Jump to content

119 posts in this topic

Recommended Posts

I've got this laptop, fully working minus keyboard brightness, that's working but its not dimmable with shortcut Keys...

there is actually no way to use the latest voodooi2c when the i2c device is in ETPD and the CPU is a Kaby, tried with the help of alex.daud, driver is loading, pinning is ok, but still no movement from the trackpad...

Alex.daud said it's a problem about the Asus dsdt implementation...

Latest version working is 1.0.4

 

P.s.

I was trying to debug the Keys to remap them, but seems that the keyboard, that's usb, cannot be seen by acpidebug...

Edited by JahStories

Share this post


Link to post
Share on other sites
Advertisement

Guess I'll stick to v1.0 it worked for me but without gestures, or sys pref pane detection

@onejay09 How about the keyboard backlight does it work for you?

And could you help me with the extra brightness levels and the slider, thanks.

Share this post


Link to post
Share on other sites
17 minutes ago, M3G4DR01D said:

Guess I'll stick to v1.0 it worked for me but without gestures, or sys pref pane detection

@onejay09 How about the keyboard backlight does it work for you?

And could you help me with the extra brightness levels and the slider, thanks.

yours is working the same as my brightness levels, except i have slider,

ive tried cant be of more help

2 minutes ago, M3G4DR01D said:

Interestingly tho, my touchpad works at the clover boot menu with VoodooPS2 Touchpad ?!?!

well that shouldnt happen

did you delete appleintellpssi2c.kext

Share this post


Link to post
Share on other sites
4 minutes ago, onejay09 said:

yours is working the same as my brightness levels, except i have slider,

ive tried cant be of more help

well that shouldnt happen

did you delete appleintellpssi2c.kext

Yes

Someone had the same problem as me, but his touchpad worked when he disabled the rename _OSI to _XOSI patch

Share this post


Link to post
Share on other sites
4 minutes ago, onejay09 said:

no. i literally just told you that my setup is the same. your an ignorant muppet

haven't i helped you enough?

learn to do it for yourself like i did

Ouch sorry man, thank you for your help.

Edited by M3G4DR01D

Share this post


Link to post
Share on other sites
1 hour ago, JahStories said:

I've got this laptop, fully working minus keyboard brightness, that's working but its not dimmable with shortcut Keys...

there is actually no way to use the latest voodooi2c when the i2c device is in ETPD and the CPU is a Kaby, tried with the help of alex.daud, driver is loading, pinning is ok, but still no movement from the trackpad...

Alex.daud said it's a problem about the Asus dsdt implementation...

Latest version working is 1.0.4

 

P.s.

I was trying to debug the Keys to remap them, but seems that the keyboard, that's usb, cannot be seen by acpidebug...

@JahStories could you tell me how you got your keyboard backlight working and btw does iMessage work for you, thanks!

Edited by M3G4DR01D

Share this post


Link to post
Share on other sites
1 hour ago, M3G4DR01D said:

Yes

Someone had the same problem as me, but his touchpad worked when he disabled the rename _OSI to _XOSI patch

then add windows 10 patch and remove xosi

Share this post


Link to post
Share on other sites
18 hours ago, M3G4DR01D said:

@JahStories could you tell me how you got your keyboard backlight working and btw does iMessage work for you, thanks!

This is the keyboard backlight patch, about icloud and imessage, yes I got them working pretty well.

# Patch by EMlyDinEsH (www.osxlatitude.com)
 
#
# Enables 4 keyboard backlight levels control to work using my kexts AsusNBFnKeys and Smart Touchpad
# This patch meant for Kabylake notebooks and may work for others.
#
 
# Insert backlight auto off control sync field for Smart Touchpad and Asus Fn Keys driver
into device label ATKD code_regex Name\s\(BOFF,\sZero\) remove_matched;
into device label ATKD insert begin Name (BOFF, Zero) end;
 
