Jump to content
  1. blackosx

    blackosx

  2. zxv

    zxv

  3. truemac

    truemac

  4. nikitenich

    nikitenich

  5. Maniac10

    Maniac10

  6. PMheart

    PMheart

  7. Badruzeus

    Badruzeus

  8. ctich

    ctich

  9. Cyberdevs

    Cyberdevs

  10. rock.n.rollyn

    rock.n.rollyn

  11. Matgen84

    Matgen84

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fusion71au
      This is a brief guide on how to create a vanilla El Capitan (also same process for Sierra) OS X Installer USB with an updated prelinked kernel containing FakeSMC.

      It is tailored for those users who want to understand the “nuts and bolts” of how to create an installer and also to help brush up on their terminal skills (rather than have one made for them with the numerous automated “tools” available or even Apple’s createinstallmedia) :
       
       
      Specifically, it is also a “Proof of Concept” which shows that installation is possible without even having to rely on boot loader kext injection.

      Prerequisites
      Existing Yosemite installation (or Mavericks - see post#4 for steps 7,8) “Install OS X El Capitan.app" downloaded to the Applications folder Pacifist FakeSMC.kext - Slice or Kozlek branch Bootloader - Clover or Chameleon 8GB or larger USB drive (16GB recommended), formatted HFS+ (MBR or GUID) named “Installer”  
      Procedure
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Open OS X terminal and type the following lines, followed by <Enter> after each line.
          The image restore and file copying may take a while to complete, and at the end of the process, the Installer volume is renamed to “OS X Base System"....
       
      sudo -s hdiutil attach /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/SharedSupport/InstallESD.dmg asr restore -source /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg  -target /Volumes/Installer -erase -format HFS+ -noprompt -noverify rm /Volumes/OS\ X\ Base\ System/System/Installation/Packages cp -av /Volumes/OS\ X\ Install\ ESD/Packages /Volumes/OS\ X\ Base\ System/System/Installation cp -av /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg /Volumes/OS\ X\ Install\ ESD/BaseSystem.chunklist /Volumes/OS\ X\ Base\ System diskutil unmount /Volumes/OS\ X\ Install\ ESD exit 3.  Right click on the “OS X Base System” Volume and click “Get Info”
       

      4.  Click on the lock icon and untick “Ignore ownership on this volume”
       

      5.  Extract/Copy the El Capitan Kernels folder into /System/Library/ of the USB with Pacifist.  NB It is found in the "Essentials.pkg" in /System/Installation/Packages
       

      6.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel —> OG.prelinkedkernel
       

      7.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of the installer USB using Finder.
       

      8.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel…..
       
      sudo -s chmod -R 755 /Volumes/OS\ X\ Base\ System/Library/Extensions chown -R 0:0 /Volumes/OS\ X\ Base\ System/Library/Extensions touch /Volumes/OS\ X\ Base\ System/System/Library/Extensions kextcache -u /Volumes/OS\ X\ Base\ System exit Any errors should be noted but the output below is normal e.g.


      9. Install your Bootloader targeting the OS X Base System volume
       
       
       
       
      10.  Boot your system with the USB without injected kexts into the OS X Installer GUI....
       
       
       
       
       
      Post Install
      The original prelinked kernel in a fresh install of El Capitan will also lack FakeSMC ie it will only be linked to Apple signed kexts.  In order to boot into El Capitan the first time around without boot loader kext injection, the PLK needs to be rebuilt for the El Capitan volume like we did for the installer:
       
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel for the El Capitan volume —> OG.prelinkedkernel
      3.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of El Capitan using Finder
      4.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel.  In this example, the El Capitan volume is named "El_Capitan" - change if you have named it something else...
      sudo -s chmod -R 755 /Volumes/El_Capitan/Library/Extensions chown -R 0:0 /Volumes/El_Capitan/Library/Extensions touch /Volumes/El_Capitan/System/Library/Extensions kextcache -u /Volumes/El_Capitan exit 5. Install your Bootloader targeting the El Capitan volume.  This step is only necessary if you are installing El Capitan on a new drive without existing boot loader (not required if installing on a disk with existing boot loader beside Yosemite).
      6. Reboot your system without injected kexts into El Capitan!
       
