Jump to content
TomZanna

Post install Asus X550JX DM217T

41 posts in this topic

Recommended Posts

Advertisement

Ma mettere le specifiche hardware in firma costa troppa fatica? :whistle:

Se la regolazione della luminosità non ti funziona nemmeno con Azulpather, probabilmente va modificato il DSDT.


Però nelle info di sistema mi esce Intel Iris Pro Graphics 5200 1536 MB, è normale?

Normalissimo con tutte le integrate Haswell.

Share this post


Link to post
Share on other sites

Non è questione di troppa fatica, ma che sono novizio del sistema, ora provvedo a sistemarle :)

 

 

Ma mettere le specifiche hardware in firma costa troppa fatica? :whistle:

Se la regolazione della luminosità non ti funziona nemmeno con Azulpather, probabilmente va modificato il DSDT.


Normalissimo con tutte le integrate Haswell.

Share this post


Link to post
Share on other sites

foskvs

la luminosità è presente

il discorso attuale sono i glitch...problemi su crome etc

Ah, mea culpa. Avevo capito che lo slider c'era ma non funzionava.

 

Allora FakePCIID. Sul mio hanno fatto il "miracolo".

Share this post


Link to post
Share on other sites

Esatto, il grosso problema è quello, la luminosità funziona molto bene, anche con i tasti sulla tastiera è possibile regolarla senza problemi. L'unico problema amletico al momento è quello dei glitch grafici su alcune app :)

 

foskvs

la luminosità è presente

il discorso attuale sono i glitch...problemi su crome etc

Share this post


Link to post
Share on other sites

quindi anche se segna 4600, vado diretto della tua patch, rimuovendo prima i due fake? 

 

si  hai ragione mio sbaglio nello specifico del link, ma il discorso è lo stesso

Share this post


Link to post
Share on other sites

Ah, mea culpa. Avevo capito che lo slider c'era ma non funzionava.

 

Allora FakePCIID. Sul mio hanno fatto il "miracolo".

Gli ho già messo i FakePCIID, e dovrebbe averli anche attualmente ma non hanno risolto il problema

per questo ho consigliato AzulPatcher

quindi anche se segna 4600, vado diretto della tua patch, rimuovendo prima i due fake? 

Si...prova

Share this post


Link to post
Share on other sites

Esatto, al momento ci sono, ma non hanno sfortunatamente risolto il problema.

 

Gli ho già messo i FakePCIID, e dovrebbe averli anche attualmente ma non hanno risolto il problema

per questo ho consigliato AzulPatcher


Si...prova

Share this post


Link to post
Share on other sites

Il 4750HQ in effetti ha la Iris Pro 5200. Forse non vengono nemmeno caricati.

 

Edit:

 

Il vero MacBookPro11,2 ha la stessa igpu e usa ig-platform-id=0d260007, magari può aiutare.

Share this post


Link to post
Share on other sites

Sai che ti dico? Che sei un grande! Effettivamente ora funziona e non da questi problemi dei glitch al momento.

 

Unica domanda, l'ultima giuro, c'è modo di abilitare il codec hardware "accellerato" così da aiutare Final Cut?

 

Grazie ancora.

 

Gli ho già messo i FakePCIID, e dovrebbe averli anche attualmente ma non hanno risolto il problema

per questo ho consigliato AzulPatcher


Si...prova

Share this post


Link to post
Share on other sites

Sai che ti dico? Che sei un grande! Effettivamente ora funziona e non da questi problemi dei glitch al momento.

 

 

Bene...

Unica domanda, l'ultima giuro, c'è modo di abilitare il codec hardware "accellerato" così da aiutare Final Cut?

 

Grazie ancora.

 

Non ho capito la domanda...

Share this post


Link to post
Share on other sites

Si scusami, Quick Sync, se c'è modo di abilitarlo o lo è già nativamente, così riesco a dare una spinta in più nel rendering con Final Cut

 

EDIT: rettifico tutto, ho controllato ora con Mac X Converter e risulta attivo. Per attivarlo anche sul PC Fisso, è meglio che faccio un thread nuovo nella sezione opportuna?

Bene...

Non ho capito la domanda...

