Jump to content
Slice

RadeonMonitor problems

128 posts in this topic

Recommended Posts

The thread splitted from HWSensors3.
 
Tools to testing Radeon state.
Load RadeonPCI.kext  
RadeonPCI.kext.zip
 
How to load

sudo chown -R root:wheel ~/Downloads/RadeonPCI.kext
sudo chmod -R 755 ~/Downloads/RadeonPCI.kext
sudo kextutil -v ~/Downloads/RadeonPCI.kext

and use RadeonDump utility
RadeonDump1.zip
 
Commands to see temperature
Polaris
./RadeonDump1 -n 6b0,c0300014

SeaIsaland

./RadeonDump1 -n 200,c0300014
 
Old families
./RadeonDump1 -r 714,7f4
 
Other possible methods to find a register for temperature
./RadeonDump1 -n 6b0,c0300e0c
./RadeonDump1 -n 6b0,1c5
./RadeonDump -n 6b0,d8200ca4
./RadeonDump -r 59800,59810
./RadeonDump -r 678,680


 
 
 
01.12.2017
Latest solution RadeonMonitor.kext here
works for RX 460,480,580
not works for HD7790, R9 290X?

 

06.12.2017

Here works also with HD7790, R9 290X

 

14.12.2017

Support VEGA here

 

13.12.2017

Version for test modern cards

RadeonPCI5.kext.zip

Share this post


Link to post
Share on other sites
Advertisement

MSI X79 + E5 2650 v2

2X Asus matrix 290x

El Capitan 10.11.4

 

https://www.dropbox.com/s/yqpdsal9gg36yp1/Zrzut%20ekranu%202016-03-25%20o%2019.15.32.png?dl=0

 

in Clover kext 10.11 folder instaled FakeSMC ver 6.18-313-g671f31c.1707 and ACPI CPU LPC plug in. 

And your RadeonMonitor.kext. 

This is the reason. My RadeonMonitor is incompatible with FakeSMC 6.***. It must be used with FakeSMC 3.4.1. Link to HWSensors3 in my signature.

Share this post


Link to post
Share on other sites

OK. I will try. 


This is the reason. My RadeonMonitor is incompatible with FakeSMC 6.***. It must be used with FakeSMC 3.4.1. Link to HWSensors3 in my signature.

i have black screen after boot with your version of FakeSMC

Share this post


Link to post
Share on other sites

If you boot in verbose mode you can see mesages on the screen telling what is happen with you set of kexts. Not black screen.

Photo this screen when stop.

I can propose that black screen means "FakeSMC was not properly installed"

Share this post


Link to post
Share on other sites

If you boot in verbose mode you can see mesages on the screen telling what is happen with you set of kexts. Not black screen.

Photo this screen when stop.

I can propose that black screen means "FakeSMC was not properly installed"

 

I was booting in verbs mode. It boot from SSD and is very fast. At the end of boot is black screen. (sorry for my english)

Share this post


Link to post
Share on other sites

I was booting in verbs mode. It boot from SSD and is very fast. At the end of boot is black screen. (sorry for my english)

It means "FakeSMC is not properly installed"

Share this post


Link to post
Share on other sites

Hi Slice!

 

Thank you for your work!

 

@all

 

Has anyone gotten the RadeonMonitor.kext to play nice with a R9 390 - 0x67B11002 in AMD8000 and in AMDRadeonX4000 under Hawaii -and HWMonitoSMC?

 

If I put it in SLE - chmod -R 755 & chown -R 0:0 & touch SLE- 10.11 starts up fine, kextstat lists it as loaded and kextutility -v also checks out.

 

But as soon as I start HWMonitor it crashes while showing the beginning of the icon animation, looks like its exploding ;)

 

btw, HWInfo leads to a direct KP with console output in the upper left corner.

 

If I remove the kexts and restart, HWMonitor loads fine. I was mostly interested in using it to control the fans of my R9 390 and system fans.