# Insert method SKBL for setting keyboard backlight level
into method label SKBL parent_label ATKD remove_entry;
into Device label ATKD insert begin
Method (SKBL, 1, NotSerialized)\n
            {\n
                If (Or (LEqual (Arg0, 0xED), LEqual (Arg0, 0xFD)))\n
                {\n
                    If (And (LEqual (Arg0, 0xED), LEqual (BOFF, 0xEA)))\n
                    {\n
                        Store (Zero, Local0)\n
                        Store (Arg0, BOFF)\n
                    }\n
                    Else\n
                    {\n
                        If (And (LEqual (Arg0, 0xFD), LEqual (BOFF, 0xFA)))\n
                        {\n
                            Store (Zero, Local0)\n
                            Store (Arg0, BOFF)\n
                        }\n
                        Else\n
                        {\n
                            Return (BOFF)\n
                        }\n
                    }\n
                }\n
                Else\n
                {\n
                    If (Or (LEqual (Arg0, 0xEA), LEqual (Arg0, 0xFA)))\n
                    {\n
                        Store (Arg0, BOFF)\n
                    }\n
                    Else\n
                    {\n
Store (And (Arg0, 0x7F), KBLV)\n
                    }\n
                }\n
Store (0x0900, Local0)\n
          Add (Local0, 0xF0, Local0)\n
          \_SB.PCI0.LPCB.EC0.WRAM (Local0, KBLV)\n
         Store (DerefOf (Index (PWKB, KBLV)), Local0)\n
            \_SB.PCI0.LPCB.EC0.ST9E (0x1F, 0xFF, Local0)\n
                Return (Local0)\n
            }\n
end;
 
# Remove existing 16 backlight levels list if exist
into device label ATKD code_regex Name\s\(KBPW,\sBuffer\s\(0x10\)\s*\n\s*\{\s*\/\*\s0000\s\*\/\s*0x00,\s0x11,\s0x22,\s0x33,\s0x44,\s0x55,\s0x66,\s0x77,\s*\/\*\s0008\s\*\/\s*\s0x88,\s0x99,\s0xAA,\s0xBB,\s0xCC,\s0xDD,\s0xEE,\s0xFF\s*\}\) remove_matched;
# Remove existing 4 backlight levels list if exist
into device label ATKD code_regex Name\s\(PWKB,\sBuffer\s\(0x04\)\s*\n\s*\{\s*0x00,\s0x55,\s0xAA,\s0xFF\s*\}\) remove_matched;
 
# Insert 4 backlight levels
into Device label ATKD insert begin
Name (PWKB, Buffer (0x04)\n
            {\n
               0x00, 0x55, 0xAA, 0xFF\n
            })\n
end;
 
 
# Insert method GKBL for reading keyboard backlight level
into method label GKBL parent_label ATKD remove_entry;
into Device label ATKD insert begin
Method (GKBL, 1, NotSerialized)\n
            {\n
               If (LEqual (Arg0, 0xFF))\n
                {\n
                    Return (BOFF)\n
                }\n
 
                Return (KBLV)\n
            }\n
end;

 

Share this post


Link to post
Share on other sites
22 minutes ago, JahStories said:

This is the keyboard backlight patch, about icloud and imessage, yes I got them working pretty well.


# Patch by EMlyDinEsH (www.osxlatitude.com)
 
#
# Enables 4 keyboard backlight levels control to work using my kexts AsusNBFnKeys and Smart Touchpad
# This patch meant for Kabylake notebooks and may work for others.
#
 
# Insert backlight auto off control sync field for Smart Touchpad and Asus Fn Keys driver
into device label ATKD code_regex Name\s\(BOFF,\sZero\) remove_matched;
into device label ATKD insert begin Name (BOFF, Zero) end;
 
