Jump to content
  1. TwEnTy90

    TwEnTy90

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By chummdoggin
      A setup with an IVY bridge e5430 dell worked fine. but now seems the XHC device
      is a hardware issue. There is no bios setting to enable disable. Only enable/disable boot/external.USB in general.
      All set to enable. Also just mention of USB in power settings wake on USB.
       
      Did show up when I set up the ports w/USBINJECTALL, then was working on imessage isssue when the DSDT
      stopped loading after updating clover. I had two versions of MAcIasl. One with iasl 6. and one had 6.2a. Kept
      the 6.2a, was RM's most recent. One problem Im confused by is it compiles fine but after saved if its opened,
      the error that was repaired comes back.
       
      This part:
       
                      If (LEqual (PM6H, One))
                      {
                          CreateBitField (BUF0, \_SB.PCI0._Y0C._RW, ECRW)  // _RW_: Read-Write Status
                          Store (Zero, ECRW (If (PM0H)
                                  {
                                      CreateDWordField (BUF0, \_SB.PCI0._Y0D._LEN, F0LN)  // _LEN: Length
                                      Store (Zero, F0LN)
                                  }))
                      }
       
      Loads with the error but not sure what happened on the original that worked.
       
      Any Idea?
       
      Going over the boot log, The XHC device is there under the PCI readings dont think hardware issue... 1e31 Just seems the saved DSDT should not
      have errors after saved, but using the other version of Maciasl, the DSDT would save without errors and open without but it would not load.
      acted like there was no FakeSMC... 
       
      Edit: Seems all the saved DSDT have that error when re-opened using that version  RM's Maciasl w/iasl v.6.2a but seems to load fine.

       
      debug_8785.zip
    • By susteve
      Hello, I am new here, so I apologize if I've chosen the wrong subforum for this question. 
       
      I am scratching my head a bit on an issue with a clients MacBook pro.  He was having USB connection issues and claimed the laptop wasn't detecting any USB connected to it. 
       
      Figuring it was a failed USB port, I took it in but ended up just feeling more confused after doing some diagnostics. 
       
      It came in loaded with Catalina, a recent upgrade spurned the beginning of the issues the client told me. 
       
      I decided to revert it back to the default OS in the base recovery image, which is Yosemite. 
       
      Upon finishing the install, I found that the USB port was in fact working again. Figuring I had resolved the issue, I updated it back to Catalina just to be met with the same issue upon reinstalling. 
       
      SMH 
       
      Tried nvram, pram, and smc reset each to no avail.  
       
      One thing to note is that during boot, the USB is getting power as it lights up when connected during boot up. 
       
      But the ports are dead as soon as it boots into the operating system. 
       
      I have a strong feeling that this is a driver issue. I tried unloading and reloading the USB IO kext, with no noticable change. 
       
      Is anyone here familiar with this issue? Would there be any other kext related troubleshooting i can perform ? Is it possible to revert to the kext used in Yosemite on catalina ?
       
      One last thing to note, on Yosemite the USB was functioning 100%. But I did get a strange notification that the USB ports were using power even when there wasn't any connected to it. Either way, I find it very very odd that it works perfectly in Yosemite. 
       
      Thanks in advance
       
      Steve 
    • By jdorz
      Hello all,

      I have successfully gotten my Hackintosh working 99 percent. The remaining issue that I am running into is that my system will randomly kernel panic upon a user issued shutdown or reboot WHEN I have either a usb sound card or usb headset plugged into any of my USB ports (both 2.0 and 3.0). If I remove the headset, it will power down with no issues. Does anyone have any suggestions?

      My system is as follows:
      MacOS 10.14 Mojave
      Gigabyte H370 HD3
      8400 i5 Coffee Lake
      Radeon RX 580 sound card

      Fixed
       
      Solution
       
      Use this folder for serie 100/200/300
      https://olarila.com/forum/viewtopic.php?f=28&t=8222
       
      reboot and extract one send_me for full dsdt patch by MaLd0n
      --Run_Me
      RunMe.app
       
       
       
    • By guira
      Hey all, im new in Hackintosh world, I managed to install macOS Mojave in ASUS laptop x555LA, WIFI,HDMI,INTEL graphics, touchpad, laptop keyboard, ethernet, sound( barely, have to change it every time i run the laptop) is WORKING (after to much hours :D), also clover starts well without USB connected.
      Now my problem is that in clover, USB mouse and USB keyboard works perfectly but when MacOS load, don't know why, they stop working(just touchpad and lap keyboard working), I tried all to repair this but I can't, anyone can help me? also brightness not working but not a problem, just want USB keyboard and USB mouse working.
      AH and sorry for my English, im trying my best :D.
      btw, USB mouse and keyboard worked  when installing Mojave, but never worked in desktop or in login.
      Thanks so much , if u need more info I will be here!
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://olarila.com/forum/viewtopic.php?f=28&t=10578
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
×