Jump to content
Gymnae

[Guide] Mojave / High Sierra on Gigabyte H370 HD3 (Rev. 1.0)

80 posts in this topic

Recommended Posts

2018030711412939_m.png.9a96f3243c3af986d53e0934230cdd50.png

Introduction

The H370 chipset powers 8th generation Intel Core-i CPUs. Even though the name H370 rings comparable to Z370, the H370 is based on newer silicon. This it also requires some new approaches compared to the Z370. An example would be on-die USB 3.1 and WiFi support.

 

Since this guide is not a "hold-your-hand-every-step" guide, I assume you know:

  1. Clover installation and configuration
  2. How to create an install medium for MacOS
  3. Access and configure the BIOS
  4. Have heard of ACPI patching (I'm a newb at this myself)

 

What works

  • Sleep (via DSDT edits and emulated NVRAM)
  • On-board Audio (via AppleALC and native AppleHDA)
  • Native power management (without any kext or patch)
  • All USB ports (and only those present are active)
  • iGPU for both acceleration and display
  • dGPU (I'm running an Nvidia GTX 1080)

 

Untested

  • NIC --> I'm using WiFi only

 

What doesn't work

  • Native NVRAM via AptioMemoryFix.efi
  • DMVT Pre-alloc higher than 64MB (but not necessary)

 

Community additions

User @Panzerschiffe added a helpful post, altering this guide for user with AMD cards and not needing on-board sound.

He also runs Mojave, which I don't run yet.

 

 

Changes to the guide:

22.5.18: Added SSDT hot-patching to enable sleep, replacing DSDT static patching as an alternative.

23.5.18: Add iMac18,1 as alternative SMBIOS config for those relying on the iGPU for output

25.6.18: Added update info

28.8.18: Small changes for clarity, changed info for afps loading & updated USB patch for 13.6

04.10.18: Update to Mojave will come once Mojave is more mature

02.12.18: Removed unnecessary patches, fakepciid and audio patch method & linked to AMD post & added whatevergreen.kext as replacement for previous GPU kexts

02.03.19: Removed unnecessary fakeid and ig_platform_id injections, ACPI patches - this is all handled by whatevergreen & lilu. In testing is a Framebuffer patch, see this post.

04.03.19: Added Germany keyboard layout and updated pre-patched DSDT.aml removed DSDT patching

 

 

1. Installation

This guide heavy inspired by the work of /u/corpnewt of /r/hackintosh and his (sorta) Vanilla guide

 

1.1 Create the install media for MacOS

Follow this, if you are using a Mac to start off with. If you are totally new to MacOS, then please check the basic guide Creation of an installer media in windows or linux

 

1.2 Install Clover on the install media

Using the Clover installer, ensure you are installing to the USB medium you are using for the installer.

Chose the following options, leaving the others on default: 

 

  • UEFI driver: AptioMemoryFix
  • UEFI driver: ApfsDriverLoader
  • UEFI booting only
  • Install to ESP

 

You have to get your hands on an apfs.efi. A google search can help, or extracting it from the Installer package. Make sure you procure a version matching the MacOS version you are about to install. Place the apfs.efi in drivers64UEFI.

 

1.2 Adjust the config.plist for the installer

You can use the config.plist attached as a guideline, but take a look at it before and at least adjust the SMBIOS - otherwise it won't boot.

Attention: The attached plist contains audio patches introduced by a post-install step. If you run into problems, you might remove those. It also contains a manual slide value, which should normally not be needed, but works fine for me. It is also tuned for usage with an Nvidia Pascal dGPU as main GPU.

 

The config you create now should serve you nicely for install and running the system.

 

Take care of adding the following basics:

  • SMBIOS: iMac18,3 - You can generate a serial number via Clover Configurator. The creation of a proper SMBIOS is covered in many guides to good extend
    • Note: If you aim at using the iGPU for output, a user reported that iMac18,1 works better - since iMac18,3 produces severe flicker. I'm now also testing 18,1
  • Look at the graphics section and adjust the injection for Intel to your situation

 

Fixes

Spoiler

<key>Fixes</key>
			<dict>
				<key>AddDTGP</key>
				<false/>
				<key>AddMCHC</key>
				<true/>
				<key>AddPNLF</key>
				<true/>
				<key>FixHPET</key>
				<true/>
				<key>FixIPIC</key>
				<true/>
				<key>FixRTC</key>
				<true/>
				<key>FixShutdown</key>
				<true/>
				<key>FixTMR</key>
				<true/>
			</dict>

 


Patches

Spoiler

 


<key>Patches</key>
			<array>
				<dict>
					<key>Comment</key>
					<string>change SAT0 to SATA</string>
					<key>Disabled</key>
					<false/>
					<key>Find</key>
					<data>
					U0FUMA==
					</data>
					<key>Replace</key>
					<data>
					U0FUQQ==
					</data>
				</dict>
				<dict>
					<key>Comment</key>
					<string>Rename HDAS to HDEF</string>
					<key>Disabled</key>
					<false/>
					<key>Find</key>
					<data>
					SERBUw==
					</data>
					<key>Replace</key>
					<data>
					SERFRg==
					</data>
				</dict>
			</array>

 

 

 


Devices

Spoiler

 


<key>Devices</key>
	<dict>
		<key>Audio</key>
		<dict>
			<key>Inject</key>
			<string>1</string>
			<key>ResetHDA</key>
			<true/>
		</dict>
		<key>USB</key>
		<dict>
			<key>AddClockID</key>
			<true/>
			<key>FixOwnership</key>
			<true/>
			<key>Inject</key>
			<true/>
		</dict>
	</dict>

 

 

 


Graphics

Important:

Change 0x59120003 to 0x59120000 if you don't use a dGPU as your main display Driver and instead use the iGPU for output.

Also note. SMBIOS iMac18,1 has been reported to work better in this configuration. But 18,3 works fine for me.

Spoiler

Change 0x59120003 to 0x59120000 if you don't use a dGPU as your main driver and instead use the iGPU for output. Also note that SMBIOS iMac18,1 has been reported to work better in this configuration.


