Jump to content
bilbo

[Guide 2018] Z820 - SIERRA, The great guide (Sucess)

197 posts in this topic

Recommended Posts

Advertisement

So, I copied SSDT-1.aml content (from SCOPE to the end) into DSDT.aml,

and then I could generate SSDT:

_____________________________________________________________________________________

ssdtPRGen.sh v0.9  Copyright (c) 2011-2012 by † RevoGirl

             v6.6  Copyright (c) 2013 by † Jeroen

             v21.5 Copyright (c) 2013-2018 by Pike R. Alpha

-----------------------------------------------------------

Bugs > https://github.com/Piker-Alpha/ssdtPRGen.sh/issues <

./ssdtPRGen.sh: line 3877: /Users/oliveg/Library/ssdtPRGen/Data/Versions.cfg: No such file or directory

 

System information: Mac OS X 10.12.6 (16G1212)

Brandstring: "Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz"

 

Override value: (-cpus) number of processors, now using: 2!

Override value: (-p) processor model, now using: E5-2670!

Override value: (-x) XCPM mode, now set to: 1!

Override value: (-target) CPU, now using: Sandy Bridge!

Override value: (-turbo) maximum (turbo) frequency, now using: 3300 MHz!

Override value: (-c) CPU workarounds, now set to: 3!

Override value: CPU type changed, now using: Ivy Bridge!

 

Notice: Downloading extractACPITables.zip ...

Notice: Downloading User Defined.cfg ...

Notice: Downloading Sandy Bridge.cfg ...

Version: models.cfg v171 / Sandy Bridge.cfg v150

 

 

 

Scope (_SB) {19352 bytes} with ACPI Processor declarations found in DSDT (ACPI 1.0 compliant)

Notice: Downloading Restrictions.cfg ...

Generating ssdt.dsl for a 'MacPro6,1' with board-id [Mac-F60DEB81FF30ACF6]

Ivy Bridge Core E5-2670 processor [0x206D7] setup [0x]

With a maximum TDP of 115 Watt, as specified by Intel

Number logical CPU's: 32 (Core Frequency: 2600 MHz)

Number of Turbo States: 7 (2700-3300 MHz)

Number of P-States: 22 (1200-3300 MHz)

 

 

Warning: You must use the -xcpm_ipi boot argument instead of -xcpm on multiprocessor systems.

 

 

 

Injected C-States for C000 (C1,C3,C6)

Injected C-States for C001 (C1,C3,C6)

Warning: 'cpu-type' may be set improperly (0x instead of 0x0a)

- Clover users should read https://clover-wiki.zetam.org/Configuration/CPU#cpu_typeWarning: 'system-type' may be set improperly (1 instead of 3)

- Clover users should read https://clover-wiki.zetam.org/Configuration/ACPI#acpi_smartupsNotice: Downloading iasl.zip ...

 

Compiling: ssdt_pr.dsl

Intel ACPI Component Architecture

ASL Optimizing Compiler version 20140926-64 [Nov  6 2014]

Copyright (c) 2000 - 2014 Intel Corporation

 

ASL Input:     /Users/oliveg/Library/ssdtPRGen/ssdt.dsl - 417 lines, 11678 bytes, 122 keywords

AML Output:    /Users/oliveg/Library/ssdtPRGen/ssdt.aml - 2921 bytes, 52 named objects, 70 executable opcodes

 

Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 0 Optimizations

Do you want to open ssdt.dsl (y/n)? n

mac-pro-de-olivier-1:~ oliveg$

_____________________________________________________________________________________

During reboot, I saw something about ACPI... successful.

I tested with Geekbench: 2548 single-core and 19615 multi-core (?), which is better than before (1800)

How could I check if everything is 100% working?

And what about the 3 warning messages above:

"Warning: You must use the -xcpm_ipi boot argument instead of -xcpm on multiprocessor systems."?

"Warning: 'system-type' may be set improperly (1 instead of 3)"?

"Warning: 'cpu-type' may be set improperly (0x instead of 0x0a)"?

EDIT: multiple KPs on startup...

Thank you so much!!! :)

Olivier

Edited by oliveg

Share this post


Link to post
Share on other sites

Guide updated . See the log to see the changes, including the fix for "No need to copy SSDT code to DSDT" error.

btw, the guide was mess also after the update of the forums. :rolleyes:

Share this post


Link to post
Share on other sites

Thank you bilbo! I made a new DSDT and SSDT with your guide.

But I have many kps on startup... But finally it boots.

:)

Share this post


Link to post
Share on other sites
19 hours ago, oliveg said:

How could I check if everything is 100% working?

And what about the 3 warning messages above:

"Warning: You must use the -xcpm_ipi boot argument instead of -xcpm on multiprocessor systems."?

"Warning: 'system-type' may be set improperly (1 instead of 3)"?

"Warning: 'cpu-type' may be set improperly (0x instead of 0x0a)"?

 

 

About warnings messages, all of them are covered in the guide. you can set appropriately clover to follow the advice of the warnings.

 

To check the pm, you'll have to compare to the results of the other users. Check your own scores with and without PM to see the improve , and check clock freqs with hardware monitor to see the behavior. Anyway, "this is what it is". I mean, once you have the PM working, there is no more things to do (in my experience)  :|. (and I have tried to do a lot, sure)

 

No idea about your KP without more details. Keep in mind that the guide is for Z820. Maybe Z620 needs special settings. (Just in case, no need to say that you shouldn't use the dsdt patched included in the stuff folder. Extract your own bios tables and patch them)

Edited by bilbo

Share this post


Link to post
Share on other sites

OK bilbo, thank you very much for your precious help.

