Jump to content
firstmiro

GA-Z170X-UD5 TH with Thunderbolt working High Sierra?

5 posts in this topic

Recommended Posts

Hi,

 

I need help with fixing Thunderbolt on High Sierra and GA-Z170X-UD5 TH mobo.

 

Anyone who is willing to invest some time, and share his knowledge (DSDT/SSDT) with me?

Can be commercial help ;-)

 

Setup:

  • GA-Z170X-UD5 TH
  • i7-7700K
  • Radeon RX 580, 8GB

  • Crucial MX500 SSD
  • 32GB RAM
  • Broadcom BCM43xx (AirPort Extreme) WiFi + Bluetooth

  • Clover

  • Windows 10 dual boot (separate disk)

 

System is up and running. Sleep, shutdown, power management - fully working.

 

Whatever I will do - no way to keep Thunderbolt on. But - it is on the system. Sometimes it works (randomly after restart).

 

As mentioned above - any help (commercial also) fully appreciated.

 

Best,

fm

 

 

Share this post


Link to post
Share on other sites
Advertisement

I have this motherboard and I have Thunderbolt working in High Sierra.

But it is possible if a device already inserted into thunderbolt (for example USB-C to USB-3 adapter) because PCIe has no hot plug in MacOS.

TB.PNG

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By chebkhaled1960
      Hello everyone
       
      After installing High Sierra

      I have this problem
      Unsupported CPU - Unsupported PCH
      Like in the picture

      Is that normal or i should to care about it ?


      HP Z420 WORKSTATION
      Intel Patsburg C600/X79, Intel Sandy Bridge-EP
      QUAD CORE INTEL XEON E5-1620 03.60 GHz
      RAM: 22 GB ECC RDDR3
      GPU: 2GB NVIDIA GTX 730
       
       

    • By fusion71au
      Making a High Sierra USB Installer Entirely From Scratch in Windows
      This is a proof of concept tutorial, to show it's possible to create a vanilla High Sierra installer, entirely from scratch, in Windows (even without App Store downloaded "Install macOS High Sierra.app" from a real Mac ).  @PikeRAlpha's link to Apple's Software Catalog provides us with all the URLs necessary to download the needed files directly from Apple instead of some dubious source from the internet...
       

      Pre-Requisites
      8GB or larger USB drive Boot Disk Utility v2.1.2017rev021b from @CVAD TransMac (free 15 day trial) Paragon Hard Disk Manager Free Download Installer Files Directly from Apple
      1)  Browse Apple's Regular Software Catalog and find the URLs to download the following 6 installer files...
      BaseSystem.dmg BaseSystem.chunklist InstallInfo.plist InstallESDDmg.pkg AppleDiagnostics.dmg AppleDiagnostics.chunklist (Hint - search page for "InstallESD" to find its URL and others nearby)

      to a folder named "SharedSupport" on your Windows NTFS drive.  A browser download manager (eg Chrono for Chrome, dTA for FireFox) is handy since InstallESD is >4GB ---> allows you to pause/resume interrupted download...

