Jump to content
moman2000

[WIP][Success] Z97X-UD5H i7-4770k running Mojave Beta 1

15 posts in this topic

Recommended Posts

Hi,

 

I thought it would be nice that I would be the first here to give my experience with getting Mojave running and mostly working on my system.

 

My specifications are as follows:

 

iMac 14,2

 

GIGABYTE GA-Z97X-UD5H / Intel Core i7-4770k @ 4.4GHz / 16GB Corsair Vengeance DDR3 @ 1600MHz

MSI AMD Radeon HD 7870 2GB OC

250GB SanDisk Ultra 3D NAND SSD / 120GB OCZ Agility 3 SSD

1TB 5.4K HDD

 

I used the config that @MaLd0n helped me with. Seriously, he is a legend. HERE is my Clover Config including everything I use for 10.13 High Sierra and 10.14 Mojave.

 

Installation Procedure:

 

 

Create bootable USB media with createinstallmedia - sudo /Applications/Install\ macOS\ 10.14\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/"Insert Volume Name here"  ***** Remove quotation marks!!! 

 

**"--Applicationpath" is now depreciated and should not be used when making a 10.14 Mojave USB. I do not know if this will change in upcoming releases.

 

** ConvertToAPFS is now depreciated and no longer works when installing 10.14 Mojave beta 1. Using the command "--converttoapfs NO" will not work if you use it with "createinstallmedia".

 

Editing "minstallconfig.xml" within the "macOS Install Data" folder on the target partition chosen during installation to change "ConvertToAPFS" from "TRUE" to "FALSE" would also not disable APFS conversion.

 

Installation ran through well, but it did restart just after installation began which seemed to have been caused by a crash, but it seemed like it was normal as this happened twice as I tried installing Mojave earlier and the same thing happened. Rebooting again into the installation on the target drive that was selected before described as "macOS Install"  and named "macOS 10.14" resumed installation.

 

Everything from then on was easy and smooth. I set-up my iCloud and things as such and was brought to the desktop of macOS 10.14 Mojave!

 

 

What does work:

 

Graphics (Acceleration/Metal) // 4K video dropped 0 frames // Picture-in-Picture

Mouse and Keyboard

USB 3.0 -  Full 5 GBP/s - Only ports above HDMI Port and front I/O

USB 3.0 under both Intel and Killer Ethernet ports function with USB 2.0 devices.

Ethernet (only Intel NIC so far) Both NIC's work, Intel I217-V and Killer E2200

iMessage

Sleep and Wake

Shutdown

Restart

 

Update #1:

 

Temporary Fix: ***I have gotten audio to work after browsing Reddit, I stumbled across this post: https://www.reddit.com/r/hackintosh/comments/8orn7w/mojave_files_needed/e05kkj9/

 

Update #2:

 

I have just found a kext for the on-board Killer E2200 NIC after searching with device and vendor ID's on this forum.

https://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/

 

Update #3:

 

Audio is now fully operational with new version 1.2.8 of AppleALC, from here: 

 

What does NOT work:

 

USB 3 under Intel I217-V NIC and Killer E2200 NIC Ethernet Ports // Only function with USB 2.0 devices.

Audio Temporary fix in Update #1 above   Fixed in Update #3

Killer E2200 NIC Fixed in Update #2 above

 

 

 

This is the information I have been able to gather thus far whilst using Mojave.

 

I hope this helps someone in getting Mojave running on their system.

 

Regards,

Mohamed

 

 

CLOVER_moman2000 No SN.zip

About This Mac.png

Displays.png

Memory.png

Storage.png

App Store.png

News.png

System Preferences.png

Edited by moman2000
Addition of Screenshots and text changes

Share this post


Link to post
Share on other sites
Advertisement

Update #2:

 

I have just found a kext for the on-board Killer E2200 NIC after searching with device and vendor ID's on this forum. 

 

 

Share this post


Link to post
Share on other sites
2 hours ago, jlrycm said:

What GPU you have?

MSI AMD Radeon HD 7870 2GB OC.

 

I just realised I have not included that in my signature. :)

 

EDIT: Now included in my signature 

Edited by moman2000

Share this post


Link to post
Share on other sites

Very nice, I have a similar system GA Z97 i7 4790k works great I used voodooHDAkext no problem works good, and I have a R7 265 (R9 270x -a few circuits).  HD 4600 also works. Everything works well E2200 kext from Mieze works great.    WiFi BCM 4360 ac.

Share this post


Link to post
Share on other sites

use new patch usb for Mojave, by PMHeart

 

com.apple.driver.usb.AppleUSBXHCI

83FB0F0F 83090500 00

83FB0F90 90909090 90

Change 15 port limit

10.14.x

Share this post


Link to post
Share on other sites
3 hours ago, Gigamaxx said:

Very nice, I have a similar system GA Z97 i7 4790k works great I used voodooHDAkext no problem works good, and I have a R7 265 (R9 270x -a few circuits).  HD 4600 also works. Everything works well E2200 kext from Mieze works great.    WiFi BCM 4360 ac.

