Jump to content
Sign in to follow this  
Followers 0
dark_hacker

Problem with internal screen on intel hd 4000

9 posts in this topic

Recommended Posts

I did in my dsdt application of the RehabMan patch for brightness correction in AppleBacklight.kext but what happens and the brightness works but my internal screen of the laptop stays with the image with a transparent white background barely can see the image, but I do the shine and it works and it's just a problem in the image, I do not know why this happens, thanks.

CLOVER.zip

Share this post


Link to post
Share on other sites
Advertisement

which device is this ?

 

which platform-id and smbios do you use ?

 

ID do dispositivo: 0x0166

ID da revisão: 0x0009

 

0x01660003 platform-id

 

smbios Macbook air 5,2

Share this post


Link to post
Share on other sites

with device i meant the whole notebook but anyways :P

 

i run the hd4000 in my elitebook 8470p just fine with platform id of 0x01660003 + lvds Capriframebuffer patch mbp9,2 smbios

Share this post


Link to post
Share on other sites

with device i meant the whole notebook but anyways :P

 

i run the hd4000 in my elitebook 8470p just fine with platform id of 0x01660003 + lvds Capriframebuffer patch

 

what is the patch that lvds for Capriframebuffer patch how can I do and that I have patch on clover but for hdmi audio so am I missing this one?

Share this post


Link to post
Share on other sites

see this config: https://github.com/dreadkopp/8470p_10.13.xthis on is mine for the elitebook.

 

 

see that platform-id is set in dsdt.

 

lvds framebuffer patch is the first patch in the kextpatches in the config.plist

 

 

I tried anyway on the internal screen of the same problem I will show a photo of the problem in hdmi works perfectly I do not know if my clover at configuration level is the most correct if they can adjust my config to the most correct because I am using This is taken from the internet because I do not understand much of it.

post-674772-0-99305200-1512679568_thumb.jpg

Share this post


Link to post
Share on other sites

That image looks mega weird.

 

Acceleration works though?

 

Check with maybe http://resxtreme.com/if color depth is set to corret level

 

yes I have full acceleration on the external monitor by hdmi the image of the perfect on the internal monitor and that is so I do not understand, one thing I had acpibacklight.kext installed and until today it started on external monitor well today and that when I turned on the computer it was so removed acpibacklight.kext and I'm using native applebacklight.kext I do not know why it worked and today it was like this

 

Look, I saw that your clover config is configured and you do not use DSDT, you can have a look at my eyes and configure my config in the correct way for the operation. I've already been told that many things are activated that you can not do do that ?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      Install MacOS with Olarila Image, Step by Step, Install and Post Install  
      https://www.olarila.com/topic/5794-hackintosh-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
          First... If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generated in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609  Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Paste my EFI folder into EFI partition  EFI GA H110M-S2.zip     --Install Sierra/High Sierra and boot into system!   Post Installation   --Paste my EFI folder into EFI partition  EFI GA H110M-S2.zip     --Reboot and activate video!   -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   --DSDT My DSDT with Skylake patches DSDT.GA H110M-S2.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By kylon
      A big thanks to wegface for teaching me a lot of things.
       
       
      Tested on Catalina 10.15.4 and Clover EFI 5104 (Catalina Patcher)
       
      Not Working:
      - realtek sd card reader (pm me if you have a fix)
       
      Notes:
      **CPU patches are disabled, if you are using a locked BIOS you must enable them**
       
      Clover EFI:
      - Install it in UEFI Mode and change your hdd partition table to GPT.
      - You will be able to install ANY OS in EFI mode, even if this pc does not support EFI at all! (No guide available for this)
       
      You will need:
      My unlocked BIOS (OPTIONAL) (here) Latest Clover config from CCE Bank (here) (asus k53sj-kylon) Rehabman Voodoo PS2 Controller (here) acidanthera AppleALC (here) acidanthera Lilu (here) acidanthera VirtualSMC (here) acidanthera SMCBatteryManager (here) acidanthera SMCLightSensor (here) acidanthera WhateverGreen (here) Mieze Realtek RTL8111 (here)
    • By hacking2apple
      It's been known that there is indeed support for VGA in Coffe Lake and that support for prior iGPUs was deprecated as the VGA port was removed since Sierra. However, using port patches in Devices Properties (Open Core), I made the VGA port to work again with graphics acceleration.
      But there's a catch, the port is glitchy. Once macOS displays the accounts, you can see the Enter Password box with the blur effect. But after some seconds, the whole display will turn to another color (depends on the background). I'm not sure why that happens.
      I would suggest learning what are Ports, Connectors, Indexes, Types, and BusIDs before continuing, otherwise, you would get lost.
      These are the patches that are supposed to enable the VGA port according to the Whatevergreen Intel guide:
      06020000 02000000 30000000 // Option 1 06020000 01000000 30000000 // Option 2 None of those ports seem to work. The first problem is that the Index is 6, which does not make any sense as the Azul framebuffer only supports up to 3 Indexes (software ports). So we first have to change the Index for the VGA port on your motherboard, which is 2 (physical port is 0x06)) for me.
      So that means that the target port is the Index 2, which is 02040A00 00040000 87000000.
      bus-id 4 is for DP so we would change that to 2, which is VGA. That is according to what Hackintool says. I also proved other bus-ids but none of the other ones seem to work.
      I have no idea what pipe does so I just type zeros.
      I think pipe is basically another way group ports. So later I changed that to 10, which is 0A in hex. That means pipe remains the same as it was originally.  02020A00 01000000 87000000
      The next part is the connector-type, for which I used 02000000.
      I tried the VGA connector-types that Hackintool suggested but I noted some weird differences whereas 02000000 and 01000000 seem to work okay.
      Finally, I don't know what flags do so I tried with 30000000 and 87000000. The only difference is that with 87000000 I'd gain more seconds before the whole screen turns to another color.
       
