Jump to content
Sign in to follow this  
Followers 0
Egonaut

ASRock B85 Anniversary motherboard and Intel G3258 CPU Installation Files

4 posts in this topic

Recommended Posts

Haven't seen these in one spot yet, so here's what you'll need if you have this combination of components (A relatively popular one as it used to be featured on logicalincrements.com, but not anymore)

For booting into Clover, you'll need the FakeCPUID 0x0306A0. There's no other real, non-complicated way around this. You'll also need the iMac 13,2 SMBIOS (Ivy Bridge Model).

 

Use XNU Power Management instead of AICPM, the boot flag for this is: -xcpm

 

You'll also need some kexts, so go ahead and put these in your EFI folder

 

Audio Chipset: Realtek ALC662 (VoodooHDA - Attached)
LAN Chipset: Realtek 8111GR  (RealtekRTL8111.kext - Attached)

NullCPUManagement.kext (Attached)

OsxAptioFix2Drv-64 (Should be installed when you install Clover)

 

BIOS on UEFI defaults, with CSM set to UEFI.

With all of this, you should get a working installation up in no time. The rest depends upon your GPU, etc. I went ahead and wrote this up in a couple of minutes just a quick reference, I'll probably add more to this though.
 

Realtek ALC662 Audio Fix.zip

RealtekRTL8111.kext.zip

NullCPUPowerManagement.kext.zip

Share this post


Link to post
Share on other sites
Advertisement

I have a haswell g3258 cpu,  msi h81i Mainboard, 8gb ram, sandisk 120 ssd, nvidia gtx760.  Currently running sierra 10.12.6 successfully (xcpm power) with the Pikeralpha bootstrap patch (10.12.6) listed below and fakecpuid 0x0306A0. Changed config.plist for the HS 10.13 bootstrap patch as listed below to install released production version. I get kernel panic from applecpupowermangement immediatedly after reboot.  Does release version 10.13 require a new bootstrap patch other than the one listed below?


 


 


 


10.12~10.13


 


FakeCPUID


0x0306A0


 


cpuid_set_info_rdmsr © vit9696


b9a00100000f32


b9a001000031c0


10.12.x,10.13.x


 


xcpm_bootstrap - Ivy Bridge © Pike R. Alpha


83c3c483fb22


83c3c683fb22


10.12.5


 


xcpm_bootstrap - Ivy Bridge © Pike R. Alpha


8d43c483f822


8d43c683f822


10.12.6


 


xcpm_bootstrap - Ivy Bridge © Pike R. Alpha


89d804c43c22


89d804c63c22


10.13.x


 


if you have skylake pentium


xcpm_idle_wrmsr © Pike R. Alpha


b9e20000000f30


b9e20000009090


10.12.x,10.13.x

Share this post


Link to post
Share on other sites

 

I have a haswell g3258 cpu,  msi h81i Mainboard, 8gb ram, sandisk 120 ssd, nvidia gtx760.  Currently running sierra 10.12.6 successfully (xcpm power) with the Pikeralpha bootstrap patch (10.12.6) listed below and fakecpuid 0x0306A0. Changed config.plist for the HS 10.13 bootstrap patch as listed below to install released production version. I get kernel panic from applecpupowermangement immediatedly after reboot.  Does release version 10.13 require a new bootstrap patch other than the one listed below?

 

 

 

10.12~10.13

 

FakeCPUID

0x0306A0

 

cpuid_set_info_rdmsr © vit9696

b9a00100000f32

b9a001000031c0

10.12.x,10.13.x

 

xcpm_bootstrap - Ivy Bridge © Pike R. Alpha

83c3c483fb22

83c3c683fb22

10.12.5

 

xcpm_bootstrap - Ivy Bridge © Pike R. Alpha

8d43c483f822

8d43c683f822

10.12.6

 

xcpm_bootstrap - Ivy Bridge © Pike R. Alpha

89d804c43c22

89d804c63c22

10.13.x

 

if you have skylake pentium

xcpm_idle_wrmsr © Pike R. Alpha

b9e20000000f30

b9e20000009090

10.12.x,10.13.x

 