 

Thank you. I wasn't at all surprised to see Mojave be so easy to install as its so similar to High Sierra. Congrats on your system. For audio have a look at my config.plist for the patches and also the kexts in the kexts folders. It should get you up and running without VooDooHDA.

 

P.S.

Did you get Mojave installed on HFS+ or APFS? I have managed to get it to install and not convert to APFS.

 

Regards

2 hours ago, MaLd0n said:

use new patch usb for Mojave, by PMHeart

 

com.apple.driver.usb.AppleUSBXHCI

83FB0F0F 83090500 00

83FB0F90 90909090 90

Change 15 port limit

10.14.x

 

Thanks for the Update, will this fix USB 3 issues? I guess I'll find out and let you know :P

 

Regards,

Mohamed

Share this post


Link to post
Share on other sites
2 hours ago, MaLd0n said:

use new patch usb for Mojave, by PMHeart

 

com.apple.driver.usb.AppleUSBXHCI

83FB0F0F 83090500 00

83FB0F90 90909090 90

Change 15 port limit

10.14.x

Not all ports running at 5gbp/s in 10.14

All ports work fine in 10.13 though.

Rear ports still only work with USB 2.0 devices in 10.14

 

Attached config.plist

Port 1 front:

USB 3.0 Bus:

  Host Controller Driver:	AppleUSBXHCILPTHB
  PCI Device ID:	0x8cb1 
  PCI Revision ID:	0x0000 
  PCI Vendor ID:	0x8086 

HP USB CCID Smartcard Keyboard:

  Product ID:	0x0036
  Vendor ID:	0x03f0  (Hewlett Packard)
  Version:	1.24
  Serial Number:	11110780001571
  Speed:	Up to 12Mb/sec
  Manufacturer:	Hewlett-Packard Company
  Location ID:	0x14600000 / 3
  Current Available (mA):	500
  Current Required (mA):	100
  Extra Operating Current (mA):	0

Hub:

  Product ID:	0x0209
  Vendor ID:	0x045b  (Renesas Electronics Corp.)
  Version:	1.00
  Speed:	Up to 480Mb/sec
  Location ID:	0x14300000 / 2
  Current Available (mA):	500
  Current Required (mA):	0
  Extra Operating Current (mA):	0

USB OPTICAL MOUSE :

  Product ID:	0x0f97
  Vendor ID:	0x18f8
  Version:	1.00
  Speed:	Up to 1.5Mb/sec
  Location ID:	0x14330000 / 4
  Current Available (mA):	500
  Current Required (mA):	100
  Extra Operating Current (mA):	0

USB DISK:

  Product ID:	0x0917
  Vendor ID:	0x1f75  (Innostor Co., Ltd.)
  Version:	0.01
  Serial Number:	15092612001034
  Speed:	Up to 480Mb/sec
  Manufacturer:	        
  Location ID:	0x14200000 / 5
  Current Available (mA):	500
  Current Required (mA):	200
  Extra Operating Current (mA):	0
  Media:
  Capacity:	31.46 GB (31,457,280,000 bytes)
  Removable Media:	Yes
  BSD Name:	disk3
  Logical Unit:	0
  Partition Map Type:	MBR (Master Boot Record)
  USB Interface:	0
  Volumes:
PM_2018_04_:
  Capacity:	31.46 GB (31,456,231,424 bytes)
  Available:	30.78 GB (30,781,014,016 bytes)
  Writable:	Yes
  File System:	MS-DOS FAT32
  BSD Name:	disk3s1
  Mount Point:	/Volumes/PM_2018_04_
  Content:	Windows_FAT_32
  Volume UUID:	35BAC801-FA16-3DE0-904D-57FF536434C3

 

port 2 front:

USB 3.0 Bus:

  Host Controller Driver:	AppleUSBXHCILPTHB
  PCI Device ID:	0x8cb1 
  PCI Revision ID:	0x0000 
  PCI Vendor ID:	0x8086 

USB DISK:

  Product ID:	0x0917
  Vendor ID:	0x1f75  (Innostor Co., Ltd.)
  Version:	0.01
  Serial Number:	15092612001034
  Speed:	Up to 5Gb/sec
  Manufacturer:	        
  Location ID:	0x14f00000 / 8
  Current Available (mA):	900
  Current Required (mA):	304
  Extra Operating Current (mA):	0
  Media:
  Capacity:	31.46 GB (31,457,280,000 bytes)
  Removable Media:	Yes
  BSD Name:	disk3
  Logical Unit:	0
  Partition Map Type:	MBR (Master Boot Record)
  USB Interface:	0
  Volumes:
PM_2018_04_:
  Capacity:	31.46 GB (31,456,231,424 bytes)
  Available:	30.78 GB (30,780,211,200 bytes)
  Writable:	Yes
  File System:	MS-DOS FAT32
  BSD Name:	disk3s1
  Mount Point:	/Volumes/PM_2018_04_
  Content:	Windows_FAT_32
  Volume UUID:	35BAC801-FA16-3DE0-904D-57FF536434C3

