Jump to content
Mieze

Tracing back the AMD GPU wakeup issue to its origin

365 posts in this topic

Recommended Posts

How is this a bad idea? Having a repo of different SSDT/DSDT settings for different types of AMD GPUs is exactly what is needed. The GPU section of both are generally the same.

Yup

Share this post


Link to post
Share on other sites
Advertisement

How is this a bad idea? Having a repo of different SSDT/DSDT settings for different types of AMD GPUs is exactly what is needed. The GPU section of both are generally the same.

I see his point if it includes CPU, Audio, Ethernet, WiFi or other fixes that are mobo or CPU dependent and for a specific user. But if they are only simple graphics, graphics audio, and or graphics Framebuffer related they should work for most systems, I would think. As long as they are listed for specific models of cards, and porting is specified if applicable they could help a lot of people out.

Share this post


Link to post
Share on other sites

To make things a little bit more clear for those of us, which are "non coders" in real live: take a look at "slice"s example SSDT:

 

 

 

/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20161210-64(RM)
* Copyright (c) 2000 - 2016 Intel Corporation
*
* Disassembling to non-symbolic legacy ASL operators
*
* Disassembly of iASLXjEc7P.aml, Thu Nov 9 19:20:22 2017
*
* Original Table Header:
* Signature "SSDT"
* Length 0x00000123 (291)
* Revision 0x02
* Checksum 0x24
* OEM ID "Apple"
* OEM Table ID "Radeon"
* OEM Revision 0x00003000 (12288)
* Compiler ID "INTL"
* Compiler Version 0x20170929 (538380585)
*/
DefinitionBlock ("", "SSDT", 2, "Apple", "Radeon", 0x00003000)
{
External (_SB_.PCI0.PEG0.PEGP, DeviceObj) // (from opcode)

Scope (\_SB.PCI0.PEG0.PEGP)
{
OperationRegion (PCIB, PCI_Config, Zero, 0x0100)
Field (PCIB, AnyAcc, NoLock, Preserve)
{
Offset (0x10),
BAR0, 32,
BAR1, 32,
BAR2, 64,
BAR4, 32,
BAR5, 32
}

Method (_INI, 0, NotSerialized) // _INI: Initialize
{
If (LEqual (BAR5, Zero))
{
Store (BAR2, Local0)
}
Else
{
Store (BAR5, Local0)
}

OperationRegion (GREG, SystemMemory, And (Local0, 0xFFFFFFFFFFFFFFF0), 0x8000)
Field (GREG, AnyAcc, NoLock, Preserve)
{
Offset (0x6800),
GENA, 32,
GCTL, 32,
LTBC, 32,
Offset (0x6810),
PSBL, 32,
SSBL, 32,
PTCH, 32,
PSBH, 32,
SSBH, 32,
Offset (0x6848),
FCTL, 32,
Offset (0x6EF8),
MUMD, 32
}

Store (Zero, FCTL)
Store (Zero, PSBH)
Store (Zero, SSBH)
Store (Zero, LTBC)
Store (One, GENA)
Store (Zero, MUMD)
}
}
}

 

 

 

Now take alook at this specific part of the code:

DefinitionBlock ("", "SSDT", 2, "Apple", "Radeon", 0x00003000)
{
    External (_SB_.PCI0.PEG0.PEGP, DeviceObj)    // (from opcode)

    Scope (\_SB.PCI0.PEG0.PEGP)
    {

This part is ALLWAYS DSDT-specific, cause you need to know, where in your DSDT your SSDT-related hardware needs to be injected.

 

For another example lets take a look at my RX580-realted SSDT:

DefinitionBlock ("", "SSDT", 2, "MvO_2", "PegSsdt", 0x00001000)
{
    External (_SB_.GGOV, MethodObj)    // 1 Arguments (from opcode)
    External (_SB_.ISME, MethodObj)    // 1 Arguments (from opcode)
    External (_SB_.PCI0, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG0, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG0.PEGP, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG1, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG1.PEGP, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG2, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG2.PEGP, DeviceObj)    // (from opcode)
.
.
.
.

    If (CondRefOf (\_SB.PCI0.PEG0.PEGP))
    {
        Scope (\_SB.PCI0.PEG0.PEGP)
        {
            Device (AMD0)
            {
                Name (_ADR, 0x00080000)  // _ADR: Address
                Device (GFX0)
                {
                   Name (_ADR, Zero)  // _ADR: Address

As you can see here, my GPU normally would be injected under "_SB.PCI0.PEG0.PEGP.pci-bridge@8.pci-bridge@0" which i have renamed to "_SB.PCI0.PEG0.PEGP.AMD0.GFX0".

And exactly THIS is always specific to the users DSDT.

 

What than follows, is only related to the users used GFX-Model and could be configured with specific values as part of the users used gfx-card.

