Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By KNNSpeed
      NOTICE: The official AppleALC now contains layout-id 72. There's no more need to download the AppleALC.kext.zip file from this post.
       
      NEW!
       
      After several weeks of toiling (it's July already?!), here's a new audio solution for perfect working audio. I basically ported the linux driver and created a GUI popup menu to configure the combo jack (see screenshot).
       
      Features:
      Fully working Combo Jack! (Heaphones, headset, AND line-in!) New verb sending kext (no more need for CodecCommander on systems without EAPD troubles; VerbStub is simply a direct port of hda-verb for Linux) Launchdaemon with Windows-like pop-up menu monitors the jack for insertion Automatic OMTP (Nokia)/CTIA (iPhone) detection for headsets! Fully commented sources Notes:
      Line-in mode disables audio output. I haven't been able to re-enable the speakers when the jack is purely an input, but that's the only "issue" Zero "no audio after sleep" issues so far Make sure to turn off "Use ambient noise reduction" when using an input that isn't the internal Mic (unless you find that it helps) How does it work?
       
      Simple! Due to the way the Realtek codec is set up on this machine, the ComboJack program watches the jack and switches the codec selector (node 0x22) to the correct input after applying all the requisite processing coefficients and pin widgets. This means that Mac OS only sees a built-in mic, but behind the scenes it actually is connecting to the headset and line-in ports. This works because all input paths lead through selector node  0x22 and into capture node 0x09, and the OS only acknowledges the capture node.
       
      How to install (uses modded AppleALC):
      Disable SIP (I use 0x67 for CSRActiveConfig and 0xEE for booterconfig) Remove ALCPlugFix from /usr/bin (may need to kill with Activity Monitor first) Remove good.win.ALCPlugFix.plist from /Library/LaunchAgents (may need to launchctl unload first) Remove CodecCommander from Clover/kexts/Other (unless you need it, but it looks like the 9560 doesn't) Copy VerbStub.kext to EFI/Clover/kexts/Other Copy AppleALC** to EFI/Clover/kexts/Other Change layout-id to 72 (in SSDT-Config -- 0x48 is hex) Run install.sh and read what it says Reboot (and enable SIP if you want)! Download "ComboJack Installer.zip" and "AppleALC.kext.zip" for everything. The other zips are sources.
      (Also included in "ComboJack Installer" is a folder containing the platform, layout, and pinconfigs used.)
       
      **AppleALC now includes this layout (layout-id 72) in the official release.
      ComboJack Installer.zip

      VerbStub Source.zip
      Combo Jack Source.zip
      AppleALC.kext.zip
    • By AJackTi
      Hello everyone.
       
      I am a newbie! I just update from Mojave to the newest Catalina Hackintosh. But I cannot connect to Wifi. And I find many solutions to this problem, but it cannot help me.
       
      Anyone who helps me to see my EFI has any error. 
       
      My Wifi: BCM94322HM8L
      My info laptop: Dell M4700 i7 3720QM 
      My EFI: https://drive.google.com/file/d/1fjy6DDZuEWbxiTcYFZCX2msqO5skRCU9/view?usp=sharing
       
      Thank you so much and sorry for English grammar. 
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Pro and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Pro, 9900k with a Vega 56 but has also been tested and verified fully working with the following Hardware using Catalina 10.15.2
       
      CPU's
      8700k, 9600k, 9700k, 9900k
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install.
       
       
      HARDWARE USED
      • Intel I9 9900k 
      • Gigabyte AORUS Z390 PRO
      • Sapphire Nitro+ SE Vega56 (connected to monitor with DisplayPort)
      • Corsair Vengeance Pro RGB 16GB @3200mhz (2 x 8GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit. 
      • CoolerMaster MASTERLIQUID ML360R RGB CPU Cooler
      • Samsung 970 EVO 1TB NVMe SSD macOS Mojave
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       

       
       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar
       
       
      CLOVER  FOLDER
      Use this folder with fully patched DSDT
      Current EFI 
      Updated 15/01/2020
      Aorus Z390 Pro Vega Navi VII F12d EFI .zip - Use with Bios revision F12d Only (15/01/2020 Catalina 10.15.2 Vega, Navi (5700, 5700xt), Radeon VII DSDT Installed) SMBios 19,1
      Aorus Z390 Pro RX Polaris F12d EFI .zip - Use with Bios revision F12d Only (15/01/2020 Catalina 10.15.2 RX5XX Polaris DSDT Installed) SMBios 19,1
      HD630 Z390 Pro F12d EFI.zip - Use with Bios revision F12d Only (15/01/2020 Catalina 10.15.2 HD630 IGPU Only) SMBios 18,1
       
      PLEASE NOTE - Please flash your motherboard bios to revision F11 to use my current EFI. It’s a major rework of the bios and vital changes have been made to the layout and power tables. New DSDTs have been created and installed into the new EFI’s but will not work correctly with any other bios revision.
       
      Latest Gigabyte Z390 PRO BIOS (F12d)
      mb_bios_z390-aorus-pro_f12d.zip
       
       
      CFG Unlock (MSR) F12d BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      DSDT's & Older EFI’s (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      Alternative EFI - N-D-K Fork of OpenCore (16/01/2019)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://olarila.com/forum/viewtopic.php?f=19&t=1131 
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      Clover
      Clover Configurator
      Kext Updater
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      FakeSMC    (Can be used instead of VirtualSMC)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11)
      • Enter BIOS → Press F12 → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled
      • Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup 
       
       
      SCREENSHOTS
       

       

       

       

       

       

       

       

       

       

       

       
       
       
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F10, 9900k with a Vega 56 but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700K, 9600K, 9700K, 9900K, 9900KS
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Nitro+ SE 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.1
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      CLOVER EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      Use this folder with fully patched DSDT
      Current EFI 
      Updated 14/01/2020
       
      EFI Update - 14/01/2020 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
      Aorus Z390 Master F11c Navi Vega VII EFI.zip - Vega, Navi (5700, 5700XT), Radeon VII DSDT EFI
      Aorus Z390 Master F11c RX Polaris EFI.zip - RX5XX Polaris DSDT EFI
      Aorus Z390 Master F11c HD630 igpu EFI.zip - Use with Bios revision F11c Only (17/01/2020 UHD630 IGPU Only) SMBios 8,1
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's & Older EFI’s (A big thanks to @MaLd0n for compiling these DSDT's)
       

      Alternative EFI - N-D-K Fork of OpenCore (14/01/2019)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://olarila.com/forum/viewtopic.php?f=19&t=1131 
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F10)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled
      • Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS
       

       

       

       

       

       

       

       

×