can somebody walkthrough with the mojave installation guide?
i have a mac high sierra 13.6 version on my macbook pro and want to install mojave on my desktop
Exact config is Gigabyte gaming wifi 7 motherboard amy ryzen 7 2nd gen 2700X processor Gigabyte G1 8GB grapgic card VEGA 64
running 2 nvme Samsung 256gb cards and 1 intel 180gb ssd internal and 1tb WD HDD, with 64 GB 3200Mhz Ram
When I Attempt to wake my Machine from sleep, the screen stays black, although the computer is obviously awake !
This Machine has a 1300W Power Supply So Sleep is Very Useful.
1) FIX_WAK and FixShutdown as per Clover Wiki.
2) Although I am using "SAPPHIRE Radeon PULSE RX 580 8GB GDDR5", which Should be completely Supported by Mojave, I Also changed the Part Number to "113-4E353BU-O4E" as per this Guide: http://www.xlr8yourmac.com/archives/feb18/RadeonRX-580_MacPro.html. The GPU is working GREAT without even Clover Inject
3) Tried to Run this command: disablehibernate.command.zip
4) Tried darkwake=0 to 10
5) Disabled wake on USB & Wake on LAN (BIOS)
sudo pmset -g
System-wide power settings:
Currently in use:
Sleep On Power Button 1
pmset -g assertions
2019-02-19 18:51:04 +0200
Assertion status system-wide:
Listed by owning process:
pid 56(powerd): [0x0000001700088000] 00:13:44 ExternalMedia named: "com.apple.powermanagement.externalmediamounted"
pid 100(hidd): [0x00000025000980a7] 00:00:00 UserIsActive named: "com.apple.iohideventsystem.queue.tickle.4294968578.17"
Timeout will fire in 600 secs Action=TimeoutActionRelease
pid 200(mds_stores): [0x0000034e000b8279] 00:00:00 BackgroundTask named: "com.apple.metadata.mds_stores.power"
Kernel Assertions: 0x4=USB
id=502 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d130000 owner=USB Keyboard
id=503 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d120000 owner=Lenovo Optical Mouse
Idle sleep preventers: IODisplayWrangler
CPU: 2x Xeon E5-2680 v2 2.8GHz Ten Core Processors
RAM: 128 GB 1333 MHz DDR3 ECC Memory
GPU: SAPPHIRE Radeon PULSE RX 580 8GB GDDR5
Chipset: Intel C602
Audio: Realtek ALC3220 (ALC280) High Definition Audio
SAS Drive Controllers (RAID): LSI 2308 SATA/SAS 6Gb/s controller with host based RAID 0, 1, 10 (4
Network Controller 1: Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support
Network Controller 2: Intel Ethernet Controller I210
NEC USB3.0 xHCI Controller: Renesas Electronics uPD720201 & uPD720202
Good morning, everyone, I'm sorry if I was wrong in choosing the topic but I need help. I have found it extremely difficult to mount a Hackintosh in my acer. Setup; I5 2430m 2.4
6GB RAM Mobo P5we0 - Intel
intel Graphics 3000 At the moment I have not found out what my audio codecs are. but I'll leave the link on the motherboard. however, my real problem is several. I have already used the itakos image, I have already used several images that could be installed normally and that after installing the image I do not have internet via cable or wireless. And another, I already looked in other forums and I know that I will be called a donkey in the logical question but I have not been able to install the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] or clover to start from the Hard Disk, so I do not know what to do.At the moment I still do not know if there has already been someone who has already installed the High Sierra or just the Sierra in this notebook model and obtained permanent success.
If anyone can help me, I'll be grateful.
Installations without success, but with the system already installed in ACER;
All with the same symptom. Starting only by the bootable USB stick and without internet connection via cable and wireless.
Acer 5750 Official Page