Jump to content
fantomas1

[pre-release] macOS Mojave

2,463 posts in this topic

Recommended Posts

1 hour ago, arsradu said:

 

Works here, as well. I mean, I don't know what exactly are you trying to do...maybe there is a specific scenario in which it doesn't work, but...it does open up fine.

Which version did you try? Maybe they already released an update...and all you need is to install it? Would be too easy, I know. :)) But...who knows. Maybe it's stupid little things like these that we don't pay attention to, that cause the biggest troubles. I'm just saying. :) It's worth double checking.

Also, did you make a clean install of Mojave? Also, does ArchiCAD use Java....? If so...is it installed?

 

I'm not sure what you should see in Demo mode... Never used this software before. Looks like a pretty graphics intensive one (which makes perfect sense considering its purpose). But anyway, as I said, it does open up just fine. :)

990242697_Screenshot2018-06-11at10_22_39.thumb.png.4fc36c3f3ab7324249e6066d50d1fca7.png

Hey thanks for taking the time to load it!! 

Yeah it opens fine for me too but trying to actually draw a wall or anything results in endless spinning wheels.

I've just wiped my mojave and did a fresh install on a formatted SSD then a fresh install of Archicad (the latest version), but still bad.

I'll double check the java.

Thanks again man, I appreciate your help.

edit: Java is installed and seems ok. Hard to say if it's working fine or not :P

I'm not really bothered and I'm sure it'll get fixed. I'll put the mojave desktop on the HS for now and probably not even notice it's not Mojave haha.

Edited by surfinchina

Share this post


Link to post
Share on other sites
Advertisement

clover 4515 in first topic does not boot my disk, any way to make ssd bootable?, can only good from pen

 

used to have apple file in my clover, not anymore?

 

can't even mount volume Mojave is on

Edited by demos41

Share this post


Link to post
Share on other sites
26 minutes ago, surfinchina said:

Hey thanks for taking the time to load it!! 

Yeah it opens fine for me too but trying to actually draw a wall or anything results in endless spinning wheels.

I've just wiped my mojave and did a fresh install on a formatted SSD then a fresh install of Archicad (the latest version), but still bad.

I'll double check the java.

Thanks again man, I appreciate your help.

edit: Java is installed and seems ok. Hard to say if it's working fine or not :P

I'm not really bothered and I'm sure it'll get fixed. I'll put the mojave desktop on the HS for now and probably not even notice it's not Mojave haha.

 

It's actually the same for me with Adobe Lightroom. It's not endless spinning wheel. But it is very, very slow. Doing anything, moving any slider is laggy. And it is kind of annoying to use. It makes actually getting some work done pretty hard and frustrating. But hey, I didn't expect it to run smoothly from the very beginning.:)) And especially on a BETA. :))) So, yeah, I'm pretty happy that it actually runs. And, as I said before, and as the actual OS warns about (at least in my case), some apps are not yet optimised. This will most likely be fixed in the future.

 

Glad I could help! Took a while to download and install that software (at least on my rig). :))) I'm glad it wasn't for nothing. :)

Edited by arsradu

Share this post


Link to post
Share on other sites
46 minutes ago, SavageAUS said:

What is and where did you get the create install media app?

Sent from my SM-G930F using Tapatalk
 

 

Createinstallmedia is not an app. It's a component of the MacOS installer found in /Content/Resources/. And it is used to create USB installation media (such as a bootable USB drive).

 

931328980_ScreenShot2018-06-11at12_40_31.png.0f0ca33b6505b85138ab4a7962b10f14.png

 

  1. Download the MacOS 10.14 app from the App Store.
  2. Open up Terminal, and do this:
sudo /Applications/Install\ macOS\ 10.14\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled

This assumes that your USB drive is called Untitled, which is the default name. If that's not the case for you, make sure you adjust the name in the command above.

 

That should create a USB drive for you.