Share this post


Link to post
Share on other sites

Update:

 

yep, gpurestart. For anyone interested in R9 390s gpurestarts I will link to my post in Hardware/Graphics Cards/ATI in a bit.

 

could be something else but I guess it the R9 390 is the culprit.

 

edit:

here is my post http://www.insanelymac.com/forum/topic/312607-r9-390-black-screen-gpurestart/

Test please this version of RadeonMonitor             #220            

sudo -s

chown -R root:wheel ~/Downloads/RadeonMonitor.kext

chmod -R 755 ~/Downloads/RadeonMonitor.kext

kextutil -v ~/Downloads/RadeonMonitor.kext

and show the terminal output

Share this post


Link to post
Share on other sites

Test please this version of RadeonMonitor             #220            

sudo -s

chown -R root:wheel ~/Downloads/RadeonMonitor.kext

chmod -R 755 ~/Downloads/RadeonMonitor.kext

kextutil -v ~/Downloads/RadeonMonitor.kext

and show the terminal output

Password:

bash-3.2# chown -R root:wheel ~/Downloads/RadeonMonitor.kext

bash-3.2# chmod -R 755 ~/Downloads/RadeonMonitor.kext

bash-3.2# kextutil -v ~/Downloads/RadeonMonitor.kext

Defaulting to kernel file '/System/Library/Kernels/kernel'

/Users/mateuszjachym/Downloads/RadeonMonitor.kext - dependency 'org.netkas.FakeSMC' not found.

/Users/mateuszjachym/Downloads/RadeonMonitor.kext - dependency 'org.netkas.FakeSMC' not found.

/Users/mateuszjachym/Downloads/RadeonMonitor.kext - dependency 'org.netkas.FakeSMC' not found.

Diagnostics for /Users/mateuszjachym/Downloads/RadeonMonitor.kext:

Dependency Resolution Failures: 

    No kexts found for these libraries: 

        org.netkas.FakeSMC

 

Code Signing Failure: not code signed

bash-3.2# 

 

Share this post


Link to post
Share on other sites

My RadeonMonitor must be used with my FakeSMC which is "not found"

Mateuszs-Mac-Pro:~ mateuszjachym$ sudo -s

bash-3.2# chown -R root:wheel ~/Downloads/RadeonMonitor.kext

bash-3.2# chmod -R 755 ~/Downloads/RadeonMonitor.kext

bash-3.2# kextutil -v ~/Downloads/RadeonMonitor.kext

Defaulting to kernel file '/System/Library/Kernels/kernel'

Diagnostics for /Users/mateuszjachym/Downloads/RadeonMonitor.kext:

Code Signing Failure: not code signed

/Users/mateuszjachym/Downloads/RadeonMonitor.kext appears to be loadable (not including linkage for on-disk libraries).

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Users/mateuszjachym/Downloads/RadeonMonitor.kext"

kext signature failure override allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/System/Library/Extensions/FakeSMC.kext"

kext signature failure override allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Users/mateuszjachym/Downloads/RadeonMonitor.kext"

Loading /Users/mateuszjachym/Downloads/RadeonMonitor.kext.

/Users/mateuszjachym/Downloads/RadeonMonitor.kext successfully loaded (or already loaded).

 

bash-3.2#

Share this post


Link to post
Share on other sites

 

Mateuszs-Mac-Pro:~ mateuszjachym$ sudo -s

bash-3.2# chown -R root:wheel ~/Downloads/RadeonMonitor.kext

bash-3.2# chmod -R 755 ~/Downloads/RadeonMonitor.kext

bash-3.2# kextutil -v ~/Downloads/RadeonMonitor.kext

Defaulting to kernel file '/System/Library/Kernels/kernel'

Diagnostics for /Users/mateuszjachym/Downloads/RadeonMonitor.kext:

Code Signing Failure: not code signed

/Users/mateuszjachym/Downloads/RadeonMonitor.kext appears to be loadable (not including linkage for on-disk libraries).

