Jump to content
  1. Tetonne

    Tetonne

  2. midi-sama

    midi-sama

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By rdall96
      Hello everyone!
       
      I am fairly new to the world of Hackintosh. I recently moved my previous build into a smaller form factor. However, I am running into a series of problems with the USB ports on the new case and the new motherboard.
       
      Part List:
      - i7-7700k
      - Gigabyte Z270N Gaming 5
      - 16GB Trident Z RGB 3200 MHz
      - Sapphire RX 470
      - NZXT Kraken x62
      - NZXT H200 for the case
       
      Everything in the Hackintosh works just like it did before, nothing changed in the hardware department other than the motherboard (previously a gigabyte Z20X Ultra) and the case.
      This motherboard does not have any USB 2.0 ports in the back, there is only one header on the board, currently taken by the Kraken x62. The rest of the ports are all either USB 3.1 Gen1 or USB 3.1 Gen2, and the front of the case has 3.1 Gen1 ports as well.
       
      This is my current problem:
      When I plug something into either the type A or type C Gen2 ports, it works fine as a normal USB 3.x device with normal speeds, but when I plug something into any other USB port, it only works at lower 2.0 speeds. This is a big problem for me, since I have a few external devices that need the 3.0+ speeds and I don't know what to do.
      I tried to follow many different guides on how to patch USB ports, remove the limits, etc... But nothing seems to work.
       
      Please someone help me!
    • By Allan
      In this forum is possible to use the file manager to upload files, photos/.plists or kexts.
       
      Follow this steps in the video bellow:
       
      Post files.mov
    • By Nopam456
      SPECS:
      Motherboard: MSI Z170A
      Cpu: I7 6700K
      GPU,Graphics card: Nvidia GTX 1070
      Ram: 16GB
      Drives: I have 1 SSD for my windows and 2 HDD from 1tb and 2 tb, The 1TB is available for the hackintosh.

      Also disabled VD-T and enabled XHCI and disabled CFG Lock

      So i went through all the steps first i had an issue with my usb that it wasn't bootable
      Fix: Go to disk utility, find your USB and erase the data and use GUID Partition Map

      Now further with my problem,

      So i fixed that issue i had and then the installation was freezed on loading, then i turned on XHCI in bios usb configuration..
      And also in clover into settings and removed dart=0,

      Then it started loading!
      BUT now after the loading i get the parking sign and i do not know what to do now.

      I tried everything, sometimes when i reinstalled everything i didn't have parking sign but just a reboot when the apple logo showed up very weird here is some verbose output:

      https://imgur.com/a/Re1oOsI#JRTeX63

      So i tried literally everything...

      Please someone help me..
      And like i don't know call in discord or anything and go through the installation with me cuz its just not working.
      And i don't know what i'm not doing or doing wrong...
      Thanks for the help
    • By b31k
      Report Problem Files.zip
    • By BOB4UK
      Я выполнил инструкции, но когда я запустил установку, после загрузки полосы под яблоком у меня есть установочные окна, но их очень сложно понять, яркость ниже минимальной в Windows. Извините за мой плохой английский
       
      Specs: Core i7-6500u, 8GB RAM, GTX 950M (DISABLED)
×