       
      Other links
      The All-In-One Guide to Vanilla OS X for beginners
       
      Updates for Sierra and High Sierra   Custom Prelinkedkernel Generator Tool I have made a custom prelinkedkernel generator "PLK.tool" for Sierra + El Capitan.  Instructions:   1.  Download and extract the attached BaseSystem_PLK.tool.zip into your ~/Downloads folder.   2.  Copy any extra kexts necessary for booting your hack to ~/Downloads/BaseSystem/ExtraKexts (e.g. FakeSMC, VoodooPS2Controller), making sure SIP is disabled. 3.  Copy BaseSystem.dmg to ~/Downloads/BaseSystem  4.  Open terminal and run the following commands... cd ~/Downloads/BaseSystem chmod +x PLK.tool ./PLK.tool ---> supply your admin password ---> will place your new custom prelinkedkernel on the desktop.       macOS High Sierra bypass Firmware and MBR checks in post#13.
      BaseSystem_PLK.tool_ElCap.zip
      BaseSystem_PLK.tool_Sierra.zip
      BaseSystem_PLK.tool_Mojave.zip
    • By vector sigma
      HWSensor Features
      Control temperature of Intel and AMD CPU Control temperature of AMD, Intel and NVidia cards Control temperature of motherboard Control FANS Control Voltages Control HDD/SSD state (SATA & NVMe) with S.M.A.R.T. monitoring  Control frequencies Laptop Battery Monitoring Different applications support High Sierra compatible Installation to /S/L/E or in the ESP (Clover only)  
      Supported languages:
      English (base), Russian, Italian, Korean and semplified Chinese
       
      Source code: at https://sourceforge.net/p/hwsensors/hwsensors3/code3/HEAD/tree/
      Bugs report at https://sourceforge.net/p/hwsensors/hwsensors3/tickets/
      Topic for discussion at: https://www.insanelymac.com/forum/topic/299861-hwsensors3/
       
      Chief Developer @Slice, new HWMonitorSMC2.app and package by @vector sigma
    • By Slice
      Laptop battery monitoring

       
       
       
      Using this driver you have to exclude other battery drivers: ACPIBatteryManager, AppleSmartBattery and so on.
      This driver assumes to using HWSensors3 with FakeSMC 3.5 as being part of it.
       
      19.01.2018
      Updated version of VoodooBatterySMC will get extended battery information and so it will be more exact.
      VoodooBatterySMC.kext.zip
       
      Updated HWMonitorSMC by vector-sigma
      HWMonitorSMC.app.zip
       
      HWMonitor2 by vector-sigma
      https://sourceforge.net/projects/hwsensors3.hwsensors.p/files/latest/download
    • By sajiddesigner
      Hello
      I am trying to install Mac OS High Sierra on Dell Optiplex 780 (tower) desktop
      Specs are:
      Dell Optiplex 780 (tower)
      4GB DDR3 Ram
      Core2Duo Processor
      ATI Radeon HD5450 512MB

      I have created Bootable Usb, Clover method, copied kexts, config.plist and DSDT from http://www.insanelymac.com/forum/topic/312656-guide-macos-sierra-1012-dell-optiplex-780-760-755-790-990/and http://www.insanelymac.com/forum/topic/312656-guide-macos-sierra-1012-dell-optiplex-780-760-755-790-990/page-47#entry2484626 

      I tried using bootflags GraphicsEnabler=Yes/No
      npci=0x2000 and npci=0x3000

      Replaced kexts and used different versions of FakeSMC but no success. My Screen doesnot stuck at DSMOS has arrived.. After this line, 2 or 3 more lines show up very fast and then display is vanished from screen.

      See panics video here:  https://www.facebook.com/groups/hackintosch/permalink/10156304726097446/
       
      Please help..
    • By Slice
      The thread splitted from HWSensors3.
       
      Tools to testing Radeon state.
      Load RadeonPCI.kext  
      RadeonPCI.kext.zip
       
      How to load
      sudo chown -R root:wheel ~/Downloads/RadeonPCI.kext sudo chmod -R 755 ~/Downloads/RadeonPCI.kext sudo kextutil -v ~/Downloads/RadeonPCI.kext and use RadeonDump utility
      RadeonDump1.zip
       
      Commands to see temperature
      Polaris
      ./RadeonDump1 -n 6b0,c0300014
      SeaIsaland
      ./RadeonDump1 -n 200,c0300014
       
      Old families
      ./RadeonDump1 -r 714,7f4
       
      Other possible methods to find a register for temperature
      ./RadeonDump1 -n 6b0,c0300e0c
      ./RadeonDump1 -n 6b0,1c5
      ./RadeonDump -n 6b0,d8200ca4
      ./RadeonDump -r 59800,59810
      ./RadeonDump -r 678,680

       
       
       
      01.12.2017
      Latest solution RadeonMonitor.kext here
      works for RX 460,480,580
      not works for HD7790, R9 290X?
       
      06.12.2017
      Here works also with HD7790, R9 290X
       
      14.12.2017
      Support VEGA here
       
      13.12.2017
      Version for test modern cards
      RadeonPCI5.kext.zip
×