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Users/mateuszjachym/Downloads/RadeonMonitor.kext"

kext signature failure override allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/System/Library/Extensions/FakeSMC.kext"

kext signature failure override allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Users/mateuszjachym/Downloads/RadeonMonitor.kext"

Loading /Users/mateuszjachym/Downloads/RadeonMonitor.kext.

/Users/mateuszjachym/Downloads/RadeonMonitor.kext successfully loaded (or already loaded).

 

bash-3.2#

 

Successfully loaded. Now look to system.log about RadeonMonitor. There should be messages from it.

Or just make full DarwinDumper report (without BIOS to reduce the space).

Share this post


Link to post
Share on other sites

Jun 21 11:26:26 Mateuszs-Mac-Pro kernel[0]: RadeonMonitor: found Radeon chip id=67b0 

Jun 21 11:26:26 Mateuszs-Mac-Pro kernel[0]: Found ATI Radeon 67b0
Jun 21 11:26:37 Mateuszs-Mac-Pro loginwindow[98]: -[sFLListManager(ServiceReplyProtocol) notifyChanges:toListWithIdentifier:] Notified of item changes to list with identifier com.apple.LSSharedFileList.RecentApplications
Jun 21 11:26:46 --- last message repeated 1 time ---
Jun 21 11:26:46 Mateuszs-Mac-Pro Console[608]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
 
And DarwinDumper raport: 
 

Share this post


Link to post
Share on other sites

 

Jun 21 11:26:26 Mateuszs-Mac-Pro kernel[0]: RadeonMonitor: found Radeon chip id=67b0 

Jun 21 11:26:26 Mateuszs-Mac-Pro kernel[0]: Found ATI Radeon 67b0
Jun 21 11:26:37 Mateuszs-Mac-Pro loginwindow[98]: -[sFLListManager(ServiceReplyProtocol) notifyChanges:toListWithIdentifier:] Notified of item changes to list with identifier com.apple.LSSharedFileList.RecentApplications
Jun 21 11:26:46 --- last message repeated 1 time ---
Jun 21 11:26:46 Mateuszs-Mac-Pro Console[608]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
 
And DarwinDumper raport: 
 

 

Please remove BIOS and already compressed report, don't make HTML report and your file will be 100kb instead of your 248Mb

Share this post


Link to post
Share on other sites

OK, it is better while... I was asking to do this after loading RadeonMonitor to see it works.

Anyway i see one problem, you have two cards and I am not sure how RadeonMonitor will work with them.

Share this post


Link to post
Share on other sites

Link KP

 

my card is Sapphire Radeon RX 460 OC 

1002:67ef Subsystem: 174b:e348

 

$ log show --predicate "processID == 0" --start 2017-03-26 --debug | grep RadeonMonitor

2017-03-23 22:14:09.946236+0100 0x72       Default     0x0                  0      kernel: (kernel) RadeonMonitor: found Radeon chip id=67ef

2017-03-24 21:58:05.966024+0100 0x72       Default     0x0                  0      kernel: (kernel) RadeonMonitor: found Radeon chip id=67ef

2017-03-26 07:42:03.925394+0200 0x72       Default     0x0                  0      kernel: (kernel) RadeonMonitor: found Radeon chip id=67ef

2017-03-26 07:42:56.239864+0200 0x72       Default     0x0                  0      kernel: (kernel) RadeonMonitor: found Radeon chip id=67ef


2017-03-26 07:42:56.177283+0200 0x72       Default     0x0                  0      kernel: (kernel) HWInfo: SMC Platform: j95

2017-03-26 07:42:56.181681+0200 0x72       Default     0x0                  0      kernel: (kernel) HWInfo: SMC Branch: j95j95a

2017-03-26 07:42:56.186129+0200 0x72       Default     0x0                  0      kernel: (kernel) HWInfo: SMC Revision set to: 2.33f10

2017-03-26 07:42:56.190771+0200 0x72       Default     0x0                  0      kernel: (kernel) HWInfo: SMC ConfigID set to: 08 c0 f0 00