# Insert method SKBL for setting keyboard backlight level
into method label SKBL parent_label ATKD remove_entry;
into Device label ATKD insert begin
Method (SKBL, 1, NotSerialized)\n
            {\n
                If (Or (LEqual (Arg0, 0xED), LEqual (Arg0, 0xFD)))\n
                {\n
                    If (And (LEqual (Arg0, 0xED), LEqual (BOFF, 0xEA)))\n
                    {\n
                        Store (Zero, Local0)\n
                        Store (Arg0, BOFF)\n
                    }\n
                    Else\n
                    {\n
                        If (And (LEqual (Arg0, 0xFD), LEqual (BOFF, 0xFA)))\n
                        {\n
                            Store (Zero, Local0)\n
                            Store (Arg0, BOFF)\n
                        }\n
                        Else\n
                        {\n
                            Return (BOFF)\n
                        }\n
                    }\n
                }\n
                Else\n
                {\n
                    If (Or (LEqual (Arg0, 0xEA), LEqual (Arg0, 0xFA)))\n
                    {\n
                        Store (Arg0, BOFF)\n
                    }\n
                    Else\n
                    {\n
Store (And (Arg0, 0x7F), KBLV)\n
                    }\n
                }\n
Store (0x0900, Local0)\n
          Add (Local0, 0xF0, Local0)\n
          \_SB.PCI0.LPCB.EC0.WRAM (Local0, KBLV)\n
         Store (DerefOf (Index (PWKB, KBLV)), Local0)\n
            \_SB.PCI0.LPCB.EC0.ST9E (0x1F, 0xFF, Local0)\n
                Return (Local0)\n
            }\n
end;
 
# Remove existing 16 backlight levels list if exist
into device label ATKD code_regex Name\s\(KBPW,\sBuffer\s\(0x10\)\s*\n\s*\{\s*\/\*\s0000\s\*\/\s*0x00,\s0x11,\s0x22,\s0x33,\s0x44,\s0x55,\s0x66,\s0x77,\s*\/\*\s0008\s\*\/\s*\s0x88,\s0x99,\s0xAA,\s0xBB,\s0xCC,\s0xDD,\s0xEE,\s0xFF\s*\}\) remove_matched;
# Remove existing 4 backlight levels list if exist
into device label ATKD code_regex Name\s\(PWKB,\sBuffer\s\(0x04\)\s*\n\s*\{\s*0x00,\s0x55,\s0xAA,\s0xFF\s*\}\) remove_matched;
 
# Insert 4 backlight levels
into Device label ATKD insert begin
Name (PWKB, Buffer (0x04)\n
            {\n
               0x00, 0x55, 0xAA, 0xFF\n
            })\n
end;
 
 
# Insert method GKBL for reading keyboard backlight level
into method label GKBL parent_label ATKD remove_entry;
into Device label ATKD insert begin
Method (GKBL, 1, NotSerialized)\n
            {\n
               If (LEqual (Arg0, 0xFF))\n
                {\n
                    Return (BOFF)\n
                }\n
 
                Return (KBLV)\n
            }\n
end;

 

This patch goes in the DSDT right? Or do I need a separate SSDT for it?

And could you please tell me how you got iMessage working? I keep getting a sign in error!

Share this post


Link to post
Share on other sites
Just now, JahStories said:

Dsdt patch, for iMessage it's mostly luck, about iCloud you need to set a correct SMbios.

 Oh I already have iCloud working it's iMessage and Siri and FaceTime that are grinding my gears, they are all caused by the same issue I believe (apple detecting that my hack isn't genuine apple hardware -_-)

Share this post


Link to post
Share on other sites
On 2018-04-18 at 6:07 PM, JahStories said:

This is the keyboard backlight patch, about icloud and imessage, yes I got them working pretty well.


# Patch by EMlyDinEsH (www.osxlatitude.com)
 
#
# Enables 4 keyboard backlight levels control to work using my kexts AsusNBFnKeys and Smart Touchpad
# This patch meant for Kabylake notebooks and may work for others.
#
 
# Insert backlight auto off control sync field for Smart Touchpad and Asus Fn Keys driver
into device label ATKD code_regex Name\s\(BOFF,\sZero\) remove_matched;
into device label ATKD insert begin Name (BOFF, Zero) end;
 
