Jump to content
HurricaneX

How To Fix And Enable Hardware Encoding When Rendering In FCP?

1 post in this topic

Recommended Posts

Hey,guys!Is it still possible for my old 775 socket CPU to fix the hardware encoding rendering via FCP on 10.13.4?I was trying to follow this tutorial to regulate my config.plist. https://hackintosher.com/guides/fix-rendering-issues-fcpx-high-sierra/,but it seemed that it didn't work for me!So any suggestions and help will be much appreciated.Attached is the EFI folder.

My EFI:https://drive.google.com/open?id=1lqzF5QUD8E_Csr5qp8sdeSVp6UZGDjoU

My Desktop Wallpaper(Shot by DJI):https://drive.google.com/open?id=1ERLMqN65puLzbFFMrOUergTMegEHLB5A

5ac71dc1869c2_TopofReinebringenforDesktop.thumb.jpg.eca321fc14bd3103c52a29d1ae174549.jpg

My Mobile Wallpaper:https://drive.google.com/open?id=1eG-ZHCgrcb5J2aJ_abdcrzBUOkdZLQ_N

5ac71da6ecdbc_BromoforMobile.thumb.jpg.dc42fc2b2767ac2d3d29aa1a5abcae7c.jpg

5ac6dd0ebf029_ScreenShot2018-04-06at2_18_39AM.thumb.jpg.435782a73e915b6e0b93aef46d195c97.jpg

5ac6db641bb0a_ScreenShot2018-04-06at1_44_44AM.thumb.png.65a10a9680c9ff00d7b3e9311c6c4b02.png

5ac6e2030d442_ScreenShot2018-04-06at2_27_49AM.thumb.jpg.0d272f673aff8e6369fa8741dba36707.jpg

5ac6e4ee03d98_ScreenShot2018-04-06at2_29_13AM.thumb.jpg.0b3ff889a427897a31745f4a92874096.jpg

Edited by HurricaneX
Pic couldn't be uploaded

Share this post


Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By glasgood
      GLASGOOD'S
       
      MOJAVE HACKINTOSH GUIDE 
       
       

       
      **FOR**  GIGABYTE Z390 AORUS PRO
       

       
       
      CREDITS & THANKS
       
      @MaLd0n
      His help with EFI configuration and DSDT
       
      CLOVER  TEAM
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, rehabman, Download-Fritz, Zenit432, cecekpawon Et al
       
      APPLEALC
      Acidanthera, vit9696
       
      VOODOOHDA
      autumnrain, slice2009, zenith432
       
      ESP PRO MOUNTER
      @Micky1979 
       
      HACKINTOOL
      @headkaze
       
      CLOVER CONFIGURATOR
      Mackie100
       
      THEME ENGINE
      Alex Zielenski
       
      INSANELYMAC
      OLARILA
       
      Hackintool Tutorial
      daliansky
       
       
      and many more....
       
      ------------------------------------------------------------------------------------------------------------------------------------------------------------
       
       
       
      PART LIST
       
      • Intel I7 8700 
      • Gigabyte Z390 AORUS PRO
      • Gigabyte AORUS RADEON RX 580 8GB
      • Corsair Vengeance LPX 16GB ( 2 x 8GB ) 2666MHz – CMK16GX4M2A2666C16
      • Corsair RM650x 80 Plus Gold Power Supply Unit
      • Corsair H100i V2 AIO Hydro/Water RGB LED CPU Cooler
      • Samsung EVO 500GB SSD (2.5) macOS Mojave
      • Samsung EVO 250 GB SSD (2.5) Windows 10 Pro
      • NZXT H500 Mid Tower ATX Case
       
      • RECOMMENDED WIFI CARD → ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS  
      OR
      • WIFI and Bluetooth with BCM94331CD with PCI-e adapter (but will require AirportBrcmFixup.kext for AirDrop.. )
       
       
       
      WORKING
       
      • Sound 
      • HDMI audio on RX580
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Handoff
      • Continuity
       
       
       

       

       

       
       
       
       
       
      PART 1 - DOWNLOAD 
       
       
      Download the following:
       
