Jump to content
fantomas1

[pre-release] macOS Mojave

2,463 posts in this topic

Recommended Posts

1 minute ago, MorenoAv said:

at the moment I only boot with usb, and now with the KP's and booting in safe mode I can't mount the EFI with clover configurator... 

 

Try booting from USB without -x, and once at desktop remove that usb, try mounting efi with: EFI Mounter.app.zip

1 minute ago, HBP said:

Not since I got it running, the 750TI is using a GM107 vs the 660 using a GK106. and I didn't find a GM100 kext native, though they have a GK100 kext.

Have you tried DisableNvidiaInjection=No from OzmosisDefaults?

Share this post


Link to post
Share on other sites
Advertisement
5 hours ago, jlcdgd said:

I was able to make 10.14 works in my Asus X99 deluxe with 5960X.

 

Please find enclosed the most important clover files of my EFI folder.

 

No USB kext and all ports working perfect at right speeds.

 

Both ethernet ports also working.

 

Bluetooth and wifi working too.

 

Audio working via Voodoo HDA, Radeon Graphics

 

Some kext patches, no kernel patches.

 

I hope it can help someone.

 

Best

 

JLC

 

 

Archive.zip

Hi jlcdgd, 

 

Thanks so much - you're godsend!

 

Did my first attempt towards 10.14 which failed miserably...

 

I'll analyse your files and then come back to you!

 

Boa sorte,

Paulo

Share this post


Link to post
Share on other sites

Hello everyone! Please excuse me, but I need someone's wisdom! I have everything working on X-99 with Mojave, with last Clover, the latest kernel patches available... etc. But I can´t get speedsteps! XCPM=0 with IPG constantly at maximum frequency. If someone, with similar hardware, has a little time available, please look at my attached EFI and fix something that might be wrong! All the hardware is in my signature and it always worked fine with all previous macOS, including 13.6 beta 2.

Thanks!

EFI.zip

Share this post


Link to post
Share on other sites
13 minutes ago, Fergarth said:

Hello everyone! Please excuse me, but I need someone's wisdom! I have everything working on X-99 with Mojave, with last Clover, the latest kernel patches available... etc. But I can´t get speedsteps! XCPM=0 with IPG constantly at maximum frequency. If someone, with similar hardware, has a little time available, please look at my attached EFI and fix something that might be wrong! All the hardware is in my signature and it always worked fine with all previous macOS, including 13.6 beta 2.

 Thanks!

EFI.zip

Hi,

 

Looks like the patch applied to _xcpm_bootstrap is missing from your config. That might be why you are lacking of XCPM at all. By the way, do you need to disable that many registers? I guess you may only need to disable xcpm_pkg_scope_msrs. Oh, if you have locked 0xE2, then xcpm _idle_wrmsr patch should also be reserved. (Disable it if you do not)

Attached my modified config, FYI.

 

config.plist.zip

Share this post


Link to post
Share on other sites

After one more re installation and change devices 1 to 7 after substitute all 1.2.8 v2 and lily I have no Audio devices and no sound... yet

Now what?

Edited by MorenoAv

Share this post


Link to post
Share on other sites
1 hour ago, crazybirdy said:

 

Not the same, that's why I ask?

it is now apart of the Assets.car file within that same directory. You will need to find a way to extract the archived file and modify it then re archive it with a .car extension. I tried a few tools like cartoon and Asset Catalog Tinkerer with no success seems they haven't been updated to Mojave yet. You may have better luck in High Sierra with those apps. I didn't have time to try. You can see it here.

Screen Shot 2018-06-13 at 6.32.20 PM.png

Share this post


Link to post
Share on other sites
10 hours ago, crazybirdy said:

 

Where to change the SystemLogo?

 

01.gif.d557a1d2e18b65abad856a16829d1a47.gif

utilities/systeminformation/show package contents/resources assets.car

 

Edited by Mc Jacej

Share this post


Link to post
Share on other sites
18 minutes ago, MorenoAv said:

After one more re installation and change devices 1 to 7 after substitute all 1.2.8 v2 and lily I have no Audio devices and no sound... yet

Now what?

 

Ok, make a backup of your entire actual EFI folder, and replace config with the one attached, also place the unzipped SSDTs in the patched folder and reboot! Hope this will fix sound, and let us continue, this is only for test purpose, gonna see the result

config.plist

SSDTs.zip

Share this post


Link to post
Share on other sites

Nope no sound... replaced config.plist and put ssd's in acpi patched, and rebooted...

Edited by MorenoAv

Share this post


Link to post
Share on other sites
1 hour ago, PMheart said:

Hi,

 

Looks like the patch applied to _xcpm_bootstrap is missing from your config. That might be why you are lacking of XCPM at all. By the way, do you need to disable that many registers? I guess you may only need to disable xcpm_pkg_scope_msrs. Oh, if you have locked 0xE2, then xcpm _idle_wrmsr patch should also be reserved. (Disable it if you do not)

Attached my modified config, FYI.