# Insert method SKBL for setting keyboard backlight level
into method label SKBL parent_label ATKD remove_entry;
into Device label ATKD insert begin
Method (SKBL, 1, NotSerialized)\n
            {\n
                If (Or (LEqual (Arg0, 0xED), LEqual (Arg0, 0xFD)))\n
                {\n
                    If (And (LEqual (Arg0, 0xED), LEqual (BOFF, 0xEA)))\n
                    {\n
                        Store (Zero, Local0)\n
                        Store (Arg0, BOFF)\n
                    }\n
                    Else\n
                    {\n
                        If (And (LEqual (Arg0, 0xFD), LEqual (BOFF, 0xFA)))\n
                        {\n
                            Store (Zero, Local0)\n
                            Store (Arg0, BOFF)\n
                        }\n
                        Else\n
                        {\n
                            Return (BOFF)\n
                        }\n
                    }\n
                }\n
                Else\n
                {\n
                    If (Or (LEqual (Arg0, 0xEA), LEqual (Arg0, 0xFA)))\n
                    {\n
                        Store (Arg0, BOFF)\n
                    }\n
                    Else\n
                    {\n
Store (And (Arg0, 0x7F), KBLV)\n
                    }\n
                }\n
Store (0x0900, Local0)\n
          Add (Local0, 0xF0, Local0)\n
          \_SB.PCI0.LPCB.EC0.WRAM (Local0, KBLV)\n
         Store (DerefOf (Index (PWKB, KBLV)), Local0)\n
            \_SB.PCI0.LPCB.EC0.ST9E (0x1F, 0xFF, Local0)\n
                Return (Local0)\n
            }\n
end;
 
# Remove existing 16 backlight levels list if exist
into device label ATKD code_regex Name\s\(KBPW,\sBuffer\s\(0x10\)\s*\n\s*\{\s*\/\*\s0000\s\*\/\s*0x00,\s0x11,\s0x22,\s0x33,\s0x44,\s0x55,\s0x66,\s0x77,\s*\/\*\s0008\s\*\/\s*\s0x88,\s0x99,\s0xAA,\s0xBB,\s0xCC,\s0xDD,\s0xEE,\s0xFF\s*\}\) remove_matched;
# Remove existing 4 backlight levels list if exist
into device label ATKD code_regex Name\s\(PWKB,\sBuffer\s\(0x04\)\s*\n\s*\{\s*0x00,\s0x55,\s0xAA,\s0xFF\s*\}\) remove_matched;
 
# Insert 4 backlight levels
into Device label ATKD insert begin
Name (PWKB, Buffer (0x04)\n
            {\n
               0x00, 0x55, 0xAA, 0xFF\n
            })\n
end;
 
 
# Insert method GKBL for reading keyboard backlight level
into method label GKBL parent_label ATKD remove_entry;
into Device label ATKD insert begin
Method (GKBL, 1, NotSerialized)\n
            {\n
               If (LEqual (Arg0, 0xFF))\n
                {\n
                    Return (BOFF)\n
                }\n
 
                Return (KBLV)\n
            }\n
end;

 

Hello @JahStories Thanks to your patch my keyboard backlight now works!! but, I have no control over it (and I'm not sure which level Is it since I have 3 but its somewhat dim so I'd say level 2), is there anyway to control it using FN+F3 and FN+F4 keys? thanks!

Share this post


Link to post
Share on other sites
1 minute ago, M3G4DR01D said:

Hello @JahStories Thanks to your patch my keyboard backlight now works!! but, I have no control over it (and I'm not sure which level Is it since I have 3 but its somewhat dim so I'd say level 2), is there anyway to control it using FN+F3 and FN+F4 keys? thanks!

I'm sorry but I've not been able to control it... -.-

Share this post


Link to post
Share on other sites
On 4/17/2018 at 5:17 PM, onejay09 said:

you dont understand, ive already given them to you. the _DSM method for pci0.peg0.pegp i added for you in ssdt-8.aml

 

Hey onejay09 do you recommend any online websites that are  a good source for learning more about the daft ssdt patching prices? as how much I appreciate you helping him out, one part of me would love to know what exactly was done in the steps so I could reproduce for my own and future hacks :p

 

please let me know 

much appreciated 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Pro and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Pro, 9900k with a Vega 56 but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8700k, 9700k, 9900k
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
      There Is No Better Guide Then The One That @glasgood Has Already Written So Just Follow He's Guide For a Perfect Install.     
       
