Jump to content
  1. franky-mac-user

    franky-mac-user

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Shogun
      Hi,

      I'm trying to get a clean install of High Sierra, but didn't manage to get too far... stuck on pre-installer with some errors.

      General flow that i've tried, following relevant guides and some success stories:
      1. Used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] to create bootable usb drive.
      2. Tried to use different options, UEFI boot mode, Legacy boot mode, with and without Clover configuration...

      In legacy mode it restarts after last error, while in uefi it hangs on kextd stall...

      Screens with error and clover folder/config attached.

      Motherboard: ASUS P8P67 EVO
      CPU: i7 2600K (not overlocked)
      Graphics: Sapphire Pulse Radeon RX 580 8GB
      Memory: Kingston 16 GB (2x8gb) 1333MHz
      Storage: SSD Samsung 860 EVO 500GB + Samsung 860 EVO 1TB

      Are this components compatible with High Sierra? From what i see on other threads, people got it working somehow.
      Should i use Legacy boot mode as of advice from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] or is possible to get it working with UEFI? Which one is better?

      How to get rid of "Unsupported CPU for reporter"?

      Any help would be highly appreciated. I'm desperate on wasting time to get it working. 

      Thanks!


      CLOVER.zip
      config.plist
    • By JackRabbitSlim
      Hi everyone,
      This is my first hackintosh. To be completely honest there's still a lot I'm trying to figure out... And considering I can't even get the installer to begin, seems like there's something I'm just not understanding. Any help would be greatly appreciated!!
       
      I've specced the machine based on a multiple successful builds I've seen in various vanilla forums.
      I've set the recommended BIOS, double-checked, but can't even get to an installer screen despite following a Vanilla guide from a popular hackintosh youtuber.
      (Not sure if her links can be mentioned, posted etc... Just playing it safe since this is my 1st post...)
       
       
       
      THE BUILD:

      Gigabyte Z390 Designare
      i9 9900k
      Sapphire Radeon RX580 Pulse - 8 GB
      G.Skill TridentZ 3200 - 64 GB
      Samsung EVO 840 (This is a scrap drive. Planned on using it to get the build running first, then cloning my MP 5,1 HS image after.)
      Other Stuff: Bluetooth, USB, iGPU, etc not important yet... Current goal is just to get the machine booting... I'll focus on WIFI/BT etc after...
       
      I've tried multiple SMBIOS profiles, (listed below). All of them prevent me from even booting the installer with the message below.
      At this point I'm wondering if the issue is HS related, or if there's a step that, although obvious to some, isn't obvious to me and overlooking somehow.
       
      Message returned when attempting to boot the installer. (Pic attached):
       
      This version of Mac OS X is not supported on this platform!
      Reason: Mac-AA95B1DDAB278B95
       
      I also get an error when I click update in Clover saying: Package is incompatible with this version of OS X and may fail to install
      ^ Seems like this indicates I've missed a step or done something wrong?
       
      Here's a list of the complete steps I've taken so far:
       
      Double-checked BIOS settings according to each build.
      Built a vanilla installer based on the video I mentioned above, steps listed below... (I've done this twice now, confirming I followed the steps in the guide.)
       
      Vanilla Installer Steps:
      Wiped and formatted my thumb drive with GUID Partition, HFS Extended (Journaled) Used terminal to create a bootable installer from a 10.13.6 installer I downloaded last june/july. Installed Clover Bootloader onto the Install macOS High Sierra partition of the thumb drive, and ticked: Clover for UEFI booting only, Install Clover into the ESP, VBox HFS-64, APFSDriverLoader-64, AptioMemoryFix-64 (leaving everything else unticked.)  
      Clover Configurator Steps:
      Mounted the Thumb Drive's EFI folder, opened C.C. and "downloaded" Lilu, WhateverGreen, & FakeSMC to the Other folder, & installed sensors. Deleted the default plist and manually created one using the Coffee Lake 'sample plist' from r/Vanilla Hackintosh Desktop Guide. Copy plist to the mounted EFI folder.  
      Open the plist with CC and did the following:
      Confirmed the following flags were set in CC's Boot section - Verbose (-v), dart=0, debug=0x100, & keepsyms=1 Tried 5 different SMBIOS profiles - iMac 18,1 ,  iMac 18,3 ,  iMac 19,1 , iMacPro 1,1 , and MacBookPro 15,1.  
      All result in the same Mac OS X is not supported on this platform message. The one suggestion I've found so far that seemed like it might work was to add the boot argument:
       -no_compat_check
       
      Same results, installer won't start and I get the same message...
       
      Seems like there must be something I've missed or I've done something wrong... I've spent the weekend searching, reading, etc, no luck so far...
       
