Jump to content
fantomas1

[pre-release] macOS High Sierra 10.13.1

155 posts in this topic

Recommended Posts

Hmm .. on my wife's Mac Mini it has the 10.13.1 update but it doesn't see the supplemental update. Whereas on my PC I did the supplemental update but the 10.13.1 won't complete the install

Share this post


Link to post
Share on other sites
Advertisement

Update went really smooth on my Optiplex 790  ^_^

Will update my ProBook later today

 

post-1502423-0-48699900-1507571312_thumb.png

 

EDIT: Update on my ProBook went without a hitch too

 

post-1502423-0-54682600-1507575356_thumb.png

Share this post


Link to post
Share on other sites

Is anyone else seeing extra comments when OsxAptioFix2drv.efi is loading (before the line of +++++++)? I'm seeing additional lines containing some information about 'RestartData' and some numbers that I have never seen before.

Share this post


Link to post
Share on other sites

Is anyone else seeing extra comments when OsxAptioFix2drv.efi is loading (before the line of +++++++)? I'm seeing additional lines containing some information about 'RestartData' and some numbers that I have never seen before.

yes here too, but restart and shutdown is much faster since this ^_^

Share this post


Link to post
Share on other sites

yes here too, but restart and shutdown is much faster since this ^_^

 

Interesting, I hadn't really been paying much attention to that. I'll keep an eye on it and see how mine's going!

Share this post


Link to post
Share on other sites

Is anyone else seeing extra comments when OsxAptioFix2drv.efi is loading (before the line of +++++++)? I'm seeing additional lines containing some information about 'RestartData' and some numbers that I have never seen before.

Yes, same here with the new 10.13.1 beta 2 ?

Everything working fine, except Nvidia Driver...

post-1313347-0-67341800-1507743145_thumb.png

post-1313347-0-17575700-1507743174_thumb.png

post-1313347-0-35589900-1507743184_thumb.png

Share this post


Link to post
Share on other sites

Is anyone else seeing extra comments when OsxAptioFix2drv.efi is loading (before the line of +++++++)? I'm seeing additional lines containing some information about 'RestartData' and some numbers that I have never seen before.

http://www.insanelymac.com/forum/topic/284656-clover-general-discussion/?p=2513218

Share this post


Link to post
Share on other sites

Eager to get this update, I think there is a bug has been introduced with 10.13 on the windowserver, and that seems fixed in that 10.13.1.

 

Details can be found here:

https://discussions.apple.com/thread/8087967?start=0&tstart=0

https://forums.macrumors.com/threads/windowserver-taking-unholy-amount-of-ram-in-10-13.2073381/

So, 10.13 users which especially have 4k monitor (or using scaled resolutions) like me shouldn't be panicked when they see unholy ram usages on the windowserver process, slow opening-closing animations in launchpad, laggy safari sometimes etc.. :)

Share this post


Link to post
Share on other sites

It is working also here..

help me!. 

I am use MacBook Pro retina 2014 web driver WebDriver-378.10.10.10.15.120 not compatible 10.13.1 beta2 (17B35a). Why 117 work?. You have mod driver?.

post-1955424-0-53140600-1508234401_thumb.png

Share this post


Link to post
Share on other sites

/Library/Extensions/NVDAStartupWeb.kext/Contentshelp me!. 

I am use MacBook Pro retina 2014 web driver WebDriver-378.10.10.10.15.120 not compatible 10.13.1 beta2 (17B35a). Why 117 work?. You have mod driver?.

take a look here

/Library/Extensions/NVDAStartupWeb.kext/Contents/info.plist

you have to modify

 

<key>NVDARequiredOS</key>

<string>17A405</string>
 
with
<key>NVDARequiredOS</key>
<string>17B35a</string>
 
and rebuild permission and cache in a way working for you

before to install you have to disable some version check 

 

            #627            

 

Share this post


Link to post
Share on other sites

10.13.1 beta 3 released, is not an update, requires a complete redownload of the installer.

Maybe this will install on my desktop as .1 beta 1 and 2 always failed to install or booted to black screen even with Lilu and NvidiaGraphicsFixUp.

 

Sent from my SM-G930F using Tapatalk

Share this post


Link to post
Share on other sites

17B42a may has better security improvement, but yes.. as a full installer for Beta, wow..!!!   :angel: 

 

 

 

macappstores://itunes.apple.com/app/id1209167288

22555037_1793285884017293_24944631744845

 

 


Maybe this will install on my desktop as .1 beta 1 and 2 always failed to install or booted to black screen even with Lilu and NvidiaGraphicsFixUp.