      • CLOVER
       
      • Aorus Z390 Pro EFI .zip
       
      • ESP MOUNTER PRO v1.9
       
      • macOS MOJAVE 
       
      • CLOVER CONFIGURATOR
       
      • EmuVariableUefi-64.efi  ( Used only to initialise iMessages. It then must be removed from Clover drivers64UEFI folder, explained in guide)
       
      • OsxAptioFix2Drv-free2000.efi ( Replace AptioMemoryFix-64.efi post install )
       
       
      OPTIONAL DOWNLOADS
       
      • VoodooHDA.kext.zip 

      • ThemeEngine 
       
      • Assets.car 
       
       
       
      PART 2 - BIOS SETTINGS (version F5 )
       
       
      Here is a list of the BIOS settings that I have used ( Screenshots in spoiler below )
       
      • Enter BIOS → Press F12 → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • BIOS → Windows 8/10 Features → Other OS
      • BIOS → CSM Support → Enabled
       
      • Peripherals → Initial Display Output → PCIe 1 Slot
      • Peripherals → Trusted Computing → Security Device Support →  Disable
      • Peripherals → Intel(R)Bios Guard → Intel BIOS Guard Support →  Disable
      • Peripherals → USB Configuration → Legacy USB Support →  Enabled
      • Peripherals → USB Configuration → XHCI Hand-off →  Enabled
      • Peripherals → Network Stack Configuration → Network Stack →  Disabled
      • Peripherals → SATA And RST Configuration → SATA Mode Selection →  AHCI
       
      • Chipset → Vt-d → Disabled
      • Chipset → Internal Graphics → Enabled
      • Chipset → DVMT Pre-Allocated → 64M
      • Chipset → DVMT Total Gfx Mem → 256M
      • Chipset → Audio Controller → Enabled
      • Chipset → Above 4G Decoding → Enabled
       
      • Power → ErP → Disabled
      • Power → RC6 (Render Standby) → Enabled
       
      // IF USING  CORSAIR H100i V2 AIO CPU WATER COOLER 
      • MIT → Smart Fan 5 Settings → CPU Fan Control mode → PWM 
       
      • Save & Exit → Save & Exit Setup
       
      SCREEN DUMP SPOILERS
       
       
       
       
       
      PART 3 – CREATE A MOJAVE USB FLASH INSTALLER
       
      Prepare USB Installer for Mojave ( Video below )
       
      • Insert USB drive
      • Launch /Applications/Utilities/Disk Utility
      • Disk Utility → View → Show All Devices
      • On Left-hand panel → External →(Identify your USB device in left hand panel)
      • Click and highlight your USB device in the left-hand panel.
      • Click erase button.
      • Name: USB
      • Format: Mac OS Extended (Journaled )
      • Scheme: GUID Partition Map
      • Click Erase button.
       
      • Place the downloaded MacOS Mojave app into Applications folder.
      • Open Terminal copy and paste:
       
      sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --nointeraction && say Mojave Drive Created  • Enter
       
       
       
       
       
       
       
      PART 4 – INSTALL CLOVER ON THE MOJAVE USB INSTALLER 
       
      Make Mojave USB flash drive installer bootable.( Video below )
       
      • Launch Clover application, double click.
      • Click Continue → Continue → Continue 
      • Click Change Install Location button.
      • Click Install macOSMojave USB installer → Continue
      • Click Customize button
      • Choose:
      Clover for UEFI booting only Install Clover in the ESP Themes UEFI Drivers Install RC scripts on target volume • Click Install button
      • Installation Complete!
       
      Video:
       
       
       
       
       
       
      PART 5 – CUSTOMIZE MOJAVE USB INSTALLER FOR AORUS Z390 PRO
       
      Replace Clover EFI folder with the customised AORUS Z390 configuration ( Video below )
       
      • Install ESP Mounter Pro v1.9
      • Using ESP Mounter Pro, Mount ESP on disk2s1 ( Your disk name may be different )
       

       

       
       
       
      • Open mounted EFI partition found on desktop
      • Copy all the contents from Aorus 390 Pro EFI folder
      • Replace USB EFI folder with all the contents inside the Aorus 390 Pro EFI folder.
       
