Clover r5051 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
1. Download and unzip "EFI_Clover_r5051 for VMware.zip". Mount Clover-v2.5k-5051-X64.iso by double clicking on it.
2. Mount your VM's EFI System Partition eg in terminal
sudo diskutil mount disk0s1 3. Copy EFI folder from step 1 into the EFI partition
4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
Making a bootable High Sierra USB Installer Entirely From Scratch in Windows or Linux Mint (without access to Mac or App Store Installer.app)By fusion71au
Making a High Sierra USB Installer Entirely From Scratch in Windows
This is a proof of concept tutorial, to show it's possible to create a vanilla High Sierra installer, entirely from scratch, in Windows (even without App Store downloaded "Install macOS High Sierra.app" from a real Mac ). @PikeRAlpha's link to Apple's Software Catalog provides us with all the URLs necessary to download the needed files directly from Apple instead of some dubious source from the internet...
8GB or larger USB drive Boot Disk Utility v2.1.2017rev021b from @CVAD TransMac (free 15 day trial) Paragon Hard Disk Manager Free Download Installer Files Directly from Apple
1) Browse Apple's Regular Software Catalog and find the URLs to download the following 6 installer files...
BaseSystem.dmg BaseSystem.chunklist InstallInfo.plist InstallESDDmg.pkg AppleDiagnostics.dmg AppleDiagnostics.chunklist (Hint - search page for "InstallESD" to find its URL and others nearby)
to a folder named "SharedSupport" on your Windows NTFS drive. A browser download manager (eg Chrono for Chrome, dTA for FireFox) is handy since InstallESD is >4GB ---> allows you to pause/resume interrupted download...
2) Rename InstallESDDmg.pkg to InstallESD.dmg
3) Edit InstallInfo.plist with WordPad/text editor to remove the chunklistURL and chunklistid keys for InstallESD, and renaming it from InstallESDDmg.pkg to InstallESD.dmg (example of edited file attached to this post)...
Note: You can verify the SHA1 checksum of your InstallESD.dmg and BaseSystem.dmg with the correct ones at this website.
Boot Disk Utility to format the Installer USB and Restore OS X Base System HFS partition
1. Format USB with BDU & latest Clover ---> creates boot files in CLOVER partition + second FAT partition
2. Extract 4.hfs from \SharedSupport\BaseSystem.dmg with BDU --> save to it's local folder
3. Restore 4.hfs to USB second partition with BDU ---> 2nd partition becomes bootable "OS X Base System"
Paragon Hard Disk Manager to extend HFS Partition to its Full Extent
Open Paragon Partition Manager Free and resize the second partition of the USB drive to the full size allowed. Don't forget to apply the changes at the end...
Transmac to Copy "SharedSupport" folder to OS X Base System
1. Open the TransMac program and navigate to the HFS+ Volume/Install macOS High Sierra.app/Contents folder. Right click anywhere in the empty space on the RHS pane and select "Copy Here"...
2. In the next stage, select the "SharedSupport" folder we created above as the "Files and Folders to be copied to the Mac Volume"...
Clover configuration is required now. The default config.plist (in the Clover FAT32 partition of the USB) maybe sufficient to boot your machine if you’re lucky. If not, the hackintosh-vanilla-desktop-guide has some good explanations on the various settings available and also offers sample configuration files based on CPU type. Also, look at the Clover Wiki, Clover Instructions and Clover Configuration Thread for pointers and edit /EFI/Clover/config.plist accordingly with Wordpad or Notepad.
The location of the important configuration files for Clover are summarized below
config.plist--->EFI/CLOVER folder DSDT.aml with or without SSDT.aml--->EFI/CLOVER/ACPI/patched (don't need one if your DSDT is auto patched by Clover in config.plist) Kexts eg FakeSMC, NullCPUPowerManagement --->EFI/CLOVER/kexts/<osx version> or /Other. NB BootDiskUtility by default already has FakeSMC.kext installed here. You may need to add VoodooPS2Controller for your laptop keyboard/trackpad to work. If UEFI booting, you will most likely need one of the OsxAptioFixDrv-64 drivers copied from /EFI/CLOVER/drivers-off/drivers64UEFI to /EFI/CLOVER/drivers64UEFI. If you want to use the installer to run High Sierra in Windows on VMware, you can follow my guide to set up the Virtual Machine and replace Clover's default config with EFI_Clover for VMware (which is compatible to run in VMware). In the screenshots below, I have attached the USB Installer (in this case PhysicalDrive7) to my macOS Virtual Machine. Reboot the system to the USB installer to install High Sierra ...
