Jump to content
Sign in to follow this  
Followers 0
geekingoff

Kernel Panic - AppleACPIPlatform

7 posts in this topic

Recommended Posts

Hello everyone, this is my first post here.

 

I have a pretty old laptop that I'd like to get Snow Leopard running on. At first, I tried booting Nawcom's ModUSB with a retail DVD image, but I would always get kernel panic, no matter what I tried (I couldn't even get to the installer).

 

So I decided to try a distro, after trying many different things with ModUSB. I decided to use Hazard's 10.6.1-10.6.2 SSE2/SSE3 Intel/AMD distro. I was shocked when it booted to the installer with no issues! I formatted the HD as Mac OS Extended (Journaled), GPT. I then installed Snow Leopard. After a while, the installation succeeded, and I was happy. It went ahead with the restart necessary for the installation, and... kernel panic. The same kernel panic I got before when trying ModUSB. I was really disappointed. 

 

I've tried many things:

 

boot flags, such as: acpi=off arch=i386 GraphicsEnabler=No PCIRootUID=0 -f -s -x (and more, including verbose mode of course)

booting the installer again after successful installation, and then going to System/Library/Extensions on the HD in terminal, then: "chmod 755 *.*" as well as "kextcache -a i386 -m *.*"

reinstalling with no customize options selected apart from the boot loader (first installation, things such as the legacy kernel and specific kexts were specified)

and probably some other things that I can't remember right now

 

The thing is, if the installer can load with no issues, then Snow Leopard should work fine too, because they're theoretically (don't know for sure) using the same components (kernel, kexts, etc.). If I boot the installer in verbose mode, it gets right past the part where it kernel panics after installation just fine. This makes me think that something is configured differently after it is installed - something that the installer does not have - which is causing the kernel panic and preventing the boot.

 

Here are the specs of the laptop I'm trying to install this on:

 

Intel Pentium M 753 ULV @ 1.2GHz

1GB RAM

855GME Graphics/Chipset

 

I know that this probably isn't the most compatible with SL, and I know the chipset/graphics are unsupported. However, I think I will be able to get it to work eventually, I just need some input on what might be going on. Looking at the kernel panic, it points toward AppleACPIPlatform.kext, but I don't know what's exactly wrong with it that is causing the kernel panic.

 

Please take a look at the verbose mode image I have attached. I appreciate any and all help I receive! :)

post-2319961-0-22277600-1510794817_thumb.jpg

Share this post


Link to post
Share on other sites
Advertisement

Hello and welcome at InsanelyMac.

 

Please read our Rules:

#Only post your post once (1). This keeps the forum cleaner and makes it easier to find what you are looking for.

 

Be careful about Distros, look this:

VERY IMPORTANT: PLEASE READ! (ABOUT TONYMACX86 AND iATKOS M / Y / EC / SR)

Why InsanelyMac does not support tonymacx86

 

Share this post


Link to post
Share on other sites

Hello and welcome at InsanelyMac.

 

Please read our Rules:

#Only post your post once (1). This keeps the forum cleaner and makes it easier to find what you are looking for.

 

Be careful about Distros, look this:

VERY IMPORTANT: PLEASE READ! (ABOUT TONYMACX86 AND iATKOS M / Y / EC / SR)

Why InsanelyMac does not support tonymacx86

 

Yeah, I mistakenly put this in post-installation, when I meant to put it in the other one. I added it to the other one and intended on deleting the other, but didn't see the option. But this actually fits post-installation better.

 

I know you guys don't support tonymacx86, but I don't believe I really mentioned anything to do with him/them. If you're just warning me, then I understand. 

 

And if you can elaborate more on the distros, I'd appreciate it. If you guys don't allow the discussion, then that is fine, but I've seen loads of posts involving them, so I didn't know. The reason I included it is because it got me the farthest, but in the end it gave me the same kernel panic (but at least it allowed me to install...)

 

Thanks!

