Preciso de ajuda para terminar um meu hackintosh, alguém poderia me ajudar?
Boa tarde a todos, gostaria de ajuda com o meu hackintosh, estou fazendo um hack em um notebook Dell 5557, as configurações estão abaixo.
Modelo: Intel Core i7 - 6ª Geração Intel Core i7-6500U
Velocidade: 2.5 GHz até 3.1 GHz com Max Turbo Cache: 4Mb
Memória RAM Quantidade: 16GB DDR3L 1600MHz (2X8).
Armazenamento Capacidade: 240 GB SSD
Tela Tamanho:15.6” Resolução: FULL HD 1920x1080p Touch
Webcam integrada de alta definição (720p) com microfone digital
Gráfico Integrado Intel HD 520
NVIDIA® GeForce 930M com 4GB DDR3 Dedicada
Dell Wireless 1705 WiFi
1x HDMI 1.4ª
2x USB 3.0
1x USB 2.0
1x Ethernet 10/100 RJ-45
1x Entrada de Cartão 5 em 1 (SD, SD 3.0, SDHC, MS e MS PRO)
Leitor de Cartão
Tipo: SD, SDHC, SD3.0, MS, MS Pro
Alimentação Bivolt 3 células 43Wh
Os problemas que encontrei ate agora foram.
O que não funciona?
BRILHO DA TELA
GERENCIAMENTO DE ENERGIA NAO SEI COMO SABER SE FUNCIONA
GRAFICOS DEDICADOS NVIDEA 930M
O QUE FUNCIONA?
PLACA DE REDE
AS DSDT E AS SSDT?
Nao sei como fazer para esse modelo mais ja extrai as originais mais nao sei quais arquivos usar e quais pachs ativar,
alguém poderia me ajudar a terminar esse hack por favor. Desde ja obrigado.
A setup with an IVY bridge e5430 dell worked fine. but now seems the XHC device
is a hardware issue. There is no bios setting to enable disable. Only enable/disable boot/external.USB in general.
All set to enable. Also just mention of USB in power settings wake on USB.
Did show up when I set up the ports w/USBINJECTALL, then was working on imessage isssue when the DSDT
stopped loading after updating clover. I had two versions of MAcIasl. One with iasl 6. and one had 6.2a. Kept
the 6.2a, was RM's most recent. One problem Im confused by is it compiles fine but after saved if its opened,
the error that was repaired comes back.
If (LEqual (PM6H, One))
CreateBitField (BUF0, \_SB.PCI0._Y0C._RW, ECRW) // _RW_: Read-Write Status
Store (Zero, ECRW (If (PM0H)
CreateDWordField (BUF0, \_SB.PCI0._Y0D._LEN, F0LN) // _LEN: Length
Store (Zero, F0LN)
Loads with the error but not sure what happened on the original that worked.
Going over the boot log, The XHC device is there under the PCI readings dont think hardware issue... 1e31 Just seems the saved DSDT should not
have errors after saved, but using the other version of Maciasl, the DSDT would save without errors and open without but it would not load.
acted like there was no FakeSMC...
Edit: Seems all the saved DSDT have that error when re-opened using that version RM's Maciasl w/iasl v.6.2a but seems to load fine.
Hello, I am new here, so I apologize if I've chosen the wrong subforum for this question.
I am scratching my head a bit on an issue with a clients MacBook pro. He was having USB connection issues and claimed the laptop wasn't detecting any USB connected to it.
Figuring it was a failed USB port, I took it in but ended up just feeling more confused after doing some diagnostics.
It came in loaded with Catalina, a recent upgrade spurned the beginning of the issues the client told me.
I decided to revert it back to the default OS in the base recovery image, which is Yosemite.
Upon finishing the install, I found that the USB port was in fact working again. Figuring I had resolved the issue, I updated it back to Catalina just to be met with the same issue upon reinstalling.
Tried nvram, pram, and smc reset each to no avail.
One thing to note is that during boot, the USB is getting power as it lights up when connected during boot up.
But the ports are dead as soon as it boots into the operating system.
I have a strong feeling that this is a driver issue. I tried unloading and reloading the USB IO kext, with no noticable change.
Is anyone here familiar with this issue? Would there be any other kext related troubleshooting i can perform ? Is it possible to revert to the kext used in Yosemite on catalina ?
One last thing to note, on Yosemite the USB was functioning 100%. But I did get a strange notification that the USB ports were using power even when there wasn't any connected to it. Either way, I find it very very odd that it works perfectly in Yosemite.
Thanks in advance
Gigabyte, in their infinite wisdom, decided to remove the option to disable serial ports, and not being able to do so has been causing me some problems. I know that I have to either use a patch in clover, or create a custom SSDT to disable super I/O, but I honestly do not know how to go about doing this. One of the weirder problems I'm experiencing is the inability to connect to Apple Music (error 11556) unless I go into my network settings, and delete my serial connection. If anyone could help me out with this, that'd be greatly appreciated; anyway, thank you for taking the time to read this.
Mobo GIGABYTE Z390 M GAMING (UEFI F8)
CPU: i5 9600k
RAM: 32GB DDR4 @ 2666 Mhz
GPU: AMD Radeon RX 580 w/ 8GB of VRAM (MSI armor oc edition)
Storage Samsung 970 evo 500GB