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      --Donations via PayPal--
      https://tinyurl.com/r2bvzm7
       
      --Original Topic--
      https://www.olarila.com/topic/6874-olarila-hackbook-lenovo-ideapad-s145-mojave-catalina-full-dsdt-patches/
       

       
      -Perfect HackBook, HDMI Audio/Video, Bluetooth, AirPlay, Sleep, Lid Sleep, Auto Sleep, Audio, etc!
      -Wifi card has been replaced with Dell DW1560!
      -I'm using a S145-15IWL Model with Intel Core i5 8265u / Intel UHD Graphics 620
      -Update bios/uefi to last version
       
      --Installation--
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Clover Folder--
      Just paste EFI folder inside EFI partition
      https://www.olarila.com/files/Clover.Folder/Lenovo IdeaPad S145.zip
      Notebooks with ELAN trackpad use it with my folder above
      IdeaPad S145 ELAN.zip
       
      Bluetooth Broadcom
      Bluetooth Broadcom.zip
       
      CPUFriend for i5-8265U
      CPUFriend i5-8265U.zip
       
      --Full DSDT Patches--
      -My DSDT
      DSDT Lenovo IdeaPad S145.zip
       
      This DSDT work on S145-14IWL, S145-15IWL, V14-IWL, V15-IWL models
      -Patches
      -FIX ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 11 ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PRWs -_DSMs -PNLF -BRIGHTNESS KEYS -I2C -NATIVE USB -ARPT -GFX0 -DTGP -kUSBCompanionIndex -io-device-location -FULL RENAMED DEVICES   --IGPU Patch--
      Video solution with HDMI Audio and Video
      <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,GfxYTile</key> <data> AQAAAA== </data> <key>AAPL,ig-platform-id</key> <data> CQClPg== </data> <key>device-id</key> <data> pT4AAA== </data> <key>enable-hdmi20</key> <data> AQAAAA== </data> <key>framebuffer-con0-alldata</key> <data> AAAIAAIAAACYAAAA </data> <key>framebuffer-con0-enable</key> <integer>1</integer> <key>framebuffer-con1-alldata</key> <data> AQEJAAAIAADHAQAA </data> <key>framebuffer-con1-enable</key> <integer>1</integer> <key>framebuffer-con2-alldata</key> <data> AgYKAAAEAADHAQAA </data> <key>framebuffer-con2-enable</key> <integer>1</integer> <key>framebuffer-fbmem</key> <data> AACQAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-stolenmem</key> <data> AAAwAQ== </data> <key>framebuffer-unifiedmem</key> <data> AAAAgA== </data> <key>hda-gfx</key> <string>onboard-1</string> <key>model</key> <string>Intel Corporation, Cannon Point-LP Iris Plus Graphics 655</string> </dict>   --Native USB Fix for Notebooks - No Injector/Kext Required--
      https://www.olarila.com/topic/6878-guide-native-usb-fix-for-notebooks-no-injectorkext-required/
      https://www.olarila.com/topic/6181-guide-native-usb-fix-for-desktops-no-injectorkext-required-skylake/
       
       
      -ScreenShots

































      -Links
       
       
      Clover https://github.com/CloverHackyColor/CloverBootloader
      AirportBrcmFixup.kext https://github.com/acidanthera/AirportBrcmFixup
      AppleALC.kext https://github.com/acidanthera/AppleALC
      Brcm Bluetooth https://github.com/acidanthera/BrcmPatchRAM
      Lilu.kext https://github.com/acidanthera/Lilu
      SystemProfilerMemoryFixup.kext https://github.com/Goldfish64/SystemProfilerMemoryFixup
      VirtualSMC.kext https://github.com/acidanthera/VirtualSMC
      VoodooI2C.kext https://github.com/alexandred/VoodooI2C
      VoodooPS2Controller.kext https://github.com/acidanthera/VoodooPS2
      WhateverGreen.kext https://github.com/acidanthera/WhateverGreen
      MaciASL - https://github.com/acidanthera/MaciASL
      acpica - https://github.com/acpica/acpica
      AptioMemoryFix.efi https://github.com/acidanthera/AptioFixPkg
      ApfsDriverLoader.efi https://github.com/acidanthera/AppleSupportPkg
      HFSPlus.efi https://github.com/JrCs/CloverGrowerPro/blob/master/Files/HFSPlus/X64/HFSPlus.efi?raw=true
      Hackintool https://github.com/headkaze/Hackintool
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
       
      We're all here to have fun and learn from each other!
    • By kushwavez
      A really good motherboard with macOS compatible bult-in Wifi & Bluetooth

      ASUS Z170-Deluxe (with Wifi)
      BIOS: v3801
      CPU: i7-6700K 4.0 to 4.2 GHz (w/o OC)
      RAM: 1x 16 GB Corsair DDR4 2400 MHz
      GPU: Intel HD 530 (Headless) & ASUS Radeon RX 5700 OC 8 GB
      Audio: ALC 1150
      Ethernet: I219V2, I211-AT
      WiFi & Bluetooth: Broadcom BCM94360HMB Half-Mini-PCI-E
      More Specs: https://www.asus.com/Motherboards/Z170-DELUXE/specifications/
       
