Jump to content
shinho73

How to install OS X on AMD C60 HD6290 netbook?

3 posts in this topic

Recommended Posts

I know that it is almost impossible to install any os x on AMD APU netbooks, but i am hoping that  someone could help me here. Any help would be greatly appreciated.

Thank you

Edited by shinho73

Share this post


Link to post
Share on other sites
Advertisement

It's not worth it on an AMD laptop I'm afraid. There's no support for the AMD iGPU which means you won't get any graphics acceleration and that's if you can get it to boot.

Share this post


Link to post
Share on other sites

I have a laptop with same processor, Acer AO722 with C-60 4gigs of RAM and HD6290 (pretty much identical except I'm installing to internal disk). It stopped where it says 1 minute remaining. Log says something with my install partition force-unmounted, I don't know why. Tried to install again but the previous partition is now formatted in case as RAW so I reformatted it to HFS+, then proceed to install. Before the log says something about force-unmount I clicked apple logo on the top left corner then restart. It booted to desktop but graphic card not detected (HD6290). Tried reinstall again without reformat, this time completed but still graphic card not detected, stuck with 1024x768.

Edited by Topaazy

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Fede1132
      Hi guys i have a problem install macOs Mojave on my PC, I have this configuration:

      CPU: Ryzen 7 2700X;
      GPU1: GTX 970 Strix(For game rendering and 144Hz Monitor);
      GPU2: GTX 750ti Strix(For 2nd monitor rendering to get 100% performances from 1st 144Hz Monitor);
      MotherBoard: MSI x470 GAMING PLUS
      Hard Disk 1 (Windows 10): Samsung EVO M.2;
      Hard Disk 2 (For Storage): RAID (1) between two hard disks;
      Hard Disk 3 (For Mojave): Kingston SSD 120GB;

      I have created my USB with this:
       
      Create Bootable USB Code: sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USB -- /Applications/Install\ macOS\ Mojave.app -- nointeract && say Done. Clover Settings: Boot: Verbose; dart=0; nv_disable=0; kext-dev-mode=1; GraphicsEnabler=No; XMPDetection = No. Cpu: C6. Devices: (Not Enabled = [ ] - Enabled = [-] - Full Enabled [✓]) Inject (Full Enabled); Add ClockID (Full Enabled); FixOwnership (Full Enabled); Gui: (Not Enabled = [ ] - Enabled = [-] - Full Enabled [✓]) Enabled (Full Enabled); Screen Resolution: 1920x1080; Kernel and Kext Patches: (Not Enabled = [ ] - Enabled = [-] - Full Enabled [✓]) Apple RTC (Full Enabled); KernelPm (Full Enabled); SMBIOS: iMac(18,3); System Parameters: Inject Kexts = Yes; Inject System ID; Used Kexts: FakeSMC FakePCIID NVIDIA WEB LILU BIOS: VT-d = Disabled; XHCI Hand-Off = Enabled; Legacy USB Support: Enabled; Hard Disk: AHCI Mode; Selection Mode: Legacy + EUFI; Clover Install Log:
      Full Error Log:
       
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
          First... If you need DSDT edits... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Run it, post files generated in your desktop RunMe.app  Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder  CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder CLOVER.zip   --Reboot and activate video!   -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   -DSDT My DSDT DSDT.GA H97M-DS3P MaLd0n.zip   -Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF -HDMI





      -FakeSMC
      https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek -Audio https://github.com/vit9696/AppleALC -LAN https://github.com/Mieze/IntelMausiEthernet   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By coreycusick
      I have an old P4 machine and I want to install OS X Tiger on it, is this possible in 2019, I can't find any torrents for jas 10.4.8
    • By tokia
      Hello,
       
      My desktop Hackintosh is running macOS Mojave 10.14.2 with two dedicated GPUs installed: NVIDIA GTX 1080 Ti, AMD Radeon HD 7970.
       