HP USB CCID Smartcard Keyboard:

  Product ID:	0x0036
  Vendor ID:	0x03f0  (Hewlett Packard)
  Version:	1.24
  Serial Number:	11110780001571
  Speed:	Up to 12Mb/sec
  Manufacturer:	Hewlett-Packard Company
  Location ID:	0x14600000 / 3
  Current Available (mA):	500
  Current Required (mA):	100
  Extra Operating Current (mA):	0

Hub:

  Product ID:	0x0209
  Vendor ID:	0x045b  (Renesas Electronics Corp.)
  Version:	1.00
  Speed:	Up to 480Mb/sec
  Location ID:	0x14300000 / 2
  Current Available (mA):	500
  Current Required (mA):	0
  Extra Operating Current (mA):	0

USB OPTICAL MOUSE :

  Product ID:	0x0f97
  Vendor ID:	0x18f8
  Version:	1.00
  Speed:	Up to 1.5Mb/sec
  Location ID:	0x14330000 / 4
  Current Available (mA):	500
  Current Required (mA):	100
  Extra Operating Current (mA):	0

 

config.plist

Edited by moman2000

Share this post


Link to post
Share on other sites
On 6/14/2018 at 2:49 PM, moman2000 said:

Did you get Mojave installed on HFS+ or APFS? I have managed to get it to install and not convert to APFS.

 

You want to install Mojave on HFS+ partition?

The default Mojave installer will always convert to APFS with both hdd and ssd.

The only way to install Mojave on HFS+ directly is Mojave MBR HFS patch method (will never convert HFS+ to APFS).

Share this post


Link to post
Share on other sites
23 minutes ago, crazybirdy said:

 

You want to install Mojave on HFS+ partition?

The default Mojave installer will always convert to APFS with both hdd and ssd.

The only way to install Mojave on HFS+ directly is Mojave MBR HFS patch method (will never convert HFS+ to APFS).

Hi,

 

I have already heard of and used that patch to make it possible to install to HFS+. Thanks for the info.

Share this post


Link to post
Share on other sites

and how do I do it if I want to install with HFS+ and on a GPT partition on an SSD? or is that not possible?

Share this post


Link to post
Share on other sites

Successful update to beta 2, ironically my Pentium g3258 with RX 480 went smoother than the i7 4790k R9 270x.    I had a hiccup on the I7 “macOS could not be installed on this computer” but I rebooted in -v -x and overcame it. The Pentium plowed right through the update no issues. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Jessi-mj
      No success so far.
       
      There is no way I can get Mojave (or High Sierra) to install on this rig.
       
      I'd be really grateful for any help.
       
      My config is 
      Asus Maximus XI Hero (no WiFi); 
      I9-9900k; 
      Sapphire triX Radeon R9 290; 
      Corsair Pro RGB 2x16GB CMW32GX4M2C3200C16
       
      I am using my R9 290 I had at home because I don't need powerful graphics really.
       
      So what I've done
      1) Created USB installation drive using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] -  UEFi option
       
      2) Bios settings
      - Updated BIOS to lastest version
       
      - Load Optimised defaults
       
      - applied the following
      VT-d, disabled
      CFG-Lock, disabled
      Secure Boot Mode, disablef
      OS Type set to Other OS
      XHCI Handoff Enabled
      AI Overclocked set to XMP 3200
      Extreme twerking enabled
      Graphics Primary display set to PCIe
      Legacy USB support enabled
      Power on by PCI disabled
      Fast boot disabled
      Boot logo display disabled
      Boot option 1 set to UEFI usb installer
      Saved and rebooted.
       
      I either get no screen response (stuck in qcode 99 on MB) or stuck on PCI configuration begins.
       
      So what am I doing wrong?
       
      Five hours of trial and error and I gave up on installing from USB.
       
      I am now  installing Mojave from my MacBook Pro to SSD and will use [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] before moving the drive over to my PC
       
      The settings I am going to use in [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]
       
      Quick Start > UEFI Boot Mode
      Drivers > Audio > AppleALC
      Drivers > Misc > FakeSMC Plugins
      Drivers > Misc > FakeSMC HWMonitor Application
      Drivers > Misc > Core Graphics Fixup AKA WhateverGreen
      Drivers > Network > Intel > IntelMausiEthernet (I used the latest version)
      Drivers > USB > Remove XHCI USB Port Limit <--- Adds PMHeart’s patch to remove XHCI USB Port Limit
      Drivers > USB > USBInjectAll
      Bootloaders -> Clover v2.4k r4xxx UEFI
      Customize -> System Definitions > iMac > iMac18,3
       
      If you have any suggestions please help.
       