      A few questions:
       
      I made the installer on my MacBook, not the build I'm trying to hack. Could this be related to the issue?            (I.e. - Does the vanilla method mean you need to create your SMBIOS profile on the actual machine you'll be Hackintoshing?)
       
      Is there a 9900k or Sapphire RX580 compatibility patch needed for 10.13 I haven't seen mentioned in the Mojave builds?  
      Does the Clover update message package is incompatible with this version of OS X and may fail to install indicate something isn't right with my installer setup?  
       
      Please excuse me if anything above isn't clear, I'm brand new to all this and frankly I'm having a hard time wrapping my head around a lot of it!
       

    • By fantomas1
      Hi InsanelyMacaholics   

      Use this thread to link / talk about of the future Nvidia Web Driver updates for macOS Sierra.
       
      10.12.6
      Nvidia Web Driver - 378.05.05.25f16 --> build 16G2016 (thanks to Cyberdevs) New!
      Nvidia Web Driver - 378.05.05.25f15 --> build 16G1918 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f14 --> build 16G1917 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f13 --> build 16G1815 (thanks to flowrider)
      Nvidia Web Driver - 378.05.05.25f12 --> build 16G1710 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f11 --> build 16G1618 (thanks to Frank Nitty)
      Nvidia Web Driver - 378.05.05.25f10 --> build 16G1510 (thanks to BreBo) 
      Nvidia Web Driver - 378.05.05.25f09 --> build 16G1408 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f08 --> build 16G1314 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f07 --> build 16G1314 (thanks to haring)
      Nvidia Web Driver - 378.05.05.25f06 --> build 16G1212 (thanks to WeBeRiO)
      Nvidia Web Driver - 378.05.05.25f04 --> build 16G1114 (thanks to lukazm)
      Nvidia Web Driver - 378.05.05.25f03 --> build 16G1036 (thanks to Gradou)
      Nvidia Web Driver - 378.05.05.25f01 --> build 16G29 (thanks to Badruzeus)
       
       
      10.12.5
      Nvidia Web Driver - 378.05.05.15f01 --> build 16F73 (see this post)
       
       
      10.12.4
      Nvidia Web Driver - 378.05.05.05f02 --> build 16E195(thanks to crachmaster4999)
      Nvidia Web Driver - 378.05.05.05f01 --> build 16E195 (thanks to Moviemakergr)  Pascal support!!!
      Nvidia Web Driver - 367.15.10.45f01 --> build 16E195 (thanks to Lanc)
       
       
      10.12.3

      Nvidia Web Driver - 367.15.10.35f01 --> build 16D32 (thanks to shatterhenner)
       
       
      10.12.2
      Nvidia Web Driver - 367.15.10.25f02 --> build 16C68 (see this post)
      Nvidia Web Driver - 367.15.10.25f01 --> build 16C67 (see this post)
      Nvidia Web Driver - 367.15.10.25b06 --> build 16C60b/16C63a (see this post)
       
       
      10.12.1
      Nvidia Web Driver - 367.15.10.15f03 --> build 16B2657/16B2659 (thanks to Moviemakergr).
      Nvidia Web Driver - 367.15.10.15f01 --> build 16B2555 (thanks to Moviemakergr)
       
       
      10.12.0
      Nvidia Web Driver - 367.15.10.05f01 --> build 16A323 (thanks to phi777)
       
       
      GM
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A323 (same driver since DP4/PB3)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A322 (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A320 (see this post)
       
       
      DP/PB
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A313a (DP8 & PB7) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A304a (DP7 & PB6) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A294a (DP6 & PB5) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A286a (DP5 & PB4) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A270f (DP4 & PB3) (thanks to TheRacerMaster)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A254g (DP3 & PB2) (see this post)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A238m (PB1) (thanks to Faun) 
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A239j (DP2) (thanks to Faun)
      Nvidia Web Driver - 367.05.10.05b03 --> build 16A201w (DP1) (thanks to Xmedik)
       
    • By fantomas1
      Hi InsanelyMacaliens    
       
      Use this thread to link / talk about of the future Nvidia Web Driver updates for macOS High Sierra.
       
      10.13.6
      Nvidia Web Driver - 387.10.10.10.40.128 --> build 17G7024 (thanks to flowrider) New!
      Nvidia Web Driver - 387.10.10.10.40.127 --> build 17G6030 (thanks to Extreme™) 
      Nvidia Web Driver - 387.10.10.10.40.124 --> build 17G6030 (thanks to flowrider) 
      Nvidia Web Driver - 387.10.10.10.40.123 --> build 17G6029 (thanks to Badruzeus) 
      Nvidia Web Driver - 387.10.10.10.40.122 --> build 17G5019 (thanks to TimeLord04) 
      Nvidia Web Driver - 387.10.10.10.40.118 --> build 17G5019 (thanks to ReddestDream)
      Nvidia Web Driver - 387.10.10.10.40.113 --> build 17G4015 (thanks to flowrider)
      Nvidia Web Driver - 387.10.10.10.40.108 --> build 17G3025 (check here)
      Nvidia Web Driver - 387.10.10.15.15.108 --> build 17G2307 (thanks to marcozardi)
      Nvidia Web Driver - 387.10.10.10.40.105 --> build 17G65 (thanks to sl0wtarget)
       