 

You can use the Clover installation of your HDD/SSD if you already have Clover installed. Or, you can try to install Clover on the actual USB driver, to make that one bootable, as well. Though I had issues with this method in the past (it's probably been fixed since then, but anyway). So I usually prefer to keep my USB installers intact, and use the Clover installation on my SSD to boot it. It will use that for future reboots anyway, after copying the installation files to the HDD/SSD.

 

Edited by arsradu

Share this post


Link to post
Share on other sites
3 minutes ago, arsradu said:

 

Createinstallmedia is not an app. It's a component of the MacOS installer. And it is used to create USB installation media (such as a bootable USB drive).

 

  1. Download the MacOS 10.14 app from the App Store.
  2. Open up Terminal, and do this:

sudo /Applications/Install\ macOS\ 10.14\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled

This assumes that your USB drive is called Untitled, which is the default name. If that's not the case for you, make sure you adjust the name in the command above.

 

That should create a USB drive for you.

 

You can use the Clover installation of your HDD/SSD if you already have Clover installed. Or, you can try to install Clover on the actual USB driver, to make that one bootable, as well. Though I had issues with this method in the past (it's probably been fixed since then, but anyway). So I usually prefer to keep my USB installers intact, and use the Clover installation on my SSD to boot it. It will use that for future reboots anyway, after copying the installation files to the HDD/SSD.

 

Yes I am aware of the terminal approach but on the desktop of the image I quoted under the system information screen you will see an iMac icon with createinstallmedia label.

 

Also to anyone else testing Mojave arr you using one of the osxwifi + BT cards? If so does it still work natively in Mojave? As I'm looking at getting one.

Edited by SavageAUS

Share this post


Link to post
Share on other sites
12 minutes ago, SavageAUS said:

Yes I am aware of the terminal approach but on the desktop of the image I quoted under the system information screen you will see an iMac icon with createinstallmedia label.

 

Also to anyone else testing Mojave arr you using one of the osxwifi + BT cards? If so does it still work natively in Mojave? As I'm looking at getting one.

 

Oh! I see it now. :D Sorry. I was like...what Create Install Media app? :))) Yeah, you're right. Now I see it too. Though, I have to say, it's the first time I see that app.

 

But...using my detective skills, and googling skills, I determined that it should be this app: https://github.com/chris1111/Create-Install-Media

As for your WiFI & BT adapter question, uhm, no, I'm not using something like that. So I can't really advise you on the matter. Though I did think about purchasing one. Not sure how useful would be...for a Desktop PC... I mean, that's pretty much what hold me back from purchasing one in the first place.

Edited by arsradu

Share this post


Link to post
Share on other sites

I installed Mojave and after installation finished I try to boot from HDD, starts booting, then grey screen with cursor appear and pc automatially restarts. How to fix it?

Share this post


Link to post
Share on other sites
13 minutes ago, ANONIMNIQ said:

I installed Mojave and after installation finished I try to boot from HDD, starts booting, then grey screen with cursor appear and pc automatially restarts. How to fix it?

Hmm...make sure you're using the exact same Clover config as the USB drive? That would be my first idea... It sounds like they are different. If it worked fine booting from the USB drive, it should work just as well booting from the HDD/SSD.

Edited by arsradu

Share this post


Link to post
Share on other sites
1 minute ago, arsradu said:

Hmm...make sure you're using the exact same Clover config as the USB drive? That would be my first idea... It sounds like they are different. If it worked fine booting from the USB drive, it should work just as well booting from the HDD/SSD.

I mean I load Clover from the USB drive and select to boot Mojave installation from HDD. 

Share this post


Link to post
Share on other sites
1 minute ago, ANONIMNIQ said:

I mean I load Clover from the USB drive and select to boot Mojave installation from HDD. 