And it is adviced to, after you know your correct path of your used gfx-card, to insert directly Miezes code first, so it would look like this:

        Scope (\_SB.PCI0.PEG0.PEGP)
        {
            Device (AMD0)
            {
                Name (_ADR, 0x00080000)  // _ADR: Address
                Device (GFX0)
                {
                    Name (_ADR, Zero)  // _ADR: Address
                    OperationRegion (PCIB, PCI_Config, Zero, 0x0100)
                    Field (PCIB, AnyAcc, NoLock, Preserve)
                    {
                        Offset (0x10), 
                        BAR0,   32, 
                        BAR1,   32, 
                        BAR2,   64, 
                        BAR4,   32, 
                        BAR5,   32
                    }

                    Method (_INI, 0, NotSerialized)  // _INI: Initialize
                    {
                        If (LEqual (BAR5, Zero))
                        {
                            Store (BAR2, Local0)
                        }
                        Else
                        {
                            Store (BAR5, Local0)
                        }

                        OperationRegion (GREG, SystemMemory, And (Local0, 0xFFFFFFFFFFFFFFF0), 0x8000)
                        Field (GREG, AnyAcc, NoLock, Preserve)
                        {
                            Offset (0x6800), 
                            GENA,   32, 
                            GCTL,   32, 
                            LTBC,   32, 
                            Offset (0x6810), 
                            PSBL,   32, 
                            SSBL,   32, 
                            PTCH,   32, 
                            PSBH,   32, 
                            SSBH,   32, 
                            Offset (0x6848), 
                            FCTL,   32, 
                            Offset (0x6EF8), 
                            MUMD,   32
                        }

                        Store (Zero, FCTL)
                        Store (Zero, PSBH)
                        Store (Zero, SSBH)
                        Store (Zero, LTBC)
                        Store (One, GENA)
                        Store (Zero, MUMD)
                    }


followed by your card-specific values like Device-ID, VendorID, Subsystem-ID, Slot-name, Model name, used Frambuffer etc. Example again:

Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
                    {
                        Store (Package (0x06)
                            {
                                "@0,name", 
                                Buffer (0x0C)
                                {
                                    "ATY,Orinoco"
                                }, 

                                "AAPL,slot-name", 
                                Buffer (0x08)
                                {
                                    "PCIe #1"
                                }, 

                                "hda-gfx", 
                                Buffer (0x0A)
                                {
                                    "onboard-1"
                                }
                            }, Local0)
                        DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                        Return (Local0)
                    }

So to stay with the example of MY specific implementation of MY specific RX480, the complete Code would look like this:

 /*
 * Intel ACPI Component Architecture
 * AML/ASL+ Disassembler version 20161210-64(RM)
 * Copyright (c) 2000 - 2016 Intel Corporation
 * 
 * Disassembling to non-symbolic legacy ASL operators
 *
 * Disassembly of iASLneKcV3.aml, Thu Nov  9 19:45:36 2017
 *
 * Original Table Header:
 *     Signature        "SSDT"
 *     Length           0x000026B7 (9911)
 *     Revision         0x02
 *     Checksum         0xD4
 *     OEM ID           "MvO_2"
 *     OEM Table ID     "PegSsdt"
 *     OEM Revision     0x00001000 (4096)
 *     Compiler ID      "INTL"
 *     Compiler Version 0x20161210 (538317328)
 */
DefinitionBlock ("", "SSDT", 2, "MvO_2", "PegSsdt", 0x00001000)
{
    External (_SB_.GGOV, MethodObj)    // 1 Arguments (from opcode)
    External (_SB_.ISME, MethodObj)    // 1 Arguments (from opcode)
    External (_SB_.PCI0, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG0, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG0.PEGP, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG1, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG1.PEGP, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG2, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG2.PEGP, DeviceObj)    // (from opcode)
    External (_SB_.SGOV, MethodObj)    // 2 Arguments (from opcode)
    External (_SB_.SHPO, MethodObj)    // 2 Arguments (from opcode)

   If (CondRefOf (\_SB.PCI0.PEG0.PEGP))
    {
        Scope (\_SB.PCI0.PEG0.PEGP)
        {
            Device (AMD0)
            {
                Name (_ADR, 0x00080000)  // _ADR: Address
                Device (GFX0)
                {
                    Name (_ADR, Zero)  // _ADR: Address
                    OperationRegion (PCIB, PCI_Config, Zero, 0x0100) // <--- from here...
                    Field (PCIB, AnyAcc, NoLock, Preserve)
                    {
                        Offset (0x10), 
                        BAR0,   32, 
                        BAR1,   32, 
                        BAR2,   64, 
                        BAR4,   32, 
                        BAR5,   32
                    }

                    Method (_INI, 0, NotSerialized)  // _INI: Initialize
                    {
                        If (LEqual (BAR5, Zero))
                        {
                            Store (BAR2, Local0)
                        }
                        Else
                        {
                            Store (BAR5, Local0)
                        }

                        OperationRegion (GREG, SystemMemory, And (Local0, 0xFFFFFFFFFFFFFFF0), 0x8000)
                        Field (GREG, AnyAcc, NoLock, Preserve)
                        {
                            Offset (0x6800), 
                            GENA,   32, 
                            GCTL,   32, 
                            LTBC,   32, 
                            Offset (0x6810), 
                            PSBL,   32, 
                            SSBL,   32, 
                            PTCH,   32, 
                            PSBH,   32, 
                            SSBH,   32, 
                            Offset (0x6848), 
                            FCTL,   32, 
                            Offset (0x6EF8), 
                            MUMD,   32
                        }

                        Store (Zero, FCTL)
                        Store (Zero, PSBH)
                        Store (Zero, SSBH)
                        Store (Zero, LTBC)
                        Store (One, GENA)
                        Store (Zero, MUMD)
                    } // <--- to here is MIEZEs code to get it work w/o LILU and WhatEverGreen