It is a hard way to knowledge, but thanks to the others we learn a lot!

With HW monitor, I just can see HDD T°, no CPU activity...

(I am using my tables don't worry. Concerning KP's, it is scrolling so fast that I can't read everything.

In fact, sometimes it can generate C states, sometimes not... Odd behavior! Another thing: countdown during Clover is very low, about 3 seconds for 1.)

:)

Share this post


Link to post
Share on other sites

Hello, has anyone tried high sierra ? I have Z820 with GTX 1070 and it works worse on sierra, i would like to try 10.13 but is it possible ?

(I mainly use Apps that utilize GPU to work, like Davinci Resolve)

Thanks.

Share this post


Link to post
Share on other sites

Hello,

Now have working HP Z620. 

Have 1 error on every reboot.

Anonymous UUID:       2EDC61B9-D1E5-C428-70F7-2553E2C5B339

Sun Mar 25 07:47:15 2018

*** Panic Report ***
panic(cpu 0 caller 0xffffff8000a6580c): "Razer DeathStalker[0x1000003c2]::terminate(kIOServiceSynchronous) timeout\n"@/BuildRoot/Library/Caches/com.apple.xbs/Sources/xnu/xnu-4570.41.2/iokit/Kernel/IOService.cpp:2289
Backtrace (CPU 0), Frame : Return Address
0xffffffa3d08e3960 : 0xffffff800044f606 
0xffffffa3d08e39b0 : 0xffffff800057c654 
0xffffffa3d08e39f0 : 0xffffff800056e149 
0xffffffa3d08e3a70 : 0xffffff8000401120 
0xffffffa3d08e3a90 : 0xffffff800044f03c 
0xffffffa3d08e3bc0 : 0xffffff800044edbc 
0xffffffa3d08e3c20 : 0xffffff8000a6580c 
0xffffffa3d08e3c70 : 0xffffff8000a692b7 
0xffffffa3d08e3cf0 : 0xffffff7f8125e808 
0xffffffa3d08e3d10 : 0xffffff7f81afcf2b 
0xffffffa3d08e3d50 : 0xffffff7f81afc908 
0xffffffa3d08e3db0 : 0xffffff7f81af1d8b 
0xffffffa3d08e3df0 : 0xffffff7f81af4a8d 
0xffffffa3d08e3e40 : 0xffffff8000a76315 
0xffffffa3d08e3eb0 : 0xffffff8000a760ba 
0xffffffa3d08e3ed0 : 0xffffff8000488ec4 
0xffffffa3d08e3f40 : 0xffffff80004889b5 
0xffffffa3d08e3fa0 : 0xffffff80004004f7 
      Kernel Extensions in backtrace:
         com.apple.iokit.IOUSBFamily(900.4.1)[FD04D3BC-D376-36FD-924C-DD5DF51B0509]@0xffffff7f81221000->0xffffff7f812cdfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[8E6C654E-4A8F-3C6B-BBFE-BA8A68C9C146]@0xffffff7f80c94000
            dependency: com.apple.iokit.IOUSBHostFamily(1.2)[8398A8CC-6560-38E5-B061-C4EEB6B2E1D9]@0xffffff7f81178000
            dependency: com.apple.driver.usb.AppleUSBCommon(1.0)[E768F6C8-F7ED-3AA5-AB26-03284841965E]@0xffffff7f81170000
         com.apple.driver.AppleUSBLegacyHub(900.4.1)[6D278A06-950F-35C6-B3E4-445F4BBD7DB9]@0xffffff7f81aef000->0xffffff7f81b07fff
            dependency: com.apple.iokit.IOUSBFamily(900.4.1)[FD04D3BC-D376-36FD-924C-DD5DF51B0509]@0xffffff7f81221000

BSD process name corresponding to current thread: kernel_task
Boot args: -v npci=0x2000  slide=0 

Mac OS version:
17D47

Kernel version:
Darwin Kernel Version 17.4.0: Sun Dec 17 09:19:54 PST 2017; root:xnu-4570.41.2~1/RELEASE_X86_64
Kernel UUID: 18D901F1-4A03-3FF1-AE34-C26B2732F13C
__HIB  text base: 0xffffff8000100000
System model name: MacPro4,1 (Mac-F221BEC8)