       
      HARDWARE USED
      • Intel I9 9900k 
      • Gigabyte AORUS Z390 PRO
      • Sapphire Pulse Vega 56 ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 16GB @3200mhz (2 x 8GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • Coolermaster MASTERLIQUID ML360R RGB CPU Cooler
      • Samsung 860 EVO 500GB SSD (2.5) macOS Mojave
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       
       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
       
       
      CLOVER  FOLDER
      Use this folder with fully patched DSDT
      Z390 Pro DSDT EFI.zip   (Updated 21 July 2019)
       
       
      ADDITIONAL DSDT's  (A big thanks to @MaLd0n for compiling these extra DSDT's)
      If your using a Vega 56/64 or Radion VII then use this DSDT (already installed in my EFI)
      DSDT.VEGA.VII.zip
      If your using a RX Series or Nvidia GPU then use this DSDT
      DSDT.RXxxx.NVIDIA.zip
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://olarila.com/forum/viewtopic.php?f=19&t=1131 
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      Clover
      Clover Configurator
      Kext Updater
       
       
      OPTIONAL DOWNLOADS
      AirportBrcmFixup.kext    (If your Wifi Card isn't working after installing my EFI then add the AirportBrcmFixup.kext to your clover kext folder and reboot)
      FakeSMC    (Can be used instead of VirtualSMC)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F10)
       
      • Enter BIOS → Press F12 → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • BIOS → Windows 8/10 Features → Other OS
      • BIOS → CSM Support → Disabled  
       
      • MIT → Advanced Memory Settings  → Extreme Memory Profile (X.M.P) → Enabled  
       
      • Peripherals → Initial Display Output → PCIe 1 Slot
      • Peripherals → Trusted Computing → Security Device Support →  Disable
      • Peripherals → Intel(R)Bios Guard → Intel BIOS Guard Support →  Disable
      • Peripherals → USB Configuration → Legacy USB Support →  Enabled
      • Peripherals → USB Configuration → XHCI Hand-off →  Enabled
      • Peripherals → Network Stack Configuration → Network Stack →  Disabled
      • Peripherals → SATA And RST Configuration → SATA Mode Selection →  AHCI
       
      • Chipset → Vt-d → Enabled  (can be enabled or disabled, your choice)
      • Chipset → Internal Graphics → Disabled
      • Chipset → Audio Controller → Enabled
      • Chipset → Above 4G Decoding → Disabled 
       
      • Power → Platform Power Management → Enabled
      • Power → ErP → Enabled  (can be enabled or disabled, your choice)
      • Power → RC6 (Render Standby) → Disabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS
       

       

       

       

       

       

       

       

       

       

       

       

    • By fusion71au
      Clover r5050 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r5050 for VMware.zip". Mount Clover-v2.5k-5050-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By Drovosek
      Hey. I found a repository with modified voodoops2controller kext. Finalized it sysctl and kprinssu and the-darkvoid based on the kext from RehabMan.
      https://github.com/syscl/OS-X-Voodoo-PS2-Controller
       
      This kext almost like VoodooPS2Trackpad from acidanthera.
      https://github.com/acidanthera/VoodooPS2
      https://applelife.ru/threads/acidanthera-voodoops2trackpad-dlja-synaptics.2944059/
       
      I attach the compiled version.
      https://vk.com/doc183234383_514349114

      P.S. If you try it, then naturally remove other kexts for the touchpad and keyboard and, first install via KextUtility. If it works fine, then remove it from /S/L/E and throw in /kexts/Other
      VoodooPS2Controller modified syscl.zip
      P. P. S.
      I wanted to upload this archive to the forum in the "Downloads" section to where the cupcakes are located, but I didn't see a button to create a theme there. Also I have there is no opportunity to leave comments. Why?
      It would be nice if someone moved this kext there, too.
    • By Slice
      I successfully installed macOS 10.11.6 and Windows 7 Pro SP1 in UEFI mode on the laptop.
      I know, there are detailed guides here and on osxlatitude.com but I was not agree with them and carefully check and test every step to tune my Mac.
       