                    Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method  // <--- from here...
                    {
                        Store (Package (0x06)
                            {
                                "@0,name", 
                                Buffer (0x0C)
                                {
                                    "ATY,Orinoco"
                                }, 

                                "AAPL,slot-name", 
                                Buffer (0x08)
                                {
                                    "PCIe #1"
                                }, 

                                "hda-gfx", 
                                Buffer (0x0A)
                                {
                                    "onboard-1"
                                }
                            }, Local0)
                        DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                        Return (Local0)
                    }
                }

                Device (HDAU)
                {
                    Name (_ADR, One)  // _ADR: Address
                    Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
                    {
                        If (LEqual (Arg2, Zero))
                        {
                            Return (Buffer (One)
                            {
                                 0x03                                           
                            })
                        }

                        Return (Package (0x04)
                        {
                            "layout-id", 
                            Buffer (0x04)
                            {
                                 0x01, 0x00, 0x00, 0x00                         
                            }, 

                            "hda-gfx", 
                            Buffer (0x0A)
                            {
                                "onboard-1"
                            }
                        })
                    }
                }
            } // <--- to here your specific GFX-Card values to be used

            Method (DTGP, 5, NotSerialized)
            {
                If (LEqual (Arg0, ToUUID ("a0b5b7c6-1318-441c-b0c9-fe695eaf949b")))
                {
                    If (LEqual (Arg1, One))
                    {
                        If (LEqual (Arg2, Zero))
                        {
                            Store (Buffer (One)
                                {
                                     0x03                                           
                                }, Arg4)
                            Return (One)
                        }

                        If (LEqual (Arg2, One))
                        {
                            Return (One)
                        }
                    }
                }

                Store (Buffer (One)
                    {
                         0x00                                           
                    }, Arg4)
                Return (Zero)
            }

            Name (LTRE, Zero)
            OperationRegion (PCIS, PCI_Config, Zero, 0x0100)
            Field (PCIS, AnyAcc, NoLock, Preserve)
            {
                PVID,   16, 
                PDID,   16
            }

            Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
            {
                Return (GPRW (0x69, 0x04))
            }
        }
    }
}

Share this post


Link to post
Share on other sites

I included this patch in Clover 4296 so you need no more patch DSDT or separate SSDT.

See explanation here    #87   

Could confirm it working.

Just tick "inject ATI = true" and "RadeonDeInit = true" makes my Sapphire RX480 NITRO work as when using selfmade SSDT for it. Thank you SLICE.

BUT: i still need my SSDT for working HDMI-audio. but if you only need to make your RADEON work, you could use this method.

Share this post


Link to post
Share on other sites

Poor guys!

For those who use Clover there is no more needs in this SSDT-AMD.aml.

tested on RX480, working great except HDMI audio. Can CLOVER fix this too in feature update? Or we need to use SSDT for audio over HDMI?

Share this post


Link to post
Share on other sites

I included this patch in Clover 4296 so you need no more patch DSDT or separate SSDT.

See explanation here    #87   

it's mean we don't need SSDT-AMD.aml anymore?

 

@Pabloesc

I'm using this patched for my HD 7790: 

48442038 787878 to 48442037 373930

but why still shown HD 8xxx ?

 

thanks for advanced

Share this post


Link to post
Share on other sites

I included this patch in Clover 4296 so you need no more patch DSDT or separate SSDT.

See explanation here    #87   

hi slice..thank you for your great work....this method is much easier than ssdt-amd.aml...but it can display the correct amd card model?? thanks

Share this post


Link to post
Share on other sites

it's mean we don't need SSDT-AMD.aml anymore?

 

@Pabloesc

I'm using this patched for my HD 7790: 

48442038 787878 to 48442037 373930

but why still shown HD 8xxx ?

 

thanks for advanced

 

hi slice..thank you for your great work....this method is much easier than ssdt-amd.aml...but it can display the correct amd card model?? thanks

 

This is only trick against wake into black screen.

But those  recommendations      [HOW TO] Make Radeon {Desktop or Mobility} be working by using Clover     are still on the march.

 

I will think about the model name. If you don't use Inject->ATI=YES then the model chosen automatically.

There is a trick to rename HD6xxx -> "your name" 

			<dict>
				<key>Comment</key>
				<string>ATI name HD xxxx - HD6450</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				SEQgNnh4eA==
				</data>
				<key>MatchOS</key>
				<string>10.12,10.13</string>
				<key>Name</key>
				<string>AMD6000Controller</string>
				<key>Replace</key>
				<data>
				SEQgNjQ1MA==
				</data>
			</dict>

But it is not  easy to reproduce.

Share this post


Link to post
Share on other sites

tested on RX480, working great except HDMI audio. Can CLOVER fix this too in feature update? Or we need to use SSDT for audio over HDMI?

No problem to use SSDT with this new trick.

Share this post


Link to post
Share on other sites

Not working Amd 390X Asus Strix, tried al combination possible in Bios and Ati Inject Yes and No. 

 

- Connectors problem?

- If someone wants to cooperate and need a compiled Darwin or sth like that just tell me and I will add the file.

Share this post


Link to post
Share on other sites

Not working Amd 390X Asus Strix, tried al combination possible in Bios and Ati Inject Yes and No. 

 

- Connectors problem?