System uptime in nanoseconds: 2282342279845
last loaded kext at 517294913755: com.apple.macos.driver.AppleUSBEthernetHost    8.1.1 (addr 0xffffff7f85695000, size 49152)
last unloaded kext at 752910253251: com.apple.driver.usb.AppleUSBXHCI    1.2 (addr 0xffffff7f81488000, size 335872)
loaded kexts:
com.mtk.driver.mXHCD    1.0.0
org.hwsensors.driver.GPUSensors    1394
com.insanelymac.IntelMausiEthernet    2.3.0
org.hwsensors.driver.CPUSensors    1394
org.tw.CodecCommander    2.6.1
org.netkas.driver.FakeSMC    1394
com.rehabman.driver.USBInjectAll    0.5.17
as.vit9696.WhateverGreen    1.1.6
as.vit9696.Lilu    1.2.2
com.apple.filesystems.msdosfs    1.10
com.apple.driver.AudioAUUC    1.70
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AppleUpstreamUserClient    3.6.4
com.apple.kext.AMDFramebuffer    1.6.0
com.apple.filesystems.autofs    3.0
com.apple.kext.AMDRadeonX4250    1.6.0
com.apple.AGDCPluginDisplayMetrics    3.16.2
com.apple.driver.AppleHV    1
com.apple.iokit.IOUserEthernet    1.0.1
com.apple.iokit.IOBluetoothSerialManager    6.0.2f2
com.apple.driver.pmtelemetry    1
com.apple.kext.AMD9500Controller    1.6.0
com.apple.driver.AppleTyMCEDriver    1.0.3d2
com.apple.driver.AGPM    110.23.30
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleHDA    280.12
com.apple.driver.eficheck    1
com.apple.driver.AppleBacklight    170.10.2
com.apple.driver.AppleLPC    3.1
com.apple.driver.AppleOSXWatchdog    1
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.AppleIntelSlowAdaptiveClocking    4.0.0
com.apple.driver.AppleMCCSControl    1.5.3
com.apple.driver.AppleUSBLegacyHub    900.4.1
com.apple.filesystems.apfs    748.41.3
com.apple.filesystems.hfs.kext    407.30.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.BootCache    40
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0
com.apple.driver.AppleFWOHCI    5.5.8
com.apple.driver.AppleAHCIPort    329
com.apple.driver.AppleIntelCPUPowerManagementClient    220.0.0
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleACPIButtons    6.1
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleAPIC    1.7
com.apple.nke.applicationfirewall    183
com.apple.security.TMSafetyNet    8
com.apple.security.quarantine    3
com.apple.IOBufferCopyEngineTest    1
com.apple.driver.AppleIntelCPUPowerManagement    220.0.0
com.apple.kext.triggers    1.0
com.apple.kext.AMDRadeonX4000HWLibs    1.0
com.apple.driver.AppleSSE    1.0
com.apple.iokit.IOAcceleratorFamily2    376.6
com.apple.iokit.IOSurface    209.2.2
com.apple.iokit.IOBluetoothFamily    6.0.2f2
com.apple.driver.DspFuncLib    280.12
com.apple.kext.OSvKernDSPLib    526
com.apple.kext.AMDSupport    1.6.0
com.apple.AppleGPUWrangler    3.16.2
com.apple.AppleGraphicsDeviceControl    3.16.21
com.apple.driver.AppleBacklightExpert    1.1.0
com.apple.iokit.IOUSBMassStorageClass    4.0.4
com.apple.iokit.IONDRVSupport    517.22
com.apple.driver.AppleHDAController    280.12
com.apple.iokit.IOHDAFamily    280.12
com.apple.iokit.IOUSBHIDDriver    900.4.1
com.apple.driver.AppleUSBComposite    900.4.1
com.apple.driver.Apple16X50Serial    3.2
com.apple.iokit.IOSerialFamily    11
com.apple.driver.AppleSMBusPCI    1.0.14d1
com.apple.iokit.IOFireWireIP    2.2.8
com.apple.kext.AMDRadeonX4000HWServices    1.6.0
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.IOPlatformPluginFamily    6.0.0d8
com.apple.iokit.IOSlowAdaptiveClockingFamily    1.0.0
com.apple.driver.AppleSMBusController    1.0.18d1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.iokit.IOGraphicsFamily    517.22
com.apple.iokit.IOAHCIBlockStorage    301.40.2
com.apple.filesystems.hfs.encodings.kext    1
com.apple.driver.usb.AppleUSBHostPacketFilter    1.0
com.apple.iokit.IOFireWireFamily    4.6.8
com.apple.iokit.IOUSBFamily    900.4.1
com.apple.iokit.IOAHCIFamily    288
com.apple.driver.usb.AppleUSBEHCIPCI    1.2
com.apple.driver.usb.AppleUSBEHCI    1.2
com.apple.driver.AppleEFINVRAM    2.1
com.apple.driver.AppleEFIRuntime    2.1
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.security.sandbox    300.0
com.apple.kext.AppleMatch    1.0.0d1
com.apple.iokit.IOAudioFamily    206.5
com.apple.vecLib.kext    1.2.0
com.apple.iokit.IOBufferCopyEngineFamily    1
com.apple.driver.DiskImages    480.30.2
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleEffaceableStorage    1.0
com.apple.driver.AppleKeyStore    2
com.apple.driver.AppleUSBTDM    439.30.4
com.apple.driver.AppleMobileFileIntegrity    1.0.5
com.apple.iokit.IOUSBMassStorageDriver    140.30.1
com.apple.iokit.IOSCSIBlockCommandsDevice    404.30.2
com.apple.iokit.IOSCSIArchitectureModelFamily    404.30.2
com.apple.iokit.IOStorageFamily    2.1
com.apple.driver.AppleCredentialManager    1.0
com.apple.driver.KernelRelayHost    1
com.apple.iokit.IOUSBHostFamily    1.2
com.apple.driver.usb.AppleUSBCommon    1.0
com.apple.driver.AppleBusPowerController    1.0
com.apple.driver.AppleSEPManager    1.0.1
com.apple.driver.IOSlaveProcessor    1
com.apple.iokit.IOTimeSyncFamily    650.5
com.apple.iokit.IONetworkingFamily    3.4
com.apple.iokit.IOReportFamily    31
com.apple.driver.AppleACPIPlatform    6.1
com.apple.driver.AppleSMCRTC    1.0
com.apple.driver.AppleSMC    3.1.9
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.pthread    1
com.apple.kec.Libm    1
com.apple.kec.corecrypto    1.0

EOF

How fix this?