 

config.plist.zip

Thank you dear PMheart! I will test and I already report! And yes I have the Bios unlocked!

Share this post


Link to post
Share on other sites

Try this fresh compiled version of AppleALC, but IMHO, as someone said maybe Apple dropped ALC887/892, and maybe I'll have this problem to when I'll flash my MOBO with the last boded bios for Ozmosis. Hope if not, can you post the current IOREG to see that damn HDEF device on it?

AppleALC.kext.zip

Share this post


Link to post
Share on other sites
12 minutes ago, MorenoAv said:

ok replaced alc kext and nothing yet.. and here it goes my ioreg...

iMac de AC.zip

 

You're doing something wrong with that drives, the device rename patches that I gives to you aren't loaded to rename them. This proof that the EFI partition that you should boot from aren't loaded. Remove all the hard drives, i mean all, keep only the one that we're working on, and boot, make sure the efi have the files given in previous post, reboot again, and post IOREG if no sound.

But please do not touch something in that config.plist I give, so I'll know if the things are properly loaded.

Edited by ammoune78

Share this post


Link to post
Share on other sites

ok man, I'll do it now and I want you to know that did replace the kexts and put the dsdt's in place correctly, but one more time the things don't load... I don't touch the config.plist that you gave me...

Share this post


Link to post
Share on other sites
Just now, MorenoAv said:

ok man, I'll do it now and I want you to know that did replace the kexts and put the dsdt's in place correctly, but one more time the things don't load... I don't touch the config.plist that you gave me...

 

Yes, this confirm that there's one drive that have another EFI installed on it. This is why i told you to remove them, but for config and kext it's just to confirm that we aren't doing something that will create interference or confusion. Not bad, just checking ^_^

Share this post


Link to post
Share on other sites
6 minutes ago, MorenoAv said:

that was the usb installer, now the only drive connected is the Mojave nothing else...

As you could see...

Diskutil list.rtf

 

Please remove the sata cable from the High Sierra drive, then boot, and open efi partition and then check that the files are there. We will work on Mojave drive first, please.

This damn autocorrection make mistake sometimes

Edited by ammoune78

Share this post


Link to post
Share on other sites

Already is removed the high Sierra are small partitions in Mojave ssd...

Share this post


Link to post
Share on other sites
2 hours ago, PMheart said:

Hi,

 

Looks like the patch applied to _xcpm_bootstrap is missing from your config. That might be why you are lacking of XCPM at all. By the way, do you need to disable that many registers? I guess you may only need to disable xcpm_pkg_scope_msrs. Oh, if you have locked 0xE2, then xcpm _idle_wrmsr patch should also be reserved. (Disable it if you do not)

Attached my modified config, FYI.

 

config.plist.zip

 

50 minutes ago, Fergarth said:

Thank you dear PMheart! I will test and I already report! And yes I have the Bios unlocked!

Once again, thank you PMheart! I tested but I still have something missing! It has gone from maximum frequency to just idle! ...

Captura de ecrã 2018-06-14, às 00.38.06.png

Captura de ecrã 2018-06-14, às 00.50.58.png

Edited by Fergarth

Share this post


Link to post
Share on other sites
3 minutes ago, MorenoAv said:

Already is removed the high Sierra are small partitions in Mojave ssd...

 

The files that we are working on are in the EFI of the Mojave SSD? If yes remove also the USB and reboot, and post IOREG with diskutil list

Share this post


Link to post
Share on other sites
4 hours ago, Carpentryplus25 said:

it is now apart of the Assets.car file within that same directory. You will need to find a way to extract the archived file and modify it then re archive it with a .car extension. I tried a few tools like cartoon and Asset Catalog Tinkerer with no success seems they haven't been updated to Mojave yet. You may have better luck in High Sierra with those apps. I didn't have time to try. You can see it here.

 

 

4 hours ago, Mc Jacej said:

utilities/systeminformation/show package contents/resources assets.car

 

 

Thanks.

HowTo edit .car with ThemeEngine + Photoshop.

/Applications/Utilities/System Information.app/Contents/Resources/Assets.car

done.

 

ok01.thumb.gif.1c73490e0f778f532d03a0f774c02963.gifok02.thumb.gif.fbd7198371566b90daca802085b8481b.gif

Edited by crazybirdy

Share this post


Link to post
Share on other sites
11 hours ago, crazybirdy said:

 

Where to change the SystemLogo?

 

01.gif.d557a1d2e18b65abad856a16829d1a47.gif

The location of the image: "Utilities/System Information.app/show package contents/resources/Assets.car

Inside the .car file you have 2 image files, SystemLogo@2x.png (512x512) and SystemLogo@1x.png (256x256)

To open the file and change the the image you need special tool and basic photoshop skills. 

If you want to, you can send me the Asset.car file, the image you want to be shown and I'll do it as soon as I can.

 

 

 

screen1.png

Edited by dzontra

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

×