angel___eyes Posted June 22, 2018 Share Posted June 22, 2018 (edited) CONFIG: Intel Pentium G3220 @ 3.00 Ghz ASUS H81M-CS - Rev. 1.0 - UEFI Bios 0402 (Lan - Realtek 8111GR | Audio - ALC 887) 4GB DDR 3 HDD 500GB SATA Nvidia 210 1GB VGA Monitor I have this config with me, and need to learn xcode.... Needed to know will i be able to install High Sierra on this rig...? Edited July 8, 2018 by angel___eyes Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 22, 2018 Share Posted June 22, 2018 11 hours ago, angel___eyes said: Intel Pentium G3220 @ 3.00 Ghz ASUS H81M-CS - Rev. 1.0 - UEFI Bios 0402 (Lan - Realtek 8111GR | Audio - ALC 887) 4GB DDR 3 HDD 500GB SATA Nvidia 210 1GB VGA Monitor I have this config with me, and need to learn xcode.... Needed to know will i be able to install High Sierra on this rig...? I guess you will be able to install macOS High Sierra on your rig, but you might need to use a FakeCPUID if you encounter any sort of Kernel Panic upon boot. Apple officially never used any IvyBridge pentium CPUs in their products but you can give it a try, aside the CPU all other components should work but you might run into some issues with the VGA monitor and as far as I know pentium iterated GPUs are not supported by macOS. Link to comment Share on other sites More sharing options...
angel___eyes Posted July 8, 2018 Author Share Posted July 8, 2018 pals, installed high sierra perfectly using fakecpuid, attached is the config clover file... other ten that, applied the audio ALC 887 from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] to the config file. the issue is, when i start the system, it takes over 2 min to start... attached is the screen with -v option after this screen, the system starts.... needed to know how to solve the issue.... also when i shutdown the system..... the below msg popsup.... needed help to rectify the issues... fore a perfect system...... thanx config.plist Link to comment Share on other sites More sharing options...
angel___eyes Posted July 10, 2018 Author Share Posted July 10, 2018 pals, any help? Link to comment Share on other sites More sharing options...
angel___eyes Posted July 11, 2018 Author Share Posted July 11, 2018 pals, the delay issue has been fixed by removing the nvidiagfxpatchfix file from extensions folder... which i had used previously for my nvidia 710. but the improper shutdown issue still prevails, pals, needed help in proper shutdown. thanx Link to comment Share on other sites More sharing options...
Recommended Posts