Jump to content

There's nothing here yet

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By e97
      Until Apple blesses us with the MacPro7,1 this is for those that require tools do their work. An appropriate bicycle for the mind.
      HackPro X99 System

       

       

       
      Specs:
       
      CPU: Intel Xeon E5-2678 v3 (12 core, 2.5 GHz / 3.3 GHz Boost)
      Motherboard: JINGSHA X99-8D3
      RAM: 16GB DDR3-14900R 1866Mhz ECC RDIMM modules
      GPU: Radeon RX Vega 64 8GB
      NVMe: Phison E12 m.2 NVMe PCI-E 3.0 x4 SSD
      Water blocks: BARROW CPU + GPU
      Radiator: 360mm
      Pump: DDC
       
      Case dimensions: 431 mm x 342 mm x 177 mm
       
       

       
      NVMe

       
      EFI-Clover-X99.zip
       
       
      Thanks:
       
      Apple
      Clover developers
      vit6969
      Diego
      ZISQO
      Anyone else I forgot
       
       
    • By DSA2
      Salve a tutti
      Fin' ora non mi sono informato molto su come sistemare il boot , prima schermata di avvio.
      In pratica ogni volta devo spostare con freccetta e selezionare mio Hard disk .
      Allego foto fatte da cell. della schermata boot .
      Bisognerebbe cancellare le entries ?
      E nel caso in cui vorrei modificare la grafica clover ?
      Grazie in anticipo per le delucidazioni.

       





    • By zkingtut
      Hello Everyone ,,
       
      I'd  like to share with you my experience with Lenovo ThinkPad P50 ( EFI , and Installation Process with some tips ) Hopefully to be useful for anyone who own Lenovo ThinkPad P50 
       
      Before start I want to show you my device specs , and I'm  sure 99% this will work too with any P50 have different spec. specially Intel i7 CPUs:
       
      - Intel Xeon E-3 1535 v5 ( P530 Intel HD Graphics )
      - 32 GB RAM
      - 256 GB SK Hynix Nvme SSD pc401 hfs256gd9tng-62a0a - for Mac OS  ( be careful not all nvme ssd are compatible)
      - 256 GB Samsung Evo 850 SSD - for Windows 
      - 4K Screen 
      - Nvidia Quadro M2000M 4 GB ( Useless - Disabled )
      - Intel WiFi Card ( Should be change to a compatible Broadcom one )
       
      BIOS SETUP :
       
      I highly recommend this steps before going to BIOS SETUP according to my experience with this Laptop :
       
            *( Update your BIOS Firmware to the latest one using windows )
       
            *( Remove Battery , Open the back cover and unplug the small CMOS BATTERY for about  4~5 minutes and put everything back again )
       
             * ( Remove any SSD HDD Nvme disks , USB , DisplayPort , Dock .. etc during installation, keep only the target Disk )
       
      -------------------------------------------
      Now Power your PC and Press F1 to enter the BIOS SETUP
       
         - Reset BIOS to its defaults
         - Adjust Date and Time 
         - Config ----> Network ---> Wake Up on Lan ( AC Only )
                                                         Network Stack ( Disabled )
       
        - USB ----> USB UEFI support  ( Enabled)
       
        - Display ------> Total Graphic Memory (256 MB)
                                     Graphic Device ( Hybrid)
       
        - RAID -----> Disabled
       
        - Security -----> Security Chip Selection ( Discrete TPM )
                                     Secure BOOT ( Disabled )
                                     Intel SGX Control ( Software Control )
       
        - Start Up ------>BOOT Priority order ( USB HDD - Mac OS Disk - Windows - and so on ....... with this order )
                                     UEFI/Legacy ( UEFI Only )
                                     CSM Support  ( NO )
      ----------------------------------------------------------------------------------------------------------------------------------
       
      **   F1 to Enter Bios - F12 for Boot Menu
      ***   Delete the EFI Folder in your Installation USB and replace it with the Attached one 
      ****   Generate new serial for SMBIOS MacBook Pro 13.1
      *****    If your CPU is XEON then go to Config.plist CPU Section and Add 0x05A5 under Type ( Fix for Unknown CPU )
      ****** You can delete boot-args "brcmfx=1 & brcmfx-driver=#a" if you want , I used it in my case with 1820A card to fix wifi issue
      ******    After you successfully installed OS , now Copy the same EFI Folder to your main EFI Boot Disk Partition 
      *******    Now install all the attached KEXTS to "Library / Extensions"  using Hackintool.app or by any method and rebuild cache and repair permissions
      ********    Check and compare the KEXTS in Library/ Extensions and Delete the repeated ones from Clover / Kexts / Others ( Important don't duplicate the same kexts here and there )
       
      FYI : LiluFriend.kext include ( Lilu , WhatEverGreen, AppleALC , AirportBrcmFixup ) All In One 
       
       
       
      You are Done 
      ---------------------------------------------------------------------------------------------------------------------------------
       
      What is working :
       
      - 4K Intel HD P530 2048 MB 
      - AUDIO
      - CAMERA 
      - ALL USB 3 PORTS , NO THUNDERBOLTS 
      - Keyboard and TouchPad 
      - Battery indicator 
      - Display Brightness 
      - Sleep 
      - DSDT has been patched , USB Ports modified only to MacBookPro 13.1
       
                   See the Screen Shot 
       
      Important Notice For Future OS Updates Installations : 
       
      To avoid Kernel Panic during install any future updates process please remove ( FakeSMC.kext and LiluFriend.kext ) from Library/Extensions directory to Clover / Kexts / Others .
      After update process finish put them back to Library/Extensions and delete them from clover . I hope this is clear enough
      ---------------------------------------------------------------------------------------------------------------------------------
       
      Happy Hackintosh , Let me know if you have any issue or difficulties during installation or later , I will try to help you
       
      EFI.zip
      kexts.zip

    • By Drovosek
      Unfortunately this is not my PC, I just decided to share the found config successful installation.
      https://vk.com/photo-12954845_457251886
       
      Hardware:
      OS X 10.15.0 Beta 2 
      CPU Intel XEON E5 2650 v3
      MB MSI X99A RAIDER
      AMD Radeon RX VEGA 56 video card
      Kingston HyperX Fury DDR4 2133Mhz 20gb memory
      Crucial 4gb 2400Mhz
      Sound E-MU 0202, Alc892 and AMD DisplayPort Audio
      Intel Gigabit LAN network
      WI-FI Broadcom BCM94360CS2
      BCM20702 BT (trackpad and keyboard work in the BIOS)
      BP Enermax Platimax 1000W
      AirDrop works.
      SSD NVMe Reina 480gb
      Samsung 850 Pro 120gb
      Dell U2713H monitor
      USB 15 ports are registered manually. 3.0 works. 
      Services usual, SpeedStep instituted through kekst. 
      Sleep is unstable.
       
      EFI: https://vk.com/doc207634019_512032268
       

      EFI.zip
×