- If someone wants to cooperate and need a compiled Darwin or sth like that just tell me and I will add the file.

Does it have the 9300controllerkext ID 0x73001002? They dedicated a whole controllerkext but there is no matching ID in the accelerator kexts. If Apple assigned a whole controllerkext to that card only hopefully they are going to add a 5150kext or something just for that card very soon. We tried adding the ID to the 5000kexts, the 4150, 4250, 4000 etc. nothing takes.

@mork nice explanation, I'm just wondering how to inject a custom SSDT for GPU? what I did so far is copy and replace the code in DSDT.aml generated by clover and saved it into /EFI/acpi/patched...

 

but what to do with the SSDT-AMD.aml. How would you inject just this file? Does clover automatically scan the ACPI/patched folder or?

Slice added it to clover 4296 so it’s automatic if selected in options, before we were adding the SSDZt to Clover ACPI/Pathced folder.

Share this post


Link to post
Share on other sites

You asked about the injection method not how to compile it?

I thought there was an easier method without compiling it, my mistake I guess.. Anyways, deleted my above comments, since I dont want to spam this thread...

Share this post


Link to post
Share on other sites

@Gigamaxx

I don´t understand what are you saying.

If I have to force a kext, or you know the apple devs and you are waiting for an Id.

 

I think 390x is the same as 290x, and maybe is to add something into the ssdt.

Share this post


Link to post
Share on other sites

@Gigamaxx

I don´t understand what are you saying.

If I have to force a kext, or you know the apple devs and you are waiting for an Id.

 

I think 390x is the same as 290x, and maybe is to add something into the ssdt.

I tried to help someone with their Fury card with ID 0x73001002.    Is this the same card you have with HBM memory?    There is a AMD9300Controllerkext with only 0x73001002 ID  and no other IDs in that kext.   However no matter which accelerator kext we used ie.. AMD5000kext, AMD4250kext, AMD4150kext, AMD4000kext by adding an ID 0x73001002 to info.plist the card never worked.    I noticed that the AMD5000kext has Vega IDs and also there is one more Kext with the IDs in the info.plist.    So the Vega branch of graphics drivers contain 3 kexts with the Vega device IDs.    Most OSX graphics supported cards (AMD) use only 2 kexts.     If the Fury card 0x73001002 is to work with the AMD5000kext then you have to add the 0x73001002 to 2 kexts in the 5000 bundle.   The AMDX5000HWServiceskext.    You could try to add that ID to both the AMD5000kext and the HWServiceskext to see if the AMD9300Controllerkext will link with it.   The user I tried to assist may not have added the info.plist edits correctly so it may work.   It may be worth trying, but if you have that card ID you cannot currently use the card because the ID is missing from the existing kexts.  I think they will add a AMD5150kext or something similar like the did with Polaris cards in Sierra.    In Sierra we were able to use Polaris cards by adding these IDs in the various kexts.

post-1753549-0-35946400-1510419483_thumb.png

post-1753549-0-48335100-1510419698_thumb.png

Share this post


Link to post
Share on other sites

@Gigamaxx

 

Amd 390X/290X

 

DeviceID 0x67B11002

AMD8000Controller and AMDX4000

Hawaii

Baladi framebuffer

 

Sorry, I thought it was fury card.    Did you check for IDs in the 4000kext?

@Gigamaxx

 

Amd 390X/290X

 

DeviceID 0x67B11002

AMD8000Controller and AMDX4000

Hawaii

Baladi framebuffer?    Here are edited kexts, save extra originals, install these and then use kext wizard before reboot.

 

Try these edited kexts for 0x67B11002 use kext wizard before reboot.

AMD 0x67B11002 kexts.zip

Share this post


Link to post
Share on other sites

Sorry, I thought it was fury card.    Did you check for IDs in the 4000kext?

 

 

Try these edited kexts for 0x67B11002 use kext wizard before reboot.

 

@Gigamaxx

 

Amd 390X/290X

 

DeviceID 0x67B11002

AMD8000Controller and AMDX4000

Hawaii

Baladi framebuffer

 

 

Sorry, I thought it was fury card.    Did you check for IDs in the 4000kext?

 

 

Try these edited kexts for 0x67B11002 use kext wizard before reboot.

 

DeviceID 0x67B11002

 

That's the Device ID for R9 290 non X

Share this post


Link to post
Share on other sites

For the 290X proper naming patch it's 

AMD8000Controller

Find: 414d4420 52616465 6f6e2048 44203878 7878

replace: 41 4d 44 20 52 61 64 65 6f 6e 20 52 39 20 32 39 30 58

 

For 390x replace: 41 4d 44 20 52 61 64 65 6f 6e 20 52 39 20 33 39 30 58

 

if you want 490x for kicks well Replace : 41 4d 44 20 52 61 64 65 6f 6e 20 52 39 20 34 39 30 58

 

for newest 10.13.2 beta find:414d4420 52616465 6f6e2048 44203878 7878 

replace: 41 4d 44 20 52 61 64 65 6f 6e 20 52 39 20 32 39 30 58

Clover Patch Works Thanks 

Share this post


Link to post
Share on other sites

For the 290X proper naming patch it's 

AMD8000Controller

Find: 414d4420 52616465 6f6e2048 44203878 7878

replace: 41 4d 44 20 52 61 64 65 6f 6e 20 52 39 20 32 39 30 58

 