      10.13.5
      Nvidia Web Driver - 387.10.10.10.35.106 --> build 17F77 (check here)
       
      10.13.4
      Nvidia Web Driver - 387.10.10.10.30.107 --> build 17E202 (check here)
      Nvidia Web Driver - 387.10.10.10.30.106 --> build 17E199 (thanks to BreBo)
      Nvidia Web Driver - 387.10.10.10.30.103 --> build 17E199 (thanks to ricoc90)
       
       
      10.13.3
      Nvidia Web Driver - 387.10.10.10.25.161 --> build 17D102 (thanks to Cyberdevs)
      Nvidia Web Driver - 387.10.10.10.25.160 --> build 17D2102 (thanks to Cyberdevs)
      Nvidia Web Driver - 387.10.10.10.25.159 --> build 17D2012 (thanks to cyberdevs)
      Nvidia Web Driver - 387.10.10.10.25.158 --> build 17D102 (thanks to cyberdevs)
      Nvidia Web Driver - 387.10.10.10.25.157 --> build 17D2047 (thanks to cyberdevs)
      Nvidia Web Driver - 387.10.10.10.25.156 --> build 17D47 (thanks to darthsian) 
       
       
      10.13.2
      Nvidia Web Driver - 378.10.10.10.25.106 --> build 17C2205 (thanks to KGP-X99)
      Nvidia Web Driver - 378.10.10.10.25.105 --> build 17C2120 (see this post)
      Nvidia Web Driver - 378.10.10.10.25.104 --> build 17C205 (thanks to ReddestDream)
      Nvidia Web Driver - 378.10.10.10.25.103 --> build 17C89 (thanks to Il Francy MacPc) 
      Nvidia Web Driver - 378.10.10.10.25.102 --> build 17C88 (thanks to piiggggg)
       
       
      10.13.1
      Nvidia Web Driver - 378.10.10.10.20.109 --> build 17B1003 (see this post)
      Nvidia Web Driver - 378.10.10.10.20.108 --> build 17B1002 (thanks to BreBo)
      Nvidia Web Driver -378.10.10.10.20.107 --> build 17B48 (thanks to piiggggg) 
       
       
      10.13.0
      Nvidia Web Driver - 378.10.10.10.15.121 --> build 17A405 (thanks to Asgorath)
      Nvidia Web Driver - 378.10.10.10.15.120 --> build 17A405 (thanks to phi777)
      Nvidia Web Driver - 378.10.10.10.15.117 --> build 17A405 (thanks to phi777)
      Nvidia Web Driver - 378.10.10.10.15.114 --> build 17A365 (thanks to Asgorath).
    • By fusion71au
      Making a High Sierra USB Installer Entirely From Scratch in Windows
      This is a proof of concept tutorial, to show it's possible to create a vanilla High Sierra installer, entirely from scratch, in Windows (even without App Store downloaded "Install macOS High Sierra.app" from a real Mac ).  @PikeRAlpha's link to Apple's Software Catalog provides us with all the URLs necessary to download the needed files directly from Apple instead of some dubious source from the internet...
       

      Pre-Requisites
      8GB or larger USB drive Boot Disk Utility v2.1.2017rev021b from @CVAD TransMac (free 15 day trial) Paragon Hard Disk Manager Free Download Installer Files Directly from Apple
      1)  Browse Apple's Regular Software Catalog and find the URLs to download the following 6 installer files...
      BaseSystem.dmg BaseSystem.chunklist InstallInfo.plist InstallESDDmg.pkg AppleDiagnostics.dmg AppleDiagnostics.chunklist (Hint - search page for "InstallESD" to find its URL and others nearby)

      to a folder named "SharedSupport" on your Windows NTFS drive.  A browser download manager (eg Chrono for Chrome, dTA for FireFox) is handy since InstallESD is >4GB ---> allows you to pause/resume interrupted download...