Share this post


Link to post
Share on other sites

SL 10.6 is really not suitable for this platform. Leopard 10.5 would be a better choice although I still have doubts about any likely support for this ancient chipset and graphics chip: it's got ICH4-M I/O controller + Extreme 2 graphics... Maybe Tiger, but really, what's the point?

 

I have Leopard running perfectly on a 2005 Pentium M platform but it's fitted with the 915GM chipset (i.e. GMA900), not one of its predecessors such as yours. I could never get SL to run 100% properly on it and, God!, have I tried hard... Always had trouble with the ICH6-M controller in IDE mode at installation and, of course, no support for GMA900. I'm pretty sure you have Zero (0) chance to run SL on that dinosaur.

 

I don't want to ruin your high hopes but this laptop of yours is just what it is: very very old and totally obsolete. It's what, 15years old or so? You would hardly be able to run Win XP on it...

 

My advise is not to waste any time on this.

 

With regards to your comparison between booting the installer vs. the installed OS and your subsequent expectations, please note that the installer boots on a very minimal set of drivers. The installed OS boots with a very different setup.

Share this post


Link to post
Share on other sites

Yeah Intel's Dothan architecture was released in 2004 so that makes it to date 13 years old. This particular processor has a HUGE TDP of 5.5W, SO MUCH POWWEEERRR. At least it's efficient lol.

 

I reckon Win95-2000 might work OK, but surely you could afford a $50 prebuilt Core 2 Duo Dell to put OS X on? It would be a MUCH better experience than trying to run it on the Pentium. Plus you could do a vanilla installation with no patching and screwing around with the kernel.

post-1410642-0-14413600-1510818963_thumb.jpg

Share this post


Link to post
Share on other sites

SL 10.6 is really not suitable for this platform. Leopard 10.5 would be a better choice although I still have doubts about any likely support for this ancient chipset and graphics chip: it's got ICH4-M I/O controller + Extreme 2 graphics... Maybe Tiger, but really, what's the point?

 

I have Leopard running perfectly on a 2005 Pentium M platform but it's fitted with the 915GM chipset (i.e. GMA900), not one of its predecessors such as yours. I could never get SL to run 100% properly on it and, God!, have I tried hard... Always had trouble with the ICH6-M controller in IDE mode at installation and, of course, no support for GMA900. I'm pretty sure you have Zero (0) chance to run SL on that dinosaur.

 

I don't want to ruin your high hopes but this laptop of yours is just what it is: very very old and totally obsolete. It's what, 15years old or so? You would hardly be able to run Win XP on it...

 

My advise is not to waste any time on this.

 

With regards to your comparison between booting the installer vs. the installed OS and your subsequent expectations, please note that the installer boots on a very minimal set of drivers. The installed OS boots with a very different setup.

The laptop is from 2005, so about 12 (probably near 13) years old. Actually, it came pre-installed with XP and it was surprisingly snappy.

 

I actually just tried installing Leopard and it installed with no problems! It is surprisingly fast, but Leopard can even run on a 867MHz G4, so that's not too much of a surprise - I'm just not sure what is faster... A 1.2GHz Pentium M or an 867MHz G4. During the installation of Leopard, I noticed some kexts were available for it (I think patched AppleACPIPlatform + AppleAPIC). Of course they're for Leopard, but AppleACPIPlatform is the exact kext I had issues with, so just out of curiosity, I put them on the SL installer, and I'm seeing what happens right now.

 

Thank you very much for the advice!

Yeah Intel's Dothan architecture was released in 2004 so that makes it to date 13 years old. This particular processor has a HUGE TDP of 5.5W, SO MUCH POWWEEERRR. At least it's efficient lol.