Thanks!

Share this post


Link to post
Share on other sites

Dear Bilbo,

Thank you for the wonderful guide again!

I have used your previous El Capitan guide for Sierra and this guide for High Sierra successfully on my Z620 like some others.

There are a few things Z620 (and Z420) hackintoshers have to tweak and to be aware of before successful High Sierra installation.

Bilbo, I would like to contribute to your guide on the AMD graphic card section for those who want to experience the native graphics acceleration from MacOS instead of the sub-standard nVidia Web drivers on nVidia cards.  Please feel free to use all the information here.

I have had a chance to compare graphics acceleration on Sierra from a GTX1080Ti with nVidia Web drivers and a Radeon Pro WX 7100 with native MacOS drivers.  I must say, High Sierra with the Radeon Pro makes the Z620 feel like a real Mac Pro 2013!

My Z620 hardware :

Motherboard : V2 on 3.91 firmware

CPU : Single E5-2690 (V1)

RAM : 32GB (1866Mhz from from a Mac Pro)

Graphics : Single AMD Radeon Pro WX 7100

Wireless : An original MacBook Pro 2012 retina wifi/bluetooth card on a PCIe adaptor (works natively on MacOS and with AirPods etc.).

Thunderbolt : HP Thunderbolt 2 adaptor card installed on default Slot 3 (works natively on MacOS although not showing on System report)

Software used :

MacOS : 10.13.3

Clover : 4428

Clover configurator : 4.61.0.0

kext wizard : 3.7.11

My motivation :

As an experimentation on the current stability of High Sierra on Z620 with Clover to determine if it is ready for production or as a daily use OS.  Also, the Radeon Pro WX7100's native MacOS drivers on Sierra does not support audio over Display Port.

Procedures in relation to Bilbo's Z820 guide (for the Z420/Z620 on High Sierra with AMD graphics) :

1. Part 1 : Bios setup. In addition to Bilbo's instructions about BIOS configuration, on both Z420 and Z620 (based on the same motherboard), you need to Set ACPI CPU tables to Legacy. This is to enable boot from High Sierra installer.

2. Part 2 : Installation, Media creation, Configure Clover, Config.plist. You need to enable RadeonDeInit under Graphics.  This is to prevent black screen upon first boot.

3. Part 2 : Installation, Media creation, kexts.  Insert kexts in 10.13 instead of 10.12.  In addition to Bilbo's kext files, you need to include whatevergreen.kext and remove NvidiaGraphicsFixup.kext.  Remember to download the latest lilu.kext too.

4. During install. Follow the instructions to prevent APFS conversion during High Sierra install. I have made many attempts with default APFS High Sierra install but Clover cannot be installed in the boot partition and EFI becomes invisible on the boot partition. Installing High Sierra with HPFS+ is the only workaround I know until Clover can support APFS.

5. Before first boot. Delete AMDRadeonX4250.kext from /System/Library/Extensions to allow boot into desktop without black screen for wx7100.  I booted into my old Sierra to delete the file.  But you can use the following instructions to boot using safe mode (-x) to delete the file and patch the other kext while you're at it too.

6. After setting up High Sierra and boot to desktop, restore the deleted kext and use Kext Wizard (or others) to repair permissions and rebuild cache.  Reboot to enjoy accelerated graphics with audio via DP immediately!

7. Part 3 : First boot.  Do not try to upgrade to 10.13.4 as it has failed (at least for me).  Just use it at 10.13.3 until Clover and other patches are updated to allow the updates.

8. Part 3 : First boot, Install Clover. Install the latest Clover and replace Bilbo's patched DSDT before you reboot.  This is to prevent automatic sudden reboot after 1 minute (very annoying).  Make sure all the kexts match the ones from the EFI on your USB install drive.

Note (for those who install High Sierra on APFS) :

Copy apfs.efi file from /usr/standalone/i386/ into the drivers64UEFI folder in the EFI partition created by clover.  This is to allow Clover access to the apfs partition.

That's it. I did not perform any further patches or fine tuning as I am just experimenting.  But you can go the whole nine yards and follow Bilbo's instructions for PM etc. and update this thread.  The fresh High Sierra is very stable as-is at this point.  I think this can be a daily use OS but may not be fast enough (CinebenchR15 only 34fps for OpenGL) or safe enough for production use until Clover is improved to support High Sierra on APFS.

Enjoy!

Share this post


Link to post
Share on other sites
On 4/13/2018 at 1:05 PM, asiansurf said:

Dear Bilbo,

Thank you for the wonderful guide again!

I have used your previous El Capitan guide for Sierra and this guide for High Sierra successfully on my Z620 like some others.

There are a few things Z620 (and Z420) hackintoshers have to tweak and to be aware of before successful High Sierra installation.

Bilbo, I would like to contribute to your guide on the AMD graphic card section for those who want to experience the native graphics acceleration from MacOS instead of the sub-standard nVidia Web drivers on nVidia cards.  Please feel free to use all the information here.

I have had a chance to compare graphics acceleration on Sierra from a GTX1080Ti with nVidia Web drivers and a Radeon Pro WX 7100 with native MacOS drivers.  I must say, High Sierra with the Radeon Pro makes the Z620 feel like a real Mac Pro 2013!

