Jump to content
headkaze

Intel Framebuffer patching using WhateverGreen

291 posts in this topic

Recommended Posts

Thank you for the answer, but I need your patient a little bit more because I never used Xcode in my 3 years of Hacknitoshing.
So, I found WhateverGreen.xcodeproj in the Source code (ZIP) of WhateverGreen which is a folder after I downloaded it.
Then I downloaded the debug of Lilu.kext and placed it in the same folder Source code of WhateverGreen
I ran WhateverGreen.xcodeproj then Xcode opened in a window, now how to compile and export to kext/s ?

At the top left will be a folder icon click that. Then in the left pane scroll down to the bottom where it says products or something and highlight Whatevergreen.kext then right click and open with finder.


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
Advertisement
14 minutes ago, STLVNUB said:

Use this

A lot easier

Looks easy but the App created Lilu_Suite folder in the desktop with tow empty folders inside, Release and Debug.

Im lost again :blush: 

Share this post


Link to post
Share on other sites
Looks easy but the App created Lilu_Suite folder in the desktop with tow empty folders inside, Release and Debug.
Im lost again :blush: 

On the Lilu suite builder thread the first post has a fix for that. Near the bottom.


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

desktop hd4600, smbios 14,2. 

The external display shown as built-in,how to correct it?

 

Edited by bluemaP1E

Share this post


Link to post
Share on other sites
8 hours ago, bronxteck said:

try removing PNLF patch if you have it in config or DSDT/SSDT

I only put lilu whatevergreen to the kext folder and add "AAPL,ig-platform-id=0300220D disable-external-gpu=01000000 ".
no dsdt ssdt,no other graphics fixes.

Share this post


Link to post
Share on other sites

I'm trying to run my internal Intel HD4600 and I only get 2560 x 1440, never get 4k, I'm try with HDMI and DP wire, when I try with whatever frame frame I get reboots or black screen before login.

What may be happening?

I have copied their options on devices, without any results.

with "injectIntel" and ig-platform-id I get it to work in 2560x1440, but nothing more than resolution.

Thanks for your time.

 

upload my config.plist

 

 

UPDATED.....ç

 

After many attempts, I have framebuffer Intel HD4600 running with 2048mb.

but I have no higher resolution than 2560 x 1440, which is missing to obtain said resolution.

Connected by HDMI or DisplayPort I do not get more resolution

 

 

Edited by Macbellota

Share this post


Link to post
Share on other sites

Can somebody please tell me what values should I use for i9-9900k? I can't get them right, either acceleration is not working, or there is no HDMI output.

Share this post


Link to post
Share on other sites
Can somebody please tell me what values should I use for i9-9900k? I can't get them right, either acceleration is not working, or there is no HDMI output.

You mean intel UHD Graphics 630?

The recommended ig-platform-Id is 0x3E9B0007 so you would enter 07009B3E in your AAPL,ig-platform-id field.

What is the output of

./gfxutil -f IGPU

Are you using latest Whatevergreen and Lilu?

 

 

Sent from my iPhone using Tapatalk

 

Share this post


Link to post
Share on other sites
16 minutes ago, SavageAUS said:

You mean intel UHD Graphics 630?

The recommended ig-platform-Id is 0x3E9B0007 so you would enter 07009B3E in your AAPL,ig-platform-id field.

What is the output of

 


./gfxutil -f IGPU
 

 

Are you using latest Whatevergreen and Lilu?

 

 

Sent from my iPhone using Tapatalk

 

Yes, this is UHD 630.
I have latest Lilu and Whatevergreen, just downloaded them today.

gfxutil gives:

DevicePath = PciRoot(0x0)/Pci(0x2,0x0)
I did use this in clover already.

With various values I tested for ig-platform-Id and device-id I usually can get acceleration, but HDMI output is turning the screen off. Although system recognizes monitor name in settings.

platform-id itself doesn't change anything, only when I add device ID (for example 913e0300) I get acceleration, and screen is off. What value should I use for device id?

Edited by oneghost

Share this post


Link to post
Share on other sites
Yes, this is UHD 630.
I have latest Lilu and Whatevergreen, just downloaded them today.
gfxutil gives:
DevicePath = PciRoot(0x0)/Pci(0x2,0x0)
I did use this in clover already.