2017-03-26 07:42:56.195485+0200 0x72       Default     0x0                  0      kernel: (kernel) IntelCPUMonitor: CPU family 0x6, model 0x9e, stepping 0x9, cores 4, threads 8

2017-03-26 07:42:56.201013+0200 0x72       Default     0x0                  0      kernel: (kernel) IntelCPUMonitor: Using efi

2017-03-26 07:42:56.205466+0200 0x72       Default     0x0                  0      kernel: (kernel) IntelCPUMonitor: BusClock=100MHz FSB=400MHz

2017-03-26 07:42:56.212608+0200 0x72       Default     0x0                  0      kernel: (kernel) IntelCPUMonitor: CPU0 Tjmax 100

2017-03-26 07:42:56.217249+0200 0x72       Default     0x0                  0      kernel: (kernel) IntelCPUMonitor: CPU1 Tjmax 100

2017-03-26 07:42:56.221753+0200 0x72       Default     0x0                  0      kernel: (kernel) IntelCPUMonitor: CPU2 Tjmax 100

2017-03-26 07:42:56.226208+0200 0x72       Default     0x0                  0      kernel: (kernel) IntelCPUMonitor: CPU3 Tjmax 100

2017-03-26 07:42:56.230625+0200 0x72       Default     0x0                  0      kernel: (kernel) W836x: found NCT6791D

2017-03-26 07:42:56.234794+0200 0x72       Default     0x0                  0      kernel: (kernel) W836x:  mother vendor=ASRock product=Z270 Gaming K4

2017-03-26 07:42:56.239864+0200 0x72       Default     0x0                  0      kernel: (kernel) RadeonMonitor: found Radeon chip id=67ef

2017-03-26 07:42:56.246835+0200 0x72       Default     0x0                  0      kernel: (kernel)  Common ATI Radeon like HAWAII DID=67ef

2017-03

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By blxkspell
      Hey!
      As I have 3 Monitors connected, my RX 570 gets arround 50°C while ideling/ web browsing etc. The problem is, that this temp is apparently just the threshold, when the fans start to spin. So the fans start spinning for a minute then they stop for a while again... This is very annoying for me as the rest of my hackintosh is nearly quiet (SSD, 120mm low RPM cpu fan, nearly silent PSU,...), especially when Im using the pc to revise for school. Does somebody know wether its possible to "change" the threshold till the fans start spinning? Like it would probably not be a problem for the gpu at all, if the temp rises to 55°C but therefore be soundless....
       
       
    • By golden eagl
      Hi everyone,
      I'm struggling with installing driver of my graphic adapter on high Sierra but till now I failed to find a solution to my issue ....
      My PC configuration is .
      CPU : AMD A8-5500 APU with integrated Radeon 7560 
      RAM : 8G    
      I tried to download a tool from tonymax website and after I used it I unable to login to my Mac high Sierra so I installed high Sierra again .....
       
      Any help with this issue
      Thanks in advance 
       
    • By karthiksh1989
      can somebody walkthrough with the mojave installation guide?
      i have a mac high sierra 13.6 version on my macbook pro and want to install mojave on my desktop
      Exact config is Gigabyte gaming wifi 7 motherboard amy ryzen 7 2nd gen 2700X processor Gigabyte G1 8GB grapgic card VEGA 64
      running 2 nvme Samsung 256gb cards and 1 intel 180gb ssd internal and 1tb WD HDD, with 64 GB 3200Mhz Ram
       
      https://wa.me/919611736534 (whatsapp)
    • By corbrink
      Hi,
      I have the following system:
      - Gigabyte Z370M-D3H M-ATX
      - Core i7-8700K Coffee Lake
      - Gigabyte Radeon RX 560 4GB
      - Crucial Ballistix 16GB DDR4
      - 960 EVO 1TB NVMe SSD
      - 850 EVO 500GB SSD
      - Crucial 500GB SSD
      - The 2 500GB SSD's run in Raid for data storage.
      - Western Digital 3TB HDD - Time machine
      - EFI here (too large to attach): EFI.zip

      Questions:
      1. I have a dual screen running from Radeon card, 1 on DP and 1 on HDMI. The one screen on DP goes randomly blank from time to time. Any ideas?
      2. I've read that the kexts should preferably be installed in /library/extensions. I would like to know what kexts should remain in the EFI. I read that you should install FakeSMC in both locations (EFI and L/E). If I follow this route must I change something in the config.plist?
      3. USB info in System Information (attached does not seem correct. I've followed the changes suggested but I'm not sure if this is the best it can be.
      4. Are there something in the EFI and config.plist I don't need or doing wrong?