Clover Patch Works Thanks 

Did you test the SSDT? Does it work?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By BlitzPanzer
      Catalina 10.15.3, OC 0.5.5

      Follow the OpenCore AMD Vanilla Guide, everything works fine iMessage, Siri, FaceTime, Continuity, Airdrop, Audio, WiFi
      But here is the problem
      Once I restart or shutdown and reboot, I will have kernel panic, so i have to reboot once again, then no more kernel panic, straight back to the system.
      Down below are the 3 kernel panic reports I got after I am back to the system, also provided specs, kexts, drivers and config.plist I used.
      Please someone help me with the problem
      Thanks in advanced   

      System Specs
      CPU: Ryzen R5 3600
      MOBO: MSI B450 Mortar Max
      RAM: Kingston HyperX Fury 16GB*2 3200MHz DDR4
      SSD: Kingston A2000 500GB NVMe PCIe
      GPU: Gigabyte RX 570 Gaming 4G v2.0
      PCIe: BCM943602CS Kexts:
      AppleALC
      AppleMCEReporterDisabler
      BrcmBluetoothInjector
      BrcmPatchRAM3
      HDMIAudio
      Lilu
      MacProMemoryNotificationDisabler
      NightShiftUnlocker
      NVMeFix
      RealtekRTL8111
      VirtualSMC
      WhateverGreen Drivers:
      ApfsDriverLoader
      AppleUsbKbDxe
      FwRuntimeServices
      VBoxHfs config.plist:
      https://drive.google.com/file/d/1M22Tvn7W-Zf_b_-J52oLcfjECj5qAcp6/view