There's a rumor going around that 0x0306A0 is no longer supported/working in 10.13 - as to its validity, I don't know. I personally use it along with -xcpm and I managed to get everything working fine.  Our systems are different, albeit slightly, but the lack of a correct FakeCPUID or a missing NullCPUPowerManagement kext are the only things that have triggered that particular error on my system -  The general rule of thumb is that you shouldn't install or add a boot flag/patch/DSDT/SSDT/whatever, as long as you explicitly know what it is and why you need it. Using other users config files is a really easy way to break that rule, and therefore, your system, even if they have the exact same hardware, it should only be used as a reference, not a template.

 

But, I really can't speak authoritatively on it for you, as the system is different and I don't know all the details. Again, I've never had to mess around with bootstrap patches before with my G3258 & XCPM, AFAIK, even on Sierra. Have you attempted any clean installs? I recommend getting a hard drive that you can use a sandbox to test configurations/installations on before actually updating your main system, this is a whole new beast entirely when it comes to previous macOS releases.

 

If you'd like to talk in real time about the issue, I may be able to get you set up with someone who knows a bit more about those kinds of patches, read my signature for details.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By DOGER92
      Hi guys, I'm new to the world of Hackintosh. I write in this section because I have a problem with the graphics card of my laptop. As far as I understand from the web, it is not possible to use a dedicated graphics card on a laptop. So I'm trying to use the integrated processor one. The problem is that I have tried various procedures seen online, but in spite of this I cannot solve the problem. If you need this is the equipment of my laptop:

      Asus VivoBook Pro 15 N580VD-FI038T

      Screen: Led 15.6” 16:9 (Ultra HD 3480x2160).
      Chipset: Intel HM175.
      Cpu: Intel Core i7-7700HQ (2.80 GHz / 3.80 GHz, 4 core, 6 MB CACHE L3).
      Graphics Card: INTEL HD Graphics 630 + NVIDIA GeForce GTX 1050 4 GB GDDR5.
      Hard Disk: SSD M.2 512 GB SATA 3.0 + SSD 750GB.
      Ram: 32GB DDR4-2666.
      Audio: audio stereo Harman Kardon.
      Webcam: webcam HD with integrated headphone.
      Lan: Intel LAN 10/100/1000, Wi-Fi 802.11ac (2x2), Bluetooth 4.2.
      USB: 2 x USB 2.0, 1 x USB 3.0, 1 x USB 3.1 Type-C Gen 1, 1 x HDMI, 1 x LAN RJ-45, 1 x jack
      Slot: 1 x SD.

      I hope there is someone who can help me with this problem
    • By sierra2600
      The laptop in question: Acer TravelMate 8472 TM8472 (Model: ZQ3) (refer to the "Spoiler" at the end if you want the machine specs)
       