       

       
       
       
       
       
       
       
       
      PART 6 – INSTALL MAC OS MOJAVE ON INTERNAL DRIVE

      • INSERT USB INSTALLER INTO THE USB 2.0 PORT  
       
       
      • Power on PC and press F12• Choose bootable USB drive from boot menu.
       
       
       
      • Install macOS Mojave to internal solid state or hard drive.
       
      NOTE
      During install the system will reboot and you will see onscreen message EXC_CORPSE_NOTIFY exception. This instance is normal,  no skeletons !.
       
       
      When system returns to the Clover boot menu choose:
       
      • Boot macOS Install Prebooter from Preboot
       
       
       
      After next restart choose:
       
      • Boot macOS from Macintosh
       
       
       
      Proceed with macOS Mojave install
       
       
      macOS Mojave is now installed, but it can only boot at this moment thanks to FakeSMC and Clover on the Mojave USB flash drive installer.
       

       
       
       
       
       
       
      PART 7 – MAKE AORUS Z390 PRO INTERNAL DRIVE BOOTABLE
       
      Make internal drive bootable ( Video below )
       
      So far, Aorus Pro can only boot with the aid of the Mojave USB Installer.
      To boot from the internal drive, copy Clover EFI folder from  Mojave USB installer into the  Internal EFI drive.
       
      • Using ESP Mounter Pro, mount internal EFI/ESP partition and external USB EFI/ESP
      • Copy contents from USB EFI/ESP partition and paste into internal EFI/ESP
       
       
      Video:
       
       
       
      • Remove USB Mojave installer and shut down and restart.
       
      Aorus Hackintosh should now be able to boot to macOS Mojave, Done, well almost ! 
       
       
       
       
       
      PART 8 – ENABLE IMESSAGES & FACETIME 
       
       
      Configure Config.plist for iMessages. ( Video below )
       
      • SMBIOS = Mac Mini 8.1
      • Rt Variables —> ROM —> is your MAC address (delete colons from Mac address)
      • MLB field =  Enter serial number generated and append 5 random characters
      • SmUUID = in Terminal run command “uuidgen” and copy it to SmUUID field
      • Board Serial is same as MLB field.
      • Clover Configurator —>  Save 
       
      Video:
       
       
       
      • Mount internal drive EFI/ESP partition
      • Go to folder CLOVER → drivers64UEFI 
      • Delete AptoMemoryFix-64.efi
      • Place both EMUVariableUefi-64.efi and OsxAptoFix2Drvfree2000.efi inside → drivers64UEFI
       
       
      Using Clover Configurator, add the following argument to config.plist using Clover Configurator.
       
      • Slide = 0
       

       
       
      Shutdown and then press power on button on PC.
       
      • You should now be able to Log into iCloud, iMessages and FaceTime
      • NOW delete EMUVariableUefi-64.efi from CLOVER → drivers64UEFI Folder 
      • Shutdown and restart Aorus Pro hackintosh. iMessages etc is now operational without EMUVariableUefi-64.efi ( EMUVariableUefi-64.efi only needed to initialise iMessages )
      • It is important to delete EMUVariableUefi-64.efi, this will avoid very intermittent boot errors such as: “Couldn’t allocate runtime area”  post errors.
       
       
       
       
       
      DEFAULT SSDT –  DEFAULT SSDT USB PORTS FIX CONFIGURATION - SSDT ALREADY INSIDE AORUS Z390 EFI FOLDER
       

       

       

       
       
      Limitation: USB2 devices can not be used on SS03 → SS08
       
       
       
       
       
       
      ------------    GUIDE FINISHED YOU SHOULD NOW HAVE WORKING AORUS Z390 PRO HACKINTOSH  WITH SSDT USB FIX   ------------
       
       
       
       
       
       
      OPTIONAL:  Enable HDMI Audio on RX580
       
       
       
       
       
       
      OPTIONAL:  Replace the default "About This Mac" Apple Logo with RED AORUS APPLE
       
       
       
       
       
       
      OPTIONAL - ALTERNATIVE SSDT 1 –  SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder 
       
       
       
       
       

      OPTIONAL - ALTERNATIVE SSDT 2 -  SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder 
       
