesystem.dmg"
" NO native mechanism to verify AppleDiagnostics.dmg"
" NO native mechanism to verify InstallESD.dmg"
" NO native mechanism to verify Basesystem.chumklist"
I have tried many many ... many .. different combinations of kexts, drivers, copies of clover, forks of clover - different copies of drivers and kexts from different sources.. including from all the official repositories.
* I am not trying to install with APFS - the drive i am using is a spinning HDD - so i don't understand the first line quote above.
* I am using a usb2 slot - there is only two on this machine - 1- usb2 and 1- usb3
* As you'll see in the Clover folder i'm using APFSdriverloader. - so the installer should detect the installer-APFS-thing - and see it should be HFS+ ?? no?
I'll detail the procedures:
I wiped the Target HDD drive with a live linux USB.
i prepair the USB with Createinstallmedia method, install clover to the EFI on usb, load kexts and drivers (I've been recently attempting with the Plist from a 'certain other site' Ton*****86) As it has the dvmt preallocation patch and other bits - i'm of course open to ANY other files/pLists .. this is just the one i've been experimenting with lately.)
Add ' -v ' in clover options to see the verbose output
in the installer (acts sketchy sorta, delayed and sluggish) i use DiskUtility to erase the drive 'Macos extended journaled'
Make initial selections, agree to license and begin install.
it proceeds to 2 minutes left every time, and hangs. many times i've left it for hours, and even overnight.
I'm honestly not kidding, it's nearly 100 times ive' tried this, i've downloaded high sierra from the app store 5 times to rule out that, i've used countless combinations of everything .. i'm almost completely burned out.
If anyone can shed some light i'll be VERY thankful!... I'm ready to go in a completely new direction...please please please help
I'll put the Clover in the next post because i ran out of space in this one......
Here is the latest clover i've been using, with the preboot, and DSDT/SSDT (F2 & F4) in it.