      "So what are you bugging us for?" Good question, because I am usually an introvert and usually just keep looking for answers but I could not find some. Jumping to it...
      What does not work and I would like thoughts on:
      Bluetooth does not register, used to on previous installs (sorry, I did not pay attention to see if this was caused by me updating to 10.8.5 but that was necessary for the below functions) (It does not work in Debian either - Ignore) LAN and WLAN  - I have found Kexts (somewhere, I think I just lost them... dang it...) for the WLAN but I have yet to try them, nothing for the LAN I know this is cheating but I read that The NDISulator for FreeBSD (HINT HINT) is a port of NDISwrapper for Linux that runs Windows XP network drivers in Linux or BSD Brightness controls work from the middle down on the "Sun" brightness overlay, I got this far from following this: https://www.insanelymac.com/forum/topic/287133-guide-backlight-brightness-for-intel-80860046-1st-gen-hd-gma-5700mhd/ but I am kind of thinking of trying: https://www.insanelymac.com/forum/topic/287133-guide-backlight-brightness-for-intel-80860046-1st-gen-hd-gma-5700mhd/?do=findComment&comment=2214344 . My "magic number" is: 0xF        I used DSDTEditor in Windows, since I figured all the drivers are loaded, to extract the DSDT and compile something that somewhat works... Wake from sleep issue - I tried the above guide for that but I get a no backlit display and I can see that the cursor in the password field is not flashing when I use an external light source, but it will reboot when I press Ctrl + Alt + Power "button" (it is actually a slider) and then also clear my freaking CMOS right down to the clock... yeah I have the ACPI fix implmented and it usually works... DVD Player.app reports that no viable video device was found (personally I don't care about the DVD Player.app problem, just wanted to put that out there for the heck of it) The microphone port always sounds like it is going through a [dirty] guitar effects petal no matter what sliders are adjusted  
      Likely causes of:
      Bluetooth (BCM92046), WIFI (BCM943225HM) - So, I USED TO be able to turn on the WIFI from within Windows then reboot into Mac OS and have it work but I noticed recently that the indicator light for them turns off BEFORE it reboots now. When Windows or Android load, it lights up- "No... really, captain obvious?!"... anyways... working "No really Sherlock!" so OBVIOUSLY, the OS has to activate them... and preferably ignore the wireless switching button For the WIFI module, if you omit the 9 and HM in a search, results appear! Brightness - Will get reset to full "Bright light! Bright light!" when a "Load System Defaults" is applied from within the BIOS settings but like the WIFI and Bluetooth the OS will forcefully take control of it Microphone In sounding dirty - me being lazy with the audio drivers LAN (BCM57760) - I dunno...  when I search it, nothing comes up...  
      "How did you get this far?"
      Update the BIOS, this is oh so very important (refer to the battery section of the "Spoiler" for the reson) PLEASE BACKUP YOUR BIOS FIRST! PLUG THE MACHINE INTO THE AC ADAPTER/CHARGER! DO NOT FORCE THE COMPUTER TO SHUTDOWN NOR REMOVE THE BATTERY NOR UNPLUG IT FROM THE AC ADAPTER/CHARGER WHILE IT IS UPDATING! I WILL NOT BE HELD LIABLE FOR BRICKED MACHINES! So it will boot off of the (Niresh) Mac OS X 10.8 with no changes to anything "Awesome" but you may still need at least a USB mouse "Aww" If you have the option to remove the display drivers/kexts otherwise it will not to boot or not display If you forgot this, breathe "You think that's air your breathing?"... anyways... during the bootloader, go into single user mode [ -s ] and follow the on screen instructions to allow for modifying the files. You will want to PREFERABLY create a folder where Mac OS cannot read them and move the IntelHDGraphics Kexts into it You are likely going to need an external USB keyboard as well now that it is installed Now install the described Kexts in the "Spoiler" associated with the hardware to get more functionality and loose the USB HICs  
      Any help pertaining to the Bluetooth, WIFI, LAN, bizarre brightness and wake after sleep backlit display issue would be wonderful... Thank you for your time and I hope that I helped anyone else out with some of their own issues pertaining to the Acer TravelMate 8472 TM8472 ZQ3 no nVidia with i5 laptop...
      (Attached are non-modified extracted DSDT DSL and AML files "with errors according to DSDTEditor" for reference of the machine with a Phoenix BIOS version of 1.28 (07/20/2011))
      dsdt.aml
      dsdt.dsl
       
       
    • By MaLd0n
      --Donations via PayPal--
      https://tinyurl.com/r2bvzm7
       
      --Original Topic--
      https://www.olarila.com/topic/6874-olarila-hackbook-lenovo-ideapad-s145-mojave-catalina-full-dsdt-patches/
       

       
      -Perfect HackBook, HDMI Audio/Video, Bluetooth, AirPlay, Sleep, Lid Sleep, Auto Sleep, Audio, etc!
      -Wifi card has been replaced with Dell DW1560!
      -I'm using a S145-15IWL Model with Intel Core i5 8265u / Intel UHD Graphics 620
      -Update bios/uefi to last version
       