With various values I tested for ig-platform-Id and device-id I usually can get acceleration, but HDMI output is turning the screen off. Although system recognizes monitor name in settings.

platform-id itself doesn't change anything, only when I add device ID (for example 913e0300) I get acceleration, and screen is off. What value should I use for device id?

Have you tried using the intel fbpatcher app? You may need more that just the ig-platform-id and other patches for hdmi.
Also make sure you have read the first post properly.


Preliminary
1. Remove:
- FakePCIID_Intel_HD_Graphics
- IntelGraphicsFixup
- NvidiaGraphicsFixup
- CoreDisplayFixup
- Shiki
2. Turn off all graphics injections in Clover:
- config.plist/Graphics/Inject/ATI=NO
- config.plist/Graphics/Inject/Intel=NO
- config.plist/Graphics/Inject/NVidia=NO
- config.plist/Graphics/ig-platform-id=
- config.plist/Devices/FakeID/IntelGFX=
Hj02qx9.png
3. Disable DSDT Clover fixes:
- AddHDMI
- FixDisplay
- FixIntelGfx
- AddIMEI
4. Disable UseIntelHDMI
5. Remove boot argument: -disablegfxfirmware
6. Remove any IGPU and HDMI entries from:
- config.plist/Devices/Arbitrary
- config.plist/Devices/Properties
- config.plist/Devices/AddProperties
7. Remove any IGPU and HDMI related SSDT and DSDT from:
- CLOVER/ACPI/patched
8. Renaming GFX0 -> IGPU
- WhateverGreen will do this automatically (see caveat below)
- Be aware that WhateverGreen does not rename all instances of GFX0 -> IGPU but should be okay in most cases
- You may need to include Clover GFX0 -> IGPU rename for other kexts or ACPI patching that require it




Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
I have read and tried all from this post, but nothing helped with HDMI.

So your monitor is connected via hdmi? I can’t see signatures on Tapatalk so I don’t know your specs. Laptop or desktop? Can you upload your clover folder minus serials and themes. Do you have any kexts installed to L/E or S/L/E?


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
36 minutes ago, SavageAUS said:


So your monitor is connected via hdmi? I can’t see signatures on Tapatalk so I don’t know your specs. Laptop or desktop? Can you upload your clover folder minus serials and themes. Do you have any kexts installed to L/E or S/L/E?


Sent from my iPhone using Tapatalk

It's Gigabyte z390 Aorus Master with i9-9900K - Desktop. No eGPU. Im connected over HDMI to 1080p monitor. I don't have DP on this board.

CloverContent.zip

Edited by oneghost

Share this post


Link to post
Share on other sites
10 hours ago, oneghost said:

It's Gigabyte z390 Aorus Master with i9-9900K - Desktop. No eGPU. Im connected over HDMI to 1080p monitor. I don't have DP on this board.

CloverContent.zip

Have you tried changing your smbios? To iMac18,3 or iMacPro1,1 <--- unsure about that one.

Share this post


Link to post
Share on other sites
8 hours ago, SavageAUS said:

Have you tried changing your smbios? To iMac18,3 or iMacPro1,1 <--- unsure about that one.

I tried both, and some other too.

Share this post


Link to post
Share on other sites

Anyone know if there is any way to get i9-9900K (UHD630) acceleration with HDMI? Every time I am able to get acceleration, there is no output over HDMI, screen just goes off. MOBO: Gigabyte z390 Aorus Master

Edited by oneghost

Share this post


Link to post
Share on other sites
On 12/10/2018 at 10:31 PM, oneghost said:

Anyone know if there is any way to get i9-9900K (UHD630) acceleration with HDMI? Every time I am able to get acceleration, there is no output over HDMI, screen just goes off. MOBO: Gigabyte z390 Aorus Master

Hmm, for me, i7-9700k (ok, no HT as 9900k) with UHD630 is working with acceleration with HDMI (and also with DP) [output from VDADecoderChecker].

Board: Asus Prime Z370-A.

 

From your EFI, try to disable some more DSDT-Patches (HECI to IMEI and GFX0 to IGPU).

I'm using same device-id / platform-id as you mentioned.