      Catalina 10.15.3 - Windows 10
      What is working:
      BCM94360HMB Wifi and Bluetooth AirDrop, Handoff, FaceTime, Messages, App Store, iCloud, etc. Intel HD 530 (QE/CI tested, but now I'm using it in headless) Sleep RX 5700 (QE/CI with 2 1080p monitors connected) Sound USB Ports Two Ethernet ports macOS with a light OC (4.12 GHz - 4.5 Ghz, XMP, ASUS optimal) No problem so far ASUS HyperKit with a KINGSTON NVMe SSD - 250 GB  
      What is not working:
      -  
       
      Not tested:
      VideoProc says that Hardware Decoding\Encoding is fully supported and enabled on both HD 530 and RX 5700 but I didn't test it Thunderbolt (no equipment)  
      Issues:
      None  
      BIOS Settings:
      Boot\CSM (Compatibility Support Module): Launch CSM: Disabled Boot\Secure Boot: OS type: Other OS Secure Boot State: Disabled Advanced\System agent (sa) Configuration: VT-d: Enabled Graphics Configuration: Primary Display: Auto iGPU Multi-monitor: Enabled RC6(Render Standby): Enabled DVMT Pre-Allocated: 128M Advanced\PCH Storage Configuration: SATA Mode Selection: AHCI HyperKit: Enable (if you have NVMe SSD with ASUS HyperKit) Advanced\CPU Configuration: Intel Virtualization Technology: Enabled CPU- Power Management Control: Intel SpeedStep: Enabled CPU- C-States: Enabled Intel SpeedShift: Enabled  
      Getting ready for installation:
      Download the bootpack (Clover v5098): Click here -> ASUS-Z170_catalina.zip  
      Installation:
      Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager) Copy my Clover folder to the USB's EFI folder Boot with the Installer USB If you have any problem (kp or freeze) boot with config_debug.plist to see what causes the issue  
      Post Installation:
      Download Clover Configurator and generate a new Serial Number for yourself  
      Some pictures:
       

       




       
       
       
      Catalina & Windows 10 Dual-Boot (clean install, on one drive):
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac)
       Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart
      Boot into your Win installer, Format the partition you created for Win, install. 
      Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type: 
      bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi  
      You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)  
      Mounting EFI from Windows:
      Open cmd in administrator mode and type: mountvol b: /s (This will mount your EFI) Open Total Commander or Explorer++ in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI)  
      Notes:
       
      2020.02.11: Updated to 10.15.3 -> No problem when/after installing
      2020.01.19: Added ASUS HyperKit NVMe SSD to the "What is working" list
      2020.01.12: Tested system with OC, added more informations to BIOS settings
      2020.01.11: Added SmallTreeIntel82576.kext for 2nd Ethernet, Tested Ethernet ports
      2020.01.11: First upload
       
    • By kevin_1351
      tl;dr: VirtualSMC causes me a flood of log messages and correlated cpu spikes. FakeSMC doesn't.
       
      Hi, I have almost finalized my Huawei Matebook X Pro Opencore setup and everything is working very well besides wifi/bt ofc (which is about to change).
       
      However, I noticed how the cpu usage sometimes went up a little and when looking at the Console I could see a never-ending flood of:
      default 14:05:05.983292+0100 loginwindow clamshellStateChanged | Clamshell state changed: closed=0, shouldSleepWhenClosed=2 default 14:05:05.982975+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:05.982996+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:06.985932+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:06.985949+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:06.986134+0100 loginwindow clamshellStateChanged | Clamshell state changed: closed=0, shouldSleepWhenClosed=2 default 14:05:39.426574+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:39.426729+0100 loginwindow clamshellStateChanged | Clamshell state changed: closed=0, shouldSleepWhenClosed=2 default 14:05:39.426585+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:41.431085+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:41.431097+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:41.431246+0100 loginwindow clamshellStateChanged | Clamshell state changed: closed=0, shouldSleepWhenClosed=2 default 14:05:42.433068+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:42.433227+0100 loginwindow clamshellStateChanged | Clamshell state changed: closed=0, shouldSleepWhenClosed=2 default 14:05:42.433078+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:43.434453+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:43.434465+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:43.434622+0100 loginwindow clamshellStateChanged | Clamshell state changed: closed=0, shouldSleepWhenClosed=2 default 14:05:44.436155+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:44.436166+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0  
      As you can see, multiple of these per second. Another guy with the same computer is also having this issue and posted a dsdt change to fix it. This fix didn't solve anything though
      He tried to limit the Notify call by implementing a state change requirement before calling Notify.
       