You maybe interesting on this @SavageAUS?  :)

Share this post


Link to post
Share on other sites

Installation went smooth as usual on my ProBook.
 

post-1502423-0-90223600-1508282942_thumb.png

Share this post


Link to post
Share on other sites

Installation went smooth as usual on my ProBook.

 

attachicon.gifSchermafbeelding 2017-10-18 om 01.25.49.png

a fresh install @ricoc90? I'm still curious some ACPI Errors related about EC0, Asus laptop _ATK, etc.. on verbose logs with 10.13 that strange is, doesn't appear on 10.11 boot.

My bad is I have no good knowledge with ACPI, but perhaps.. I need to rebuild them from scratch with new iasl (though I'm not sure, on an old mach).

Share this post


Link to post
Share on other sites

a fresh install @ricoc90? I'm still curious some ACPI Errors related about EC0, Asus laptop _ATK, etc.. on verbose logs with 10.13 that strange is, doesn't appear on 10.11 boot.

My bad is I have no good knowledge with ACPI, but perhaps.. I need to rebuild them from scratch with new iasl (though I'm not sure, on an old mach).

Nope, update. I remember when I installed Sierra on this laptop, I had lots of ACPI errors related to EC0 too that I couldn't get rid off. Can't remember what they were exactly -- something among the lines of xx.EC0.xx.xx AE_NOT_FOUND. Later on I updated my BIOS and these errors disappeared. ACPI 6.0

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Slice
      I successfully installed macOS 10.11.6 and Windows 7 Pro SP1 in UEFI mode on the laptop.
      I know, there are detailed guides here and on osxlatitude.com but I was not agree with them and carefully check and test every step to tune my Mac.
       
      Hardware
      Intel® Core� i5-3320M CPU @ 2.60GHz, speedstep works with Clover default settings
      Chipset Intel 7 series, no patches needed
      Video: IntelHD4000 or NVS5200M switchable in BIOS, work in both cases
      LAN; Intel 82579LM, works with IntelMausiEthernet.kext v2.2.1
      Audio: IDT 92HD93BXX, works with VoodooHDA 2.9.0.
      SDHC reader O2Micro; works with native AppleSDHC.kext with Clover Arbitrary properties.
      USB3.0 works natively if not disabled in DSDT
      PS2 keyboard and touchpad works with VoodooPS2.
      WiFi: Dell Intel WiFi was replaced by Dell DW1520, Broadcom BCM943224HMS. DeviceID=4353
      LCD Screen 1366x768
      BIOS A12. Initially was A02. Then I flashed A23 and found it is quite bad. The screen is full of artefacts. Flash A12 and all is OK. Not tested other versions.
      For some reason BIOS can switched from Intel to Nvidia by itself so I have to do my solution working independent on this state.
       
      WiFi
      It is not working OOB although it has DeviceID known to Apple. The reason is WhiteList in the driver.
      I set MacModel as MacBookPro10,1 while the WiFi will work on MacBookAir. I make a patch in Clover.
      As well a patch for channels.
      I deleted a kext Brcm4331 because it has the same DeviceID. Let kext Brcm4360 to work alone.
       
      VideoCards
      In Bios we can set Optimus = Enable/Disable
      If Enable then we have two videocards Intel first and Nvidia second. In this case additional SSDT-3.aml will switch off Nvidia.
      If Disable then we have only Nvidia card. It will work if Board-ID taken from iMac13,2.
      But here there is contradiction with WiFi with required Board-ID from MacBookAir.
      So I take MacModel as MacBookPro10,1 which is most close by CPU IvyBridge.
      Set BoardID like iMac13,2 to make Nvidia working.
      Patch BoardID in Brcm4360 to make WiFi working.
      Now I have
      Inject->
      ->Intel=YES
      ->Nvidia=YES
      and SSDT-3.aml in ACPI\patched folder. This SSDT will switch off Nvidia if Intel card ON.
      For Intel graphics there is a patch against 8 apples at start.
       
      Brightness
      No special kexts.
      The brightness controlled by keys F1,F2 and slider in Control Panel in both case Intel or Nvidia. Details here  #72 
       
      DSDT and SSDT
      This is very long story and finally I have working sleep in both cases Intel or Nvidia.
       
