Jump to content
mac.nub

Dell Inspiron 6400 - Mac OS 10.4.7 (JaS) Working Install Guide

24 posts in this topic

Recommended Posts

Hey All,

 

I noticed alot of people were having trouble getting newer versions of Mac to run on Dell Inspiron 6400's, and managed to get it working today so decided to write a quick install guide, hope it works for you too and makes sense!

 

Please pre-install: VMWare (Server, Workstation... whichever you want), Daemon Tools (Or equvilant!)

 

Note: It *may* be possible to do a complete native install this way... but I haven't tried a complete native install... only through VMWare actually installing to a Physical Partition (So it's runs natively!)

 

Step 1: Setup WMWare as Follows:

Memory (whatever your max recommended is)

Vitrual Hard Drive... purely needed to get the VM to boot from the CD for some reason

Hard Drive linked to physical pre-formatted HFS+ partition

CDROM - IDE (Auto detect)

Ethernet Host-only (Stops registration being submitted at the end)

Audio (auto detect)

Virtual Processors: 1 make sure this is NOT 2!

Host OS: Windows NT NOT FreeBSD otherwise you will get a kernel panic error!

 

Step 2: Install Daemon Tools, mount ISO

 

Step 3: Edit .vmx file (My Documents/My Virtual Machines/your_vmname/your_vmname.vmx), add paevm="true" on the last new line, Start the Virtual Machine

 

Stupidity note: Replace your_vmname with the name of the Virtual Machine.

 

Step 4: At OS Boot options enter the following: -v -x platform=x86PC

 

Step 5: Continue though setup until the "Welcome to the JaS 10.4.7 Installer" screen appears.

 

Step 6: Click "Utilities" in the menu then choose "Disk Utilities" go to erase, select RIGHT disk, click erase, click OK wait for erasing and partitioning to be completed...

 

Step 7: Quit Disk Utility, Continue with Setup, Select Disk when prompted (I chose 10.7GB), then skip the disk check

 

Step 8: Make sure to click customise on Install type and select the JaS.OS.10.4.7.Patches options that are RELEVANT to your PC/Laptop - don't tick all of them - use the arrow to expand your options, make sure to at LEAST instal Jas Intel 10.4.7 Update Combo and the SSE3 Update Patch, feel free to untick Language Translations and Additional Fonts, along with any printer drivers you don't want installed.

 

Sit back and relax while mac is installed (it takes around 10 mins on my Laptop).

 

Step 9: When it asks you to reboot... SHUT DOWN the Virtual Machine instead of rebooting. Shut down windows, then NATIVELY boot into Mac, no need to use VMWare, it'll work fine natively now the install is out of the way! - use the chain0 file method with boot.ini... search the forums if you don't know what i'm on about. note: may crash when trying to setup a network card, if so simpily select "My computer does not connect to the internet" and click continue.

 

Step 10: Fill in the details required for registration etc... then finally you boot into Mac... and it works!

 

Hope this helps! :blink:

Guide Revisions: 5

Share this post


Link to post
Share on other sites
Advertisement
Hey All,

 

I noticed alot of people were having trouble getting newer versions of Mac to run on Dell Inspiron 6400's, and managed to get it working today so decided to write a quick install guide, hope it works for you too and makes sense!

 

Please pre-install: VMWare (Server, Workstation... whichever you want), Daemon Tools (Or equvilant!)

 

Note: It *may* be possible to do a complete native install this way... but I haven't tried a complete native install... only through VMWare actually installing to a Physical Partition (So it's runs natively!)

 

Step 1: Setup WMWare as Follows:

Memory (whatever your max recommended is)

Vitrual Hard Drive... purely needed to get the VM to boot from the CD for some reason

Hard Drive linked to physical pre-formatted HFS+ partition

CDROM - IDE (Auto detect)

Ethernet Host-only (Stops registration being submitted at the end)

Audio (auto detect)

Virtual Processors: 1 make sure this is NOT 2!

Host OS: Windows NT NOT FreeBSD otherwise you will get a kernel panic error!

 

Step 2: Install Daemon Tools, mount ISO

 

Step 3: Edit .vmx file (My Documents/My Virtual Machines/your_vmname/your_vmname.vmx), add paevm="true" on the last new line, Start the Virtual Machine

 

Stupidity note: Replace your_vmname with the name of the Virtual Machine.

 

Step 4: At OS Boot options enter the following: -v -x platform=x86PC

 

Step 5: Continue though setup until the "Welcome to the JaS 10.4.7 Installer" screen appears.