Well, make sure you boot from the same USB drive then, until you put Clover on the HDD, as well. :)

Share this post


Link to post
Share on other sites
2 minutes ago, arsradu said:

Well, make sure you boot from the same USB drive then, until you put Clover on the HDD, as well. :)

Yes I boot from the same USB drve, Installer from the USB work just fine, after restart installation continue from HDD fine too, after finish installation PC restart, I boot to Clover again and select HDD partition with macos Mojave, starts booting, after few secconds grey screen with cursor appear and PC restarts automatically.

Share this post


Link to post
Share on other sites
Just now, ANONIMNIQ said:

Yes I boot from the same USB drve, Installer from the USB work just fine, after restart installation continue from HDD fine too, after finish installation PC restart, I boot to Clover again and select HDD partition with macos Mojave, starts booting, after few secconds grey screen with cursor appear and PC restarts automatically.

Sorry, I think I might have gotten it wrong. :) My bad.

 

Could you, please, remove all the serials in your config plist SMBIOS and RT variable, and upload your Clover folder for analysis? Looks like you might have a KP somewhere. Weird that the installation worked fine...

 

Also, try to boot in Verbose mode. See where it crashes.

Share this post


Link to post
Share on other sites
7 minutes ago, ANONIMNIQ said:

Yes I boot from the same USB drve, Installer from the USB work just fine, after restart installation continue from HDD fine too, after finish installation PC restart, I boot to Clover again and select HDD partition with macos Mojave, starts booting, after few secconds grey screen with cursor appear and PC restarts automatically.

I saw your old post with ASUS P5Q-VM Intel® Core™2 DuoE8400 (6M Cache, 3.00 GHz) 4GB ram NVIDIA Quadro 600 - 1 GB

 

It's the same as mine, Core 2 Duo E8400 (SSE4.1 only, no SSE4.2) + GT 640 1G, after installation success, boot to system restarting on gray screen and mouse. (GPT + APFS, Clover 4522. Works fine with 10.13.6)

 

I think it's the end for SSE4.1 cpu now. :angel:

Share this post


Link to post
Share on other sites
25 minutes ago, arsradu said:

Sorry, I think I might have gotten it wrong. :) My bad.

 

Could you, please, remove all the serials in your config plist SMBIOS and RT variable, and upload your Clover folder for analysis? Looks like you might have a KP somewhere. Weird that the installation worked fine...

 

Also, try to boot in Verbose mode. See where it crashes.

Here is screenshot from verbose mode. After this grey screen with cursor appear and PC restarts.

I can't access EFI partition on USB drive form Windows, I'm not sure why, should try later from virtual machine and will post my Clover folder.

IMG_20180611_134839.jpg

22 minutes ago, crazybirdy said:

I saw your old post with ASUS P5Q-VM Intel® Core™2 DuoE8400 (6M Cache, 3.00 GHz) 4GB ram NVIDIA Quadro 600 - 1 GB

 

It's the same as mine, Core 2 Duo E8400 (SSE4.1 only, no SSE4.2) + GT 640 1G, after installation success, boot to system restarting on gray screen and mouse. (GPT + APFS, Clover 4522. Works fine with 10.13.6)

 

I think it's the end for SSE4.1 cpu now. :angel:

I'm with a little diferent configuration now, but still old. High Serra works fine.

 

Gigabyte GA-G41M-Combo v2  Intel Core 2 Duo E8400, 3000 MHz 4gb ram Quadro FX 1800  (768 MB) 

Share this post


Link to post
Share on other sites
8 minutes ago, ANONIMNIQ said:

I'm with a little diferent configuration now, but still old. High Serra works fine.

 

Gigabyte GA-G41M-Combo v2  Intel Core 2 Duo E8400, 3000 MHz 4gb ram Quadro FX 1800  (768 MB) 

 

Core 2 Duo E8400 (SSE4.1 only, no SSE4.2)

Still the same CPU, the same problem. I didn't find anyone work without SSE4.2 now. Need next lucky beta.:)

Share this post


Link to post
Share on other sites
11 minutes ago, ANONIMNIQ said:

Here is screenshot from verbose mode. After this grey screen with cursor appear and PC restarts.

