The following files exist on the github:
Is (a) for installing as an app on OSX? What is it for?
What is (b) for, the .pkg? Not exactly familiar with .pkg. I've seen it used in UNIX, but I believe it's also a PKG format for installing packages on OSX. So, what is the difference between this (b), and (a)? (a) is labeled v1.11-5100, while (b) is labeled v2.5k_r5100.
(c) contains only this file, Clover-v2.5k-5100-X64.iso, which I assume is a pre-bootloader.
(d) looks like the NON ISO version, to build an ISO?
(e) Contains CLOVERX64.efi, which is the same CloverX64.efi for Clover.app-v1.11-5100 and CloverV2-5100.zip
Thanks for any explanations.
Hi all, I have been using an x240 thinkpad for more than 2 months as hackintosh and it is very stable. As of now I am in Catalina 10.15.1 and it’s running great until I updated it to the new clover build r5100. My laptop won’t automatically sleep when I close the lid down now. I reverted back to 5099 and close-lid automatic sleep works. I don’t know what caused the problem but I think 5100 fixed a dsdt patching of some sort that that conflicted with my config plist? Thanks in advance!
Preciso de ajuda para terminar um meu hackintosh, alguém poderia me ajudar?
Boa tarde a todos, gostaria de ajuda com o meu hackintosh, estou fazendo um hack em um notebook Dell 5557, as configurações estão abaixo.
Modelo: Intel Core i7 - 6ª Geração Intel Core i7-6500U
Velocidade: 2.5 GHz até 3.1 GHz com Max Turbo Cache: 4Mb
Memória RAM Quantidade: 16GB DDR3L 1600MHz (2X8).
Armazenamento Capacidade: 240 GB SSD
Tela Tamanho:15.6” Resolução: FULL HD 1920x1080p Touch
Webcam integrada de alta definição (720p) com microfone digital
Gráfico Integrado Intel HD 520
NVIDIA® GeForce 930M com 4GB DDR3 Dedicada
Dell Wireless 1705 WiFi
1x HDMI 1.4ª
2x USB 3.0
1x USB 2.0
1x Ethernet 10/100 RJ-45
1x Entrada de Cartão 5 em 1 (SD, SD 3.0, SDHC, MS e MS PRO)
Leitor de Cartão
Tipo: SD, SDHC, SD3.0, MS, MS Pro
Alimentação Bivolt 3 células 43Wh
Os problemas que encontrei ate agora foram.
O que não funciona?
BRILHO DA TELA
GERENCIAMENTO DE ENERGIA NAO SEI COMO SABER SE FUNCIONA
GRAFICOS DEDICADOS NVIDEA 930M
O QUE FUNCIONA?
PLACA DE REDE
AS DSDT E AS SSDT?
Nao sei como fazer para esse modelo mais ja extrai as originais mais nao sei quais arquivos usar e quais pachs ativar,
alguém poderia me ajudar a terminar esse hack por favor. Desde ja obrigado.
A setup with an IVY bridge e5430 dell worked fine. but now seems the XHC device
is a hardware issue. There is no bios setting to enable disable. Only enable/disable boot/external.USB in general.
All set to enable. Also just mention of USB in power settings wake on USB.
Did show up when I set up the ports w/USBINJECTALL, then was working on imessage isssue when the DSDT
stopped loading after updating clover. I had two versions of MAcIasl. One with iasl 6. and one had 6.2a. Kept
the 6.2a, was RM's most recent. One problem Im confused by is it compiles fine but after saved if its opened,
the error that was repaired comes back.
If (LEqual (PM6H, One))
CreateBitField (BUF0, \_SB.PCI0._Y0C._RW, ECRW) // _RW_: Read-Write Status
Store (Zero, ECRW (If (PM0H)
CreateDWordField (BUF0, \_SB.PCI0._Y0D._LEN, F0LN) // _LEN: Length
Store (Zero, F0LN)
Loads with the error but not sure what happened on the original that worked.
Going over the boot log, The XHC device is there under the PCI readings dont think hardware issue... 1e31 Just seems the saved DSDT should not
have errors after saved, but using the other version of Maciasl, the DSDT would save without errors and open without but it would not load.
acted like there was no FakeSMC...
Edit: Seems all the saved DSDT have that error when re-opened using that version RM's Maciasl w/iasl v.6.2a but seems to load fine.