 

Step 6: Click "Utilities" in the menu then choose "Disk Utilities" go to erase, select RIGHT disk, click erase, click OK wait for erasing and partitioning to be completed...

 

Step 7: Quit Disk Utility, Continue with Setup, Select Disk when prompted (I chose 10.7GB), then skip the disk check

 

Step 8: Make sure to click customise on Install type and select the JaS.OS.10.4.7.Patches option, feel free to untick Language Translations and Additional Fonts

 

Sit back and relax while mac is installed (it takes a while - around 20 mins on my Laptop)...

 

Step 9: When it asks you to reboot... SHUT DOWN the VPC instead or rebooting... shut down windows, then boot into mac - use the chain0 file method with boot.ini... search the forums if you don't know what i'm on about, again use the startup paramaters: -v -x platform=x86PC

 

Step 10: Fill in the details required for registration etc... then finally you boot into Mac... and it works!

 

Hope this helps! :blink:

haha through vmware huh?

well my laptop boots natively in OSX. No vmware unless they release fusion to run xp from osx and not viceversa.

Share this post


Link to post
Share on other sites
haha through vmware huh?

well my laptop boots natively in OSX. No vmware unless they release fusion to run xp from osx and not viceversa.

 

The install is through VMWare, the OS actually boots natively.

Share this post


Link to post
Share on other sites

Why does every guide seem to demand using Daemon Tools for mounting the ISO for VMWare? VMWare can mount an ISO directly to the virtual CD/DVD drive. Just seems like extra effort.

Share this post


Link to post
Share on other sites

Nice guide there, Macnub. :) I'm wondering if a USB Soundblaster Live might be a good solution to the perenial sound problem. Anyone out there have much experience of it?

Share this post


Link to post
Share on other sites
Nice guide there, Macnub. :happymac: I'm wondering if a USB Soundblaster Live might be a good solution to the perenial sound problem. Anyone out there have much experience of it?

 

Sound Blaster USB does work. I didn't need any additional kexts to make it work, it was plug and play for me.

Share this post


Link to post
Share on other sites

Thanks Davesworld, that is good to know. :happymac:

 

Folks, what is the screen quality like, did anyone go for the Truelife option? Do both cores in the processor work? What is the battery life when running OS X, under light load and under heavy load? Also, which battery do you have, the six cell or the nine cell?

Share this post


Link to post
Share on other sites

Detosx,

 

I'm currently running OSX 10.4.8 on a Dell 6400. As far as I can tell, resolution is locked at 1024x768, no 1280x800 available, can only use 1 core, LAN works, audio & wireless not work, not sure about the battery life as I always use external power.

Share this post


Link to post
Share on other sites

O.K. This is very simple:

 

I didn't want dual boot (just OS X) on my Dell Inspiron 6400 so I did this:

 

1- Found a Linux Install CD (ubuntu is perfect, knoppix too)

2- Made 1 partition and made it active. shutdown.

3- Booted using Jas 10.4.8 + diskutil fix iso. (defiant fix)

4- In DiskUtil Made 1 HFS+ Partition

5- Installed OSX with Intel and support options.

6- Replaced /system/Library/IONetworkingFamily.kext from the one in 10.4.6

 

Get it here-> http://forum.insanelymac.com/index.php?act...ost&id=5785

 

7- In Applications/Utilities/DiskUtility, Repaired permissions, restarted. DONE!

 

OS X 10.4.8 running in 30 mins!--> I think it's possible to skip step #1 and #2 , but I didn't try.

 

I got 1200x800 QE/CI. Video is GREAT with no isssues.

 

Audio is WORKING !!! (Sigmatel 9200) ---> HDAPatcher to use is this one:

 

http://forum.insanelymac.com/index.php?act...ost&id=8011

 

 

The "linux codec dump" is here --> http://forum.insanelymac.com/index.php?act...ost&id=7907

 

 

Just drag this codec dump onto the Patcher icon (onced you unzipped it!), and reboot!

 

- Wireless: WORKING with Dell 1390 Wireless, NOT WORKING with Intel 3945ABG---> sell the Intel and get a 10$ Dell Wireless 1490 on any site like eBay or others!

 

Thanks to everyone who guided me! Hope this can help people out!

 

 

Msg-me if sound is working for you!

 

 

Good Luck to all!

Edited by sonarMTL

Share this post


Link to post
Share on other sites

Was trying to install "JaS 10.4.8 SSE3 SSE2" to my Inspiron 6400, with specs:

- Intel Core Duo T2500 @ 2.0 GHz

- 2 GB RAM

- 120 GB SATA Drive

- ATI Mobility Radeon x1400 (256 MB)

- 1680x1050 LCD

 

Made single partition for OSX.