 

Cheers

Edited by skinmunster

Share this post


Link to post
Share on other sites
On 12/16/2018 at 11:13 PM, skinmunster said:

Hmm, for me, i7-9700k (ok, no HT as 9900k) with UHD630 is working with acceleration with HDMI (and also with DP) [output from VDADecoderChecker].

Board: Asus Prime Z370-A.

 

From your EFI, try to disable some more DSDT-Patches (HECI to IMEI and GFX0 to IGPU).

I'm using same device-id / platform-id as you mentioned.

 

Cheers

 

Can you share your config and what Kexts u used to get signal thru hdmi ?

Share this post


Link to post
Share on other sites

i have a Dell M4800 with "switchable" graphics - HD 4600 + AMD 5100.

with the IGPU HD 4600, the laptop works great but i cant use the HDMI (only LCD)

and with AMD - the reverse is true. 

 

i was wondering if anyone has figured out a way to use both. say use IGPU - single buffer to power LCD and then have AMD power the external ports?

 

anyway just looking for ideas. thanks.

Share this post


Link to post
Share on other sites
It's Gigabyte z390 Aorus Master with i9-9900K - Desktop. No eGPU. Im connected over HDMI to 1080p monitor. I don't have DP on this board.
CloverContent.zip
You better ask to DSDT patch

https://r.tapatalk.com/shareLink?url=https://www.insanelymac.com/forum/topic/321872-guide-sierra-high-sierra-mojave-on-mobos-serie-100-200-300-skylake-kabylake-coffeelake-dsdt/&share_tid=321872&share_fid=30100&share_type=t

Sented by Tapatalk in my Android SM-G930S

Share this post


Link to post
Share on other sites
Posted (edited)

My laptop sometimes can’t boot and shows this occasionally.

I use hdmi20 to patch 4K pixel lock but it have no problem past.
IMG_6493.thumb.jpg.34f1865e771539d5ad331fc4c93524fb.jpg

Edited by gujiangjiang

Share this post


Link to post
Share on other sites

Guys I am also struggling to make UHD 620 work on my machine. The Graphics drivers load correctly and System Info also shows graphics as: UHD 620 1536 MB

 

But I am facing too much glitches. I will try to describe it in the best way possible.

 

So the system boots up pretty fast till first stage Apple Logo, At the second stage, when the screen flickers for a tiny bit of second, progress bar always seems to get stuck. After waiting for a couple of seconds, the mouse pointer comes, stating the login screen has loaded.

Then I can type in the password and hit enter to login, I'll just see a spinning bar overlapping the Apple Logo and then, we can see a very faded out desktop.

As the desktop fades in to screen normally, in my case, it get's stuck at the initial fade state. At this point if I plugin in HDMI cable, the screen becomes normal and I get display both on HDMI and internal display.

Then, I get stutters and lags like, If I delete a file from desktop, it would be deleted but the icon still stays there until I relaunch Finder or Navigate the same location from the Finder window.

The launchpad opening and closing is very smooth, like it is when the graphics is working normally. The lags can be more specifically said to be rendering delays. As in, the actual stuff is happening only it is not being visually updated.

When we open System Prefs any of the sub prefs will not load or it will load and the title would say "Loading General, Loading Displays or Loading XYZ"

But we can access the prefpane if we open it directly by right clicking on System Pref icon and choosing the appropriate option.

If I type something in 'Terminal' a few letters will be (visually) shown while in the background, everything is working, If I minimize terminal or resize it's window, the text get's rendered/updated.

I have also tried with Skylake spoofing with both on HS and Mojave, The issue is the same.

Also, If I adjust the graphics brightness from the prefpane, If I directly click at the point that I want, the display behaves normally whereas if I slide gradually, entire window crashes and I am sent back to the login screen.

Same crash happens when I use the brightness keys to adjust the brightness.

One thing to note: In any case, when some freeze happens, I can connect or disconnect HDMI to get the screen back to normal.

I am being this vague as I seriously can't understand what is happening in this case.

Tried with fixing EDID, changing color depth, and what not. The issue prevails. Please have a look and guide me on what to do next.

I am attaching the full PR files for the review along with a AGDCDiagnose report.

 

NOTE: I have also tried with the HDMI after disconnecting the internal display (clamshell mode) and the similar lags happen and hence I am sure that it is not related to connector type being eDP. Also, removing AlwaysConnected flag leads to a black screen but the similar lags happen (tested via screen sharing)

 

Hope someone can help fix my what-can-be-termed-as rendering lags on this machine.