      Perhaps someone can share their EFI folder for a similar rig?
       
    • By Kielligzind
      Hello, i am trying to boot the installer of MacOS Mojave 10.14.5 on my HP Z220 CMT Workstation, but it gets stuck at this error. i attached pictures of this error and i posted my EFI folder. 
      i hope someone can help me. Thanks in advance.
       
      https://drive.google.com/file/d/1qH_ok-jzIwiLXd5LEEvVloRFZDgPAY2d/view?usp=sharing
       

    • By ThatsMatt
      Salve, sono nuovo nel forum e mi serviva una mano nell'installazione dell' ultima versione di MacOs sul mio notebook HP Pavilion 15-ak112nl.
      Specifiche Tecniche: 
      CPU: Intel Core i7-6700HQ (2.60 / 3.50 GHz, 4 core, 6 MB CACHE L3). 
      Scheda Grafica: Intel HD Graphics 530 + NVIDIA GeForce GTX 950M 4 GB DDR3.
      Hard Disk: 1 TB SATA 5400 rpm.
      Ram: 8 GB DDR3L-1600.
      Audio: altoparlanti stereo Bang & Olufsen PLAY. 
      Rete: LAN 10/100, WLAN 802.11b/g/n, bluetooth 4.0 (Miracast).
      Grazie in Anticipo a chi mi risponderà
    • By glasgood
      GLASGOOD'S
       
      MOJAVE HACKINTOSH GUIDE 
       

       
       
       
      **FOR**  GIGABYTE Z390 AORUS PRO
       
       
       
       
      CREDITS & THANKS
       
      @MaLd0n
      His help with EFI configuration and DSDT
       
      CLOVER  TEAM
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, rehabman, Download-Fritz, Zenit432, cecekpawon Et al
       
      APPLEALC
      Acidanthera, vit9696
       
      VOODOOHDA
      autumnrain, slice2009, zenith432
       
      ESP PRO MOUNTER
      @Micky1979 
       
      HACKINTOOL
      @headkaze
       
      CLOVER CONFIGURATOR
      Mackie100
       
      THEME ENGINE
      Alex Zielenski
       
      INSANELYMAC
      OLARILA
       
      Hackintool Tutorial
      daliansky
       
      Hackintosh Vanilla Desktop Guide
      /r/Hackintosh - corpnewt
       
       
      MONITORCONTROL
      JoniVR & theOneyouseek
       
       
       
      ------------------------------------------------------------------------------------------------------------------------------------------------------------
       
      UPDATES
       
       
      ------------------------------------------------------------------------------------------------------------------------------------------------------------
       
       
      PART LIST
       
      • Intel I7 8700 
      • Gigabyte Z390 AORUS PRO
      • Gigabyte AORUS RADEON RX 580 8GB ( connected to monitor with DisplayPort )
       
      • Corsair Vengeance LPX 16GB ( 2 x 8GB ) 2666MHz – CMK16GX4M2A2666C16  In this build, both memory modules are installed in memory slots DDR4_A1  and DDR4_B1 
       
      • Corsair RM650x 80 Plus Gold Power Supply Unit
      • Corsair H100i V2 AIO Hydro/Water RGB LED CPU Cooler
      • Samsung EVO 500GB SSD (2.5) macOS Mojave
      • Samsung EVO 250 GB SSD (2.5) Windows 10 Pro
      • NZXT H500 Mid Tower ATX Case
       
      • RECOMMENDED WIFI CARD → ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS  
      OR
      • WIFI and Bluetooth with BCM94331CD with PCI-e adapter (but will require AirportBrcmFixup.kext for AirDrop.. )
       
      ** Avoid Samsung EVO 970 PLUS as Hackintosh has problem with that device **
       
       
      WORKING
       
      • Sound 
      • HDMI Port on AMD RX580 / 590 ( Ensure you disable BIOS CSM if using HDMI on RX580 / RX590 )
      • HDMI Port on Aorus Z390 Motherboard ( Ensure you have correct BIOS settings as per this guide for Intel only)
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Handoff
      • Continuity
       

       

       
       
       

       
       
       
       
       
      PREAMBLE - BEFORE YOU START 
       
      Here detailed, is all the  steps towards building a successful and stable Aorus Pro Z390 Hackintosh, if you are a first time Hackintosher, this guide will have you quickly up and running with the Aorus Pro Z390 Hackintosh. To rule out any problems from the go,
      only have the disc that you plan to install macOS Mojave connected to the Aorus Pro, disconnect any other Windows / Linux or data drives, external drives from your Aorus Pro. Windows / Linux and data drives can be connected after successful installation of macOS Mojave
      If you have more than 16 GB of memory, then install macOS Mojave with just 16GB, you can later add any additional memory. Install memory modules in slots DDR4_A1  and DDR4_B1. This build has the Wi-Fi combo PCI-e card installed in slot PCIEX1_3
      with its 9 pin USB cable attached to motherboard header F_USB2. 
       