      Kernel Panic Report 1
      panic(cpu 0 caller 0xffffff801b8652fa): Kernel trap at 0xffffff7f9f212fe3, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0xffffffa3ce87c000, CR3: 0x00000000263ba000, CR4: 0x00000000003406e0 RAX: 0xffffffa3ce87c000, RBX: 0x0000000000005434, RCX: 0x0000000002000000, RDX: 0x0000000003000000 RSP: 0xffffffa3ce75bb60, RBP: 0xffffffa3ce75bb80, RSI: 0xffffff806d3141c0, RDI: 0x0000000000000000 R8: 0x0000000000000001, R9: 0x0000000000000026, R10: 0x00000000f8000000, R11: 0x0000000000000070 R12: 0xffffff805cc7c900, R13: 0xffffff835806f000, R14: 0x0000000000000000, R15: 0xffffff8068d2da50 RFL: 0x0000000000010246, RIP: 0xffffff7f9f212fe3, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0xffffffa3ce87c000, Error code: 0x0000000000000002, Fault CPU: 0x0, PL: 0, VF: 1 Backtrace (CPU 0), Frame : Return Address 0xffffffa3ce75b5c0 : 0xffffff801b73bb2b mach_kernel : _handle_debugger_trap + 0x47b 0xffffffa3ce75b610 : 0xffffff801b8734d5 mach_kernel : _kdp_i386_trap + 0x155 0xffffffa3ce75b650 : 0xffffff801b864f4e mach_kernel : _kernel_trap + 0x4ee 0xffffffa3ce75b6a0 : 0xffffff801b6e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffffa3ce75b6c0 : 0xffffff801b73b217 mach_kernel : _DebuggerTrapWithState + 0x17 0xffffffa3ce75b7c0 : 0xffffff801b73b5fb mach_kernel : _panic_trap_to_debugger + 0x21b 0xffffffa3ce75b810 : 0xffffff801bed2aa9 mach_kernel : _panic + 0x61 0xffffffa3ce75b880 : 0xffffff801b8652fa mach_kernel : _sync_iss_to_iks + 0x2aa 0xffffffa3ce75ba00 : 0xffffff801b864ff8 mach_kernel : _kernel_trap + 0x598 0xffffffa3ce75ba50 : 0xffffff801b6e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffffa3ce75ba70 : 0xffffff7f9f212fe3 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4readEj + 0x53 0xffffffa3ce75bb80 : 0xffffff7f9f24a795 com.apple.kext.AMDRadeonX4000 : __ZN28AMDRadeonX4000_AMDVIHardware19getRegisterAperSizeEv + 0x23 0xffffffa3ce75bba0 : 0xffffff7f9f212ef0 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4initEP11IOPCIDeviceP30AMDRadeonX4000_IAMDHWInterface + 0xfa 0xffffffa3ce75bbe0 : 0xffffff7f9f2325c1 com.apple.kext.AMDRadeonX4000 : __ZN26AMDRadeonX4000_AMDHardware4initEP11IOPCIDeviceP28AMDRadeonX4000_IAMDHWHandlerRjP16_GART_PARAMETERSP14_FB_PARAMETERS + 0x257 0xffffffa3ce75bc30 : 0xffffff7f9f1b8adb com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator17createHWInterfaceEP11IOPCIDevice + 0x7b 0xffffffa3ce75bc70 : 0xffffff7f9f1b64be com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator15configureDeviceEP11IOPCIDevice + 0x10a 0xffffffa3ce75bd00 : 0xffffff7f9f128534 com.apple.iokit.IOAcceleratorFamily2 : __ZN22IOGraphicsAccelerator25startEP9IOService + 0x21e 0xffffffa3ce75bd80 : 0xffffff7f9f1b488e com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator5startEP9IOService + 0x82 0xffffffa3ce75bde0 : 0xffffff801be1b216 mach_kernel : __ZN9IOService14startCandidateEPS_ + 0xf6 0xffffffa3ce75be40 : 0xffffff801be1adc1 mach_kernel : __ZN9IOService15probeCandidatesEP12OSOrderedSet + 0xb21 0xffffffa3ce75bef0 : 0xffffff801be1a10e mach_kernel : __ZN9IOService14doServiceMatchEj + 0x2ce 0xffffffa3ce75bf50 : 0xffffff801be1c8ad mach_kernel : __ZN15_IOConfigThread4mainEPvi + 0x15d 0xffffffa3ce75bfa0 : 0xffffff801b6e213e mach_kernel : _call_continuation + 0x2e Kernel Extensions in backtrace: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f9f0f0000->0xffffff7f9f1b2fff dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[A243D030-19AC-30AA-AC70-6C786DF9E6CE]@0xffffff7f9c185000 dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9c2f8000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f9d454000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9df73000 dependency: com.apple.iokit.IOReportFamily(47)[988360A2-2E10-3014-A119-BE81BC045A10]@0xffffff7f9c228000 com.apple.kext.AMDRadeonX4000(3.0.5)[5FD7AE5F-C03C-34A1-803F-ACA9B68524D0]@0xffffff7f9f1b3000->0xffffff7f9f6f7fff dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9c2f8000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f9d454000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9df73000 dependency: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f9f0f0000 BSD process name corresponding to current thread: kernel_task Boot args: debug=0x100 keepsyms=1 alcid=1 -v shikigva=128 Mac OS version: 19D76 Kernel version: Darwin Kernel Version 19.3.0: Thu Jan 9 20:58:23 PST 2020; root:xnu-6153.81.5~1/RELEASE_X86_64 Kernel UUID: A8DDE75C-CD97-3C37-B35D-1070CC50D2CE Kernel slide: 0x000000001b400000 Kernel text base: 0xffffff801b600000 __HIB text base: 0xffffff801b500000 System model name: MacPro7,1 (Mac-27AD2F918AE68F61) System shutdown begun: NO Panic diags file available: NO (0xe00002bc) System uptime in nanoseconds: 47565362999  
      Kernel Panic Report 2
      panic(cpu 10 caller 0xffffff801b8652fa): Kernel trap at 0xffffff7f9e629fe3, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0xffffff83d25d2000, CR3: 0x0000000029068000, CR4: 0x00000000003406e0 RAX: 0xffffff83d25d2000, RBX: 0x0000000000005434, RCX: 0x0000000002000000, RDX: 0x0000000003000000 RSP: 0xffffff83d14c3b60, RBP: 0xffffff83d14c3b80, RSI: 0xffffff805f6adb80, RDI: 0x0000000000000000 R8: 0x0000000000000001, R9: 0x0000000000000026, R10: 0x00000000f8000000, R11: 0x0000000000000070 R12: 0xffffff805fba2580, R13: 0xffffff835b02e000, R14: 0x0000000000000000, R15: 0xffffff80631191e0 RFL: 0x0000000000010246, RIP: 0xffffff7f9e629fe3, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0xffffff83d25d2000, Error code: 0x0000000000000002, Fault CPU: 0xa, PL: 0, VF: 1 Backtrace (CPU 10), Frame : Return Address 0xffffff83d14c35c0 : 0xffffff801b73bb2b