<key>Graphics</key>
	<dict>
		<key>Inject</key>
		<dict>
			<key>ATI</key>
			<false/>
			<key>Intel</key>
			<true/>
			<key>NVidia</key>
			<false/>
		</dict>
		<key>NvidiaSingle</key>
		<false/>
	</dict>

 

 

 


Kernel and Kext patches

Spoiler

 


<key>KernelAndKextPatches</key>
	<dict>
		<key>AppleIntelCPUPM</key>
		<true/>
		<key>AppleRTC</key>
		<true/>
		<key>Debug</key>
		<false/>
		<key>KernelCpu</key>
		<false/>
		<key>KernelLapic</key>
		<false/>
		<key>KernelPm</key>
		<true/>
		<key>KernelXCPM</key>
		<false/>
		<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Comment</key>
				<string>External icons patch</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				RXh0ZXJuYWw=
				</data>
				<key>InfoPlistPatch</key>
				<false/>
				<key>MatchOS</key>
				<string>10.13.x</string>
				<key>Name</key>
				<string>com.apple.driver.AppleAHCIPort</string>
				<key>Replace</key>
				<data>
				SW50ZXJuYWw=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>change 15 port limit to 26 in XHCI kext (credit FredWst)</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				g32UDw+DlwQ=
				</data>
				<key>InfoPlistPatch</key>
				<false/>
				<key>MatchOS</key>
				<string>10.13.x</string>
				<key>Name</key>
				<string>com.apple.driver.usb.AppleUSBXHCI</string>
				<key>Replace</key>
				<data>
				g32UGg+DlwQ=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>Prevent AGDP from loading (credit: vit9696) </string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				ugUAAAA=
				</data>
				<key>InfoPlistPatch</key>
				<false/>
				<key>MatchOS</key>
				<string>10.13.x </string>
				<key>Name</key>
				<string>com.apple.driver.AppleGraphicsDevicePolicy </string>
				<key>Replace</key>
				<data>
				ugAAAAA=
				</data>
				<key>true</key>
				<false/>
			</dict>
            <dict>
            <key>Comment</key>
            <string>USB 10.13.6 by PMHeart</string>
            <key>Disabled</key>
            <false/>
            <key>Find</key>
            <data>
            g32IDw+DpwQAAA==
            </data>
            <key>InfoPlistPatch</key>
            <false/>
            <key>MatchOS</key>
            <string>10.13.x</string>
            <key>Name</key>
            <string>com.apple.driver.usb.AppleUSBXHCI</string>
            <key>Replace</key>
            <data>
            g32ID5CQkJCQkA==
            </data>
        </dict>
		</array>
	</dict>

 

 

 

 

1.3 kexts and friends

Add the supplied SSDT-UAIC.aml to "patched" - it limits the injected USB Ports to the actual number and ports valid for this board.

 

Required kexts on "Other":

 

We are leaving sound out at the moment, this is something for post-install.

 

1.4 Check BIOS and install

You should be ready for install. But before you reboot, please take a look at your BIOS and set it up accordingly (copied from the aforementioned guide and adapted):

  1. Load Optimized Defaults
  2. Disable VT-d setting
  3. If your system has Secure Boot Mode, disable it
  4. Enable CSM - This is sometimes needed to dual screens to work
  5. Set OS Type to Windows 8/10 or OtherOS - I have not seen a difference
  6. Turn off internal Serial and Parallel port
  7. Turn off Network stack for boot
  8. Turn off wake-on-lan (for now)
  9. Set XHCI Handoff to enabled
  10. Don't enable decode over 4G
  11. Depending on your GPU, set priority for boot
  12. Set internal GPU (iGPU) to enable - not auto or disabled
  13. Set DMVT pre-alloc min to 64MB and max to 128MB. For this selection to appear you might need to reboot after setting iGPU to enable
  14. Set USB legacy to enabled
  15. Activate XMP profile 1 f your Ram has it (mine doesn't and I added the timings manually)
  16. Set ERP to enable, disable platform power management (I need to do more research if this could be enabled)

 

I've attached my current BIOS config "hack2". You can place that on a fat32 drive (the EFI partition of your install USB drive might be an idea) and see if it loads. It's made for and with the F2 BIOS.

 

The install itself should be like other MacOS Hackintosh installs with it several reboots and ensuring to select the correct boot device in Clover.

 

2. Post-install

 

2.1 Install clover on target

This is a no-brainer, but install a fresh copy of Clover on your target medium.

 

During install select again AptioMemoryFix but also additionally

  • EmuVariableUefi-64.efi
  • Install RC scripts on target volume

because otherwise NVRAM doesn't seem to work

 

After the install, copy

  • config.plist
  • contents of "Other"
  • content of "patched"

to your new clover install.

 

2.2 Edit ACPI for slumber

Choose one option, not both. The hot-patch is experimental, but for the moment it is stable.

 

2.2.1 Edit DSDT

No more need for manual DSDT patching. If you still do it, you might run into unstable sleep. SSDT hot-patching + sane clover.config edits are enough

 

This is necessary only once on initial install and every time, you edit or upgrade the BIOS. The DSDT.aml attached to this post might work for your system or give you a file to compare to. Don't expect it to work for you, though.

EDIT: Since moving from F2 BIOS to F12 I did not repatch and sleep is still somewhat reliable. But to be 100% sure, you can still follow these steps.

I won't go into the details of DSDT extraction and patching. There are better guides (the linked guide is a rip-off of rehabman's guide from a different forum). Please follow such a guide to extract your ACPI data.

 

Locate and disassemble the DSDT with the newest iasl binary you can put your hands on, then open it with MacIASL in its newest version you can find (Hint: Here is a good source) You can check if the version is new enough if MacIASL doesn't throw error upon compiling a freshly extracted DSDT.aml or DSDT.dst

 

Add rehabmans repo (as per linked guide) and apply the following patches:

  • Rename _DSM to _XDSM
  • Fix _WAK Arg0 v2
  • USB3 _PRW 0x6D Skylake (instant wake)

Find the CNVW device and remove the _PWR function there.

 

Compile the DSDT and place it in "patched".

 

2.2.2 Use SSDT hot-patching

Instead of having to re-extract and re-patch the DSDT on every BIOS change or update, Hardware change one can also use ACPI hot-patching.

It's a combination of config.plist patches and an SSDT, which is hot-patched into the ACPI (if I understand the process correctly)

 

  1. You need to add this SSDT-GPRW.aml to your Clover folder in the designated position at Clover/ACPI/patched
  2. You need to add this patch to your config.plist. It goes into the DSDT patch section
    Spoiler

     

    
    	<dict>
    					<key>Comment</key>
    					<string>change Method(GPRW,2,N) to XPRW, pair with SSDT-GPRW.aml</string>
    					<key>Disabled</key>
    					<false/>
    					<key>Find</key>
    					<data>
    					R1BSVwI=
    					</data>
    					<key>Replace</key>
    					<data>
    					WFBSVwI=
    					</data>
    				</dict>

     

     

Note: This works for me, but the patch removes the _PRW method from all devices in the DSDT. This could have side-effects. So far, I have seen none. At the moment I'm also not applying any other patch, compared with the additional edits I made to the DSDT method before.