      If using the Corsair H100i v2 AIO cooler with USB cable connected to motherboard header F_USB1, you will need to enable hot-patch ( explained in guide ) in config.plist for working sleep, wake from sleep will only work by pressing Power Button.
      However, If not using the Corsair H100i v2  USB cable, then you have wake from sleep using Keyboard / Mouse or Power Button.
      The Corsair USB cable is only required if using Corsair Link software in Windows for custom Fan or LED settings.
       
      Install macOS Mojave on its own physical drive, so do not try and install macOS Mojave onto a free partition on a disc that contains Windows.
      Remove any Thunderbolt cards, Thunderbolt card can be reinserted after installation.  Double check your BIOS settings are the same as this guide. 
       
      Following are unsupported / problematic
       
      • Intel Optane ( if you have this, remove it before installation of macOS Mojave )
       
      • Samsung EVO Plus drives ( firmware problem with macOS )
       
      • XFX Radeon RX 580
       
      • NVIDIA GTX / RTX not supported in macOS Mojave
       
      • Fenvi T919 Wireless Card, it seems Bluetooth is not working out of box for some users ( Maybe the USB port attached to Fenvi bluetooth is wrongly configured, or the SSDT-UIAC.aml port connector was not configured as Internal, or maybe some other reason )
         Save yourself a headache --->  RECOMMENDED WIFI CARD WORKING OUT OF BOX (OOB)  is ---> ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS 
       
       
       
      Q - WILL THIS GUIDE WORK WITH MY NON AORUS Z390 PRO MOTHERBOARD ?
      A - Possibly may work with other Z390 chipset motherboards. See very bottom of page for PRE & POST - INSTALL AORUS X 390 EFI's ( will require USB SSDT fix  )
       
      Q - I notice you have the Aorus Pro Z390 version, will this guide work with Aorus Pro Z390 WiFi version ?
      A - Yes, but onboard Intel / Intel CNVi WIFII /Bluetooth will not work with macOS and you will have to disable HS14 for Bluetooth to function properly on BCM943602CS or BCM94331CD WiFi/Bluetooth Combo cards ( more info at bottom of guide) .
       
       
       
       
       
       
      PART 1 - DOWNLOAD 
       
       
      Download the following:
       
      • CLOVER
       
      • PRE-INSTALL Aorus Pro Z390 EFI - RX580.zip
       
      •  POST-INSTALL Aorus Pro Z390 EFI - RX580.zip
       
       
      //OPENCORE EXPERIMENTAL EFI FOR RX580==> EFI.zip
       
       
       
       
       
       
      // INTEL UHD 630 EFI  Aorus Pro Z390 EFI's below. For those who do not have a Graphics Card Installed in PCIe Slot, requires Initial Display Output BIOS setting to be changed to IGFX  spoiler below!
       
      •  PRE-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip
       
      •  POST-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip
       
       
       
       
       
       
      • ESP MOUNTER PRO v1.9
       
      • macOS MOJAVE 
       
      • CLOVER CONFIGURATOR
       
      • EmuVariableUefi-64.efi  ( Used only to initialise iMessages. It then must be removed from Clover drivers64UEFI folder as will cause intermittent memory allocation errors on boot, explained in guide)
       
       
      OPTIONAL DOWNLOADS
       
      • Native Display Brightness with MonitorControl
       
      • VoodooHDA.kext.zip 

      • ThemeEngine 
       
      • Assets.car 
       
       
      // Not really needed but IF no sound on Wake from Sleep then use SSDT-ALC1220 and CodecCommander
      • SSDT-ALC1220.aml  ( Resolves Audio Sound on Wake, place in Clover / ACPI / Patched )
       
      • CodecCommander.kext.zip ( Resolves Audio Sound on Wake, place in Clover / Kexts / Other )
       
       
       
       
      PART 2 - BIOS SETTINGS (version F9 )
       
       
      Here is a list of the BIOS settings that I have used ( Screenshots in spoiler below )
       
      • Enter BIOS → Press F12 → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • BIOS → Windows 8/10 Features → Other OS
      • BIOS → CSM Support → Enabled
       
      • Peripherals → Initial Display Output → PCIe 1 Slot
      • Peripherals → Trusted Computing → Security Device Support →  Disable
      • Peripherals → Intel(R)Bios Guard → Intel BIOS Guard Support →  Disable
      • Peripherals → USB Configuration → Legacy USB Support →  Enabled
      • Peripherals → USB Configuration → XHCI Hand-off →  Enabled
      • Peripherals → Network Stack Configuration → Network Stack →  Disabled
      • Peripherals → SATA And RST Configuration → SATA Mode Selection →  AHCI
       