      Here is the original acpi:
      Scope (_SB) { Device (LID) { Name (_HID, EisaId ("PNP0C0D") /* Lid Device */) // _HID: Hardware ID Method (_LID, 0, NotSerialized) // _LID: Lid Status { Local0 = One Local0 = ^^PCI0.LPCB.EC0.RPIN (0x05, 0x06) If ((Local0 == 0x55)) { Local0 = Zero } Else { Local0 = One } ^^PCI0.GFX0.CLID = Local0 Return (Local0) } } Device (PWRB) { Name (_HID, EisaId ("PNP0C0C") /* Power Button Device */) // _HID: Hardware ID Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0B) } } } Scope (_SB.PCI0.LPCB.EC0) { Method (_Q81, 0, NotSerialized) // _Qxx: EC Query, xx=0x00-0xFF { Local0 = ^^^^LID._LID () If ((Local0 == Zero)) { ADBG ("LID-OFF") SGOV (0x02030009, Zero) SGOV (0x02060000, Zero) } Else { ADBG ("LID-ON") SGOV (0x02030009, One) SGOV (0x02060000, One) Notify (ALSD, 0x80) // Status Change } Notify (LID, 0x80) // Status Change } } Which he changed to: 
      Scope (_SB) { Device (LID) { Name (_OLD, One) // assuming everything else.. the lid should start open? Name (_HID, EisaId ("PNP0C0D") /* Lid Device */) // _HID: Hardware ID Method (_LID, 0, NotSerialized) // _LID: Lid Status { Local0 = One Local0 = ^^PCI0.LPCB.EC0.RPIN (0x05, 0x06) If ((Local0 == 0x55)) { Local0 = Zero } Else { Local0 = One } Return (Local0) } } Device (PNLF) { Name (_HID, EisaId ("APP0002")) // _HID: Hardware ID Name (_CID, "backlight") // _CID: Compatible ID Name (_UID, 0x0A) // _UID: Unique ID Name (_STA, 0x0B) // _STA: Status } Device (PWRB) { Name (_HID, EisaId ("PNP0C0C") /* Power Button Device */) // _HID: Hardware ID Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0B) } } } Scope (_SB.PCI0.LPCB.EC0) { Method (_Q81, 0, NotSerialized) // _Qxx: EC Query, xx=0x00-0xFF { Local0 = ^^^^LID._LID () If ((Local0 == Zero)) { ADBG ("LID-OFF") SGOV (0x02030009, Zero) SGOV (0x02060000, Zero) } Else { ADBG ("LID-ON") SGOV (0x02030009, One) SGOV (0x02060000, One) Notify (ALSD, 0x80) // Status Change } If ((^^^^LID._OLD != Local0)) { Notify (LID, 0x80) // Status Change ^^^^LID._OLD = Local0 } } } Besides me not seeing any reason to declare _OLD in LID. The idea itself shouldn't be too bad right? Well, as I said, his fix didn't work.
       
      In fact, to prove that Method _Q81 doesn't have anything to do with the issue at all, I created a Clover/Opencore patch to change _Q81 to XQ81. This resulted in my lid not working at all of course, but the log flooding still persisted!
      So _Q81 doesn't have anything to do with the issue afaik.
       
      Now, further Google searches led me to a chinese post where he tied the issue to VirtualSMC. And indeed, by migrating to FakeSMC the issue is no more.
       
      Unfortunately, I'm very fond of VirtualSMC for various reasons. So I would very much like to keep it. If not I'd have to implement the old way of doing Battery monitoring etcetc. Which isn't very elegant and update proof as it requires DSDT patching.
       
      So, I do believe that the issue may very well be in the DSDT code, perhaps in the ambient light part. I'm not very skilled at this and just started studying the ACPI spec 3 days ago.
       
      Could someone please help me out? Thanks a lot in advance
       
       
      origin.zip
      OC.zip
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://www.olarila.com/topic/5165-olarila-app-images-and-folders/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
        First... If you need DSDT edits... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation --Create a bootable copy of El Capitan /  Sierra / High Sierra / Mojave https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install EL Capitan / Sierra / High Sierra and boot into system!     Post Installation   --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/     --Reboot and activate video!   Bingo! Now you need a fine tune! DSDT Time!   My DSDT GA P35-DS3   DSDT.MaLd0n.zip     Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -LPC -HDEF -RTC -EHCI -UHCI -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF --Native Power Management
       
      Use Clover, check Generate P and C States
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --AUDIO
       
      Device HDEF + AppleAlc + Lilu
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://www.olarila.com/topic/5165-olarila-app-images-and-folders/   Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell   https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Skylake, Kabylake and Coffeelake is here https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
          First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
×