      The AMD GPU is used primarily under macOS and the NVIDIA one under Windows.
       
      macOS boots without issues as long as there are no displays connected to the NVIDIA GPU. If a display is connected then the display connected to the AMD GPU will become blank. The system can be accessed using Screen Sharing/VNC.
       
      There are no problems if I swap PCI-e slots for the GPUs so that the AMD GPU is in the first slot (primary GPU), but I prefer not to do this.
       
      I have tried to remove the whole PCI (bridge) device in the DSDT file and all the lines that refer to it. The PCI entries in ioreg and System Information are gone but System Information still shows an NVIDIA GPU under Graphics/Display.
       
      Many of the suggestions I have found in guides and forum posts do not seem to apply here. My problem with some of the guides and answers is that they give the solution without explaining how anything works, or they tell you what to do without explaining the reasons behind it.
       
      What else can I do? Thank you for any assistance you can provide!
       
      I have attached some files that may help you help me.
       
      DSDT_BIOS_3101.zip contains the original ACPI (*.aml) files without any patches.
      Send me Steffens-iMac.zip is a file produced by RunMe.app, and do contain simple patches to rename some devices.
      DSDT.dsl.patch is a diff of the original DSDT.dsl file and the one with the PCI devices removed (commented out).
       
      Motherboard: ASUS Rampage V Extreme (X99), BIOS version 3101 (macOS does not boot with anything newer).
      Clover version: 4813.
       