Also, here is a video in case my explanation was not quite clear: (Please watch the video till the end as lags are sadly mostly visible towards the end, 1080p resolution is recommended)
https://www.youtube.com/watch?v=UYaJbJhl8kU

debug_12516.zip

diag.txt

Edited by black.dragon74

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By karthiksh1989
      can somebody walkthrough with the mojave installation guide?
      i have a mac high sierra 13.6 version on my macbook pro and want to install mojave on my desktop
      Exact config is Gigabyte gaming wifi 7 motherboard amy ryzen 7 2nd gen 2700X processor Gigabyte G1 8GB grapgic card VEGA 64
      running 2 nvme Samsung 256gb cards and 1 intel 180gb ssd internal and 1tb WD HDD, with 64 GB 3200Mhz Ram
       
      https://wa.me/919611736534 (whatsapp)
    • By ltooz_audis
      I always want to have a long lasting battery ultrabook to install Mojave on. I was looking at Dell XPS 13 but its design is not very good with the camera and other problems. HP Spectre x360 is a nice design but the wifi module is soldered on board. The Envy 13" is the best one in the bunch for MacOS Mojave. I would not use any other macOS besides Mojave, it's the best one so far. If you can't get it done with macOS Mojave, you don't do it correctly, it's much more refined and given than older macOS's.
      I wanted the 8th generation because of the 4 cores which is almost 1.5 times faster than this 7th generation i7-7500u, but the price is too high. I picked up this one on Craigslist for $400. I've just ordered the 500GB NVME WD Black for $104 and DW1560 for $29. So, the perfect MacBook Pro 14,2 is less than $600 that last 5-6 hours with Mojave and 8-9 hours on Windows 10. The bench mark is the same as the real MacBookPro 14,2. BTW, this is the first try, there will be on going testing and confirming. 250GB hard drive is hardly enough for dual boot Windows and Mac. You need at least 500GB, I don't use Windows at all, so I'll partition 200GB for Windows and 300GB for Mojave.
      All new HP laptops will have kernel panic if using Clover to boot UEFI, at least a fix was found. I'll have more videos and info when I have time to write them. Watch the videos and ask questions if you have any problems.
      1. Clover 4558 - Lilu.kext (1.3.3) - AppleALC.kext (1.3.1) - Whatevergreen.kext (1.2.3) - USBInjectAll.kext (0.6.5) - Fakesmc.kext (6.25-332-gf3a8525c.1758) - ACPIBatteryManager.kext (1.81.4) - AHCIPortInjector.kext - BrcmFirmwareRepo.kext (2.2.7) - BrcmPatchRAM2.kext (2.2.7) - CodecCommander.kext (2.6.2) - FakePCIID_Broadcom_WiFi.kext (1.3.9) - FakePCIID_Intel_HD_Graphics.kext (1.3.9) - FakePCIID.kext (1.3.9) - SSDT-AUIC-ALL.aml - SSDT-USBX.aml - SSDT-PNLF.aml - SSDT-PluginType1.aml - PreLoader.efi.
      2. For the keys F2 & F3 to work with backlight slider - the Fakesmc.kext version is important for some reasons, I'm still trying to find out why.
      The touchscreen actually works without the voodooI2C kexts, just need to patch the clover.
       
      I've been playing with the laptop for over a week now. Ordered the WD 500GB WDS500G2X0C from Amazon for $104, the 256GB is too small for dual booting Windows 10 & Mojave. It's really plug and play.
       
      Hardware - needed to make this a perfect macbook Pro14,2.
      1. DW1560 BCM94352Z - make sure it has 2 notches - Tape the 2 right pins on the 4 pins tab for it to work without a hitch on both Windows 10 and Mojave. You can buy from Ebay cheaper but you have to wait for months.
      2. 500GB NVMe SSD m.2 connector M is a must for dual boot - the cheaper one will be slower - Crucial NVMe 500GB is $25 less than WD.
      3. NOVOO USB-C to HDMI hub that works and inexpensive.
       