      • Chipset → Vt-d → Disabled
      • Chipset → Internal Graphics → Enabled
      • Chipset → DVMT Pre-Allocated → 256M
      • Chipset → DVMT Total Gfx Mem → MAX 
      • Chipset → Audio Controller → Enabled
      • Chipset → Above 4G Decoding → Disabled 
       
      • Power → Platform Power Management → Disabled ( Change to enabled after macOS is installed )
      • Power → ErP → Disabled  ( Can be enabled if you have RGB lighting that you want to power off when shutting down Hackintosh. Thanks @AudioGod for flagging this up)
      • Power → RC6 (Render Standby) → Disabled
       
       
      • MIT → Advanced Memory Settings  → Extreme Memory Profile (X.M.P) → Disabled
      // IF USING  CORSAIR H100i V2 AIO CPU WATER COOLER 
      • MIT → Smart Fan 5 Settings → CPU Fan Control mode → PWM 
       
      • Save & Exit → Save & Exit Setup
       
      SCREEN DUMP SPOILERS
       
       
       
       
       
      PART 3 – CREATE A MOJAVE USB FLASH INSTALLER
       
      Prepare USB Installer for Mojave ( Video below )
       
      • Insert USB drive
      • Launch /Applications/Utilities/Disk Utility
      • Disk Utility → View → Show All Devices
      • On Left-hand panel → External →(Identify your USB device in left hand panel)
      • Click and highlight your USB device in the left-hand panel.
      • Click erase button.
      • Name: USB
      • Format: Mac OS Extended (Journaled )
      • Scheme: GUID Partition Map
      • Click Erase button.
       
      • Place the downloaded MacOS Mojave app into Applications folder.
      • Open Terminal copy and paste:
       
      sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --nointeraction && say Mojave Drive Created  • Enter
       
       
       
       
       
       
       
       
       
       
       
      PART 4 – INSTALL CLOVER ON THE MOJAVE USB INSTALLER 
       
      Make Mojave USB flash drive installer bootable.( Video below )
       
      • Launch Clover application, double click.
      • Click Continue → Continue → Continue 
      • Click Change Install Location button.
      • Click Install macOSMojave USB installer → Continue
      • Click Customise button
      • Choose:
      Clover for UEFI booting only Install Clover in the ESP Themes UEFI Drivers • Click Install button
      • Installation Complete!
       
      Video:
       
       
       
       
       
       
      PART 5 – CUSTOMIZE MOJAVE USB INSTALLER FOR AORUS Z390 PRO
       
      Replace Clover EFI folder with PRE-INSTALL Aorus Pro Z390 EFI - RX580.zip  OR  if NO graphics card installed in PCIe slot, then use PRE-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip( Video below ) 
       
      • Install ESP Mounter Pro v1.9
      • Using ESP Mounter Pro, Mount ESP on disk2s1 ( Your disk name may be different )
       

       

       
       
       
      • Open mounted EFI partition found on desktop
      • Copy all the contents from Aorus 390 Pro EFI folder
      • Replace USB EFI folder with all the contents inside the Aorus 390 Pro EFI folder.
       
       

       
       
       
       
       
       
       
      PART 6 – INSTALL MAC OS MOJAVE ON INTERNAL DRIVE
       
      INSTALL NOTE
       
      ENSURE BIOS: Above 4G Decoding is set to Disabled 
      if Above 4G decoding is set to enabled then macOS Mojave install will freeze at 2 mins remaining and will not shut down properly!!!!
       
      Please be patient during install, so when install gets to 2 or 3 mins remaining then it may take extra time. Be ready to boot from UEFI USB installer by pressing F12 when install initiates restarts. 

      • INSERT USB INSTALLER INTO THE USB 2.0 PORT  
       
       
       Here is a walkthrough of the full process using the macOS Mojave USB Installer on the Aorus Z390 Pro. 
       
       
       
       
      • Power on PC and press F12• Choose bootable USB drive from boot menu.
       
       
       
      • Install macOS Mojave to internal solid state or hard drive.
       
       
       
      When system returns to the Clover boot menu choose:
       
      • Boot macOS Install from Macintosh
       
       
       
      At next restart, press F12 and boot from external UEFI USB device and choose:
       
      • Boot macOS Install from Macintosh
       
       
       
      Proceed with macOS Mojave install
       
       
      macOS Mojave is now installed, but it can only boot at this moment thanks to FakeSMC and Clover on the Mojave USB flash drive installer.
       

       
       
       
       
       
       
      PART 7 – MAKE AORUS Z390 PRO INTERNAL DRIVE BOOTABLE
       
      Make internal drive bootable ( Video below )
       
      So far, the Aorus Pro can only boot the internal system drive with the aid of the Mojave USB Installer.
      To boot from the internal system drive without the installer: 
       
      Download and install Clover with RC Scripts on target volume.  
      If your Aorus Pro Z390 has AMD RX 580 then copy the EFI folder from inside POST-INSTALL Aorus Pro Z390 EFI - RX580.zip  folder and paste it inside the the System Drive EFI partition.          OR
      If your Aorus Pro Z390 has no graphics card installed in PCIe slot, then copy the EFI folder from inside POST-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip  folder and paste it inside the the System Drive EFI partition.   
       