      DSDT.dsl.patch:
      --- /Users/sl/Desktop/DSDT_BIOS_3101/DSDT.dsl 2018-12-17 05:24:30.000000000 +0100 +++ /Volumes/EFI/EFI/CLOVER/ACPI/patched/DSDT.dsl 2018-12-17 16:52:08.000000000 +0100 @@ -5,7 +5,7 @@ * * Disassembling to symbolic ASL+ operators * - * Disassembly of DSDT.aml, Mon Dec 17 05:24:30 2018 + * Disassembly of DSDT.aml, Mon Dec 17 04:01:52 2018 * * Original Table Header: * Signature "DSDT" @@ -2128,7 +2128,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -2274,7 +2274,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -2420,7 +2420,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -2570,7 +2570,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -2803,12 +2803,14 @@ If ((CSTA (Arg0, Arg1) == 0x00)) { FLAG = 0x00 - PRID (APID = 0xFF) = 0xFF + APID = 0xFF + PRID = 0xFF } Else { Local0 = APID - PRID (FLAG = 0x01) = Local0 + FLAG = 0x01 + PRID = Local0 } Return (APIC) @@ -15259,7 +15261,7 @@ ^BR2B.OSHP () ^BR2C.OSHP () ^BR2D.OSHP () - ^BR3A.OSHP () + //^BR3A.OSHP () ^BR3B.OSHP () ^BR3C.OSHP () ^BR3D.OSHP () @@ -26861,7 +26863,7 @@ } } - Device (BR3A) + /*Device (BR3A) { Name (_ADR, 0x00030000) // _ADR: Address OperationRegion (MCTL, SystemMemory, 0xE0013188, 0x04) @@ -27496,7 +27498,7 @@ { Name (_ADR, 0xFFFF) // _ADR: Address } - } + }*/ Device (BR3B) { @@ -30267,7 +30269,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -30567,21 +30569,21 @@ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4158, // Range Minimum - 0x0000, // Range Maximum + 0x4158, // Range Maximum 0x0000, // Translation Offset 0x0001, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x5758, // Range Minimum - 0x0000, // Range Maximum + 0x5758, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x5858, // Range Minimum - 0x0000, // Range Maximum + 0x5858, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) @@ -37604,7 +37606,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -37904,21 +37906,21 @@ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4558, // Range Minimum - 0x0000, // Range Maximum + 0x4558, // Range Maximum 0x0000, // Translation Offset 0x0001, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4259, // Range Minimum - 0x0000, // Range Maximum + 0x4259, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4359, // Range Minimum - 0x0000, // Range Maximum + 0x4359, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) @@ -44941,7 +44943,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -45241,21 +45243,21 @@ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4958, // Range Minimum - 0x0000, // Range Maximum + 0x4958, // Range Maximum 0x0000, // Translation Offset 0x0001, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4559, // Range Minimum - 0x0000, // Range Maximum + 0x4559, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4659, // Range Minimum - 0x0000, // Range Maximum + 0x4659, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) @@ -53823,7 +53825,7 @@ Notify (\_SB.PCI0.BR2D.H007, Local0) } - If ((\_SB.PCI0.BR3A.PMEP == 0x01)) + /*If ((\_SB.PCI0.BR3A.PMEP == 0x01)) { Local0 = \_SB.PCI0.BR3A.PMEH (0x05) } @@ -53848,7 +53850,7 @@ Notify (\_SB.PCI0.BR3A.H005, Local0) Notify (\_SB.PCI0.BR3A.H006, Local0) Notify (\_SB.PCI0.BR3A.H007, Local0) - } + }*/ If ((\_SB.PCI0.BR3B.PMEP == 0x01)) { @@ -54608,11 +54610,11 @@ \_SB.PCI0.BR2D.PMEP = 0x01 } - If ((Local1 == 0x07)) + /*If ((Local1 == 0x07)) { \_SB.PCI0.BR3A.PMES = 0x01 \_SB.PCI0.BR3A.PMEP = 0x01 - } + }*/ If ((Local1 == 0x08)) { @@ -54879,10 +54881,10 @@ Notify (\_SB.PCI0.BR2D, 0x02) } - If ((\_SB.PCI0.BR3A.DEVS () != 0x00)) + /*If ((\_SB.PCI0.BR3A.DEVS () != 0x00)) { Notify (\_SB.PCI0.BR3A, 0x02) - } + }*/ If ((\_SB.PCI0.BR3B.DEVS () != 0x00)) { @@ -55927,10 +55929,10 @@ { Notify (\_SB.PCI0.BR2D, 0x00) } - Case (0x28) + /*Case (0x28) { Notify (\_SB.PCI0.BR3A, 0x00) - } + }*/ Case (0x29) { Notify (\_SB.PCI0.BR3B, 0x00) @@ -56736,11 +56738,11 @@ } } - Scope (_SB.PCI0.BR3A) + /*Scope (_SB.PCI0.BR3A) { Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { - If ((Arg0 == ToUUID ("e5c937d0-3553-4d7a-9117-ea4d19c3434d") /* Device Labeling Interface */)) + If ((Arg0 == ToUUID ("e5c937d0-3553-4d7a-9117-ea4d19c3434d") / * Device Labeling Interface * /)) { If (((Arg1 == 0x02) && (Arg2 == 0x00))) { @@ -56765,7 +56767,7 @@ 0x00 }) } - } + }*/ Scope (_SB.PCI1.QR1A) {  
      DSDT_BIOS_3101.zip
      Send me Steffens-iMac.zip
      DSDT.dsl.patch
    • By Jordan Davis
      I'm a software developer, and have been getting into a lot of photo/video-ography. So I'm looking for advice from the community to help me build bad ass video editing comp so I don't waste my life in front of the screen waiting on rendering times.
       
      So I've watched this video --  https://www.youtube.com/watch?v=SY_h_W5I0Jo&t=497s
      Looks like in terms of video editing using software like PR and AE, the amount of CPU cores seems to be the greatest factor and the amount of GPU cores coming in 2nd?  
      Build: (keep in mind I want to run OSX)
      CPU - So I'm looking at getting the new Intel i9? (because the amount of cores) GPU - some high core Radeon GPU? (because I think all apple stuff works with Radeon) FAN - cooler master, idk is this a reliable brand?  idk what  else open for suggestions  
       
×