- With ATI1x00 support options was not able to get past Apple logo screen (vertical bars on display, etc).

- With ATI1x00 disabled (and all install options off except Intel support) was able to boot and log into Mac OS. No networking (Broadcom/Intel WiFi) or sound (SigmaTel) though.

 

After replacing IONetworkingFamily.kext mentioned above and rebooting I was getting lock-ups almost immediately after logging into desktop. At that point got tired and pissed off and installed XP. :)

 

Offtopic: On a side note, as a long-time Windows user, who recently bought Mac Mini (to use it with flat-panel TV) I must say that I'm really impressed by OS X.

 

Used Windows Vista since RTM release - it's just an OS X rip. Done really badly and waaay overbloated.

Planning to sell this laptop and get myself MacBook. :2cents:

Share this post


Link to post
Share on other sites

Hello.

 

My laptop is a Dell inspiron 6400. Coreduo t2400, 2gb Ram, x1400 128mb, dell wireless 1390 and sigmatel audio.

 

I can´t install Mac os x, I´ve tried JaS.10.4.8.AMD.Intel.9SSE2.SSE3.iso, JaS.10.4.8.AMD.Intel.SSE2.SSE3.iso+ ppf1 and JaS.10.4.8.AMD.Intel.SSE2.SSE3.iso+ppf1+ defiant diskutil fix but my sata disk can´t be mounted ( It is showed int diskutil but can´t be mounted. I don´t know why. Can anybody help me?

 

thanks

Share this post


Link to post
Share on other sites
O.K. This is very simple:

 

I didn't want dual boot (just OS X) on my Dell Inspiron 6400 so I did this:

 

1- Found a Linux Install CD (ubuntu is perfect, knoppix too)

2- Made 1 partition and made it active. shutdown.

3- Booted using Jas 10.4.8 + diskutil fix iso. (defiant fix)

4- In DiskUtil Made 1 HFS+ Partition

5- Installed OSX with Intel and support options.

6- Replaced /system/Library/IONetworkingFamily.kext from the one in 10.4.6

 

Get it here-> http://forum.insanelymac.com/index.php?act...ost&id=5785

 

7- In Applications/Utilities/DiskUtility, Repaired permissions, restarted. DONE!

 

OS X 10.4.8 running in 30 mins!--> I think it's possible to skip step #1 and #2 , but I didn't try.

 

I got 1200x800 QE/CI. Video is GREAT with no isssues.

 

Audio is WORKING !!! (Sigmatel 9200) ---> HDAPatcher to use is this one:

 

http://forum.insanelymac.com/index.php?act...ost&id=8011

The "linux codec dump" is here --> http://forum.insanelymac.com/index.php?act...ost&id=7907

Just drag this codec dump onto the Patcher icon (onced you unzipped it!), and reboot!

 

- Wireless: WORKING with Dell 1390 Wireless, NOT WORKING with Intel 3945ABG---> sell the Intel and get a 10$ Dell Wireless 1490 on any site like eBay or others!

 

Thanks to everyone who guided me! Hope this can help people out!

Msg-me if sound is working for you!

Good Luck to all!

 

Sound didnt work for me.

 

The codec dump shows up as an html, but I found it through the b130 guide. You can copy and paste the text to a text editor and name it Stac9200.txt.

Share this post


Link to post
Share on other sites

Dell Inspiron 6400 - Core Duo T2400 | 2GB Ram | 100GB Hdd sata | x1400 256MB | Sigmatel 9220 | Dell wireless 1390 |

 

All ok but not native resolution and cpus=1, but the rest all perfect. Kernel 8.8.1. Jas version.

Share this post


Link to post
Share on other sites
Why does every guide seem to demand using Daemon Tools for mounting the ISO for VMWare? VMWare can mount an ISO directly to the virtual CD/DVD drive. Just seems like extra effort.

 

It's because VMWare can not handle the OS X DVD ISO format properly :) - if you try that you'll get read errors!

Share this post


Link to post
Share on other sites

Dudes,

 

everytime I try to install my Sigmatel 9200 it gives me the "Hold down the powerbutton blabla "message.

 

With the codec-bump you linked here the patcher opened and I saw a line of text, with ther dumps that line didn't even appear...

 

Can sb help me on this?

Share this post


Link to post
Share on other sites
Dudes,

 

everytime I try to install my Sigmatel 9200 it gives me the "Hold down the powerbutton blabla "message.

 

With the codec-bump you linked here the patcher opened and I saw a line of text, with ther dumps that line didn't even appear...

 

Can sb help me on this?