I can't access EFI partition on USB drive form Windows, I'm not sure why, should try later from virtual machine and will post my Clover folder.

IMG_20180611_134839.jpg

I'm with a little diferent configuration now, but still old. High Serra works fine.

 

Gigabyte GA-G41M-Combo v2  Intel Core 2 Duo E8400, 3000 MHz 4gb ram Quadro FX 1800  (768 MB) 

 

Which Clover version are you using? 

Share this post


Link to post
Share on other sites
2 hours ago, SavageAUS said:

Also to anyone else testing Mojave arr you using one of the osxwifi + BT cards? If so does it still work natively in Mojave? As I'm looking at getting one.

 

For desktop and laptop native support Wifi/Bluetooth

Desktop BCM94360CD

Laptop BCM94360HMB 

eBay links

Share this post


Link to post
Share on other sites
54 minutes ago, ammoune78 said:
  For desktop and laptop native support Wifi/Bluetooth Desktop BCM94360CD Laptop BCM94360HMB 

eBay links

Thanks. I'm hoping they re add support for atheros in Mojave as the first beta dropped Atheros40 <--- i think thats the kext name i re added from high sierra. If they dont add support back for atheros then ill be after WiFi +BT for my desktop but if they do add atheros support back then ill just need native bluetooth support.

Sent from my SM-G930F using Tapatalk

Edited by SavageAUS

Share this post


Link to post
Share on other sites
2 hours ago, crazybirdy said:

I saw your old post with ASUS P5Q-VM Intel® Core™2 DuoE8400 (6M Cache, 3.00 GHz) 4GB ram NVIDIA Quadro 600 - 1 GB

 

It's the same as mine, Core 2 Duo E8400 (SSE4.1 only, no SSE4.2) + GT 640 1G, after installation success, boot to system restarting on gray screen and mouse. (GPT + APFS, Clover 4522. Works fine with 10.13.6)

 

I think it's the end for SSE4.1 cpu now. :angel:

 

Forum Macrumors has confirmed that Core2Due working on Mojave as its shown in the screenshot:

 

1127488136_ScreenShot2018-06-11at12_45_52PM.thumb.png.40ffe971a5b9a8d920b88f8b705620b2.png

 

Just search on the net, you'll find the fix ^_^

Share this post


Link to post
Share on other sites
11 minutes ago, SavageAUS said:

Thanks. I'm hoping they re add support for atheros in Mojave as the first beta dropped Atheros40
Sent from my SM-G930F using Tapatalk
 

 

Broadcom cards give continuity support, i can receive calls on my laptop hack with Atheros, but missing airplay, airdrop and other things. 

Share this post


Link to post
Share on other sites
5 minutes ago, ammoune78 said:

 

Forum Macrumors has confirmed that Core2Due working on Mojave as its shown in the screenshot:

 

1127488136_ScreenShot2018-06-11at12_45_52PM.thumb.png.40ffe971a5b9a8d920b88f8b705620b2.png

 

Just search on the net, you'll find the fix ^_^

01.thumb.png.8b35273818522d4a85da83f3559ba85e.png02.thumb.png.43650a62eb3f109d44497e743875edfb.png

03.thumb.png.a71cf29aa18eb24c8476e20073329e5a.png

04.thumb.png.089a4117157966c3daf26ff3d5917566.png

 

Thanks for your info, I already tried it, found nothing more than above.

I'm not sure, it's really boot into the installed Mojave system or not?

 

Share this post


Link to post
Share on other sites

I do not have a LGA775 socket components to test it, but you have to review your config.plist and check your DSDT or graphics card, it might be a trick for that! If people not only one user, but users confirmed that it work, then you just have to check or ask for a config.plist that already working!

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

×