 

I reckon Win95-2000 might work OK, but surely you could afford a $50 prebuilt Core 2 Duo Dell to put OS X on? It would be a MUCH better experience than trying to run it on the Pentium. Plus you could do a vanilla installation with no patching and screwing around with the kernel.

attachicon.gifrgop4.jpg

I'm actually not going to be using this machine at all for everyday use, although it would be pretty awesome to do some basic stuff on it. I have many modern computers, including a triple boot (Windows 7 Ultimate, Ubuntu, and macOS Sierra) Hackintosh laptop with an i3-6100U, 128GB SSD, and 8GB RAM. I also have a 27" 2011 iMac, and a gaming PC that I plan on making a Hackintosh as well. Here's the reason why I want to do this: It's a 7" "laptop" that is really a UMPC (ultra-mobile personal computer). I got the idea that it would be super cool to run OS X on such a small machine. Here, I attached two pictures, one with a DVD on the keyboard to give you an idea of how small this now Hackintosh is.

 

Thanks for the reply!

post-2319961-0-60202500-1510829454_thumb.jpg

post-2319961-0-77506600-1510829459_thumb.jpg

Share this post


Link to post
Share on other sites
. Here's the reason why I want to do this: It's a 7" "laptop" that is really a UMPC (ultra-mobile personal computer). I got the idea that it would be super cool to run OS X on such a small machine. Here, I attached two pictures, one with a DVD on the keyboard to give you an idea of how small this now Hackintosh is.

 

Thanks for the reply!

Fair enough, well done making it work.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By astroguy
      Sorry for the vague subject line, but I think I have a hardware issue and I'm having trouble diagnosing it.  This is a LONG post because I'm trying to explain what I tried and to give you all the info that I do have.
       
      History: This has been a successful Hackintosh for 2 years 2 months.  I have not changed the OS (still running 10.11.4) just to avoid any problems.  I have not changed the hardware other than GPU about a year ago, hard drives over time, and RAM about two weeks ago.  (Keep that RAM in mind.)
       
      Hardware:
      Motherboard: ASRock Z170 OC Formula CPU: Intel i7-6700K RAM: G.SKILL Ripjaws V Series 32GB DDR4 @2400, replaced with Corsair 64GB DDR4 @2133 (but lower CAS latency) GPU: MSI GeForce GTX 970 PSU: CORSAIR AX760 760W 80+ Platinum CPU Heatsink:  CORSAIR Hydro Series H105  
      Problem, Tuesday Night:  Catastrophic death.  Just shut down, couldn't get it up.  I spent over two hours midnight–2am, then another hour after I got up in the AM, determining that the heatsink pump had died.  To make a three hour story short, the errors on the motherboard were all related to RAM, but it had been running fine with the new RAM for 10 days.  I put in the old RAM and got the computer to boot, and then I heard that the fans were going full-tilt and saw the CPU temperature at just under boiling.  And it shut down.  I determined it was the pump and not motherboard because the pump did not turn on when I moved it to a header on the motherboard that had just been powering a fan that was fine.  So I ordered a new CPU cooler and installed it yesterday.
       
      Problem, Sunday Night: It was running fine for a day, after installing the new CPU heat sink.  We had a brown-out in the morning which apparently did NOT trip any UPS in the house, and the computer restarted.  Seemed fine, then tonight (11 hrs after the brownout), I went to make dinner, came back and all the fans were going and the computer wasn't on.  The light on the Corsair pump was flickering.
       
      Trying to Diagnose:  So, with the light flickering, I thought maybe it was the motherboard after all, and the CPU fan 1 was just dead (or dying).  No problem, moved it to CPU fan 2 and moved the fans for the heatsink to chassis 2 and tweaked the fan speeds in the BIOS (I was able to boot to it) and ... couldn't boot.  I can get to the BIOS.  I can start getting to the Mac OS, but I can't actually boot fully.  The motherboard is cycling between error codes 00 and 19, which from what I can find means CPU (00) or RAM (19).  I have tried powering the whole system down (on the PSU) for awhile, going back to the old RAM (works but then same error code on reboot), and even going to a passive heatsink I had in storage.
       
