Cclown98 Posted June 30, 2018 Share Posted June 30, 2018 Specifications Processor :Intel Core i7 7700K @ 4.10GHz - 4.5GHz Graphics Processor(GPU) :Intel HD Graphics 630 ASUS RX560 OC 2GB Motherboard :MSI B250 Krait Gaming Chipset :Intel B250 Express Hard disk :223GB KINGSTONE-A400 (SSD) (WORKING/MAX SPEED) RAM :8GB DDR4 2600 MHz ADATA Wifi :TP-LINK WN823N Wireless Network Adapter LAN :Intel I219V Audio :Realtek High Definition Audio ALC892 USB 3.0 :Intel Panther Point PCH - USB 3.0 xHCI Controller Interface : 6 x SATA-600, 2 x M.2 1 x USB-C Gen 2 + 1 x USB 3.1 Gen 2 + 2 x USB 3.1 Gen 1 + 2 x USB 2.0 1x DVI-D, 1x HDMI - Board 1x LAN 1x PS/2 keyboard / mouse High Definition Audio (8-channel) Graphics Processor: Intel HD 630 is partially working (256 mb set by bios) - Asus RX560 OC card is working perfectly. Wifi: WN823N is fully working. LAN: Intel I219V is fully working. Audio: Audio Works Trim: Trim Enabled via sudo trimforce enable I'm actually on 10.13.5 Is there any way i could get both (iGPU and eGPU) working well hd 630 is recognized as a PCI device but it won't appear on graphic cards in the system report, on PCI devices it says compatible with VGA device, also in iStats app the use of memory is always the same and the iGPU processors says 0 MHz, the worth thing is that any screen connected to the IGPU wont be recognized i've tried via DVI-D and HDMI. Im so sorry I forgot to put my OS in English. Send me iMacdeCclown98.zip Link to comment Share on other sites More sharing options...
Picasso Posted July 1, 2018 Share Posted July 1, 2018 Modificando tu ig-platform-id. Fijate las opciones que tenés para tu smbios. Igualmente, a varios le da error, problemas en h264, o green screen en safari. Tene conectado tu monitor al AMD. Y en el bios, que ambos estén activados. Si llegás a tener black screen al bootear, anula el inject desde las opciones de Clover y volvé a tu original. Link to comment Share on other sites More sharing options...
Cclown98 Posted July 1, 2018 Author Share Posted July 1, 2018 37 minutes ago, Picasso said: Modificando tu ig-platform-id. Fijate las opciones que tenés para tu smbios. Igualmente, a varios le da error, problemas en h264, o green screen en safari. Tene conectado tu monitor al AMD. Y en el bios, que ambos estén activados. Si llegás a tener black screen al bootear, anula el inject desde las opciones de Clover y volvé a tu original. ya probé utilizando todas las injecciones recomendadas con smbios 18,3 y tambien los fakes id, simplemente no logro obtener imagen de la board, la necesito para el tercer monitor Link to comment Share on other sites More sharing options...
Picasso Posted July 1, 2018 Share Posted July 1, 2018 Me da que es algun seteo del Bios. Bootea con intel. Chequea el kext intelfixup. A mi me paso eso en mother asus, pero se me colgaba el final cut y lo dejé con la AMD. Link to comment Share on other sites More sharing options...
Cclown98 Posted July 1, 2018 Author Share Posted July 1, 2018 Anybody? (up) Link to comment Share on other sites More sharing options...
MaLd0n Posted July 2, 2018 Share Posted July 2, 2018 -IntelGFX = 59128086 -IgPlatformId = 59120003 -InjectIntel -Enable Intel HD bios -Shiki -if need Shiki flag, i use Shikigva=60 u need only 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted July 2, 2018 Share Posted July 2, 2018 if u need a full work, try with IgPlatformId = 59120000 1 Link to comment Share on other sites More sharing options...
Cclown98 Posted July 2, 2018 Author Share Posted July 2, 2018 35 minutes ago, MaLd0n said: if u need a full work, try with IgPlatformId = 59120000 i tried with 59120003 <- no image 59120000 <- kernel panic im getting quicksync by using igfxfw=1 and removing the -disablegfxfirmware with 59120003 without connecting screens on board Link to comment Share on other sites More sharing options...
MaLd0n Posted July 2, 2018 Share Posted July 2, 2018 22 minutes ago, Cclown98 said: i tried with 59120003 <- no image 59120000 <- kernel panic im getting quicksync by using igfxfw=1 and removing the -disablegfxfirmware with 59120003 without connecting screens on board hmmm i don't use thirty party kexts for video, work perfect u can check some way here http://olarila.com/forum/viewtopic.php?f=59&t=6428 1 Link to comment Share on other sites More sharing options...
lametal410 Posted August 30, 2018 Share Posted August 30, 2018 On 7/2/2018 at 10:43 AM, MaLd0n said: hmmm i don't use thirty party kexts for video, work perfect u can check some way here http://olarila.com/forum/viewtopic.php?f=59&t=6428 It work. but h.264 acceleration not work Link to comment Share on other sites More sharing options...
MaLd0n Posted August 30, 2018 Share Posted August 30, 2018 use only whateveergreen now for video Link to comment Share on other sites More sharing options...
Recommended Posts