       
       
       
      • Remove USB Mojave installer and shut down and restart.
       
      Aorus Hackintosh should now be able to boot to macOS Mojave, Done, well almost ! 
       
       
       
       
       
      PART 8 – ENABLE IMESSAGES & FACETIME 
       
       
      // UPDATE 21st MAY 2019
       
      Possibly Clover Configurator now automatically populates correct values for working iMessages when you select an SMBIOS.  
       

       
      After selecting SMBIOS, example iMac19,1 for Aorus Pro with RX580 ( image above ) then go to Apple and ensure you have the "serial number is not valid " message. Done!
       
      If you still have problems connecting to iMessage, test and ensure that AirDrop is working, then follow instructions inside spoiler. 

       
       
      • Mount internal drive EFI/ESP partition
      • Go to folder CLOVER → drivers64UEFI 
      • Place both EMUVariableUefi-64.efi inside → drivers64UEFI
       
       
      Using Clover Configurator, add the following argument to config.plist using Clover Configurator.
       
      • Slide = 0
       

       
       
      Shutdown and then press power on button on PC.
       
      • You should now be able to Log into iCloud, iMessages and FaceTime
       
       
       
      • NOW delete EMUVariableUefi-64.efi from CLOVER → drivers64UEFI Folder 
      • Shutdown and restart Aorus Pro hackintosh. iMessages etc is now operational without EMUVariableUefi-64.efi ( EMUVariableUefi-64.efi only needed to initialise iMessages )
       
       
      // UPDATE 22nd May 2019 
       
      • It seems that there are no "Couldn't allocate runtime area"  errors when continuing to use EMUVariableUefi-64.efi since updating to macOS Mojave 10.14.5 and using Clover version r4920. 
      • It is important to delete EMUVariableUefi-64.efi, this will avoid very intermittent boot errors such as: “Couldn’t allocate runtime area”  post errors.
       
       
       
       
      PART 9 – ENABLE TRIM for Solid State Flash Drives
       
      Open Terminal and enter the following command:
      sudo trimforce enable  
       
       
       
       
      DEFAULT SSDT –  USB PORTS FIX CONFIGURATION WITH FRONT USB-C - SSDT USBPorts.kext ALREADY INSIDE AORUS Z390 EFI FOLDER  – Provided by @AudioGod  
       
       

       

       
      If you have USBC on Computer Chassis / Case, then SS01 and SS02 is mapped to that USB C port 
       

       
       
       
       
       
       
      ------------    GUIDE FINISHED YOU SHOULD NOW HAVE WORKING AORUS Z390 PRO HACKINTOSH  WITH SSDT USB FIX   ------------
       
       
       
      OPTIONAL: Set Wi-Fi Country Code
       
       
       
       
       
       
      OPTIONAL: System Information - PCI
       
       
       
       
       
       
       
      External USB Storage:  Fix "disk did not eject properly" message upon wake from sleep
       
       
       
       
       
       
       
      OPTIONAL:  Native Display Brightness - with MonitorControl

       
       
       
       
       
       
      OPTIONAL:  Dual Boot macOS Mojave & Windows 10 
       
       
       
       
       
       
       
       
      OPTIONAL:  Replace the default "About This Mac" Apple Logo with RED AORUS APPLE
       
       

       
       
       
       
      OPTIONAL - ALTERNATIVE SSDT 1 –  SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder 
       
       
       
       
       

      OPTIONAL - ALTERNATIVE SSDT 2 -  SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder 
       
       
       
       
       

      OPTIONAL - ALTERNATIVE SSDT 3 – Create your own SSDT
       
       
       
       
       
      FRAMEBUFFER PATCHING  – For working Intel UHD 630 Graphics, working HDMI Port, working HDMI Audio on Aorus Z390 Pro
       


       
       
       
       
       
       
      FINAL CUT PRO  – Configuration for AMD RX5xx 
       
       
       
       
      AORUS PRO Z390 WIFI version with Intel CNVi  – Disable Bluetooth on HS14
       
      Resolve bluetooth issue  reported by @eSaF 
       
       
       
       
       
       
      CLOVER  – Updating / Upgrade Clover boot loader 
       
       
       
       
       
       
      SLEEP  – Sleep and Automatic Sleep

       
       
       
       
       
       
       
       
      SLEEP  – Resolving Instant Wake ( Corsair H100i v2 AIO )
       
       
       
       
       
       
       
       
      WIFI  – Clover Hotpatch PXSX to ARPT
       
       
       
       
       
       
       
       
       
       
      RECOMMENDED READING  – Excellent Hackintosh Vanilla guide created by CorpNewt with in depth tutorial on Clover.  
       
      https://hackintosh.gitbook.io/-r-hackintosh-vanilla-desktop-guide/config.plist-per-hardware/coffee-lake
       
       
       
       
       
       
       
       
       
      AORUS Z390 MOTHERBOARD X  – EFI WITH NO USB SSDT, WITH PORTS LIMIT PATCH, WITH SSDT-GPRW SLEEP / WAKE FIX
       
      Q - I notice you have the Aorus Pro Z390 version, will this guide work with other Gigabyte Aorus Z390  motherboards ?
      A - Possibly, but it is not guaranteed that these EFI folders below may work. 
       