      Hardware
      Intel® Core� i5-3320M CPU @ 2.60GHz, speedstep works with Clover default settings
      Chipset Intel 7 series, no patches needed
      Video: IntelHD4000 or NVS5200M switchable in BIOS, work in both cases
      LAN; Intel 82579LM, works with IntelMausiEthernet.kext v2.2.1
      Audio: IDT 92HD93BXX, works with VoodooHDA 2.9.0.
      SDHC reader O2Micro; works with native AppleSDHC.kext with Clover Arbitrary properties.
      USB3.0 works natively if not disabled in DSDT
      PS2 keyboard and touchpad works with VoodooPS2.
      WiFi: Dell Intel WiFi was replaced by Dell DW1520, Broadcom BCM943224HMS. DeviceID=4353
      LCD Screen 1366x768
      BIOS A12. Initially was A02. Then I flashed A23 and found it is quite bad. The screen is full of artefacts. Flash A12 and all is OK. Not tested other versions.
      For some reason BIOS can switched from Intel to Nvidia by itself so I have to do my solution working independent on this state.
       
      WiFi
      It is not working OOB although it has DeviceID known to Apple. The reason is WhiteList in the driver.
      I set MacModel as MacBookPro10,1 while the WiFi will work on MacBookAir. I make a patch in Clover.
      As well a patch for channels.
      I deleted a kext Brcm4331 because it has the same DeviceID. Let kext Brcm4360 to work alone.
       
      VideoCards
      In Bios we can set Optimus = Enable/Disable
      If Enable then we have two videocards Intel first and Nvidia second. In this case additional SSDT-3.aml will switch off Nvidia.
      If Disable then we have only Nvidia card. It will work if Board-ID taken from iMac13,2.
      But here there is contradiction with WiFi with required Board-ID from MacBookAir.
      So I take MacModel as MacBookPro10,1 which is most close by CPU IvyBridge.
      Set BoardID like iMac13,2 to make Nvidia working.
      Patch BoardID in Brcm4360 to make WiFi working.
      Now I have
      Inject->
      ->Intel=YES
      ->Nvidia=YES
      and SSDT-3.aml in ACPI\patched folder. This SSDT will switch off Nvidia if Intel card ON.
      For Intel graphics there is a patch against 8 apples at start.
      This Nvidia 5200 is Fermi and works in ElCapitan.
       
      Brightness
      No special kexts.
      The brightness controlled by keys F1,F2 and slider in Control Panel in both case Intel or Nvidia. Details here  #72 
       
      DSDT and SSDT
      This is very long story and finally I have working sleep in both cases Intel or Nvidia.
       
      Sensors
      I use my HWSensors3 with FakeSMC 3.5.2.
      I got monitoring:
      CPU temperature
      GPU temperature
      GPU main frequency
      GPU shader frequency
      Battery state % full, time to charged or time to empty.
      Battery voltage dinamically.
      Battery amperage dynamically. I can see it changes on heavy games.
      HDD temperature.

       
      Audio
      I like VoodooHDA and have no problems with it.
      The sound is clear, loud, and switchable between internal speaker and headphone.
      Mic is working.
       
      Bluetooth
      Just tested with BTFirmwareUpdate.kext and it works in 10.11.6. I not needed it so switched off by wireless switch at right side.
      For 10.13.6 there is other kext BRCMInjector.
       
      Keyboard, Touchpad and Touchstick
      Post #14
      I made my fork of the VoodooPS2 driver, take here sources and release version
      https://github.com/SergeySlice/VoodooPS2-for-ALPS
       
      My config, ACPI files and kexts are in attachment.
      05.12.2017
      EFI.7z
       
      EDITED:
      Better DSDT in the post #6.
      Sleep working even when AC inserted.
       
      EDITED 06.12.2018
      Now I have HighSierra and this is my EFI folder. Note, HighSierra is possible only with Intel graphics (Optimus is enabled in BIOS)
       

       
       
      Welcome to discussion!
      EFI-E6430.7z
      BRCMInjector.kext.zip
×