      Why this May Be a Hackintosh Question:  I have a pattern now to diagnose.  After hitting the restart a few times, I can get into the BIOS, no longer getting the 00/19 error on the motherboard.  I can get to the Clover boot menu, at which point the diagnostic LED on the motherboard turns off.  I can start the Mac OS, it spits out a bunch of diagnostic stuff, and then freezes, and the lights on the motherboard turn back on and flash between the 00 and 19 errors and the display shuts off.  I get to the same spot in the Mac OS startup, and that's when it shuts down.  To me, from the zero that I know about this, it looks like it's saying there's a CPU error.  Meaning I may have fried the CPU (or motherboard? or both?) during that initial CPU cooler failure five days ago.  I have attached a screenshot from the video I took of the screen while starting up the last time.
       
      CMOS Reset:  I tried doing this as an addendum, after taking pictures of every screen in the BIOS so I could restore.  The reset definitely reset the BIOS, I got it to boot to the BIOS again, but I'm stuck at the same death point as in the screenshot.  The ONLY difference is that now instead of just stopping there, it goes black for a few seconds and returns to the BIOS option screen (F2 for BIOS, F11 for Boot, etc.), and then tries to boot the Mac OS again.  Fails at the same point again, the only difference each time is that in that "Backtrace (CPU #) ..." line, the # changes, and the com.apple.lokit.IOBluetoothHostController... hex stuff is different.
       
      Help!?  Do I need a new motherboard and CPU?  Fortunately, everything is backed up hourly, and on my laptop, and the HDDs should still be fine.

    • By Insanelymac_user_abc
      Is it possible to install an older OS X.5 Leopard or OS X.6 Snow Leopard Hackintosh system on a modern i7 processor PC?  
       
      I need to to run either of those systems using an Intel Core i7-4770K Quad-Core Desktop Processor on a Gigabyte GA-Z87MX-D3H motherboard.
       
      I saw this post where someone said “Clover 32Bit should boot Leopard as well, using Legacy mode. You will need 32bit kexts as well.”  https://www.insanelymac.com/forum/topic/331457-bootloader-for-leopard/ .. Would that be valid advice for me to follow up on for my configuration?  I see that Clover 32 bit is no longer in development.. https://www.insanelymac.com/forum/topic/317521-good-bye-clover-32/
       
    • By giovanealex
      Hi guys.

      Sometimes I am a complete noob, so I deleted two kexts from S/L/E and now my Asus Q200E laptop with OS X El Capitan boot hangs on kernel panic. I still can enter go through Clover to reach Recovery Mode and use Terminal, so I've put the two kexts on a USB pendrive and after some struggle I've managed to succefully copy them using Terminal, but the boot is still stuck on kernel panic. As I remember, these are the commands I've typed:

      mount -rw

      cp -a /Volumes/usb-stick/name.kext /Volumes/my-osx-drive/System/Library/Extensions

      Is there anything else I should do? Is anything wrong? Should I type some command else? For instance, should I type something to fix permissions and rebuild cache?

      Thanks a lot!
    • By MikixIT
      Salve a tutti, sono nuovo
      Ho un problema per installare il mio primo hackintosh 
      le mie spec sono: i7 720qm , gt730 2 gb ddr3, 8 gb di ram e una motherboard che non si capisce modello sia(perchè? perchè è un preassemblato a cui ho modificato i componenti mi lascio anche uno screen di cpuid se può essere utile comunque è legacy,comunque la motherboard è intel. )
       
      Comunque ho creato un boot usb con clever per installare Sierra e tutto va okay fin quiando vado in kernel panic, ho provato diverse boot flags ma non riesco ad arrivare all'installer di Cupertino
      CHIEDO AIUTO,grazie ancora aspetto risposte
    • By MikixIT
      Hi guys
      i need help for this kernel panic its the first hackintosh for me
      I posted photo error
      my spec: i7 720qm,gt 730 2 gb ddr3 msi,8 gb ram
      its a desktop
       
      Pls help me

×