      --Installation--
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Clover Folder--
      Just paste EFI folder inside EFI partition
      https://www.olarila.com/files/Clover.Folder/Lenovo IdeaPad S145.zip
      Notebooks with ELAN trackpad use it with my folder above
      IdeaPad S145 ELAN.zip
       
      Bluetooth Broadcom
      Bluetooth Broadcom.zip
       
      CPUFriend for i5-8265U
      CPUFriend i5-8265U.zip
       
      --Full DSDT Patches--
      -My DSDT
      DSDT Lenovo IdeaPad S145.zip
       
      This DSDT work on S145-14IWL, S145-15IWL, V14-IWL, V15-IWL models
      -Patches
      -FIX ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 11 ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PRWs -_DSMs -PNLF -BRIGHTNESS KEYS -I2C -NATIVE USB -ARPT -GFX0 -DTGP -kUSBCompanionIndex -io-device-location -FULL RENAMED DEVICES   --IGPU Patch--
      Video solution with HDMI Audio and Video
      <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,GfxYTile</key> <data> AQAAAA== </data> <key>AAPL,ig-platform-id</key> <data> CQClPg== </data> <key>device-id</key> <data> pT4AAA== </data> <key>enable-hdmi20</key> <data> AQAAAA== </data> <key>framebuffer-con0-alldata</key> <data> AAAIAAIAAACYAAAA </data> <key>framebuffer-con0-enable</key> <integer>1</integer> <key>framebuffer-con1-alldata</key> <data> AQEJAAAIAADHAQAA </data> <key>framebuffer-con1-enable</key> <integer>1</integer> <key>framebuffer-con2-alldata</key> <data> AgYKAAAEAADHAQAA </data> <key>framebuffer-con2-enable</key> <integer>1</integer> <key>framebuffer-fbmem</key> <data> AACQAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-stolenmem</key> <data> AAAwAQ== </data> <key>framebuffer-unifiedmem</key> <data> AAAAgA== </data> <key>hda-gfx</key> <string>onboard-1</string> <key>model</key> <string>Intel Corporation, Cannon Point-LP Iris Plus Graphics 655</string> </dict>   --Native USB Fix for Notebooks - No Injector/Kext Required--
      https://www.olarila.com/topic/6878-guide-native-usb-fix-for-notebooks-no-injectorkext-required/
      https://www.olarila.com/topic/6181-guide-native-usb-fix-for-desktops-no-injectorkext-required-skylake/
       
       
      -ScreenShots

































      -Links
       
       
      Clover https://github.com/CloverHackyColor/CloverBootloader
      AirportBrcmFixup.kext https://github.com/acidanthera/AirportBrcmFixup
      AppleALC.kext https://github.com/acidanthera/AppleALC
      Brcm Bluetooth https://github.com/acidanthera/BrcmPatchRAM
      Lilu.kext https://github.com/acidanthera/Lilu
      SystemProfilerMemoryFixup.kext https://github.com/Goldfish64/SystemProfilerMemoryFixup
      VirtualSMC.kext https://github.com/acidanthera/VirtualSMC
      VoodooI2C.kext https://github.com/alexandred/VoodooI2C
      VoodooPS2Controller.kext https://github.com/acidanthera/VoodooPS2
      WhateverGreen.kext https://github.com/acidanthera/WhateverGreen
      MaciASL - https://github.com/acidanthera/MaciASL
      acpica - https://github.com/acpica/acpica
      AptioMemoryFix.efi https://github.com/acidanthera/AptioFixPkg
      ApfsDriverLoader.efi https://github.com/acidanthera/AppleSupportPkg
      HFSPlus.efi https://github.com/JrCs/CloverGrowerPro/blob/master/Files/HFSPlus/X64/HFSPlus.efi?raw=true
      Hackintool https://github.com/headkaze/Hackintool
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
       
      We're all here to have fun and learn from each other!
×