       
       
       
       

      OPTIONAL - ALTERNATIVE SSDT 3 – Create your own SSDT
       
       
       
       
       
       
       
      OPTIONAL:  Dual Boot macOS Mojave & Windows 10 
       
       
       
       
       
       
      FOR MORE HACKINTOSH INFORMATION SUCH AS USB PORTS FIX, CLOVER CONFIGURATOR, HACKINTOSH BACKUP WITH CARBON COPY CLONER .....   THEN SEE MY PREVIOUS GUIDE FOR ASUS Z370-G Strix
       
       
       
       
       
       
       
       
       
       
       

       
       
       
       
       
       
       
       
      SSDT-UIAC.aml.zip
      SSDT-UIAC.dsl.zip
    • By SepehrM
      I'm trying to install High Sierra 10.13.3 on an ASUS N552VW laptop, and I get stuck after this message:
      "could not recover SATA HDD after 5 attempts, terminating" 
      And some other warnings afterwards.
      Specs:
      CPU: Intel Skylake 6700HQ 2.6GHz
      RAM: 16GB DDR4
      2TB HDD + 128GB SSD
      GPU: Intel HD Graphics 530 + Nvidia GTX960m
      I'm installing using a 16GB USB3 flash drive on one of HDD volumes (UEFI Mode)
       
      I uploaded the verbose log and clover config.plist
      config-new.plist

    • By Bahaa
      Need help here
      My graphic card is detached 7mb
      and I try a lot of solution and no one work 
      can any one help
       

    • By h2onions
      Hey all,
       
      First Hackintosh that I think I have completed! I've been working on it on and off for a month, but just grinded it this past weekend. I just have a small QOL issue. I have posted in the r/Hackintosh reddit, but have not gotten a reply to this specific issue, but did for other issues I was having. I also posted at tonymacx86 and was getting replies for other issues I was having, but got banned because I said, "used VM, but didn't work" in my OP I think ...
       
      I followed a PC vanilla guide from r/Hackintosh that I found as I did not have an Apple system. One monitor connected to a GTX 1080, CPU: i7-8700, Coffee Lake. Motherboard is Alienware specific 0VDT73, with chipset Z370.
       
      The issue is every time High Sierra boots up and gets to the login screen, my keyboard and mouse do not work. I only have to reseat both and then they work the whole time until I restart. They are both plugged into USB2.0 ports. I do have Lilu, WhateverGreen, USBInjectAll, and VoodooPS2 installed in my /Library/Extensions folder using #####. Mouse and Keyboard work fine each time I boot to Clover (USB). Any ideas?
       
      Thank you!
      Working: NVIDIA using (One) DisplayPort, USB3.0 (rear), USB-C (rear), USB2.0 (rear), Audio, Ethernet
       
      EDIT: Did some more testing, and it looks like my Keyboard works fine after each reboot, the only issue is that my mouse has to continuously be reseated. Any ideas? Could it just be the mouse?It's an old Inland USB mouse: 337451
    • By MaLd0n
      ---INSTALLATION TUTORIAL---
       
      ---Original Post---
      https://olarila.com/forum/viewtopic.php?p=77102#p77102
       
      ---CLOVER FOLDER---
       
      CLOVER.zip
       
      --MOBO
      GigaByte Z390 M Gaming



      --PROCESSOR
      Intel Core i9-9900K


      --COOLER
      CoolerMaster MasterLiquid ML120R RGB


      --MEMORY
      Corsair Dominator Platinum 16GB (2 x 8GB)


      --GPU
      Sapphiretech Radeon RX 590 8 GB GDDR5


       
      --SSD
      Samsung 970 EVO NVMe M2 Flash Drive


      --POWER SUPPLY
      EVGA 750 N1, 750W


      --WIRELESS
      TP-Link Archer T9E


      --BLUETOOTH
      Orico BTA-403


      --CASE
      Thermaltake View 21 Tempered Glass Edition


      --DSDT Patches--
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 10 ID -DMAC -REMOVE 22K LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM / REAL TIME CLOCK -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--





























      --BruceX--
       
      --USB-C-- test with SanDisk Ultra USB-STICK 128gb


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
×