mach_kernel : _handle_debugger_trap + 0x47b 0xffffff83d14c3610 : 0xffffff801b8734d5 mach_kernel : _kdp_i386_trap + 0x155 0xffffff83d14c3650 : 0xffffff801b864f4e mach_kernel : _kernel_trap + 0x4ee 0xffffff83d14c36a0 : 0xffffff801b6e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d14c36c0 : 0xffffff801b73b217 mach_kernel : _DebuggerTrapWithState + 0x17 0xffffff83d14c37c0 : 0xffffff801b73b5fb mach_kernel : _panic_trap_to_debugger + 0x21b 0xffffff83d14c3810 : 0xffffff801bed2aa9 mach_kernel : _panic + 0x61 0xffffff83d14c3880 : 0xffffff801b8652fa mach_kernel : _sync_iss_to_iks + 0x2aa 0xffffff83d14c3a00 : 0xffffff801b864ff8 mach_kernel : _kernel_trap + 0x598 0xffffff83d14c3a50 : 0xffffff801b6e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d14c3a70 : 0xffffff7f9e629fe3 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4readEj + 0x53 0xffffff83d14c3b80 : 0xffffff7f9e661795 com.apple.kext.AMDRadeonX4000 : __ZN28AMDRadeonX4000_AMDVIHardware19getRegisterAperSizeEv + 0x23 0xffffff83d14c3ba0 : 0xffffff7f9e629ef0 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4initEP11IOPCIDeviceP30AMDRadeonX4000_IAMDHWInterface + 0xfa 0xffffff83d14c3be0 : 0xffffff7f9e6495c1 com.apple.kext.AMDRadeonX4000 : __ZN26AMDRadeonX4000_AMDHardware4initEP11IOPCIDeviceP28AMDRadeonX4000_IAMDHWHandlerRjP16_GART_PARAMETERSP14_FB_PARAMETERS + 0x257 0xffffff83d14c3c30 : 0xffffff7f9e5cfadb com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator17createHWInterfaceEP11IOPCIDevice + 0x7b 0xffffff83d14c3c70 : 0xffffff7f9e5cd4be com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator15configureDeviceEP11IOPCIDevice + 0x10a 0xffffff83d14c3d00 : 0xffffff7f9e52a534 com.apple.iokit.IOAcceleratorFamily2 : __ZN22IOGraphicsAccelerator25startEP9IOService + 0x21e 0xffffff83d14c3d80 : 0xffffff7f9e5cb88e com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator5startEP9IOService + 0x82 0xffffff83d14c3de0 : 0xffffff801be1b216 mach_kernel : __ZN9IOService14startCandidateEPS_ + 0xf6 0xffffff83d14c3e40 : 0xffffff801be1adc1 mach_kernel : __ZN9IOService15probeCandidatesEP12OSOrderedSet + 0xb21 0xffffff83d14c3ef0 : 0xffffff801be1a10e mach_kernel : __ZN9IOService14doServiceMatchEj + 0x2ce 0xffffff83d14c3f50 : 0xffffff801be1c8ad mach_kernel : __ZN15_IOConfigThread4mainEPvi + 0x15d 0xffffff83d14c3fa0 : 0xffffff801b6e213e mach_kernel : _call_continuation + 0x2e Kernel Extensions in backtrace: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f9e4f2000->0xffffff7f9e5b5fff dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[A243D030-19AC-30AA-AC70-6C786DF9E6CE]@0xffffff7f9c3f1000 dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9c4a6000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f9e4c1000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9c793000 dependency: com.apple.iokit.IOReportFamily(47)[988360A2-2E10-3014-A119-BE81BC045A10]@0xffffff7f9c09f000 com.apple.kext.AMDRadeonX4000(3.0.5)[5FD7AE5F-C03C-34A1-803F-ACA9B68524D0]@0xffffff7f9e5ca000->0xffffff7f9eb0efff dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9c4a6000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f9e4c1000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9c793000 dependency: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f9e4f2000 BSD process name corresponding to current thread: kernel_task Boot args: debug=0x100 keepsyms=1 alcid=1 -v shikigva=128 Mac OS version: 19D76 Kernel version: Darwin Kernel Version 19.3.0: Thu Jan 9 20:58:23 PST 2020; root:xnu-6153.81.5~1/RELEASE_X86_64 Kernel UUID: A8DDE75C-CD97-3C37-B35D-1070CC50D2CE Kernel slide: 0x000000001b400000 Kernel text base: 0xffffff801b600000 __HIB text base: 0xffffff801b500000 System model name: MacPro7,1 (Mac-27AD2F918AE68F61) System shutdown begun: NO Panic diags file available: NO (0xe00002bc) System uptime in nanoseconds: 38416992755  
      Kernel Panic Report 3
      panic(cpu 8 caller 0xffffff801da652fa): Kernel trap at 0xffffff7fa084dfe3, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0xffffff83d44cd000, CR3: 0x000000002b260000, CR4: 0x00000000003406e0 RAX: 0xffffff83d44cd000, RBX: 0x0000000000005434, RCX: 0x0000000002000000, RDX: 0x0000000003000000 RSP: 0xffffff83d319bb60, RBP: 0xffffff83d319bb80, RSI: 0xffffff8066659c00, RDI: 0x0000000000000000 R8: 0x0000000000000001, R9: 0x0000000000000026, R10: 0x00000000f8000000, R11: 0x0000000000000070 R12: 0xffffff8061f35280, R13: 0xffffff835d231000, R14: 0x0000000000000000, R15: 0xffffff806189db90 RFL: 0x0000000000010246, RIP: 0xffffff7fa084dfe3, CS: 0x0000000000000008, SS: 0x0000000000000000 Fault CR2: 0xffffff83d44cd000, Error code: 0x0000000000000002, Fault CPU: 0x8, PL: 0, VF: 1 Backtrace (CPU 8), Frame : Return Address 0xffffff83d319b5c0 : 0xffffff801d93bb2b mach_kernel : _handle_debugger_trap + 0x47b 0xffffff83d319b610 : 0xffffff801da734d5 mach_kernel : _kdp_i386_trap + 0x155 0xffffff83d319b650 : 0xffffff801da64f4e mach_kernel : _kernel_trap + 0x4ee 0xffffff83d319b6a0 : 0xffffff801d8e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d319b6c0 : 0xffffff801d93b217 mach_kernel : _DebuggerTrapWithState + 0x17 0xffffff83d319b7c0 : 0xffffff801d93b5fb mach_kernel : _panic_trap_to_debugger + 0x21b 0xffffff83d319b810 : 0xffffff801e0d2aa9 mach_kernel : _panic + 0x61 0xffffff83d319b880 : 0xffffff801da652fa mach_kernel : _sync_iss_to_iks + 0x2aa 0xffffff83d319ba00 : 0xffffff801da64ff8 mach_kernel : _kernel_trap + 0x598 0xffffff83d319ba50 : 0xffffff801d8e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d319ba70 : 0xffffff7fa084dfe3 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4readEj + 0x53 0xffffff83d319bb80 : 0xffffff7fa0885795 