Sorry to hear that, what version of Mac are you trying to do that on? I used Version 10.4.8 with the latest Semthex kernel, and 10.4.9, both worked fine on my Inspiron 6400.

Share this post


Link to post
Share on other sites
Sound didnt work for me.

 

The codec dump shows up as an html, but I found it through the b130 guide. You can copy and paste the text to a text editor and name it Stac9200.txt.

 

:) Made 1 partition and made it active. What do You mean, please: fat32/26, empty, ext2..3...how big... purpose. THX

Share this post


Link to post
Share on other sites

Hi guys,

I tried this manual too, but at the disk utility i only can select the Vmware harddisk and not the harddisk of my laptop.

Does anyone know how to fix this??

 

Thx,

Share this post


Link to post
Share on other sites

Im having sound issues with my 6400 too, when i open the HDA patcher i get a message making me restart my pc its kinda anoying!!!! any way to fix this ?

Share this post


Link to post
Share on other sites

mac.nub

Laptop: Inspiron 6400 - Core 2 Duo T5600 1.83GHz, 2GB 667Mhz DDR2 RAM, Seagate Momentus 7200.2 (160GB, 7200 RPM) HDD - Win XP Pro - 50GB Partition, Mac OS X v10.4.10 - 100GB Partition - 10.4.9 Uphuck v1.3 /w network fix -> Official 10.4.10 (8.10.1) - Microsoft UK Keyboard Layout

Hey..

Judging by your signature, not only did you get MacOS on 6400, but OS10? All that through VMWare, or is tere a method to do it directly? To tell the truth, the VMWare way seems much to compliacted for me. If I format my harddrive and boot from the Jas 10.4.8 DVD, will i be able to install MacOS?

 

my specs are:

c2d t7200 (2ghz)

ati x1400

1gb ram

dell wireless

bradcom

sigmatel

120gb sata.

Share this post


Link to post
Share on other sites

Installed JaS 10.4.8, then manually upgraded with JaS 10.4.9 Update and 10.4.10 Update. Plus ran System Updates. So far so good.

 

Can't change resolution on ATI 1300 wide screen. No sound on SigmaTel 9200 (ran AppleAzalia - system says HD Audio Out, but still can't hear a thing).

 

Using cpu=1 runs smoothly. Wireless 1390 runs great (used a guide to turn it on, can get if anyone needs it).

 

Used Taruga's AppleHDA_Patcher v1.11 and this codec:

 

Codec: SigmaTel STAC9200
Address: 0
Vendor Id: 0x83847690
Subsystem Id: 0x102801bd
Revision Id: 0x102201
Default PCM: rates 0x7e0, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0xd0401: Stereo
 Power: 0x0
Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo
 Power: 0x0
 Connection: 1
    0x0a
Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital
 PCM: rates 0x160, bits 0x0e, types 0x5
 Connection: 1
    0x08
Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital
 PCM: rates 0x1e0, bits 0x0e, types 0x5
Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Node 0x07 [Audio Selector] wcaps 0x300901: Stereo
 Connection: 3
    0x02* 0x08 0x0a
Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital
 Pincap 0x0810024: IN
 Pin Default 0x40f000f0: [N/A] Other at Ext N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x00:
 Power: 0x0
Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital
 Pincap 0x0810: OUT
 Pin Default 0x40f000f1: [N/A] Other at Ext N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x00:
 Connection: 2
    0x05* 0x0a
Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
    0x0c
Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
 Amp-Out caps: N/A
 Amp-Out vals:  [0x19 0x19]
 Connection: 1
    0x07
Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
 Amp-Out vals:  [0x00 0x00]
 Connection: 5
    0x10* 0x0f 0x0e 0x0d 0x12
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x083f: IN OUT HP
 Pin Default 0x0421101f: [Jack] HP Out at Ext Right
   Conn = 1/8, Color = Black
 Pin-ctls: 0x00:
 Connection: 1
    0x0b
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x083f: IN OUT HP
 Pin Default 0x90170310: [Fixed] Speaker at Int N/A
   Conn = Analog, Color = Unknown
 Pin-ctls: 0x40: OUT
 Connection: 1
    0x0b
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x0837: IN OUT
 Pin Default 0x40f000f2: [N/A] Other at Ext N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x20: IN
 Connection: 1
    0x0b
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x081737: IN OUT
 Pin Default 0x04a11020: [Jack] Mic at Ext Right
   Conn = 1/8, Color = Black
 Pin-ctls: 0x24: IN
 Connection: 1
    0x0b
Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out
 Amp-Out caps: N/A
 Amp-Out vals:  [0x00]
 Pincap 0x0810: OUT
 Pin Default 0x40f000f3: [N/A] Other at Ext N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x00:
 Connection: 1
    0x13
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
 Pincap 0x0820: IN
 Pin Default 0x40f000f4: [N/A] Other at Ext N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x20: IN
Node 0x13 [Audio Mixer] wcaps 0x200100: Mono
 Connection: 1
    0x07
Node 0x14 [beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
 Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
 Amp-Out vals:  [0x00]