       
      PRE-INSTALL Aorus X Z390 EFI - RX580.zip
      POST-INSTALL Aorus X Z390 EFI - RX580.zip
       
      PRE-INSTALL Aorus X Z390 EFI - Intel UHD630.zip
      POST-INSTALL Aorus X Z390 EFI - Intel UHD630.zip
       
       
       
       
       
       
       
       
       
       
       
       

       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      SSDT-UIAC.aml.zip
      SSDT-UIAC.dsl.zip
       
      CodecCommander.kext.zip
      SSDT-ALC1220.aml.zip
       
      POST-INSTALL Aorus Pro Z390 EFI - RX580 2.zip
    • By crazybirdy
      Patched OSInstaller.framework to allow macOS 10.14 installation on MBR HFS+ partition.
       
      To use those patched files you must follow HowTo to create an USB installer. You can't just run the app downloaded from Mac App Store.
      The patch is made base on 落下爱@pcbeta 10.10.x MBR patch method, and more patch for 10.14 HFS Firmware check by crazybirdy.
       
      What is this patched OSInstaller doing?
      1. Patch the MBR check, allow macOS 10.14 installation on MBR partition.
      2. Patch the Firmware check, bypass the error of "An error occurred while verifying firmware".
      3. Patch to stop auto-convert to APFS , "ConvertToAPFS=false" is no longer worked with 10.14.
      4. This patched MBR OSInstaller will never convert to APFS, and will always install as HFS+ partition.
      5. This patched MBR OSInstaller method works with both MBR HFS+ and GPT HFS+ partition (GPT+recovery).
      No longer need to set new SMbiosversion, FirmwareFeatures, and FirmwareFeaturesMask with this MBR-patch.
       
      What's the difference between createinstallmedia method, MBR-Manual-Method, and MBR-Automatic-Method?
      As the following....
      1. createinstallmedia method,
          needs stage 1, stage 2 installation process, which is worked with GUID partition only, always convert to APFS format.
      2. MBR-Manual-Method (same as 10.12),
          install via stage 2 manually, which is worked with both MBR and GUID, HFS+ and APFS, will never convert the partition format.
          We can manually format as MBR or GPT, HFS+ or APFS on installation screen like as 10.12.
          We can manually select MBR HFS+ partition to install 10.13 and 10.14 on installation screen now.
          Needn't to update the MBR-Manual-Method files, it will still work on 10.13, and 10.14 future versions, I think so.
          It can be installed as Fresh installation on formated blank partition only, but can't be installed as update from previous version.
      3. MBR-Automatic-Method (new for 10.13+),
          install via stage 2 automatically, which is worked with both MBR and GUID, HFS+ and APFS, will never convert the partition format.
          It can be installed as Fresh installation on formated blank partition, and can be installed as update from previous version.

      How to make 10.14 installer for MBR (MBR-Manual-Method)?
      Just use EasyMBR-InstallerMaker to make installer, it works with both MBR and GPT.
      Read HowTo inside the dmg first, same as 10.12.
      Read HowTo Q/A Q5. How to patch to work with CPU SSE4.1 only for Mojave?
      Read HowTo Q/A Q6. How to download the full installer app via swscan.apple.com, instead of App Store?
      Read HowTo Q/A Q7. How to update 10.14.x combo-update to MBR and GPT with installScript directly?
       
      How to make 10.14 installer for MBR (MBR-Automatic-Method)?
      Just use 14MBRinstallerMaker to make installer, it works with both MBR and GPT.
      Read HowTo inside the dmg first, same as 10.13.
      Read HowTo Q/A Q5. How to patch to work with CPU SSE4.1 only for Mojave?
      Read HowTo Q/A Q6. How to download the full installer app via swscan.apple.com, instead of App Store?
      Read HowTo Q/A Q7. How to update 10.14.x combo-update to MBR and GPT with installScript directly?
       
      And, need a SMBIOS supported with /System/Library/CoreServices/PlatformSupport.plist.
       


       
      Q6. How to download the full installer app via swscan.apple.com, instead of App Store?
      A6. Some people download installer app from App Store, and get only 18 MB size, not the complete installer app (5.68 GB). You should boot to 10.12, or 10.13 to download it again from App Store, or use script Q6-DownloadFullApp/installScript_1014fullapp to download the full installer app via swscan.apple.com.
       

       
×