Jump to content
fantomas1

Apple released macOS 10.13.4 Update

29 posts in this topic

Recommended Posts

2 hours ago, ricoc90 said:

Yes. The update has 2 stages, you only went through the first stage. After the first stage the system will reboot and then will proceed the initial update process.

Got it updated! I went through the second phase after making that post, and it restarted a few times throughout the process, and the clover entry disappeared on the last boot. I had a feeling it was updated- and voila! she was!

I updated to the latest Clover r4428 and the AFPS.efi that someone posted earlier before selecting the "macOS Install" boot entry just to be safe.

Seems all good here.

Thanks!

Share this post


Link to post
Share on other sites
Advertisement

I am running 13.4 and got an update notice or a security update (2018-1) and it want complete.

I initiate the update via the App Store/Updater and it downloads and asks for a restart.

I restart and on the way down it "updates system"

At Clover I have 3 volumes Boot from installer, Boot from MacOS and Recovery (names are approximate)

I select boot from installer and it launches the installer which eventually shows screen with the message that the update could not be applied to this Mac because the update resources could not be found. 

 

Any suggestions? 

TIA


Frank

 

Share this post


Link to post
Share on other sites

I am running 13.4/clover 4497 and got an update notice or a security update (2018-1) and it want complete.

I initiate the update via the App Store/Updater and it downloads and asks for a restart.

I restart and on the way down it "updates system"

At Clover I have 3 volumes Boot from installer, Boot from MacOS and Recovery (names are approximate)

I select boot from installer and it launches the installer which eventually shows screen with the message that the update could not be applied to this Mac because the update resources could not be found. 

 

Any suggestions? 

TIA


Frank

 

I am running 13.4/clover 4497 and got an update notice or a security update (2018-1) and it want complete.

I initiate the update via the App Store/Updater and it downloads and asks for a restart.

I restart and on the way down it "updates system"

At Clover I have 3 volumes Boot from installer, Boot from MacOS and Recovery (names are approximate)

I select boot from installer and it launches the installer which eventually shows screen with the message that the update could not be applied to this Mac because the update resources could not be found. 

 

Any suggestions? 

TIA


Frank

 

I am running 13.4/clover 4497 and got an update notice or a security update (2018-1) and it want complete.

I initiate the update via the App Store/Updater and it downloads and asks for a restart.

I restart and on the way down it "updates system"

At Clover I have 3 volumes Boot from installer, Boot from MacOS and Recovery (names are approximate)

I select boot from installer and it launches the installer which eventually shows screen with the message that the update could not be applied to this Mac because the update resources could not be found. 

 

Any suggestions? 

TIA


Frank

 

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By WarDoc
      This Post is for helping users with issue that come with Whatevergreen

      Feel free to join in and help users if you know your stuff
      also get the dev's of whatever green to join as well


      Whatevergreen has a few issues

      Multi-monitor Support is lacking as 2 monitors seems to be the limit for some even if the devs say it's not users say it's true

      Some Id's are wrong or missing (hence the nano and 390X not working)

      some GPU names are wrong ( which has been reported many times)

      FOR RYZEN OWNERS with Polaris :
      Modified kext:/S/L/E/AMD9510Controller.kext//Contents/Info.plistfrom:<key>IOPCIMatch</key><string>0x67EF1002</string>to:<key>IOPCIMatch</key><string>0x67FF1002</string> Updating clover to Clover_v2.4k_r4152 and using the config.plist here https://pastebin.com/TYiTEVcMwithbusratio=36 and npci=0x3000 ALSO THIS THREAD IS NOT FOR WHINING in anyway please do not post off topic if you don't like given support in this forum that's all you but majority of use need it.
       
      Source code: repository. FAQ and documentation: link.  
      a real SSDT example https://www.dropbox.com/sh/el66izg1lmk1jiu/AADCZUEjyQyiWWELlmzW2ix-a?dl=0 Credits to Pavo for the hard work of decoding the mess
      Boot argumentsAdd -raddbg to enable debug printing (available in DEBUG binaries).Add -radvesa to disable ATI/AMD video acceleration completely.Add -radoff to disable WhateverGreen.Add -radbeta to enable WhateverGreen on unsupported os versions (10.13 and below are enabled by default).Add -rad24 to enforce 24-bit display mode.Add -radlogo to patch boot logo distortion.Add -raddvi to enable DVI transmitter correction (required for 290X, 370, etc.)Add radpg=15 to disable several power-gating modes (see FAQ, required for 7xxx GPUs). If you Don't Want To use WEG or LILU clover 4297 has a new patch that fixes the same issues without kexts 
      You have to set in config.plist <key>Graphics</key> <dict> <key>RadeonDeInit</key> <true/>
    • By Thereman
      Hello, I'm a noob at installing MacOS on my current PC (which is running Windows 10 x64 Pro).
      Can I do a dual boot with windows 10 and MacOS Mojave? I already have windows 10 installed and I would like to put and MacOS Mojave, can it? If not, should I reinstall from 0 MacOS Mojave and after Windows 10?
       
      P.S: I have already make a topic about "Can I run MacOS" and the export boys on the forum said to me I can run it.
    • By Teress
      Hello everybody, I’ve got a lot of request and complains from a lot of hackintosh users that they can’t get their iMessage working. So I decided to make a 100% working a STEP by STEP tutorial under 4 minutes HOW TO GET IMESSAGE AND OTHER ICLOUD SERVICE WORKING ON ANY HACKINTOSH. Enjoy it.
    • By MaLd0n
      Now have a Olarila Folders app, just download app and clover folder for your Chipset! Download Folders.app     Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover UEFI in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install Sierra and boot into system!   --Install Clover UEFI and replace with my folder  CLOVER POST INSTALLATION.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches!   If you need DSDT edit... Run it RunMe.app   --DSDT My DSDT DSDT.ASUS H61M-A MaLd0n.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -EHCx -LPC -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -PNLF Clear NVRAM, Purge and Kextcache
          --FakeSMC http://www.hwsensors.com/releases --Audio https://github.com/vit9696/AppleALC --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    • By MaLd0n
      Now have a Olarila Folders app, just download app and clover folder for your Chipset! Download Folders.app     --Create a bootable copy of macOS Sierra   http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra   http://diskmakerx.com/   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder    CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder   CLOVER.zip   --Nvidia WebDriver Sierra   http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/   --Nvidia WebDriver High Sierra   http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/   --Cuda   http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   Now you need a fine tune!   --DSDT DSDT.GA H97M-D3H MaLd0n.zip Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -EHCx -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -PNLF --Power Management   Use "plugin-type"=1 in DSDT, SSDT or Clover config.plist   --Brightness   Install .app, select the required permission and reboot. Work in F1 / F2 keys! NativeDisplayBrightness.app.zip https://github.com/Bensge/NativeDisplayBrightness/releases *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install  
      --FakeSMC
        https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek/downloads/   --Audio   https://github.com/vit9696/AppleALC   --USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   --LAN   http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!
×