 

2.3 Install kexts to system

As mentioned in the install section, it's better to follow rehabman's instruction and install USBinjectAll.kext to /L/E:

sudo cp -R Release/USBInjectAll.kext /Library/Extensions 
sudo touch /System/Library/Extensions && sudo kextcache -u /

2.4 Enable onboard Audio - Install AppleALC kext

Make sure your EFI partition is mounted and that you have a vanilla AppleHDA kext available. See below for a guide how to get a vanilla AppleHDA if needed

Note: Our Audio codec is ALC887 and it's running with layout ID 1.

Download the newest AppleALC kext from here and install it together with lilu.kext from here into your usual /clover/kexts/others location. Done. No scripts or config.plist patches necessary.

Add layout ID 1 to config.plist, if it's not there yet:

<key>Audio</key>
		<dict>
			<key>Inject</key>
			<integer>1</integer>
			<key>ResetHDA</key>
			<true/>
		</dict>

If you previously  installed any  audio patches, please follow this guide to "vanilla-ize" your install.

 

2.5 Optional steps for Graphics

If you have a dGPU, now it's the time to install its drivers and adjust the config.plist for it. The detaisl are specific to your GPU and thus of scope of this guide. Yet, my supplied config.plist is ready to be used with Nvidia Pascal cards and using the Nvidia web driver.

Whatevergreen.kext helps with Intel iGPU and NVIDIA dGPU fixes.

 

At the moment I'm also testing out a special bootflag: 'shikigva=12' to enable faster rendering in Final Cut Pro X. Without whatevergreen.kext and a shikigva bootflag, rendering in final cut seem very slow.

 

2.5.1 Framebuffers

If you're facing problems with output from your internal GPU, you can try the framebuffer patches listed by @BackwardMac:

 

2.6 Install a proper keyboard layout

You might not be using a fancy Apple branded keyboard. If you use a PC keyboard, you might be annoyed by the differing layout and usage of keys. As a German, you might find yourself quitting applications, since alt gr + Q won't add an @, but quit your current application. To fix this, you can simply install a different keyboard layout. Copy it to /Library/Keyboard Layouts/ and chose the layout in System Preferences, Keyboard in the section "Other". Deleting the previously selecting layout makes sure that only this one is used. Nice little trick.

 

A keyboard layout for German keyboards is attached and works wonders

 

3. Updating

Updating inside 10.3.x/ 10.4.x point updates doesn't require much attention:

  1. Download the update from the AppStore as any Mac would do
  2. Allow the system to reboot
  3. Before booting MacOS with Clover, make sure to disable extra drivers for dGPUs which require non-native support.
    1. If using an Nvidia dGPU: Remove "nvda_drv=1"  from your boot arguments and disable Nvidia injection
    2. If using a non natively supported AMD card, do the same for AMD (I'm not using AMD, thus I cannot be specific)
  4. Boot into the newly created Install MacOS partition
  5. Repeat this process until the Install partition is gone
  6. Boot MacOS again, still following 3., and potentially install updated drivers
  7. Your Audio might require re-patching

 

4. ToDo

  • Move away from static DSDT patching to SSDT hotpatching --> requires my work
  • Native NVRAM --> requires developer work
  • Audio without AppleHDA patching --> requires developer work

 

5. Thanks to

@MaLd0nfor helping finding the right way with the DSDT

@RehabMan, for being a legend and helping me out patching

@toleda, for audio patches for the 300 series

/u/corpnewt, for his superb vanilla guide

@wmchris for his super XPS 9550 guide and introducing me to hot-patching

@Panzerschiffe for his addition to this guide

all the developers of clover and it's awesomeness

 

SSDT-UIAC.aml

 

 

 

win-germany.keylayout

 

Edited by Gymnae
New pre-patched DSDT for F12 and German keyboard layout

Share this post


Link to post
Share on other sites
Advertisement

Very nice and well explained guide, but really is there still need for the .sh command? I used that in earlier versions of OS X and it always caused me buzzing noise after about 3 min when nothing was playing. Now after discovering AppleALC and Lilu my Audio seems like heaven for me.

Share this post


Link to post
Share on other sites

Thank you :)

I couldn't get it to work work with applealc and lilu. It's something about added codecs and layouts to appleHDA in combination with the spoofed ID by fakdpciid, i assume. 

Audio works fine for me, even after sleep. 

Sleep has also been super stable with ssdt, which is nice. 

Share this post


Link to post
Share on other sites

Thank you very much.

I just bought this board with an i3 8100.  Excellent work explaining how to install.  Just for the others who have this CPU and want to run High Sierra with the integrated graphics, the catch is to change into 0x59120000 (see hidden text under Graphics). Since I have an old Nvidia I was stuck at the graphics but once I changed the ID it all worked out of the box, I just had to patch the audio, each time after update, since AppleHDA is replaced. I did use your DSDT! I am running 18,1 smbios. I do not see any flickering... Odd. I did put in CLOVER > Kexts > Other > XHCI-300-series-injector.kext.

 

See the pics I attached how my clover looks like.

 

Thanks again 

Screen Shot 2018-06-12 at 5.25.25 PM.png

Screen Shot 2018-06-12 at 5.26.01 PM.png

Share this post


Link to post
Share on other sites

Hi @Gymnae, 

 

really help for me with an H370M DS3H,

 

But just a question, are ou able tu use one screen on your dGPU and an other on the IGPU.

I try to do that on my builds with UHD 630 (i8400) and a EVGA GT 740 but without success.

 

thank you.

Share this post


Link to post
Share on other sites
1 hour ago, BackwardMac said:

Hi @Gymnae, 

 

really help for me with an H370M DS3H,

 

But just a question, are ou able tu use one screen on your dGPU and an other on the IGPU.

I try to do that on my builds with UHD 630 (i8400) and a EVGA GT 740 but without success.

 

thank you.

 

Hey BackwardMac, I have not tried that yet - I only have one screen available to me.

Share this post


Link to post
Share on other sites

Ok thank for the answer,

 

I suppose you connect your screen to the DGPU, did you try to connect to the IGPU instead.

I always have black screen on IGPU ...

Share this post


Link to post
Share on other sites
On 6/14/2018 at 5:05 PM, BackwardMac said:

Ok thank for the answer,

 

I suppose you connect your screen to the DGPU, did you try to connect to the IGPU instead.

I always have black screen on IGPU ...

 

Have you changed  0x59120003 to 0x59120000?

This way the systems knows that an output is connected to the iGPU. @veledescribed it less hidden than I put it down.