My Z620 hardware :

Motherboard : V2 on 3.91 firmware

CPU : Single E5-2690 (V1)

RAM : 32GB (1866Mhz from from a Mac Pro)

Graphics : Single AMD Radeon Pro WX 7100

Wireless : An original MacBook Pro 2012 retina wifi/bluetooth card on a PCIe adaptor (works natively on MacOS and with AirPods etc.).

Thunderbolt : HP Thunderbolt 2 adaptor card installed on default Slot 3 (works natively on MacOS although not showing on System report)

Software used :

MacOS : 10.13.3

Clover : 4428

Clover configurator : 4.61.0.0

kext wizard : 3.7.11

My motivation :

As an experimentation on the current stability of High Sierra on Z620 with Clover to determine if it is ready for production or as a daily use OS.  Also, the Radeon Pro WX7100's native MacOS drivers on Sierra does not support audio over Display Port.

Procedures in relation to Bilbo's Z820 guide (for the Z420/Z620 on High Sierra with AMD graphics) :

1. Part 1 : Bios setup. In addition to Bilbo's instructions about BIOS configuration, on both Z420 and Z620 (based on the same motherboard), you need to Set ACPI CPU tables to Legacy. This is to enable boot from High Sierra installer.

2. Part 2 : Installation, Media creation, Configure Clover, Config.plist. You need to enable RadeonDeInit under Graphics.  This is to prevent black screen upon first boot.

3. Part 2 : Installation, Media creation, kexts.  Insert kexts in 10.13 instead of 10.12.  In addition to Bilbo's kext files, you need to include whatevergreen.kext and remove NvidiaGraphicsFixup.kext.  Remember to download the latest lilu.kext too.

4. During install. Follow the instructions to prevent APFS conversion during High Sierra install. I have made many attempts with default APFS High Sierra install but Clover cannot be installed in the boot partition and EFI becomes invisible on the boot partition. Installing High Sierra with HPFS+ is the only workaround I know until Clover can support APFS.

5. Before first boot. Delete AMDRadeonX4250.kext from /System/Library/Extensions to allow boot into desktop without black screen for wx7100.  I booted into my old Sierra to delete the file.  But you can use the following instructions to boot using safe mode (-x) to delete the file and patch the other kext while you're at it too.

6. After setting up High Sierra and boot to desktop, restore the deleted kext and use Kext Wizard (or others) to repair permissions and rebuild cache.  Reboot to enjoy accelerated graphics with audio via DP immediately!

7. Part 3 : First boot.  Do not try to upgrade to 10.13.4 as it has failed (at least for me).  Just use it at 10.13.3 until Clover and other patches are updated to allow the updates.

8. Part 3 : First boot, Install Clover. Install the latest Clover and replace Bilbo's patched DSDT before you reboot.  This is to prevent automatic sudden reboot after 1 minute (very annoying).  Make sure all the kexts match the ones from the EFI on your USB install drive.

Note (for those who install High Sierra on APFS) :

Copy apfs.efi file from /usr/standalone/i386/ into the drivers64UEFI folder in the EFI partition created by clover.  This is to allow Clover access to the apfs partition.

That's it. I did not perform any further patches or fine tuning as I am just experimenting.  But you can go the whole nine yards and follow Bilbo's instructions for PM etc. and update this thread.  The fresh High Sierra is very stable as-is at this point.  I think this can be a daily use OS but may not be fast enough (CinebenchR15 only 34fps for OpenGL) or safe enough for production use until Clover is improved to support High Sierra on APFS.

Enjoy!

Hello, what about USB3? I have Z620 but have errors only with USB.

Share this post


Link to post
Share on other sites

Thanks to many here, especially @bilbo and @asiansurf. I have an *almost* working Sierra z620 with v3.92 bios on a v2 motherboard with dual E5-2680v2 CPUs. I have a GTX 980ti graphics card.

I created the USB installer and I made some updates using the old version of this guide - the El Capitan which had some supplemental instructions for Sierra. I then used that to install and everything worked OK. I then followed the steps in this guide (though it has been modified a little since then). Powersaving mode causes a problem with USB devices not appearing after I wake the computer, so I have disabled power saving mode. Also, USB3 ports don't work after about half-way through the boot process. Finally, the performance is slower than in Windows. Cinebench (Windows): 2665, (Sierra):  2355. On a positive note, the computer is super quiet in Sierra!

I then went through the updated instructions and tried to re-do the parts that were pertinent. I patched my own DSDT using the instructions but didn't see any change. I patched the SSDT and also didn't see a change. So I tried replacing my kexts with those in the 6 folder. I also diff'd the config and kept my smbios parameters but otherwise used bilbo's config. I also took his DSDT and the SSDT for my CPU.

Now when I boot I get a kp every single time on some part of the FakeSMC stuff. The kp happens at slightly different parts of the message, but always the last line on the screen is something related to FakeSMC, such as, "New prioritized handler CPUSensors".

I know that I am using a newer bios. I don't know how to downgrade. Also, there are slight differences between the Z820 that Bilbo has and my Z620.

For now I am using the computer by booting off of the USB drive.

I am at a loss on how to troubleshoot. I'd love to have my USB ports working and not need to boot off of a thumb drive. Performance similar to Windows would also be great. Lastly, power saving is a nice to have.

Is there any data I can share that would help me do better at troubleshooting?