      This is the final configuration:
      AAPL,ig-platform-id <0300220D> framebuffer-con1-alldata <02020A00 0100000 87000000> framebuffer-con1-enable <01000000> framebuffer-patch-enable <01000000> This is the video proof:
      https://i.imgur.com/bd6jtFh.mp4
       
      macOS Catalina 10.15.3
      Kexts: Whatevergreen 1.3.7
      Boot loader: OpenCore 0.5.6
      PC Specs:
      Intel Core i5 4460
      Intel HD Graphics 4600
      ECS H81H3-M4
      4GB RAM DDR3
      bd6jtFh.mp4
    • By DoZe
      Hi :0)
       
      Hope As usual a perfect matching DSDT for this good Laptop.
       
      Regards, Ray
       
       
      SendMeStudiMac.zip
    • By MaLd0n
      --Donations via PayPal--
      https://tinyurl.com/r2bvzm7
       
      --Original Topic--
      https://www.olarila.com/topic/6874-olarila-hackbook-lenovo-ideapad-s145-mojave-catalina-full-dsdt-patches/
       

       
      -Perfect HackBook, HDMI Audio/Video, Bluetooth, AirPlay, Sleep, Lid Sleep, Auto Sleep, Audio, etc!
      -Wifi card has been replaced with Dell DW1560!
      -I'm using a S145-15IWL Model with Intel Core i5 8265u / Intel UHD Graphics 620
      -Update bios/uefi to last version
       
      --Installation--
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Clover Folder--
      Just paste EFI folder inside EFI partition
      https://www.olarila.com/files/Clover.Folder/Lenovo IdeaPad S145.zip
      Notebooks with ELAN trackpad use it with my folder above
      IdeaPad S145 ELAN.zip
       
      Bluetooth Broadcom
      Bluetooth Broadcom.zip
       
      CPUFriend for i5-8265U
      CPUFriend i5-8265U.zip
       
      --Full DSDT Patches--
      -My DSDT
      DSDT Lenovo IdeaPad S145.zip
       
      This DSDT work on S145-14IWL, S145-15IWL, V14-IWL, V15-IWL models
      -Patches
      -FIX ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 11 ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PRWs -_DSMs -PNLF -BRIGHTNESS KEYS -I2C -NATIVE USB -ARPT -GFX0 -DTGP -kUSBCompanionIndex -io-device-location -FULL RENAMED DEVICES   --IGPU Patch--
      Video solution with HDMI Audio and Video
      <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,GfxYTile</key> <data> AQAAAA== </data> <key>AAPL,ig-platform-id</key> <data> CQClPg== </data> <key>device-id</key> <data> pT4AAA== </data> <key>enable-hdmi20</key> <data> AQAAAA== </data> <key>framebuffer-con0-alldata</key> <data> AAAIAAIAAACYAAAA </data> <key>framebuffer-con0-enable</key> <integer>1</integer> <key>framebuffer-con1-alldata</key> <data> AQEJAAAIAADHAQAA </data> <key>framebuffer-con1-enable</key> <integer>1</integer> <key>framebuffer-con2-alldata</key> <data> AgYKAAAEAADHAQAA </data> <key>framebuffer-con2-enable</key> <integer>1</integer> <key>framebuffer-fbmem</key> <data> AACQAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-stolenmem</key> <data> AAAwAQ== </data> <key>framebuffer-unifiedmem</key> <data> AAAAgA== </data> <key>hda-gfx</key> <string>onboard-1</string> <key>model</key> <string>Intel Corporation, Cannon Point-LP Iris Plus Graphics 655</string> </dict>   --Native USB Fix for Notebooks - No Injector/Kext Required--
      https://www.olarila.com/topic/6878-guide-native-usb-fix-for-notebooks-no-injectorkext-required/
      https://www.olarila.com/topic/6181-guide-native-usb-fix-for-desktops-no-injectorkext-required-skylake/
       
       
      -ScreenShots

































      -Links
       
       
      Clover https://github.com/CloverHackyColor/CloverBootloader
      AirportBrcmFixup.kext https://github.com/acidanthera/AirportBrcmFixup
      AppleALC.kext https://github.com/acidanthera/AppleALC
      Brcm Bluetooth https://github.com/acidanthera/BrcmPatchRAM
      Lilu.kext https://github.com/acidanthera/Lilu
      SystemProfilerMemoryFixup.kext https://github.com/Goldfish64/SystemProfilerMemoryFixup
      VirtualSMC.kext https://github.com/acidanthera/VirtualSMC
      VoodooI2C.kext https://github.com/alexandred/VoodooI2C
      VoodooPS2Controller.kext https://github.com/acidanthera/VoodooPS2
      WhateverGreen.kext https://github.com/acidanthera/WhateverGreen
      MaciASL - https://github.com/acidanthera/MaciASL
      acpica - https://github.com/acpica/acpica
      AptioMemoryFix.efi https://github.com/acidanthera/AptioFixPkg
      ApfsDriverLoader.efi https://github.com/acidanthera/AppleSupportPkg
      HFSPlus.efi https://github.com/JrCs/CloverGrowerPro/blob/master/Files/HFSPlus/X64/HFSPlus.efi?raw=true
      Hackintool https://github.com/headkaze/Hackintool
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
       
      We're all here to have fun and learn from each other!
×