Share this post


Link to post
Share on other sites

Hi, thank you for this guide.

i have the same MB with Nvidia 1050 gpu, unfortunately i am unable to get it working. can you be a little more specific, which steps are needed to get the Nvidia GPUs to work, can you post a ZIP of your EFI Folder?

 

thank you

Share this post


Link to post
Share on other sites

 

On 6/25/2018 at 9:31 AM, Gymnae said:

 

Have you changed  0x59120003 to 0x59120000?

This way the systems knows that an output is connected to the iGPU. @veledescribed it less hidden than I put it down.

 

I success by playing with the frame buffer I had to change some port with patches, but thank you for your help.

Share this post


Link to post
Share on other sites

Hello,

 

I did as described in the thread above but I still have some problems:

  • Only the one USB 3.1 Port is working
  • No sound card detected (no problem for me I have an extra USB card)
  • Shutdown "seems to work" but when I want to start the PC reboots in a loop until I cut the power for some time. 

Does someone have a solution for this problems? Could someone share the EFI folder?

 

Ps. I removed nvidia driver because I have a rx 580.

 

Thanks in advance

Share this post


Link to post
Share on other sites

I am stuck at the install step.

 

I have h370 hd3, bios is f2 (I have tried manually changing the bios settings and using hack2)

I Beleive that I have followed every single step correctly, but I still get a prohibited sign and "waiting for root device" when I load in verbose. 

 

Please, if anyone knows what I am doing wrong, help me! 

 

Thanks in advance. 

Share this post


Link to post
Share on other sites

Hi, thanks for the info on the gigabyte HD3.  I too have the same board and got high sierra working.

 

My final setup looked like this:

./EFI/CLOVER/kexts/Other:
FakeSMC.kext
IntelGraphicsFixup.kext
IntelMausiEthernet.kext
Lilu.kext
NvidiaGraphicsFixup.kext
USBInjectAll.kext
VoodooHDA.kext
XHCI-300-series-injector.kext

./EFI/CLOVER/ACPI/patched:
SSDT-UIAC.aml

Clover config.plist attached.

 

I used the SSDT-UIAC.aml file from the first post. When this boots I get a couple of pages of very fast scrolling errors at the start of the boot, so i think it's probably not perfect.  I tried the SSDT-GPRW.aml hotpatch (on its own) but this did not work - everything was ok but I was left without SS USB (usb3.0).  I could see only HS USB devices in IOReg.  Going back to just the SSDT-UIAC.aml fixed this.

 

I tried the HDA route but without success.  Instead opted for VoodooHDA which worked first time with no problems, including vol controls and mute.

 

Overall a successful OSX86 install but not a painless one.

 

P.S. My system specs: NVidia GTX 1050 Ti / 8GB / 500gb samsung 570evo nvme / i7 8700 / gigabyte H370 HD3 v1.0 / Single hdmi monitor.

config.plist

Share this post


Link to post
Share on other sites
On ‎8‎/‎13‎/‎2018 at 10:37 PM, dave_t_uk said:

Hi, thanks for the info on the gigabyte HD3.  I too have the same board and got high sierra working.

 

My final setup looked like this:


./EFI/CLOVER/kexts/Other:
FakeSMC.kext
IntelGraphicsFixup.kext
IntelMausiEthernet.kext
Lilu.kext
NvidiaGraphicsFixup.kext
USBInjectAll.kext
VoodooHDA.kext
XHCI-300-series-injector.kext

./EFI/CLOVER/ACPI/patched:
SSDT-UIAC.aml

Clover config.plist attached.

 

I used the SSDT-UIAC.aml file from the first post. When this boots I get a couple of pages of very fast scrolling errors at the start of the boot, so i think it's probably not perfect.  I tried the SSDT-GPRW.aml hotpatch (on its own) but this did not work - everything was ok but I was left without SS USB (usb3.0).  I could see only HS USB devices in IOReg.  Going back to just the SSDT-UIAC.aml fixed this.

 

I tried the HDA route but without success.  Instead opted for VoodooHDA which worked first time with no problems, including vol controls and mute.

 

Overall a successful OSX86 install but not a painless one.

 

P.S. My system specs: NVidia GTX 1050 Ti / 8GB / 500gb samsung 570evo nvme / i7 8700 / gigabyte H370 HD3 v1.0 / Single hdmi monitor.

config.plist

 

Glad to hear it works for you. You might want to move XHCI-300-series-injector.kext to /L/E instead of Clover.

Regarding Sound, I'm having the best experience with toleda's realtekALC script, although this Needs to run on every OS update.

 

Since 13.6 I'm having trouble getting the System to sleep. It's either the MacOS update or the new bios F4 wich I applied. I Need to check this further. 

Share this post


Link to post
Share on other sites
On ‎8‎/‎8‎/‎2018 at 2:12 PM, killmonster said:

I am stuck at the install step.

 

I have h370 hd3, bios is f2 (I have tried manually changing the bios settings and using hack2)

I Beleive that I have followed every single step correctly, but I still get a prohibited sign and "waiting for root device" when I load in verbose. 

 

Please, if anyone knows what I am doing wrong, help me! 

 

Thanks in advance. 

 

Hi @killmonster, are you still stuck? When do you see the error? After or before Clover? When you try to enter the insalled or OS or when you try to boot the MacOS install medium? Please make sure that you set the SSD Operation to AHCI. Are you using an M.2 SSD or SATA SSD? 

 

It's advisable to use a recent version of AptioMemory.kext fix and Combine it with ApfsDriverLoader. This way you don't need to add the apfs driver to your clover folder. I will add this to the guide.

On ‎7‎/‎17‎/‎2018 at 11:07 AM, sbreckler said:

Hello,

 

I did as described in the thread above but I still have some problems:

  • Only the one USB 3.1 Port is working
  • No sound card detected (no problem for me I have an extra USB card)
  • Shutdown "seems to work" but when I want to start the PC reboots in a loop until I cut the power for some time. 

Does someone have a solution for this problems? Could someone share the EFI folder?

 

Ps. I removed nvidia driver because I have a rx 580.

 

Thanks in advance

 

Hi @sbreckler, how is the Status now? 

Share this post


Link to post
Share on other sites
On ‎7‎/‎14‎/‎2018 at 7:37 PM, BackwardMac said:

 

 

I success by playing with the frame buffer I had to change some port with patches, but thank you for your help.

Could you maybe detail your changes? It might be valuable input for others.