Also, one challenge I have when reading the guide at the start of the thread is it's not clear to me which steps are optional (i.e. informative) and which ones I actually should perform. I may have done some things twice because I followed the steps that were optional.

P.S. I am OK with Sierra, but I wouldn't mind being on High Sierra. I tried the NTT123 guide and couldn't even get booted. I have my critical files backed up so I don't mind formatting and starting over. I think that guide is a little to short and intermingled with some outdated info.

Screen Shot 2018-04-15 at 11.48.16 AM.png

Screen Shot 2018-04-15 at 11.48.02 AM.png

Share this post


Link to post
Share on other sites
On 15/04/2018 at 2:03 PM, SquidGM said:

Hello, what about USB3? I have Z620 but have errors only with USB.

Hello SquidGM,

I tried using the mXHCD.kext but it does not seem to work for me. At least for the Z620.  I didn't do any complex patches or fixes and just use High Sierra as-is.  Hope there is a simple fix for USB3 for us.  But I can live without it.  I just need Thunderbolt and a stable macOS.

Hope that you have better luck.

Update :

I have followed Bilbo's instructions for fixing religiously until the USB3 which includes using MaciASL to generate my own DSDT, compile etc. and the audio, USB2 and USB3 works!! I'm skipping PM because it looks complicated and wouldn't want a kp to troubleshoot!

Somehow, the fixes messed with IRQ for my bluetooth and now it's disabled....

Edited by asiansurf
Update to include USB3 success! But bluetooth disabled.

Share this post


Link to post
Share on other sites
16 hours ago, newz said:

P.S. I am OK with Sierra, but I wouldn't mind being on High Sierra. I tried the NTT123 guide and couldn't even get booted. I have my critical files backed up so I don't mind formatting and starting over. I think that guide is a little to short and intermingled with some outdated info.

Hello newz,

The best thing about Bilbo's guide is that you can use either his older El Capitan or this new one for Sierra on our Z620 too.  However, there is one very important BIOS setting that you have to perform for our Z620 (Z420).  It is also in the NTT123 guide you have linked above.  That is to Set ACPI CPU tables to Legacy.

I've been trying too many times to boot the High Sierra install on USB until I set the ACPI tables.  I set it on my Z620 and it works.  It is such a silly obscure BIOs setting that could have saved me hours of tinkering!

Hope it works for you.

@Bilbo. Sorry for the off topic in your thread.

Edited by asiansurf

Share this post


Link to post
Share on other sites
3 hours ago, asiansurf said:

Hello newz,

The best thing about Bilbo's guide is that you can use either his older El Capitan or this new one for Sierra on our Z620 too.  However, there is one very important BIOS setting that you have to perform for our Z620 (Z420).  It is also in the NTT123 guide you have linked above.  That is to Set ACPI CPU tables to Legacy.

I've been trying too many times to boot the High Sierra install on USB until I set the ACPI tables.  I set it on my Z620 and it works.  It is such a silly obscure BIOs setting that could have saved me hours of tinkering!

Hope it works for you.

@Bilbo. Sorry for the off topic in your thread.

Sadly, that change had already been made. I will work through it again and see if I get different results the second time around. I have tried so many things that I can't keep track of it all at this point.

Share this post


Link to post
Share on other sites

Sorry guys. I've been busy. I need time to read and answer last topics, because they are long and complicated. I hope to be free soon to answer.

Share this post


Link to post
Share on other sites

I have had some improvements with my z620. I downgraded the bios to v3.91, same as used throughout this guide. Then I got rid of my EFI/CLOVER folder, copied over from the installer and then followed the guide. All worked according to plan.

 

I appear to have semi-functional USB3. For example, USB speakers that work on my MBP don't work. However, the system does pick up the microphone in the webcam connected to the hub built into the speakers.

 

[computer - usb3 port] ---> [speakers with hub] ---> Web cam / microphone (only the microphone works) Weird, huh? (unless you plug them in after booted)

 

Lastly, patching the DSDT did not work for me, and I followed every step spelled out in the guide and in the posts by oliveg. I copied the tables to the DSDT and that did not have an effect. I even specified extra parameters to ssdtPRGen.sh in order to explicitly describe my CPU.

 

$ ./ssdtPRGen.sh -p 'E5-2680 v2' -b Mac-F60DEB81FF30ACF6 -c 3 -x 1 -cpus 2 -l 40


ssdtPRGen.sh v0.9  Copyright (c) 2011-2012 by † RevoGirl
             v6.6  Copyright (c) 2013 by † Jeroen
             v21.5 Copyright (c) 2013-2018 by Pike R. Alpha
-----------------------------------------------------------
Bugs > https://github.com/Piker-Alpha/ssdtPRGen.sh/issues <

System information: Mac OS X 10.12.6 (16G1314)
Brandstring: "Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz"

Override value: (-p) processor model, now using: E5-2680 v2!
Override value: (-b) board-id, now using: Mac-F60DEB81FF30ACF6!
Override value: (-c) CPU workarounds, now set to: 3!
Override value: (-x) XCPM mode, now set to: 1!
Override value: (-cpus) number of processors, now using: 2!
Override value: (-l) number of logical processors, now using: 40!

Version: models.cfg v171 / Ivy Bridge.cfg v150


Warning: No ACPI Processor declarations found in DSDT!
	 Using assumed Scope (\_SB) {}


Error: Processor name(s) not found ...
Aborting ...
Done.

 

 

I have the SSDT-1-CpuDef.aml files, which I think you described as being the format that works best.