      Let's start to get this Kaby Lake working on the HP - I believe HP has the same components for similar configuration on different models. In order to get Mojave to work on Intel Laptop, we need a few important components - Sound is important (look for Realtek - ALC295) - Ethernet if any -Realtek - Trackpad  and TouchScreen (Synaptics or Elan).
       
      REPLACE VNMe SSD HARD DRIVE and DW1560 BCM94352Z
       
      The current BIOS is F22, the newest one is F27 but I don't want to update since it's working well. Since I don't really need the original Windows 10 with Junk software in it, I install the latest Windows 10 using Media Creation USB Boot Drive. The important thing is we have to prepare the SSD correctly or our EFI folder will only be set at 100MB which is not enough to install Clover or any other boot loaders. So instead of letting the Windows installer to create the EFI folder automatically, we can set the size ourselves using "diskpart" command. In order to use diskpart, we need to boot with Windows 10 USB installer (hit F9 then select UEFI USB installer) - select system repair and not installation - then select command prompt, from here we can create EFI folder and MSR for Windows installer to install. The product ID is already in the UEFI bios, so we don't really have to manually activate the Windows 10.

       
       
      diskpart
      select disk 0
      clean
      convert gpt
      create partition efi=300 !!! you can change it from 300MB to any size.
      format quick fs=fat32 label="EFI"
      create partition msr size=16
      exit

      After exit, reboot with the USB installer again in UEFI mode, select the custom. The Windows installer will select the 300MB EFI folder we've just created.
       
       
      How to fix KP on Clover UEFI Boot.
       
       
      This is the macBook Pro 14,2 from HP 13-ad010nr
       
       
       
      Louis
       
    • By yehia2amer
      Problem:
      When I Attempt to wake my Machine from sleep, the screen stays black, although the computer is obviously awake !
      This Machine has a 1300W Power Supply So Sleep is Very Useful.
       
      I Tried:
      1) FIX_WAK and FixShutdown as per Clover Wiki.
      2) Although I am using "SAPPHIRE Radeon PULSE RX 580 8GB GDDR5", which Should be completely Supported by Mojave, I Also changed the Part Number to "113-4E353BU-O4E" as per this Guide: http://www.xlr8yourmac.com/archives/feb18/RadeonRX-580_MacPro.html. The GPU is working GREAT without even Clover Inject
      3) Tried to Run this command: disablehibernate.command.zip
      4) Tried darkwake=0 to 10
      5) Disabled wake on USB & Wake on LAN (BIOS)
       
      Logs:
      sudo pmset -g
      System-wide power settings: Currently in use: hibernatemode 0 disksleep 10 womp 0 networkoversleep 0 sleep 0 Sleep On Power Button 1 ttyskeepawake 1 hibernatefile /var/vm/sleepimage autorestart 0 gpuswitch 2 displaysleep 10 pmset -g assertions
      2019-02-19 18:51:04 +0200 Assertion status system-wide: BackgroundTask 1 ApplePushServiceTask 0 UserIsActive 1 PreventUserIdleDisplaySleep 0 PreventSystemSleep 0 ExternalMedia 1 PreventUserIdleSystemSleep 0 NetworkClientActive 0 Listed by owning process: pid 56(powerd): [0x0000001700088000] 00:13:44 ExternalMedia named: "com.apple.powermanagement.externalmediamounted" pid 100(hidd): [0x00000025000980a7] 00:00:00 UserIsActive named: "com.apple.iohideventsystem.queue.tickle.4294968578.17" Timeout will fire in 600 secs Action=TimeoutActionRelease pid 200(mds_stores): [0x0000034e000b8279] 00:00:00 BackgroundTask named: "com.apple.metadata.mds_stores.power" Kernel Assertions: 0x4=USB id=502 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d130000 owner=USB Keyboard id=503 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d120000 owner=Lenovo Optical Mouse Idle sleep preventers: IODisplayWrangler  
      Specs:
      CPU: 2x Xeon E5-2680 v2 2.8GHz Ten Core Processors
      RAM: 128 GB 1333 MHz DDR3 ECC Memory
      GPU: SAPPHIRE Radeon PULSE RX 580 8GB GDDR5
      Chipset: Intel C602
      Audio: Realtek ALC3220 (ALC280) High Definition Audio
      SAS Drive Controllers (RAID): LSI 2308 SATA/SAS 6Gb/s controller with host based RAID 0, 1, 10 (4  
      Network Controller 1: Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support
      Network Controller 2: Intel Ethernet Controller I210 
      NEC USB3.0 xHCI Controller: Renesas Electronics uPD720201 & uPD720202
       
      for more info:
       
      Any Help will be appreciated, Thanks !
       