      2)  Rename InstallESDDmg.pkg to InstallESD.dmg
      3)  Edit InstallInfo.plist with WordPad/text editor to remove the chunklistURL and chunklistid keys for InstallESD, and renaming it from InstallESDDmg.pkg to InstallESD.dmg (example of edited file attached to this post)...
      Note:  You can verify the SHA1 checksum of your InstallESD.dmg and BaseSystem.dmg with the correct ones at this website.
      Boot Disk Utility to format the Installer USB and Restore OS X Base System HFS partition
      1.  Format USB with BDU & latest Clover ---> creates boot files in CLOVER partition + second FAT partition
      2.  Extract 4.hfs from \SharedSupport\BaseSystem.dmg with BDU --> save to it's local folder
      3.  Restore 4.hfs to USB second partition with BDU --->  2nd partition becomes bootable "OS X Base System"
      Paragon Hard Disk Manager to extend HFS Partition to its Full Extent
      Open Paragon Partition Manager Free and resize the second partition of the USB drive to the full size allowed.  Don't forget to apply the changes at the end...
      Transmac to Copy "SharedSupport" folder to OS X Base System
      1.  Open the TransMac program and navigate to the HFS+ Volume/Install macOS High Sierra.app/Contents folder.  Right click anywhere in the empty space on the RHS pane and select "Copy Here"...
      2.  In the next stage, select the "SharedSupport" folder we created above as the "Files and Folders to be copied to the Mac Volume"...
      Clover Settings
      Clover configuration is required now.  The default config.plist (in the Clover FAT32 partition of the USB) maybe sufficient to boot your machine if you’re lucky.  If not, look at the Clover Wiki, Clover Instructions and Clover Configuration Thread for pointers and edit /EFI/Clover/config.plist accordingly with Wordpad or Notepad.
      The location of the important configuration files for Clover are summarized below
      config.plist--->EFI/CLOVER folder DSDT.aml with or without SSDT.aml--->EFI/CLOVER/ACPI/patched (don't need one if your DSDT is auto patched by Clover in config.plist) Kexts eg FakeSMC, NullCPUPowerManagement --->EFI/CLOVER/kexts/<osx version> or /Other. NB BootDiskUtility by default already has FakeSMC.kext installed here.  You may need to add VoodooPS2Controller for your laptop keyboard/trackpad to work. If UEFI booting, you will most likely need one of the OsxAptioFixDrv-64 drivers copied from /EFI/CLOVER/drivers-off/drivers64UEFI to /EFI/CLOVER/drivers64UEFI. If you want to use the installer to run High Sierra in Windows on VMware, you can follow my guide to set up the Virtual Machine and replace Clover's default config with EFI_Clover for VMware (which is compatible to run in VMware).  In the screenshots below, I have attached the USB Installer (in this case PhysicalDrive7) to my macOS Virtual Machine.  Reboot the system to the USB installer to install High Sierra ...
      What happens if we don't have access to TransMac or Paragon Hard Disk Manager?
      Not a problem, as long as we get "OS X Base System" bootable, we can launch terminal from the Utilities Menu to copy the SharedSupport folder over to the Installer app.  In essence, we will build the full installer app = 5GB+ on the target HD eg "Macintosh HD", by copying both the "small" installer app = 15MB (on "OS X Base System") and the SharedSupport folder from the NTFS volume (mounted in this example on /Volumes/DATA)...
      -bash-3.2# cd / -bash-3.2# cp -R Install\ macOS\ High\ Sierra.app /Volumes/Macintosh\ HD/ -bash-3.2# cp -R /Volumes/DATA/SharedSupport /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app/Contents/  
      ...then start installation with the startosinstall utility...
      -bash-3.2# /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app/Contents/Resources/startosinstall --volume /Volumes/Macintosh\ HD --converttoapfs NO --applicationpath /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app  
      The above steps can be automated with the attached "startosinstall.command" script, which will assemble "Install macOS High Sierra.app" on "Macintosh HD" and launch the startosinstall utility targeting the "Macintosh HD" volume.  Copy/download to "Macintosh HD", then run in terminal (after attaching DATA USB with /Shared Support folder)...
      cd "/Volumes/Macintosh HD" chmod +x startosinstall.command ./startosinstall.command Updated Download Links for macOS Mojave 10.14.5_18F132
      Browse Apple's Regular Software Catalog and find the URLs to download the following 6 installer files...
      BaseSystem.dmg BaseSystem.chunklist InstallInfo.plist InstallESDDmg.pkg AppleDiagnostics.dmg AppleDiagnostics.chunklist  
      Note: In Mojave, Apple has removed the --converttoapfs NO and --applicationpath arguments from the startosinstall utility....
       
      eg to use startosinstall for the above section "What happens if we don't have access to TransMac or Paragon Hard Disk Manager?", the syntax is now
      -bash-3.2# /Volumes/Macintosh\ HD/Install\ macOS\ Mojave.app/Contents/Resources/startosinstall --volume /Volumes/Macintosh\ HD  
      This basically means that for Mojave, the default installation will always convert the target volume to the apfs file system.
       
       
      startosinstall.command.zip
      InstallInfo.plist_edited_10.13.6.zip
      InstallInfo.plist_edited_10.14.5.zip
       
       
×