      Feedback will be appreciated.


    • By 1Ale1
      Ciao a tutti, ultimamente ho deciso di mettermi al lavoro e fare un investimento a lungo termine comprando un fisso che ho assemblato pezzo dopo pezzo leggendo numerosi forum per essere bene informato sul miglior hardware che potessi ottenere per un Hackintosh ottimizzando al meglio i costi: ho finito così per comprare:
       
      Hardware:
       
       
      -Motherboard: Gigabyte Z390 Aorus Pro (Rev 1.0)
      -CPU: Intel i7 9700k raffreddato a liquido (CoffeLake)
      -GPU: AMD Radeon RX580 (avendo letto le eccellenti prestazioni a ottimo prezzo per MacOS)
      -RAM: 32GB DDR4 Crucial Ballistix Sport LT (4x8GB 3000MHz)
      -NVMe SSD Samsung 970 Evo 250GB M.2 dedicato solo a MacOS, nel secondo slot della Mobo M.2 avrei poi messo un Western Digital Blue da 250GB con Windows 10 su metà disco e per l'altra metà il Debian che sto utilizzando adesso
       
       
      Poi mi sono messo subito al lavoro per cercare di far partire questo benedetto MacOs su una macchina non ufficiale, ho tovato quindi questa guida su GitHub che era molto simile alla mia configurazione:
       
      https://github.com/cmer/gigabyte-z390-aorus-master-hackintosh/blob/master/STEP_BY_STEP.md
       
      Dopo aver fatto partire una macchina virtuale per configurare la USB come comunemente viene fatto, scaricando l'applicazione e facendo il "burn/copia dei file" di macOS su pennetta esterna rendendola bootabile solamente da un pc ufficiale mac, sono passato alla configurazione di Clover (l'EFI installer, cartella che allegherò qui sotto, ma prima leggete il problema): Ho messo i driver necessari, mettendo quelli che lui menzionava sotto la sezione "building the usb installer"
       
      https://hackintosh.gitbook.io/-r-hackintosh-vanilla-desktop-guide/building-the-usb-installer
       
       
      Install Clover for UEFI booting only
      Install Clover to the ESP
      Under Drivers64UEFI:
      AptioMemoryFix (the new hotness that includes NVRAM fixes, as well as better memory management) (che poi ho dovuto rimuovere, leggi sezione https://github.com/cmer/gigabyte-z390-aorus-master-hackintosh/blob/master/STEP_BY_STEP.md#fixing-kernel-panics-at-rebootshutdown)
      VBoxHfs-64.efi (or HFSPlus.efi if available) - one of these is required for Clover to see and boot HFS+ volumes. If you see the option to enable it in the installer, make sure it's selected - if you don't see it in the installer, verify that one of them exists in the EFI -> CLOVER -> drivers64UEFI folder
      ApfsDriverLoader - (Available in Dids' Clover builds - or here) this allows Clover to see and boot from APFS volumes by loading apfs.efi from ApfsContainer located on block device (if using AptioMemoryFix as well, requires R21 or newer)
       
      applicando piccole modifiche a causa di un errore già riportato da questa persona che ha scritto la guida di GitHub di sostituire AptioMemoryFix-64 (dalla cartella EFI/EFI/CLOVER/driver64UEFI) con OsxAptioFix2Drv-free2000, questa infatti riportava  quanto segue dopo aver detto di aver sostituito AptioMemoryFix-64.efi con OsxaptioFix2Drv-free2000:
       
      "I am told that there are downsides (that I don't fully understand yet) to using OsxAptioFix2Drv-free2000, so do this at your own risk."
       