Share this post


Link to post
Share on other sites
On 5/30/2018 at 2:19 PM, RandomTech said:

Very nice and well explained guide, but really is there still need for the .sh command? I used that in earlier versions of OS X and it always caused me buzzing noise after about 3 min when nothing was playing. Now after discovering AppleALC and Lilu my Audio seems like heaven for me.

 

I'm getting back to to you reaaally late. So far the .sh command is the only way to make it work for me. I have no buzzing noise and things work fine, but's a change in the system via script. I'd like to avoid it..

Share this post


Link to post
Share on other sites

Hi Everyone,

 

First, thx a lot for this fabulous guide :)

 

My Gigabyte H370 HD3 works fine... here are the specs :

 

Mac OS X High Sierra 10.13.6.02

Gigabyte H370 HD3 rev. 1.0 LGA 1151
Intel i5-8600k
2x4Go DDR4 2666Mhz CL16
+ Apple AMD Radeon HD 5870 for Mac Pro 1 Go [PCI Express 2.0 x16]

BIOS Version F4 2018/07/20 : https://www.gigabyte.com/Motherboard/H370-HD3-rev-10#support-dl-bios

 

My problem is that I c'ant make audio works !

 

I followed the advices in 2.3 chapter : "Enable onboard audio".

--> I installed kexts files as asked and ran then ALC script.

--> But this one give me always the same errors. Please see below :

 

machaons-iMac:~ machaon$ /Users/machaon/Downloads/audio_cloverALC-130_v0.5.command ; exit;
 
Agreement
The audio_cloverALC script is for personal use only. Do not distribute
the patch, any or all of the files or the resulting patched AppleHDA.kext
for any reason without permission. The audio_cloverALC script is
provided as is and without any kind of warranty.
 
File: audio_cloverALC-130.command_v0.5
Release Mode
Password:
EFI partition is mounted
System Integrity Protection status: enabled (Custom Configuration).

Configuration:
	Apple Internal: disabled
	Kext Signing: disabled
	Filesystem Protections: disabled
	Debugging Restrictions: disabled
	DTrace Restrictions: disabled
	NVRAM Protections: disabled
	BaseSystem Verification: disabled

This is an unsupported configuration, likely to break in the future and leave your machine in an unknown state.

OK to patch
/Users/machaon/Downloads/audio_cloverALC-130_v0.5.command: line 902: [: =: unary operator expected
Supported RealtekALC codecs: 885, 887, 888, 889, 892, 898, 1150, 1220 and 1220A (0 to exit)
Enter codec: 887
ALC887 v_ not supported
Use Legacy (v100202) Patch (y/n): y
ALC887, Audio ID: 7 is not supported, continue (y/n): y
Vaild Audio IDs:
1 - 1/3/5/6 port Realtek ALCxxx audio
2 - 3 port (5.1) Realtek ALCxxx audio, Pink and Blue ports repurposed to outputs
Clover Audio ID Injection (y/n): 1
Try again...
Clover Audio ID Injection (y/n): y
Enter valid Audio ID (0 to exit): 1
Motherboard (300/200/x299/x99/Other = n): 300

Download ALC887 files ...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 23974  100 23974    0     0  37663      0 --:--:-- --:--:-- --:--:-- 37694
887 files copied to /tmp/887
Edit config.plist/Devices/Audio/Inject/1
Edit config.plist/SystemParameters/InjectKexts/Yes
Download kext patches
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  2108  100  2108    0     0   4336      0 --:--:-- --:--:-- --:--:--  4328
Kaby Lake audio controller patch
Download config kext and install ...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  4223  100  4223    0     0   8346      0 --:--:-- --:--:-- --:--:--  8345
Install /Volumes/EFI/EFI/CLOVER/kexts/Other/realtekALC.kext
Install System/Library/Extensions/AppleHDA.kext/ALC887 zml files
Fix permissions ...
Kernel cache...
rebuilding //System/Library/PrelinkedKernels/prelinkedkernel
Kext with invalid signatured (-67062) allowed: <OSKext 0x7fc9c4e33e60 [0x7fff9c9f0af0]> { URL = "FakeSMC.kext/ -- file:///Library/Extensions/", ID = "org.netkas.driver.FakeSMC" }
Kext with invalid signatured (-67062) allowed: <OSKext 0x7fc9c8a916f0 [0x7fff9c9f0af0]> { URL = "IntelMausiEthernet.kext/ -- file:///Library/Extensions/", ID = "com.insanelymac.IntelMausiEthernet" }
Kext with invalid signatured (-67062) allowed: <OSKext 0x7fc9c882b7a0 [0x7fff9c9f0af0]> { URL = "FakePCIID.kext/ -- file:///System/Library/Extensions/", ID = "org.rehabman.driver.FakePCIID" }
Kext with invalid signatured (-67054) allowed: <OSKext 0x7fc9c77d4c60 [0x7fff9c9f0af0]> { URL = "AppleHDA.kext/ -- file:///System/Library/Extensions/", ID = "com.apple.driver.AppleHDA" }
Kext with invalid signatured (-67062) allowed: <OSKext 0x7fc9c7363530 [0x7fff9c9f0af0]> { URL = "USBInjectAll.kext/ -- file:///System/Library/Extensions/", ID = "com.rehabman.driver.USBInjectAll" }
Kext with invalid signatured (-67062) allowed: <OSKext 0x7fc9c725e050 [0x7fff9c9f0af0]> { URL = "FakePCIID_Intel_HDMI_Audio.kext/ -- file:///System/Library/Extensions/", ID = "org.rehabman.injector.FakePCIID-Intel-HDMI-Audio" }
Kext with invalid signatured (-67062) allowed: <OSKext 0x7fc9c71a7ad0 [0x7fff9c9f0af0]> { URL = "AppleALC.kext/ -- file:///System/Library/Extensions/", ID = "as.vit9696.AppleALC" }
Kext with invalid signatured (-67062) allowed: <OSKext 0x7fc9c4d3c250 [0x7fff9c9f0af0]> { URL = "Lilu.kext/ -- file:///System/Library/Extensions/", ID = "as.vit9696.Lilu" }
KernelCache ID: A2667143218323B61BD0B4CE2F23FFC7
kextcache updated critical boot files, requesting launchd reboot

Install finished, restart required.
To save a Copy of this Terminal session: Terminal/Shell/Export Text As ...
logout
Saving session...
...copying shared history...
...saving history...truncating history files...
...completed.

[Opération terminée]

I restart and nothing in pref > audio > output :(

 

 

Can U please help me ?

Thank a lot guys :)

Please find my config.plist attached.

config.plist

Share this post


Link to post
Share on other sites

Help! I'm having trouble with the installation. I've followed all the steps exactly as described more than once and I'm getting stuck after clover every time. 

