Jump to content

Freezes in boot process


mchouin
 Share

1 post in this topic

Recommended Posts

i recently installed JaS 10.4.6 through VMware and had no problems with the install process...when it came to boot natively, the boot process froze at this line "HFS: created HFBT on Mac OS X" (Mac OS X is the name of the partition i installed on). I left my computer here overnight, thinking it was just taking a while, but nothing happened...what should i do? I installed all the right patches off the DVD so I know its not that. I have a Compaq Presario v2610CA btw.

 

Here's some info from CPUz that may be useful

 

Processor 1 (ID = 0)

Number of cores 1

Number of threads 1 (max 1)

Name Mobile AMD Sempron 3000+

Codename Albany

Specification Mobile AMD Sempron Processor 3000+

Package Socket 754

CPUID F.C.2

Extended CPUID F.2C

Brand ID 35

Core Stepping DH-E6

Technology 90 nm

Core Speed 798.3 MHz (4.0 x 199.6 MHz)

HT Link speed 798.3 MHz

Stock frequency 1800 MHz

Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3

L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size

L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size

L2 cache 128 KBytes, 16-way set associative, 64-byte line size

FID/VID Control yes

max FID 9.0x

VID range 1.075V - 1.350V

K8 Thermal sensor yes

K8 Revision ID 4.2

Attached device PCI device at bus 0, device 24, function 0

Attached device PCI device at bus 0, device 24, function 1

Attached device PCI device at bus 0, device 24, function 2

Attached device PCI device at bus 0, device 24, function 3

 

 

Chipset

------------------------------------------------------------------------------

 

Northbridge ATI Xpress 200 (RS480) rev. 01

Southbridge ATI SB400 rev. 00

Memory Type DDR

Memory Size 512 MBytes

Memory Frequency 159.7 MHz (CPU/5)

CAS# 2.5

RAS# to CAS# 3

RAS# Precharge 3

Cycle Time (tRAS) 7

Bank Cycle Time (tRC) 10

DRAM Idle Timer 16

Command Rate 2T

Link to comment
Share on other sites

 Share

×
×
  • Create New...