      Ho configurato poi il config.plist
       
      Come diceva lui, partendo da questo file: https://hackintosh.gitbook.io/-r-hackintosh-vanilla-desktop-guide/config.plist-per-hardware/coffee-lake e applicando le modifiche che sotto ha descritto, del tipo:
       
      Open coffeelake_sample_config.plist with Clover Configurator (right click → Open With → Clover Configurator)   In SMBIOS: - Click the button with an up/down arrow (middle right). Chose iMac18,3. This is important since we'll be connecting our monitor to the RX580. The HDMI port on our motherboard is NOT yet working for Hackintoshes. - Make sure the serial number generated is an iMac (mid-2017) by clicking Model Lookup. - Ensure that Check Coverage reports that the serial is NOT valid. You don't want to use somebody else's serial number. - While you're here, copy your Board Serial Number to your clipboard. You'll need it soon.
      In Rt Variables: Paste your Board Serial Number in the MLB field. Set CsrActiveConfig to 0x0 which enables SIP for extra security. This should work just fine for a Vanilla Hackintosh install and is how genuine Macs ship. In Boot: Change the Custom Flags to: shikigva=40 uia_exclude=HS14 (this disables onboard Bluetooth since we'll be using an external Broadcom Wi-Fi/Bluetooth adapter) In ACPI: Click List of Patches and enable the following: Change GFX0 to IGPU In Devices: Set Inject to 16. Now to enable our headless iGPU, we need to fake the device id. To do so, Click Properties, select PciRoot(0x0)/Pci(0x2,0x0). Then, click the + button to add a property. Add the following: Property Key: device-id Property Value: 923E0000 Value Type: DATA Click the Export Configuration button (bottom left), then Save As config.plist. Copy your newly generated config.plist to /EFI/CLOVER/ on your bootable USB key.  
      Impostazioni BIOS
       
      E avendo settato nel BIOS le impostazioni che questa perona configliava all'inizio della guida,                       (N.B. la mia versione di Bios è l'ultima, F7 https://www.gigabyte.com/Motherboard/Z390-AORUS-PRO-rev-10#support-dl-bios) (a quanto risulta il giorno 7.01.2019)
       
      Load Optimized Default Settings Peripherals → USB Configuration → XHCI Hand-off : Enabled Chipset → Internal Graphics : Enabled (important for Quicklook/Preview) Please note that we will be using our internal GPU in headless mode only and this guide assumes that. This is how an iMac18,3 (what we're basing our build on) behaves. That's it! I literally didn't change anything else and it just worked.
       
      Anche per me ha funzionato. Comunque lui riportava ulteriori settaggi, aggiungendo:
       
      However, these are settings that are generally recommended. Your mileage may vary:
       
      BIOS → Fast Boot : Disabled BIOS → LAN PXE Boot Option ROM : Disabled BIOS → Storage Boot Option Control : UEFI Peripherals → Trusted Computing → Security Device Support : Disable Peripherals → Network Stack Configuration → Network Stack : Disabled Peripherals → USB Configuration → Legacy USB Support : Auto Peripherals → USB Configuration → XHCI Hand-off : Enabled (Extremely important) () Chipset → Vt-d : Disabled (non l'ho messo e parte a volte, quindi penso che se parte non ha una importanza così rilevante) Chipset → Wake on LAN Enable : Disabled (era già così) Chipset → IOAPIC 24-119 Entries : Enabled  
       
      Il sistema è partito e soltanto alcune volte dava il seguente errore:
       
      Error allocating 0x11996pages at 0x000000001d453000 alloc type 2
      Couldn't allocate runtime area.
       