I'm running a i5 8600 with the Gigabyte H370 HD3 (Rev. 1.0) (planing to use iGPU).

 

I've attached my EFI and a photo of where I'm stuck. Also I'm running the F2 bios with the profile provided.

 

 

19f064b1-d09a-4a48-a1f8-e7a97a1d822b.jpg

EFI.zip

Share this post


Link to post
Share on other sites
On ‎9‎/‎18‎/‎2018 at 4:49 AM, interrock said:

Help! I'm having trouble with the installation. I've followed all the steps exactly as described more than once and I'm getting stuck after clover every time. 

I'm running a i5 8600 with the Gigabyte H370 HD3 (Rev. 1.0) (planing to use iGPU).

 

I've attached my EFI and a photo of where I'm stuck. Also I'm running the F2 bios with the profile provided.

 

 

19f064b1-d09a-4a48-a1f8-e7a97a1d822b.jpg

EFI.zip

 

Seems like you are missing essential kexts. Does this occur when you wan to install, or after you installed to your SSD and try to boot from the SSD?

Are you loading FakeSMC.kext ?

 

You can updated to the newest Bios no Problem - it's a good idea to be up-to-date with the flaws in the Intel Chips. 

On ‎9‎/‎16‎/‎2018 at 6:58 PM, machaon83 said:

I also tried the method below, can it produce a conflict ?

thx

Capture d’écran 2018-09-16 à 18.56.32.png

 

I personally stay away from to****ac tools, and I'd strongly suggest to not discuss These tools here. If you want to use these tools, please ask in their forum. 

 

Regarding Audio: Your Audio ID should be layout 1, you can also try 3. Don't mix up methods. The ALC script also doesn't produce any error, it looks fine to me apart from the Audio layout 7, which you don't have. If you use the script, please follow the instructions toleda has given for ist usage. You need a vanilla AppleHDA and EFI Needs to be mounted. 

 

Could you next time post in one answer instead of creating three? That makes Things easier. You can edit your posts in this great forum :)

Share this post


Link to post
Share on other sites

我个人远离****交流工具,我强烈建议不要在这里讨论这些工具。如果您想使用这些工具,请在他们的论坛中提问。 

 

关于音频:您的音频ID应该是布局1,您也可以尝试3.不要混淆方法。ALC脚本也不会产生任何错误,除了你没有的音频布局7外,它看起来不错。如果您使用该脚本,请按照toleda提供的使用说明进行操作。您需要安装香草AppleHDA和EFI需求。 

 

您下次可以在一个答案中发帖而不是创建三个答案吗?这使事情变得更容易。你可以在这个伟大的论坛编辑自己的帖子 :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By rtke333
      Hi!

      Could anyone help me installing High Sierra on this system?
      I succesfully installed Sierra before on this system with help of Jake Lo (thanks!!), I just wondering if could High sierra possible to installed on this system?
      Boot stopped at this. I'll attach my Clover folder and a picture from boot.
      UEFI enabled, and for skylake I used IntelGraphicsDVMTfixup and IntelGraphicsFixup kexts. My bios is very limited and does not have any option to change dvmt prealloc or anything else.
      Everything works fine on Sierra.
      Here is my system:
       
      THIS TOPIC IS OUTDATED AND WILL NO LONGER UPDATED.
      PLEASE GO TO THIS LINK FOR GUIDE & UPDATED FILES:
      https://www.insanelymac.com/forum/topic/338103-guide-acer-aspire-v-15-v5-591g-mojave-windows/
       


      Acer Aspire V15 V5-591G-55TU
       
      (Note: Bootpack works fine with another versions of 591G, for example: V5-591G-71K2, -764Z, -59PU, etc.)

      Mobo: Skylake USOPP_SLS
      Bios: Insyde corp latest version
      CPU: Intel Core i5-6300HQ 2.30 GHz (Skylake)
      GPU: Geforce GTX 950M 2 GB (optimus, disabled), Intel HD 530
      Ram: 8 GB DDR4 (4+4 GB)
      Wifi: Qualcomm Atheros QCNFA344A, Replaced to BCM94352Z
      Ethernet: Realtek 8168B/8111B
      Audio: ALC 255 (layout-3 fix)
      Card Reader: Realtek
      HDD: 1 TB
      Dual-boot with Windows 10

      Any help appreciated!

      UPDATE! (2017.10.30)
      UPDATE! (2017.11.09)
      UPDATE! (2018.02.01)

      Successfully installed High Sierra 10.13, 10.13.1, 10.13.3
      SEE THIS POST: #49 IF YOU THINK YOUR CPU IS HOT (60+°C) OR NOT GOING UNDER 1.3GHz FREQUENCY WHEN IDLE
      (Original OSXLatitude post link: http://forum.osxlatitude.com/index.php?/topic/10077-success-acer-aspire-v-15-v5-591g-55tu-high-sierra-dual-boot-windows/)
      Working:
      Wi-Fi and Bluetooth with BCM94352z: (enabled with BrcmFirmwareRepo.kext, BrcmPatchRAM2, FakePCIID.kext, FakePCIID_Broadcom_WiFi.kext, install them with Kext Utility or another kext installer) (Original WiFi is Qualcomm Atheros, unsupported but BT works) Hand-off with BCM94352z Full Graphics enabled on HD 530, HDMI, VGA. ALC 255 Audio: (Internal Speakers, Internal Microphone, Headphone jack (microphone not tested) with layout-3 fix (you can use AppleHDAPatcher) Ethernet Realtek 8168B/8111B App Store, Messages, FaceTime, Siri, iCloud (native) Integrated webcam (native) 3.0 USB (native) Touchpad and Keyboard: Fn keys are good, the weird thing is the Brightness key. On my keyboard it's Pause Break:Br-up, Fn+F12:Br-dwn. (VoodoPS2Controller.kext) Battery info: Install ACPIBatteryManager.kext with kext utility or other installer. Sleep Mode: In High Sierra sleep mode not worked for me natively. Inject custom EDID to fix the blank screen after wake from sleep
      See here for instruction (thanks black.dragon74 and Jake Lo !!) Please add these 2 patches to ACPI\DSDT\Patches in your config.plist in order to avoid not responding applications after sleep: (added in "v5_591g_55tu_updated_CLOVER.zip") HECI to IMEI 48454349 494d4549 EC0 to EC 4543305f 45435f5f Before updating to a new version of High Sierra please update kexts to new versions to avoid kernel panics Note: No need for "IntelGraphicsDVMTFixup.kext" so you should delete it. Not working:
      Original Wi-Fi: Qualcomm Atheros QCNFA344A unsupported, you need switch to BCM94352Z or just use a mini usb wifi dongle. NVIDIA GTX 950M: Optimus not supported. Card Reader: Unsupported For WiFi:
      You can choose an external USB wifi dongle (I used tp-link Archer T1U (5GHz support), Tp-link have official macOS drivers, you just need to install it (OR)Replace your M.2 Qualcomm Card with a compatible BCM94352Z card (you will have hand-off Bluetooth too), just install the kext I wrote above I'll attach my EFI folder for anyone who want to install High Sierra (acer_aspire_v5_591g_55tu_hs.zip).
      *REUPLOADED updated CLOVER folder, attached as "v5_591g_55tu_updated_CLOVER.zip" (uploaded to OSXLatitude forum, can't upload here).
       