$ ls -1 /Volumes/EFI/EFI/CLOVER/ACPI/origin/
APIC.aml
ASF!.aml
BGRT.aml
DSDT.aml
DumpLog.txt
FACP.aml
FACS.aml
FPDT.aml
HPET.aml
MCFG.aml
RSDP.aml
RSDT-FACP.aml
RSDT-FACS.aml
RSDT.aml
SLIC.aml
SLIT.aml
SRAT.aml
SSDT-0-WMI.aml
SSDT-1-CpuDef.aml
SSDT-2-CpuPm.aml
UEFI.aml
XSDT.aml

 

I am on the latest Clover, version 4439.

 

I am working and functional, so I will proceed to set up my computer for regular use. Hopefully I don't need to re-install it any time soon. Thanks for the document and, if possible, any further help you may provide.

Edited by newz

Share this post


Link to post
Share on other sites
34 minutes ago, newz said:

I appear to have semi-functional USB3. For example, USB speakers that work on my MBP don't work. However, the system does pick up the microphone in the webcam connected to the hub built into the speakers.

 

[computer - usb3 port] ---> [speakers with hub] ---> Web cam / microphone (only the microphone works) Weird, huh? (unless you plug them in after booted)

 

 

Apparently it's weirder than I thought. The USB 3 on the back sometimes work, sometimes doesn't. I can always plug one USB2 device in on the back and one on the front. Sometimes, that's all that works. Sometimes, I can do more. Not a huge deal at the moment, but would be nice to have working. I will do some troubleshooting and see if I can post details. I may be delayed slightly, because the computer is working and it's almost the end of semester.

Share this post


Link to post
Share on other sites

I had a weird situation, after running great for a while: yesterday I did a reboot and got a KP. Turns out the AstekFusion2Adapter kexts were causing the KP, strange thing is I didn't recall applying any update or a like.  I had to boot with the USB installer, mount the EFI partition to delete the old AstekFusion2Adapter kexts and replaced with the patched version contributed by despeinao. I'm glad the system is working again, not having to reinstall OSX.

Share this post


Link to post
Share on other sites

I have High Sierra working quite well. I took my working Sierra setup that I created using Bilbo's instructions, copied the files from kext/10.12 to 10.13 and put them on the High Sierra drive created by [url=&quot;http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/&quot;]#####[/url]. Once the install finished I had to copy the apfs.efi file from /usr/standalone/i386 and put it into CLOVER/drivers64UEFI. I'm fully updated on 10.13.4 (17E202) and I have USB2 and USB3 all working. There is probably still some flakiness happening as mentioned above, but I have a USB hub hooked up and otherwise my needs are pretty basic, so I'm content.

Share this post


Link to post
Share on other sites

Hi Bilbo,

 

thx for your great guide ....

based on your guide - i made a perfect hackintosh with my z420

even sleep and wakeup is working

differences

- i use imac 12.2 as smbios (seems to work perfect with sleep)

- you have to choose legacy for "Video Option Roms" in the BIOS, this will make DUAL Monitor work at Boot witout Problems

google for "HP z420 first attempt" to see my "guide" (starts at Page 2 of the Thread)

 

regards

Ochja 

Share this post


Link to post
Share on other sites

For those with "No ACPI Processor declarations found in DSDT"  error

 

Hi Bilbo,

 

Thanks for having taken the time to write this awesome guide! I've followed it to every detail and now finally have my HP Z620 fully working, and can finally use my Logic Pro again, and continue to use my Emagic AMT-8 and 2x Unitor 8 MIDI interfaces, saving me at least 350 euro if I had to buy new interfaces for Windows 10! So I'm finally "turned" to Mac, who would have thought that ;-)

 

It cost me quite an effort to get the SSDT.aml to be generated, because ssdtPRGen gave the error that you described: "No ACPI Processor declarations found in DSDT!". The solution that you described - appending the contents of the SSDT file to my DSDT file, rebooting and trying again with the updated DSDT - unfortunately didn't work for me. There was no SCK0 to be found in any of the SSDT files in the "origin" folder, so whatever I copied to my DSDT, it still didn't contain what ssdtPRGen was looking for. 


Fortunately, the following solution, from Piker-Alpha himself, did work (https://github.com/Piker-Alpha/ssdtPRGen.sh/issues/232):

"The processor declaration cannot be found in the DSDT but instead are part of SSDT-1.aml so we have to be a little creative:

1.) Copy ssdt-1.aml to ~/Desktop/dsdt.aml
2.) Copy apic.aml to ~/Desktop/apic.aml
3.) run: ./ssdtPRGen.sh -mode custom -p 'E5-2670 V1'

This way it will search for the Processor{} declarations in your SSDT-1.aml (which we renamed)."

 

This method is even simpler, and I even used the plain files from the original extract from Clover F4. I just copied the two files to my Desktop, renamed the ssdt-1 to dsdt  and ran the script with the -mode custom parameter, which resulted in the ssdt.dsl and ssdt.aml being created in my Library/ssdtPRGen folder:

./ssdtPRGen.sh -p 'E5-2650 v2' -b Mac-F60DEB81FF30ACF6 -c 3 -x 1 -cpus 2 -l 32 -target 1 -mode custom

 

Maybe you can include this as an alternative, or even preferred method in your excellent guide for people who get that error?

