Hello. I am often enquired about my Acer Aspire 8942G. So I decided to create a topic about this deal.
I use MBR and Mavericks is installed on the second hard disk, which have two partitions. One with Mavericks, the second with NTFS-partitions.
I prefer to install(restore) mac with the help of R-drive image under Windows. But it don't means that you must do so either. Do as you prefer
Note. Usually people start with Chameleon. You should use only two extra kexts, namely FakeSMC and NullCPUPowerManager for the first start.
And use these keys at the Chameleon -v -f GraohicsEnabler=No
Necessary kexts(patched kext and hackintosh kext
Note; S/L/E means System/Library/Extensions I have written it as it occasionally confuses the beginners
Note 2; you can find driver for LAN and sound from previous system here
Graphics, DSDT and FaakeSMC, AppleHDA
1) This patched Framebuffer we use
Personality: AlouattaConnectorInfo count in decimal: 4Disk offset in decimal 5913920000000 02 00 00 00 40 00 00 00 09 00 00 00 10 00 00 04 - LVDS0000010 00 04 00 00 04 07 00 00 00 00 00 00 12 04 01 02 - DP0000020 00 08 00 00 04 02 00 00 00 00 00 00 11 02 02 01 - HDMI0000030 10 00 00 00 10 00 00 00 00 00 00 00 00 10 03 03 – VGA0000040 Plus you have to use GraphicsInjector or the best solution as I think is VideoBios within DSDT. Only with this method, "Display Sleep" works(I've already give the DSDT with that)
2) My dsdt is big, and it start up many of the equipment. I think it is enough had so as to improve something else, as it were. But you can suggest to me some correction.
For instance, some optimization and so on
Note, if your Acer doesn't boot with my DSDT, than it happens you use a little bit another model with small distinction, For example another processor such as Core i5 instead of i7. It happens because the addressing differs from mine at one place of the DSDT,
Find and correct it, on your DSDT. If you encounter this problem, write about here if you cannot cope with that on you own.
PS I have the DSDT from Acer Asoire 8942G which has Core i5, but I don't lay it out because it is old a little and I should finish it in this case.
I attached correct the Fake for our laptops, it emulates not only SMC, AppleHDAHardwareConfigDriver and ApppleGraphicsPowerManager(correct id) are being put right as well.
It also detects many sensors by means of HWSensors, the other sensors I wasn't be able to make it as it is super very hard but possible. You can read this topic just for the interest
4) See here what patches what made for AppleHDA
Settings of bootloaders. Chameleon, XPC, bareBoot and Clover
You can find settings of bootloader at the folder Extra_files
Note; you must past your serial number. You can use Chameleon Wizaed for it.
Note 2; With Chameleon you should make patch of all kexts manually, in Clover and bareboot these patches are writhen at their settings in order to not repatch drivers after each update.
Though you must replace AppleSmartBatteryManager after each update
Note 3, As you can see at the XPC I use all patches except for Graphics patch. For some reasons, Graphics patch doesn't work at xpc. Hope that developer of this bootloader will solve the problem soon. As a consequence, I make patch of AMD5000Controller manually with the help of hexedit.
That we replace on
These two files are necessary for VoodooPS2Controller, and should be founded in indicated folders
Here is edid, you can use DisplayProductID or DisplayNergeNub, Although being together, they mustn't hinder each other.
See more exactly here
Strugle with out-of-work DVDPlayed caused by BatteryKext
1) Glimmer on LDVS
2) Pops durings waking up with AppleHDA, it happens only in Mavericks
3) VoodooSDHC no longer works completely, at the Mavericks. At the Mountain Lion, it works very buggy.
4) Small spam at the kernel log made by the SmartBattery.
5) Some indicators. Indicator of wifi doesn't work completely. Touchpad indicator can be only switched on/off under Windows.
Long time no see guys!
As you can see I am not new user of Insanely and do not want to post in incorrect section, but I can not find any similiar topic at all. I,ve searched the forum and the web and I can't find a solution.
My question is that is there any possibility to install Mavericks 10.9.5 on external drive on the newest Macbook Pro 13 from 2018? I know that the Intel Coffee Lake is new generation of CPU's and there is no drivers in Mavericks system to run this CPU, but I was thinking about it alot and I decided to write here. Because if we can install all the newest OSX, macOS on older machines then maybe we can install older systems on newer builds?
P.S. If I wrote in incorrect topic then please move this thread to the right section, I will be grateful
I've been trying to install Mavericks 10.9, I know it's older now, but It's honestly the version I want to use, the specs of the PC are:
Asus P8H61-MX USB3
8GB DDR3 Memory
GTX 750 ti
I've been following this guide: https://www.insanelymac.com/forum/topic/280756-guide-the-all-in-one-guide-to-vanilla-os-x-including-chameleon-dsdt-for-beginners-updated-for-yosemite/
But, after booting, this is the error screen I get, any guidance on what Kexts, SMBios settings, etc. I need? I can tell I'm probably missing something here.
Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771 Install MacOS with Olarila Image, Step by Step, Install and Post Install
Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/ --Install Clover in USB stick UEFI mode https://sourceforge.net/projects/cloverefiboot/files/Installer/ --Replace Folder CLOVER INSTALLATION.zip --Install System and boot with USB STICK! --Install Clover in UEFI mode and replace with my folder Mavericks / Yosemite CLOVER Mavericks-Yosemite.zip El Capitan / Sierra CLOVER El Capitan-Sierra.zip --Reboot and activate video! Bingo! Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches! If you need DSDT edit... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=222606 -Run it, post files generate in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=222609 --DSDT My DSDT DSDT.Asus Z97M-PLUS.zip Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -EHCx -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -HDMI -ALS0 -SHUTDOWN -LAN -PNLF --SSDT Generate your SSDT Power Management, use ssdtPRGen Piker-Alpha https://github.com/Piker-Alpha run in terminal curl -o ~/ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh chmod +x ~/ssdtPRGen.sh sudo ~/ssdtPRGen.sh ssdtPRGen.command.zip
Clear NVRAM, Purge and Kextcache Olarila.command.zip stock coolerand Rio 40º --FakeSMC http://www.hwsensors.com/releases --Audio http://www.insanelymac.com/forum/topic/314406-voodoohda-289/ --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/ Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
Please help me with this 10.9.5 system. Motherboard: Gigabyte 965p-s3 rev3.3, gpu: Ati Radeon HD6450 (dvi/hdmi/vga).
Using any of the 3 ports on the 6450 (dvi, hdmi, vga), I see all the white letters on black background during boot but when they complete and it's time for the graphics to start I get a black screen and sometimes a restart after that. Using Clover 4411. Is there any way to get past this?