      I'm using High Sierra in Dual-boot with Windows 8.1. To do this in a clean install or with Windows installed first try my little minimal guide:
       
      Dual-boot clean install (on one drive):
      1. Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it's no matter what), 1 for Mac), 
      2. Install Mac, boot with your USB, *mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder, copy the CLOVER folder I attached to the EFI folder, restart,
      3. Boot into your Win installer, Format the partition you created for Win, install. 
      4. Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:
      bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi 5. You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      Dual-boot with Windows installed first (on one drive):
      If you already have Windows and you don't want to lose all your data there is a hope:
      You need bootable Mac Installer and a full system restore image (you can search for it).
      (You may see errors if your EFI partition is not 200 MB)
      1. Boot into your Windows, resize your partition or create one for Mac.
      2. Boot into your Mac installer and in Disk Utility format the partition you created.
      3. Restore from image: select your full system restore image.
      4. When it's finished restoring you just need to restart, then boot to the system with your usb.
      5. Do Step 2. from "*" from clean install dual-boot above. but KEEP "Microsoft" FOLDER IN IT!
      6. Do Step 4. from clean install dual-boot above.
      7. You're done! You can select your old Windows and your new macOS!
      (I only tried with Windows 8/8.1/10. I don't know Windows 7,etc.)
       
      IF YOU GETTING ERRORS DURING MAC RESTORE:
      Make sure you have partitions in GPT The best version for restore method is Windows 8.1. It's using 200 MB EFI. Windows 10 using 100 MB EFI and will annoy the Mac restore. You can use with Windows 10, just ignore the errors IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      Make sure you have GPT partitions, and GPT installer IF YOU USED RESTORE METHOD THEN CAN'T MOUNT YOUR EFI PARTITION (No EFI partition found)
      It's because your EFI is not 200 MB or not an "Apple" original EFI,  but do not worry, try another EFI mounter, or mount from terminal (I used EFI mounter v3: Getting errors, but you can mount and use without problem) You also could "mount" the EFI from windows, for that open cmd and type: diskpart list vol (Now select the "System" volume,(FAT 32) For example I select 4) sel vol 4 list part (Select System type partition, for example 2) sel part 2 assign letter=b (This will "mount" your EFI partition, to manage files download totalcmd or explorer++ (run as admin)) remove letter=b (This will "unmount" your EFI) Here is a video from dual-boot with Windows installed first (on one drive):
      https://www.youtube.com/watch?v=0_Q8uPkwcWQ
      Here some pictures:




    • By MaLd0n
      ---INSTALLATION TUTORIAL---
       
      ---Original Post---
      https://olarila.com/forum/viewtopic.php?p=77102#p77102
       
      ---CLOVER FOLDER---
       
      CLOVER.zip
       
       
      --MOBO
      GigaByte Z390 M Gaming



      --PROCESSOR
      Intel Core i9-9900K


      --COOLER
      CoolerMaster MasterLiquid ML120R RGB


      --MEMORY
      Corsair Dominator Platinum 16GB (2 x 8GB)


      --GPU
      Sapphiretech Radeon RX 590 8 GB GDDR5


       
      --SSD
      Samsung 970 EVO NVMe M2 Flash Drive


      --POWER SUPPLY
      EVGA 750 N1, 750W


      --WIRELESS
      TP-Link Archer T9E


      --BLUETOOTH
      Orico BTA-403


      --CASE
      Thermaltake View 21 Tempered Glass Edition


      --DSDT Patches--
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 10 ID -DMAC -REMOVE 22K LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM / REAL TIME CLOCK -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--





























      --BruceX--
       
      --USB-C-- test with SanDisk Ultra USB-STICK 128gb


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By Mieze
      This project is dedicated to the memory of Mausi, the cat I loved more than anybody else.
       

       
      A few days before Christmas I started my latest project, a new driver for recent Intel onboard LAN controllers. My intention was not to replace hnak's AppleIntelE1000e.kext completely but to deliver best performance and stability on recent hardware. That's why I dropped support for a number of older NICs. Currently the driver supports:
       