      2)  Rename InstallESDDmg.pkg to InstallESD.dmg
      3)  Edit InstallInfo.plist with WordPad/text editor to remove the chunklistURL and chunklistid keys for InstallESD, and renaming it from InstallESDDmg.pkg to InstallESD.dmg (example of edited file attached to this post)...
      Note:  You can verify the SHA1 checksum of your InstallESD.dmg and BaseSystem.dmg with the correct ones at this website.
      Boot Disk Utility to format the Installer USB and Restore OS X Base System HFS partition
      1.  Format USB with BDU & latest Clover ---> creates boot files in CLOVER partition + second FAT partition
      2.  Extract 4.hfs from \SharedSupport\BaseSystem.dmg with BDU --> save to it's local folder
      3.  Restore 4.hfs to USB second partition with BDU --->  2nd partition becomes bootable "OS X Base System"
      Paragon Hard Disk Manager to extend HFS Partition to its Full Extent
      Open Paragon Partition Manager Free and resize the second partition of the USB drive to the full size allowed.  Don't forget to apply the changes at the end...
      Transmac to Copy "SharedSupport" folder to OS X Base System
      1.  Open the TransMac program and navigate to the HFS+ Volume/Install macOS High Sierra.app/Contents folder.  Right click anywhere in the empty space on the RHS pane and select "Copy Here"...
      2.  In the next stage, select the "SharedSupport" folder we created above as the "Files and Folders to be copied to the Mac Volume"...
      Clover Settings
      Clover configuration is required now.  The default config.plist (in the Clover FAT32 partition of the USB) maybe sufficient to boot your machine if you’re lucky.  If not, look at the Clover Wiki, Clover Instructions and Clover Configuration Thread for pointers and edit /EFI/Clover/config.plist accordingly with Wordpad or Notepad.
      The location of the important configuration files for Clover are summarized below
      config.plist--->EFI/CLOVER folder DSDT.aml with or without SSDT.aml--->EFI/CLOVER/ACPI/patched (don't need one if your DSDT is auto patched by Clover in config.plist) Kexts eg FakeSMC, NullCPUPowerManagement --->EFI/CLOVER/kexts/<osx version> or /Other. NB BootDiskUtility by default already has FakeSMC.kext installed here.  You may need to add VoodooPS2Controller for your laptop keyboard/trackpad to work. If UEFI booting, you will most likely need one of the OsxAptioFixDrv-64 drivers copied from /EFI/CLOVER/drivers-off/drivers64UEFI to /EFI/CLOVER/drivers64UEFI. If you want to use the installer to run High Sierra in Windows on VMware, you can follow my guide to set up the Virtual Machine and replace Clover's default config with EFI_Clover for VMware (which is compatible to run in VMware).  In the screenshots below, I have attached the USB Installer (in this case PhysicalDrive7) to my macOS Virtual Machine.  Reboot the system to the USB installer to install High Sierra ...
      What happens if we don't have access to TransMac or Paragon Hard Disk Manager?
      Not a problem, as long as we get "OS X Base System" bootable, we can launch terminal from the Utilities Menu to copy the SharedSupport folder over to the Installer app.  In essence, we will build the full installer app = 5GB+ on the target HD eg "Macintosh HD", by copying both the "small" installer app = 15MB (on "OS X Base System") and the SharedSupport folder from the NTFS volume (mounted in this example on /Volumes/DATA)...
      -bash-3.2# cd / -bash-3.2# cp -R Install\ macOS\ High\ Sierra.app /Volumes/Macintosh\ HD/ -bash-3.2# cp -R /Volumes/DATA/SharedSupport /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app/Contents/  
      ...then start installation with the startosinstall utility...
      -bash-3.2# /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app/Contents/Resources/startosinstall --volume /Volumes/Macintosh\ HD --converttoapfs NO --applicationpath /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app  
      The above steps can be automated with the attached "startosinstall.command" script, which will assemble "Install macOS High Sierra.app" on "Macintosh HD" and launch the startosinstall utility targeting the "Macintosh HD" volume.  Copy/download to "Macintosh HD", then run in terminal (after attaching DATA USB with /Shared Support folder)...
      cd "/Volumes/Macintosh HD" chmod +x startosinstall.command ./startosinstall.command Updated Download Links for macOS Mojave 10.14GM
      Browse Apple's Developer Beta Software Catalog and find the URLs to download the following 6 installer files...
      BaseSystem.dmg BaseSystem.chunklist InstallInfo.plist InstallESDDmg.pkg AppleDiagnostics.dmg AppleDiagnostics.chunklist  
      startosinstall.command.zip
       
      InstallInfo.plist_edited_10.14beta1.zip
      InstallInfo.plist_edited_10.13.6.zip
    • By BrianWong11031
      Hi, there
      My desktop hackintosh cannot enter the Sleep Mode.
      I mean it can enter the sleep mode for a few seconds and it will automatically wake up itself.
      How can I fix this issue.
      Thanks for your help.
       
      My BIOS / APM capture:

      My system preference / Energy Saver capture:

       
       
    • By duole
      Dear Anyone
      Im looking for a dmg file for Dell XPS 13 9343 included clover + driver... for transmac restore
      ps: im super newbie
      Thanks!
    • By ivoryblade
      Hello! My internal SSD lifetime is running out so I'm thinking how to upgrade it. I don't want to replace it with slow Sata SSD so I want to buy OWCMercury Helios and install new nvme fast ssd, but I won't be able to boot from it using standard boot loader.... Is it possible to boot nvme ssd using Clover on real iMac?
×