      Sensors
      I use my HWSensors3 with FakeSMC 3.5.0.
      I got monitoring:
      CPU temperature
      GPU temperature
      GPU main frequency
      GPU shader frequency
      Battery state % full, time to charged or time to empty.
      Battery voltage dinamically.
      Battery amperage dynamically. I can see it changes on heavy games.
      HDD temperature.

       
      Audio
      I like VoodooHDA and have no problems with it.
      The sound is clear, loud, and switchable between internal speaker and headphone.
      Mic is working.
       
      Bluetooth
      Just tested with BTFirmwareUpdate.kext and it works in 10.11.6. I not needed it so switched off by wireless switch at right side.
      For 10.13.6 there is other kext BRCMInjector.
       
      Keyboard, Touchpad and Touchstick
      Post #14
       
      My config, ACPI files and kexts are in attachment.
      05.12.2017
      EFI.7z
       
      EDITED:
      Better DSDT in the post #6.
      Sleep working even when AC inserted.
       
      EDITED 06.12.2018
      Now I have HighSierra and this is my EFI folder
       

       
       
      Welcome to discussion!
      EFI-E6430.7z
      BRCMInjector.kext.zip
    • By h2onions
      Hey all,
       
      First Hackintosh that I think I have completed! I've been working on it on and off for a month, but just grinded it this past weekend. I just have a small QOL issue. I have posted in the r/Hackintosh reddit, but have not gotten a reply to this specific issue, but did for other issues I was having. I also posted at tonymacx86 and was getting replies for other issues I was having, but got banned because I said, "used VM, but didn't work" in my OP I think ...
       
      I followed a PC vanilla guide from r/Hackintosh that I found as I did not have an Apple system. One monitor connected to a GTX 1080, CPU: i7-8700, Coffee Lake. Motherboard is Alienware specific 0VDT73, with chipset Z370.
       
      The issue is every time High Sierra boots up and gets to the login screen, my keyboard and mouse do not work. I only have to reseat both and then they work the whole time until I restart. They are both plugged into USB2.0 ports. I do have Lilu, WhateverGreen, USBInjectAll, and VoodooPS2 installed in my /Library/Extensions folder using #####. Mouse and Keyboard work fine each time I boot to Clover (USB). Any ideas?
       
      Thank you!
      Working: NVIDIA using (One) DisplayPort, USB3.0 (rear), USB-C (rear), USB2.0 (rear), Audio, Ethernet
       
      EDIT: Did some more testing, and it looks like my Keyboard works fine after each reboot, the only issue is that my mouse has to continuously be reseated. Any ideas? Could it just be the mouse?It's an old Inland USB mouse: 337451
    • By Badruzeus
      "The all-new 2019 version of the graphic design software suite is compatible with not only Windows but also Mac, complete with support for Dark Mode on macOS Mojave and the Touch Bar on the latest MacBook Pro models, providing quick access to layout settings, text controls, and more." ~ macrumors
       
      More details: https://www.coreldraw.com/en/product/coreldraw/mac/
    • By Utku
      Hi guys, I have a big problem for VT -x. I tried any things for example: dark=0 or already bios option is virtualization is enable. I don't understand this problem.
       
      Thanks guys!! And yes I have intel Q8400 quad core cpu, motherboard is Asus asus p5g41c-m lx.
       


    • By plasticworld
      After a long run, I successfully upgraded High Sierra to mojave 10.14 on an intel 5 series chipset MotherBoard.
       
      MotherBoard: H55ms2
      RAM: 6GB
      GPU1: Saphire AMD RX 460
      GPU2: Nvidia 8400GS
      Storage: 500 GB HDD WD Green.
       
      The requirement:
      1) macOS pre mojave.
      2) macOS mojave installer from Apple store.
      3) Empty partition or USB to upgrade from.
      4) Un-mout all unused dmgs.
      5) GPT/GUID HDD.
       