      5 Series
      82578LM 82578LC 82578DM 82578DC 6 and 7 Series
      82579LM 82579V 8 and 9 Series
      I217LM I217V I218LM I218V I218LM2 I218V2 I218LM3 100 Series (since V2.1.0d0)
      I219LM I219V 200 Series (since V2.3.0d0)
      I219LM I219V 300 Series (since V2.4.0d0)
      I219LM I219V  
      Key Features of the Driver
      Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). Support for TCP/IPv6 and UDP/IPv6 checksum offload. Makes use of the chip's TCP Segmentation Offload (TSO) feature with IPv4 and IPv6 in order to reduce CPU load while sending large amounts of data (disabled due to hardware bugs). Fully optimized for Sierra (64bit architecture) but should work with older 64bit versions of macOS too, provided you build from source with the appropriate SDK for the target OS. Support for Energy Efficient Ethernet (EEE). VLAN support is implemented but untested as I have no need for it. The driver is published under GPLv2.  
      Current Status
      The driver has been tested successfully with I217V, I218V and 82579V under 10.9.5 and above. The attached archive includes source code as well as a prebuilt binary (debug version) for Mavericks and newer versions of macOS.   Known Issues
      There seem to be problems while using VMware with version 1.x.x of the driver. In case you are affected use version 2.0.0 or newer.  
      FAQ
      Could you add support of for...? Well, you are probably asking me to add support for one of the older NICs like the 82571/2/3/4L or 82583 and the answer will be no as I dropped support for these chips intentionally. They are broken and I lost more than 2 weeks trying to make it work on the 82574L without success. I was asked to add support for I210, I211 and I350 but as these chips have a completely different architecture, which isn't supported by the underlying Linux driver, this is impossible, sorry. Does it work with Snow Leopard or 32 bit kernels? No and I have no plans to make a version for 32 bit kernels or anything older than Lion. WoL from S5 doesn't work with this driver but under Windows it's working. Is this a driver bug? No it isn't, the driver is working as it should because OS X doesn't support WoL from S5.  
      Installation
      Goto /S/L/E and delete AppleIntelE1000e.kext. Recreate the kernel cache. Open System Preferences and delete the corresponding network interface, e. g. en0. Reboot. Install the new driver and recreate the kernel cache. I recommend to use Kext Wizard or a similar utility for the installation. Reboot Open System Preferences again, select Network and check if the new network interface has been created automatically or create it manually now. Configure the interface.  
      Help - I'm getting kernel panics!
      Well, before you start complaining about bugs after you upgraded macOS and ask me to publish a driver update, you should first try to resolve the issue on your own by cleaning the system caches.
      As the driver uses macOS's private network driver interface, which is supposed to be used by Apple provided drivers only, you might run into problems after an OS update because the linker may fail to recognize that IONetworking.kext has been updated and that the driver needs to be linked against the new version (Apple provided drivers avoid this problem because they are always updated together with IONetworking.kext). As a result, the linking process produces garbage and the driver may call arbitrary code when trying to call functions from IONetworking.kext. This usually results in unpredicted behavior or a kernel panic. In order to recover from such a situation, you should clean the System Caches forcing the linker to recreate it's caches:
      Delete all the files in /System/Library/Caches and it's subdirectories but leave the directories and the symbolic links intact. This is very important! Reboot. Recreate the kernel cache. Reboot again.  
      Troubleshooting
      Make sure you have followed the installation instructions especially when you have issues with certain domains while the others are working fine. Use the debug version to collect log data when trying to track down problems. The kernel log messages can be retrieved with "grep kernel /var/log/system.log" in Terminal. Starting from Sierra use "log show --predicate "processID == 0" --debug" in order to retrieve kernel logs. Include the log data when asking for support or giving feedback. I'm an engineer, not a clairvoyant. Don't copy and paste large amounts of log data to your post. Create an archive with the log data and attach it to your post. In case you don't want to make your log data publicly accessible, contact me via PM and I will provide you a mail address to send it directly to me.  Check your BIOS settings. You might want to disable Network Boot and the UEFI Network Stack as these can interfere with the driver. Double check that you have removed any AppleIntelE1000e.kext from your system because it could prevent the driver from working properly. Delete the following files: /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist /Library/Preferences/SystemConfiguration/preferences.plist Verify your bootloader configuration, in particular the kernel flags. Avoid using npci=0x2000 or npci=0x3000.  In Terminal run netstat -s in order to display network statistics. Carefully examine the data for any unusual activity like a high number of packets with bad IP header checksums, etc. In case auto-configuration of the link layer connection doesn't work it might be necessary to select the medium manually in System Preferences under Network for the interface. Use Wireshark to create a packet dump in order to collect diagnostic information. Keep in mind that there are many manufacturers of network equipment. Although Ethernet is an IEEE standard, different implementations may show different behavior causing incompatibilities. In case you are having trouble try a different switch or a different cable. Changelog
      Version 2.4.0 (2018-04-14) Added support for 300 series versions of I219LM and I219V. Updated underlying Linux source code. Version 2.3.0 (2017-06-20) Added support for 200 series versions of I219LM and I219V. Version 2.2.0 (2016-09-23) Disabled TSO to work around a hardware bug. Version 2.1.0 (2016-05-24) Added support for I219LM and I219V Version 2.0.0 (2015-04-22) First official release which is identical to 2.0.0d2 (only the version number has been changed). Version 2.0.0d2 (2015-04-04) Changed the tx descriptor write back policy for 82579, I217 and I218 to prevent random tx deadlocks. Version 2.0.0d1 (2015-03-14) Uses Apple's private driver interface introduced with 10.8. Supports packet scheduling with QFQ Solves the VMware issue. Version 1.0.0d6 (2015-03-04) Reworked TSO6 support to avoid problems with VMware. Wake-on-LAN now working. Version 1.0.0d5 (2015-02-27) Reworked TSO4 support to eliminate the bug of 1.0.0d4. Added some debug code in order to collect information about the VMware related issue. Version 1.0.0d4 (2015-02-25) Set total length field of the IP-header to zero for TSO4 operations. Report EEE activation state in kernel log message when the link has been established. Version 1.0.0d3 (2015-02-11) Reworked media selection and EEE support (EEE is now activated when both link partners support it. It can be disabled selecting the medium manually). Duplex setting for 10/100 MBit connections is now reported correctly. The number of tx descriptors has been reduced from 2048 to 1024. The code has been cleaned up and obsolete files have been removed. Version 1.0.0d2 (2015-01-31) First development release. Getting the Driver
      The source code can be found on GitHub: https://github.com/Mieze/IntelMausiEthernet There is also a prebuilt binary for 10.11 and above in the download section: http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/ Build from Source for 10.8
      Register as a developer on Apple's developer website. A free membership is sufficient. Download a copy of Xcode 5.1.1 and install it on your machine. In the project select 10.8 as the "Base SDK" and the "Deployment Target". Call "Archive" from the menu "Product" and save the built driver. Credits
      Thanks to RehabMan and Yung Raj for running tests and pointing me in the right direction while I was trying to fix TSO. Special thanks to Yung Raj for motivating me when I was about to give up.
    • By End3rPower50
      Hi, i've installed on my pc MacOS Mojave but after installation my pc, sometimes, crash giving kernel panic.
      I came to the conclusion that it is a random kernel panic because sometimes it starting up and other times it isn't starting up
       
      My PC:
      CPU: Intel i7 6500U
      LAN: RTL8100
      Wi-Fi & Bluetooth: Dell DW1820A
      USB 3.1
       
      CLOVER.zip
    • By Angelo_
      Hi, I followed the rehabman guide (linked in the vanilla guide on the side of r/Hackintosh, not sure if I can link it) for laptops for my yoga 730ILW13 with an 8265u, Conexant 11870, 8gb of ram, 13.3" fhd and I found that upon booting the installer usb I get this weird issue where the screen displays what it should but the screen is incredibly dim (though it was off before using a flashlight on it) and it flashes every few seconds for a few milliseconds to the correct brightness, I used the plist for hd615-650 (including my 620), not quite sure what could be the culprit, first time hackintoshing a laptop so it might be a stupid brightness kext I forgot but didn't find any in that post or in this forum :c 
      Attached the clover zip so that anyone with more experience than me might give an idea in what could be a way to fix this.
      Thank you in advance 
       
       
       
      CLOVER.zip
×