What happens if we don't have access to TransMac or Paragon Hard Disk Manager?
Not a problem, as long as we get "OS X Base System" bootable, we can launch terminal from the Utilities Menu to copy the SharedSupport folder over to the Installer app. In essence, we will build the full installer app = 5GB+ on the target HD eg "Macintosh HD", by copying both the "small" installer app = 15MB (on "OS X Base System") and the SharedSupport folder from the NTFS volume (mounted in this example on /Volumes/DATA)...
-bash-3.2# cd / -bash-3.2# cp -R Install\ macOS\ High\ Sierra.app /Volumes/Macintosh\ HD/ -bash-3.2# cp -R /Volumes/DATA/SharedSupport /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app/Contents/
...then start installation with the startosinstall utility...
-bash-3.2# /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app/Contents/Resources/startosinstall --volume /Volumes/Macintosh\ HD --converttoapfs NO --applicationpath /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app
The above steps can be automated with the attached "startosinstall.command" script, which will assemble "Install macOS High Sierra.app" on "Macintosh HD" and launch the startosinstall utility targeting the "Macintosh HD" volume. Copy/download to "Macintosh HD", then run in terminal (after attaching DATA USB with /Shared Support folder)...
cd "/Volumes/Macintosh HD" chmod +x startosinstall.command ./startosinstall.command Updated Download Links for macOS Mojave 10.14.6_18G87
Browse Apple's Regular Software Catalog and find the URLs to download the following 6 installer files...
BaseSystem.dmg BaseSystem.chunklist InstallInfo.plist InstallESDDmg.pkg AppleDiagnostics.dmg AppleDiagnostics.chunklist
Note: In Mojave, Apple has removed the --converttoapfs NO and --applicationpath arguments from the startosinstall utility....
eg to use startosinstall for the above section "What happens if we don't have access to TransMac or Paragon Hard Disk Manager?", the syntax is now
-bash-3.2# /Volumes/Macintosh\ HD/Install\ macOS\ Mojave.app/Contents/Resources/startosinstall --volume /Volumes/Macintosh\ HD
This basically means that for Mojave, the default installation will always convert the target volume to the apfs file system.
I have a working hackintosh....ok.....but it takes a lot to boot and according to the boot.log there are a few problems.
One of them is a black screen that stays on for a long time.
I would like to ask anyone in this community some help to fine tune my machine.
Boot.log and config.plist attached
Any help would be appreciated.
Hi everyone !
I build a new os on High Sierra and i have problem with my Skarkoon RAID 5 - 5 bay, is unmounting, work fine in windows but not in Mac Os.
I use a card eSata in chipset Marvell 88SE9215, and i have the kext 3-party eSata but nothings change.
I try with the AppleAHCIPort.kext v328, nothings change.
Any solution ?
Thanks a lot !
Config : GA-Z68X-UB3-B3 // BIOS UEFI, Version: U1f //
I have what's been said to be a natively supported wifi card, but for the life of me I cannot get it working properly with High Sierra. It is detected in DPCIManager but the wifi symbol at the top is hollowed and I can't turn it on.
Here's some basic info about my hackintosh. It's running an i7 9700k with an MSI Z390-A PRO, a GTX 1070, and it's SMBIOS is running as an iMac 18.1
Someone else has posted here about this with an ac66, which I think is very similar and uses the same device number 43A0. But he didn't get his problem solved in the end. And I have looked up this problem in a million different ways, I haven't found a solution that works from any yet.
I've tried a large amount of different kext patches, kexts (fakepciid, airportbrcmfixup, etc), changing fake ID, modifying kext info.plist files, and every combination of those, none have gotten it to properly work.
I have gotten it to work in one way but it's so unstable that it's unusable. Using the IO80211family.kext from yosemite works, but then it will randomly freeze about 10-15 minutes in, and then it'll not boot 9/10 times, and when it will it'll freeze on the login or right after. It gives errors about out of date kext, only way get back in is by reinstalling. So I figure this method is unusable.
I'm just stumped on why a supposed confirmed working out of box card doesn't just just work, even with every amount of tweaking and adding kexts. I'm in my 4th day of almost nonstop testing and researching on how to fix this, and I'm too stubborn and determined to just buy a different card. Any suggestions would be greatly appreciated.