      HOWOT:
      1) Prepare an empty partition or USB with at least 6 GB.
      2) Format the partition or USB with GUID partition table and HFS+ partition with a name BootablePartition.
      3) Go to /Application/Install macOS Mojave.app.
      4) Show Package Contents.
      5) Go to Contents/SharedSupport you will find BaseSystem.dmg.
      6) Double click on BaseSystem.dmg to mount.
      7) From Disk Utilty click on your partition or the USB that you prepared from number (2).
      8) Click on restore, and chose OS X Base System (BaseSystem.dmg image), then restore it to that partition or USB.
      9) After restoring rename the partition back to BootablePartition.
      9) Run this command:
      rm -rfv /Volumes/BootablePartition/System/Installation/Packages 10) Create a new folder instead of the broken link and name it Packages, run this command:
      mkdir -v /Volumes/BootablePartition/System/Installation/Packages 11) Go back to /Application/Install macOS Mojave.app and repeat number 2.
      12) Go to Contents/SharedSupport you will find InstallESD.dmg.
      13) Mount InstallESD.dmg.
      14) Run this command:
      cp -v /Volumes/InstallESD/Packages/OSInstall.mpkg /Volumes/BootablePartition/System/Installation/Packages/ 15) Download the latest clover from https://sourceforge.net/projects/cloverefiboot/
      16) Install clover on your USB BootablePartition or in a different USB to boot from it. delete all your CLOVER/kext/10.xx and keep others, make sure you don't have any extra kext rather than FakeSMC.kext in the other folder.
      in my case I used FakeSMC.kext and my lan kext RealtekRTL8111.kext.
      17) known Problems in my build: 
      If I updated directly from the apple store the installer in clover will boot with a cross circle sign.
      The FIX is to add this to Clover KextToPatch Thanks to @sunKi http://www.insanelymac.com/forum/topic/327488-macos-high-sierra-final-release-is-out-17a365/page-10?do=findComment&comment=2505086 this fix is still working for me in mojave.
      <key>KextsToPatch</key> <array> <dict> <key>Comment</key> <string>fix IO error ICH10 for 10.13, credit SunKi</string> <key>Disabled</key> <false/> <key>Find</key> <data> RYX2D5XCiciD4P5mhcl4D4TSdQs= </data> <key>Name</key> <string>AppleAHCIPort</string> <key>Replace</key> <data> iciD4P5mhckPmMFBCMyQkJCQdQs= </data> </dict> <dict> <key>Comment</key> <string>fix hotplug ICH10 for 10.13, credit SunKi</string> <key>Disabled</key> <false/> <key>Find</key> <data> icglQGACAD1AIAAAdQyB4b9///+Ji1EBAAA= </data> <key>Name</key> <string>AppleAHCIPort</string> <key>Replace</key> <data> kJCQkJCQkJCQkJCQkJCQkJCQkJCQkJCQkJA= </data> </dict> <dict> <key>Comment</key> <string>External icons patch</string> <key>Disabled</key> <false/> <key>Find</key> <data> RXh0ZXJuYWw= </data> <key>Name</key> <string>AppleAHCIPort</string> <key>Replace</key> <data> SW50ZXJuYWw= </data> </dict> </array> 18) make sure you have apfs.efi copy it from /Volumes/BootablePartition/usr/standalone/i386/apfs.efi to your EFI/CLOVER/drivers64/ and EFI/CLOVER/drivers64UEFI/.
      19) SMBIOS mac model that I use is iMac13,2.
      20) Go to /Application/Install macOS Mojave.app click on it and chose to install to your macOS Mojave partition.
      21) Reboot.
      22) From clover chose BootablePartion.
      23) If everything is okie BootablePartition will boot to install macOS mojave, wait wait wait till it finish it might take to 1 hour just wait it will reach the auto reboot soon .
      24) Boot to your old macOS Hight Sierra that will be your mojave partition now and enjoy.
       
      POST Install:
      1) audio: 
      a) Download Lilu.kext and AppleALC.kext or build them from source (which I did).
      b) place them in your /EFI/CLOVER/kext/others/
      c) add your audio layout in clover/Devices dict options in my case it's ALC888B which has the layout of 1:
      <key>Audio</key> <dict> <key>Inject</key> <string>1</string> </dict> d) I had to add beta args to clover/Boot dict, argument (-lilubeta -alcbeta):
       
      <key>Arguments</key> <string>-lilubeta -alcbeta</string> 2) Add number 14 KextsToPath array to your clover as well.

      Anything else is working for me I didn't need any extra clover kext so far, I tried whatevergreen.kext to fire up my rx 460 without the helper card but no success, So I am just sticking with booting from Nvidia as a first GPU from my motherboard configuration then swap the cables after choosing my macOS partion from clover.
       
      After upgrading my HFS+ High Sierra partition converted to APFS, no know problem so far.

      Happy build and more info about the partitioning method with a more detailed instructions in this post that I used to update my Sierra to High Sierra
       
      Special thanks to crazybirdy, sunKi and all of you out there that make this happens.
×