com.apple.kext.AMDRadeonX4000 : __ZN28AMDRadeonX4000_AMDVIHardware19getRegisterAperSizeEv + 0x23 0xffffff83d319bba0 : 0xffffff7fa084def0 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4initEP11IOPCIDeviceP30AMDRadeonX4000_IAMDHWInterface + 0xfa 0xffffff83d319bbe0 : 0xffffff7fa086d5c1 com.apple.kext.AMDRadeonX4000 : __ZN26AMDRadeonX4000_AMDHardware4initEP11IOPCIDeviceP28AMDRadeonX4000_IAMDHWHandlerRjP16_GART_PARAMETERSP14_FB_PARAMETERS + 0x257 0xffffff83d319bc30 : 0xffffff7fa07f3adb com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator17createHWInterfaceEP11IOPCIDevice + 0x7b 0xffffff83d319bc70 : 0xffffff7fa07f14be com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator15configureDeviceEP11IOPCIDevice + 0x10a 0xffffff83d319bd00 : 0xffffff7fa074e534 com.apple.iokit.IOAcceleratorFamily2 : __ZN22IOGraphicsAccelerator25startEP9IOService + 0x21e 0xffffff83d319bd80 : 0xffffff7fa07ef88e com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator5startEP9IOService + 0x82 0xffffff83d319bde0 : 0xffffff801e01b216 mach_kernel : __ZN9IOService14startCandidateEPS_ + 0xf6 0xffffff83d319be40 : 0xffffff801e01adc1 mach_kernel : __ZN9IOService15probeCandidatesEP12OSOrderedSet + 0xb21 0xffffff83d319bef0 : 0xffffff801e01a10e mach_kernel : __ZN9IOService14doServiceMatchEj + 0x2ce 0xffffff83d319bf50 : 0xffffff801e01c8ad mach_kernel : __ZN15_IOConfigThread4mainEPvi + 0x15d 0xffffff83d319bfa0 : 0xffffff801d8e213e mach_kernel : _call_continuation + 0x2e Kernel Extensions in backtrace: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7fa0716000->0xffffff7fa07d9fff dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[A243D030-19AC-30AA-AC70-6C786DF9E6CE]@0xffffff7f9e5f1000 dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9e6a6000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7fa06e5000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9e993000 dependency: com.apple.iokit.IOReportFamily(47)[988360A2-2E10-3014-A119-BE81BC045A10]@0xffffff7f9e29f000 com.apple.kext.AMDRadeonX4000(3.0.5)[5FD7AE5F-C03C-34A1-803F-ACA9B68524D0]@0xffffff7fa07ee000->0xffffff7fa0d32fff dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9e6a6000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7fa06e5000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9e993000 dependency: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7fa0716000 BSD process name corresponding to current thread: kernel_task Boot args: debug=0x100 keepsyms=1 alcid=1 -v shikigva=128 Mac OS version: 19D76 Kernel version: Darwin Kernel Version 19.3.0: Thu Jan 9 20:58:23 PST 2020; root:xnu-6153.81.5~1/RELEASE_X86_64 Kernel UUID: A8DDE75C-CD97-3C37-B35D-1070CC50D2CE Kernel slide: 0x000000001d600000 Kernel text base: 0xffffff801d800000 __HIB text base: 0xffffff801d700000 System model name: MacPro7,1 (Mac-27AD2F918AE68F61) System shutdown begun: NO Panic diags file available: NO (0xe00002bc) System uptime in nanoseconds: 27776834167  
      config.plist
    • By Trung_Nguyen
      Hi, I'm using a Dell laptop, modeled Latitude E6230, bios version A11(I don't have any batteries to update :'( ).
      I'm using Catalina with OpenCore boot loader. 
      Everything is good, fast boot time.
      But when comes to sleeping there's 2 issues that randomly happen when the sleeping time is long enough:
      - Kernel Panic when sleep: panic log: panic
         This should have something to do with bluetooth, right? I'm using DW380 with BrcmPatchRam3 & BrcmBluetoothInjector.
      - Darkscreen when wakeup:
         After I open the lid, the screen have no backlight, although the UI barely shown.
         All I could do is to use keyboard to enter my password and use hotkey to shutdown the machine and then restart normally.
       
      The EFI/OC folder is attached below, with serial numbers removed.
      Sorry for using .txz format but with .zip, I couldn't get it fit in 10MB. Sorry for any inconvenience.
       
      P/s:If anybody try boot this in the future, please bear in mind that if you inject IO80211Family and AirportBrcm4331 (the one from 10.14.6) to any Recovery or installation media, it will panic the kernel, please disable those 2 before-hand.
       
      Thank you very much
       
      OC.txz
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://www.olarila.com/topic/5165-olarila-app-images-and-folders/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
        First... If you need DSDT edits... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation --Create a bootable copy of El Capitan /  Sierra / High Sierra / Mojave https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install EL Capitan / Sierra / High Sierra and boot into system!     Post Installation   --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/     --Reboot and activate video!   Bingo! Now you need a fine tune! DSDT Time!   My DSDT GA P35-DS3   DSDT.MaLd0n.zip     Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -LPC -HDEF -RTC -EHCI -UHCI -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF --Native Power Management
       
      Use Clover, check Generate P and C States
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --AUDIO
       
      Device HDEF + AppleAlc + Lilu
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://www.olarila.com/topic/5165-olarila-app-images-and-folders/   Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell   https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Skylake, Kabylake and Coffeelake is here https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
          First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
×