 

On a sidenote: not all my USB ports function. This is most probably caused by the 4-port USB3 PCI-e card in my computer, which apparently confuses the enumeration of the built-in USB ports. So the USB port fix doesn't work properly when having more ports than the standard machine has. Do you have any ideas what I could do to get both the native ports and the PCI-e ports to work? 

 

Thanks again for your efforts!

Cheers,

Rainer

 

 

Edited by Planeshifter

Share this post


Link to post
Share on other sites

maybe your z620 is similar to my z420 ?

i have to change the ports in the SSDT-UIAC-ALL with maciASL

 

my HP z420 USB Ports are

USB3
- PEX3
USB2
- EH02 PR21
-- HP22 (Front USB Card Reader - fully working ;-) )
-- HP23 (Front USB 2.0 Port)
-- HP26 (Front USB Card Reader)

- EH01 PR11
-- HP11
-- HP12
-- HP13
-- HP14
(the 4 USB 2.0 rear Ports)

 

regards
 

SSDT-UIAC-ALL.aml

Share this post


Link to post
Share on other sites
On 5/4/2018 at 8:05 AM, ochja said:

maybe your z620 is similar to my z420 ?

i have to change the ports in the SSDT-UIAC-ALL with maciASL

 

my HP z420 USB Ports are

USB3
- PEX3
USB2
- EH02 PR21
-- HP22 (Front USB Card Reader - fully working ;-) )
-- HP23 (Front USB 2.0 Port)
-- HP26 (Front USB Card Reader)

- EH01 PR11
-- HP11
-- HP12
-- HP13
-- HP14
(the 4 USB 2.0 rear Ports)

 

regards
 

SSDT-UIAC-ALL.aml

 Hello,

Not woking for me.

Share this post


Link to post
Share on other sites

Hello, thanks for the really well written instruction. Still, I'm not too sure if I'm following it properly.

 

After patching DSDT.ami, my system is keep restarting within the boot phase.

I'm going to do install macOS from the start again, but I really want to know what I have done wrong to prevent this happening again. Thanks!

 

Edited by jihwoanahn

Share this post


Link to post
Share on other sites

Thank you, bilbo for you detailed guide! 

I want to report that sleep is working on my Z820. Still can't reproduce it on another installation with High Sierra because of lack of knowledge

sysinfo.png.08625ef45fee5342ff6d9c8ca20131f9.png

Edited by jack.avenger
bad English

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By amadeusex
      Hi there y' all.
       
      I'm selling my hp z820 with the specs listed below since i accidentally bought me another one (that's what i told to my wife anyway).
       
      The machine runs flawlessly High High Sierra 10.13.6 and also has Win7 pro and Win10 pro licences tied to the machine.
       
      The machine is in Athens Greece
       
      I'm asking for 1000 euros shipped within the European Union.
       
            Features     • Make: HP • Modell: Workstation Z820   • Processor: 2x Intel XEON Quad-Core E5-2670 • Chipset: Intel C602    • Memory: 64 GB ECC RAM • Sound: Realtek ALC262   • Graphics Card: nVidia Quadro K600   • SAS - Controller: LSI SAS2308 with RAID (0, 1, 5, 10) • SSD - 256 GB • DVD RW   • 2x Ethernet-LAN (RJ-45): 2 (Dual Gigabit - 1000Mbit/s)   • FireWire: 2x (1x Front + 1x Back) • USB 2.0: 5x (1x Front + 4x Back) • USB 3.0: 4x (2x Front + 2x Back)   • PS/2 • serial RS232 • Line-In • Line-Out • Microphone • FireWire (6polig)    • PSU: 1125 Watt    • (WxHxD): 203mm x 444mm x 525mm • Weight: 21,1kg   The machine is configured to also run MacOS 10.12.6 High Sierra without any hiccups and complete working power management.   Geekbench 4 64-bit  MacOs Results
      https://browser.geekbench.com/v4/cpu/12062123
      Geekbench 4 64-bit  Win10 Results
      https://browser.geekbench.com/v4/cpu/11972736
      The pictured drive trays are not included - the original placeholders will be mounted!


    • By t0mmenhansen
      I havent used my hackintosh in a while. I wanted to boot to my mac drive. This error comes up when i try to boot. Ive tryed using explorer++ and update the lilu kext and whatevergreen kext, no luck yet. Any ideas?
       
      9700k
      16GB corsair
      1080 nvidia card
      z370-f mobo
      mac drive is an SSD from kingston
      Display port outpoot
       
    • By fusion71au
      Clover r4961 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.14 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r4961 for VMware.zip". Mount Clover-v2.4k-4961-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&amp;t=6771   Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        Mojave Full DSDT patch   http://olarila.com/forum/viewtopic.php?f=59&amp;t=6428   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&amp;t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        First... If you need DSDT edits... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation --Create a bootable copy of El Capitan /  Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder   https://olarila.com/files/Clover.Folder/CLOVER.LGA775.zip   --Install EL Capitan / Sierra / High Sierra and boot into system!     Post Installation   --Install Clover and replace with my folder   https://olarila.com/files/Clover.Folder/CLOVER.LGA775.zip     --Reboot and activate video!   Bingo! Now you need a fine tune! DSDT Time!   My DSDT GA P35-DS3   DSDT.MaLd0n.zip     Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -LPC -HDEF -RTC -EHCI -UHCI -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF --Native Power Management
       
      Use Clover, check Generate P and C States
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --AUDIO
       
      Device HDEF + AppleAlc + Lilu
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
×