      Credo che sia questo piccolo problema: la NVRAM.
      Non riesco bene a capire dove cercare per sapere con esattezza se è supportato nativamente o meno. Ho cercato di informarmi, voi potreste dirmi se è vero?
      Premendo poi Ctrl+Alt+Canc riavviavo e selezionando da Clover l'NVMe interno partiva senza dare questo errore, per cui il kernel non trova spazio perché la memoria Non Volatile ad accesso Randomico è troppo frammentata, come
       
      Questa guida riportava:
       
      Primo post:
      https://nickwoodhams.com/x99-hackintosh-solving-osxaptiofixdrv-allocaterelocblock-can-not-allocate-relocation-block/
       
      Post aggiornato nel 2016:
      https://nickwoodhams.com/x99-hackintosh-osxaptiofixdrv-allocaterelocblock-error-update/
       
      Mi sono letto tutto e ho capito che lui applicava anche delle modifiche al file: "Changes to OsxLowMemFixDrv-64.efi were simply editing 0x10000000 to 0x20000000."
       
      Ho quindi seguito il suo consiglio di mettere OsxAptiofix Emuvariable 64 e Test2-2016.efi (che lui aveva creato) ma il problema sembrava persistere, più raramente
       
      La mia cartella driver64UEFI di ora
       
      Dopo aver trovato una strada senza soluzoni anche lì mi sono rivolto a degli amici, e di questo errore ne ho parlato anche con utenti del gruppo Telegram "Hackintosh Italia" che sono stati e ancora sono molto gentili ad aiutarmi spiegandomi che si tratta di un problema di NVRAM, che nel mio caso, avendo installato questi .efi file nella cartella EFI/EFI/CLOVER/driver64UEFI (che ancora è cosi attualmente, oscillando tra couldnt allocate runtime area (anche dopo aver definitivamente staccato la corrente dopo aver spento il PC per capire se poteva aiutare) e a volta anche nessun errore)
       
       
      -ApfsDriverLoader-64.efi
      -DataHubDxe-64.efi
      -EmuVariableUefi-64.efi
      -FSInject-64.efi
      -HFSPlus-64.efi
      -NTFS-64.efi
      -NvmExpressDxe-64.efi
      -OsxAptioFix2Drv-free2000.efi
      -PartitionDxe-64.efi
      -UsbKbDxe-64.efi
       
      In più ho aggiunto gli RC Scripts (come mi è stato consigliato dai membri del gruppo telegram) sul disco interno in cui mac è installato.
       
      Togliendo quindi qualsiasi test.efi o test2- 2016.efi ed ascoltando chi ne sapeva di più. Ora mi trovo a dover affrontare diverse volte questo errore dovendo riavviare per risolverlo, cosa che mi fa dedurre che Osxaptiofix2 2000 sia un po' instabile nel pulire la NVRAM prima di avviare la macchina/ allo spegnimento di questa.
      Questo problema di couldnt allocate runtime area persiste sebbene prema F12 dalla schermata di Boot di Clover.
       
      Vi chiedo gentilmente una mano, inoltre mi è stato detto che siccome il sistema da:
       
      -"3.6 GHz unknown nella sezione "Processor"
      -non riconosce la RAM con un Vendor ID? (del tipo Ballistix dovrebbe essere?)
       
       
      Serve di rivedere il config.plist che ho creato, rivedere i DSDT e gli efi? sono a posto?, (mi hanno detto che gengik84 fare, ma accolgo volentieri l'aiuto di tutti) ,  vi mando una foto della schermata di "About this Mac" e della EFI in allegato. Quello che farò sicuramente mentre attendo vostre risposte è il downgrade da 10.14.3 Beta a 10.14.2, l'upgrade l'ho fatto pensando che magari avrei aggiustato qualcosa, ma l'errore come lo dava prima lo dà ora, non credo che questo cambi molto le cose in gioco. Comunque è meglio non essere in Beta per aggiustare gli errori.
       
       
      Grazie mille per essere arrivato a leggere fino a questo punto, lo apprezzo molto.
       
       
      Per la cartella EFI: sono 22MB zippati, in allegato non entrano...
       
      https://drive.google.com/open?id=106jXkDB0Id045lzIIzAn9F5MwnzWFv3X
       

       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       

       
       
       
       



×