 

and here's what I got back:

 

AppleHDA Patcher - 2006 Taruga v1.11

_______________________________________________________

Codec : Binary file (standard input) matches

Vendor Id : Binary file (standard input) matches

Subsystem Id : Binary file (standard input) matches

_______________________________________________________

 

 

* Detected unsupported Binary Codec

Exiting... :)

 

 

Anybody has any idea how I can get my speakers sound to work? plz?

Share this post


Link to post
Share on other sites
Installed JaS 10.4.8, then manually upgraded with JaS 10.4.9 Update and 10.4.10 Update. Plus ran System Updates. So far so good.

 

Can't change resolution on ATI 1300 wide screen. No sound on SigmaTel 9200 (ran AppleAzalia - system says HD Audio Out, but still can't hear a thing).

 

Using cpu=1 runs smoothly. Wireless 1390 runs great (used a guide to turn it on, can get if anyone needs it).

 

Used Taruga's AppleHDA_Patcher v1.11 and this codec:

 

Codec: SigmaTel STAC9200
Address: 0
Vendor Id: 0x83847690
Subsystem Id: 0x102801bd
Revision Id: 0x102201
Default PCM: rates 0x7e0, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0xd0401: Stereo
 Power: 0x0
Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo
 Power: 0x0
 Connection: 1
    0x0a
Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital
 PCM: rates 0x160, bits 0x0e, types 0x5
 Connection: 1
    0x08
Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital
 PCM: rates 0x1e0, bits 0x0e, types 0x5
Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Node 0x07 [Audio Selector] wcaps 0x300901: Stereo
 Connection: 3
    0x02* 0x08 0x0a
Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital
 Pincap 0x0810024: IN
 Pin Default 0x40f000f0: [N/A] Other at Ext N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x00:
 Power: 0x0
Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital
 Pincap 0x0810: OUT
 Pin Default 0x40f000f1: [N/A] Other at Ext N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x00:
 Connection: 2
    0x05* 0x0a
Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
    0x0c
Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
 Amp-Out caps: N/A
 Amp-Out vals:  [0x19 0x19]
 Connection: 1
    0x07
Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
 Amp-Out vals:  [0x00 0x00]
 Connection: 5
    0x10* 0x0f 0x0e 0x0d 0x12
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x083f: IN OUT HP
 Pin Default 0x0421101f: [Jack] HP Out at Ext Right
   Conn = 1/8, Color = Black
 Pin-ctls: 0x00:
 Connection: 1
    0x0b
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x083f: IN OUT HP
 Pin Default 0x90170310: [Fixed] Speaker at Int N/A
   Conn = Analog, Color = Unknown
 Pin-ctls: 0x40: OUT
 Connection: 1
    0x0b
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x0837: IN OUT
 Pin Default 0x40f000f2: [N/A] Other at Ext N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x20: IN
 Connection: 1
    0x0b
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x081737: IN OUT
 Pin Default 0x04a11020: [Jack] Mic at Ext Right
   Conn = 1/8, Color = Black
 Pin-ctls: 0x24: IN
 Connection: 1
    0x0b
Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out
 Amp-Out caps: N/A
 Amp-Out vals:  [0x00]
 Pincap 0x0810: OUT
 Pin Default 0x40f000f3: [N/A] Other at Ext N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x00:
 Connection: 1
    0x13
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
 Pincap 0x0820: IN
 Pin Default 0x40f000f4: [N/A] Other at Ext N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x20: IN
Node 0x13 [Audio Mixer] wcaps 0x200100: Mono
 Connection: 1
    0x07
Node 0x14 [beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
 Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
 Amp-Out vals:  [0x00]

 

and here's what I got back:

 

AppleHDA Patcher - 2006 Taruga v1.11

_______________________________________________________

Codec : Binary file (standard input) matches

Vendor Id : Binary file (standard input) matches

Subsystem Id : Binary file (standard input) matches

_______________________________________________________

 

 

* Detected unsupported Binary Codec

Exiting... :(

 

 

Anybody has any idea how I can get my speakers sound to work? plz?

 

I have this same problem. I've used multiple codecs and none work. HELP!!! Thanks

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×