      Send me Yehias-Mac-Pro.zip
    • By yehia2amer
      Dell Precision T7610 Workstation
      Hackintosh GUIDE (Work in Progress)
       
                        
      Introduction: 
      Hi Everyone,
      This Workstation used to be a Beast with Dual CPUs and tons of RAM, I Know it is now normal to get that much cores in a Desktop but it is still a very decent machine for me (As a Programmer), and I thought it would be a good idea to Install MacOS as the Daily Driver Rather than Linux and It turns out to be a very Great Experience (with Some Challenges ).
       
      Specs:
      CPU: 2x Xeon E5-2680 v2 2.8GHz Ten Core Processors RAM: 128 GB 1333 MHz DDR3 ECC Memory GPU: SAPPHIRE PULSE Radeon RX 580 8GD5 Chipset: Intel C602 Audio: Realtek ALC3220 (ALC280) High Definition Audio SAS Drive Controllers (RAID): LSI 2308 SATA/SAS 6Gb/s controller with host based RAID 0, 1, 10 (4  Network Controller 1: Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support
      Network Controller 2: Intel Ethernet Controller I210
      NEC USB3.0 xHCI Controller: Renesas Electronics uPD720201 & uPD720202
       
      Working:
      Both "Xeon E5-2680 v2" and all cores with Power Management and P-States (using VoodooTSCSync & ssdtPRGen.sh) ATI Radeon HD 4870 (Vanilla) Realtek ALC3220 (ALC280)  (using VoodooHDA till Now - it is partially working with AppleALC using layout-id 13) LSI 2308 SAS (using AstekFusion2) Intel 82579 Network Controller (Vanilla) Intel I210 Network Controller (IntelMausiEthernet) USB 2.0  
      Not Working:
      NEC USB3.0 xHCI Controller (Renesas Electronics uPD720201 & uPD720202) Sleep  
      https://github.com/yehia2amer/Dell-Precision-T7610-Workstation-Hackintosh-Guide
    • By wen1
      Work in progress
       
      This is mini guide and config files for installing Mojave on a Dell XPS 13 9370.
       
      I took inspiration from sensibleJoe at on reddit
       
      My laptop's specs
       
      i7-8550U Intel HD 620 Graphics UHD Display 256GB Samsung NVMe SSD PM961 Killer 1435 Wifi  
      Here is what works
       
      Intel HD Graphics  Sleep Sound & Mic USB Wifi (Internal Killer Wifi will not work) Bluetooth Power Management Battery Management Screen Brightness Control  
      What does not work
       
      Internal Wifi Camera SD Card reader  
       
       
      I followed the vanilla guide here to create the Mac OS Mojave install USB. I used Mac OS 10.14.3.
       
      Here are some rough steps
       
      1. Create the USB installer for Mojave. You can use apple's own instructions
      2. Once the installer USB creation is complete, Install the latest version of clover to the USB disk with the following options 
      Install Clover for UEFI booting only
      Install Clover to the ESP
       
      Leave everything else as default (minimal install without a bunch of drivers)
       
      3. Then mount the EFI folder on the USB drive and replace the files in the config folder with the ones from the attached zip file over writing the files already there. This config is specifically for Dell XPS 13 9370.
      4. Go into the UEFI/BIOS on the laptop, Make sure your SATA mode is set to AHCI (And not Raid). Save and Exit
      5. Boot with the USB disk and install Mojave
      6. After the install is complete, Use the USB to boot again but this time boot into the newly installed Mojave partition.
      7. Install Clover on to the SSD with the same options as before.
      8. Then copy the config files to the EFI folder on the SSD overwriting the config folder there.
      9. Acquire the backlight AppleBacklightFixup.kext from here and install to /Library/Extensions (Thanks to Rehabman for the kext)
      10. Reboot.
       
      EDIT: V4 fixes many things, like powermanagement, backlight control etc. you also need to install AppleBacklightFixup.kext to /Library/Extensions
       
       
      CLOVER-v4.zip
×