Jump to content
Allan

macOS High Sierra - Final Release is out! (17A365)

448 posts in this topic

Recommended Posts

Advertisement

New createinstallmedia terminal command?

 

There is no new createinstallmedia terminal command - it's always the same and works well.

Usage: createinstallmedia --volume <path to volume to convert>

Arguments
--volume, A path to a volume that can be unmounted and erased to create the install media.
--applicationpath, A path to copy of the OS installer application to create the bootable media from.
--nointeraction, Erase the disk pointed to by volume without prompting for confirmation.

Example: createinstallmedia --volume /Volumes/Untitled

This tool must be run as root.

Result:

Last login: Tue Sep 26 10:43:58 on ttys000
fantomass-iMac:~ fantomas$ sudo /Applications/Install\ macOS\ High\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ macOS\ High\ Sierra.app 
Password:
Ready to start.
To continue we need to erase the volume at /Volumes/USB.
If you wish to continue type (Y) then press return: y
Erasing Disk: 0%... 10%... 20%... 30%...100%...
Copying installer files to disk...
Copy complete.
Making disk bootable...
Copying boot files...
Copy complete.
Done.
fantomass-iMac:~ fantomas$

Share this post


Link to post
Share on other sites

 

Hi Guys,

 

Successfully updated both my desktop systems and my Dell XPS M1530 notebook to High Sierra Release - 10.13_17A365 :).

 

1.  GA-P55aUD3 with legacy BIOS/Intel i5-750/ATI HD5770/HFS+ HDD

 

2.  Skylake NUC6i5SYH with UEFI/Intel i5-6260U/Iris 540/APFS SSD

 

3.  Dell XPS M1530 legacy BIOS/Intel T9300/Geforce 8600M GT/HFS+ Ext HDD

 

 

Installation Notes
  • "Install macOS High Sierra.app" v 13.0.64 run directly from Applications folder for upgrade install of existing GM_17A362a
  • Updated to latest Clover r4220, Clover injected default values for FF/FFM/PF and BIOS ver/date/Board-ID data (iMac11,3, iMac17,1, MBP7,1) --> avoid error while "verifying firmware"
  • Latest apfs.efi driver in /EFI/CLOVER/drivers64 or /EFI/CLOVER/drivers64UEFI (only needed if APFS target volume)
  • Removed NVRAM.plist files from all EFI partitions (incl USB drives), ran sudo NVRAM -c command in terminal to reset NVRAM prior to update
  • On my Skylake NUC, I don't need or use EmuVariableUefi-64 ---> avoid OSInstall.mpkg damaged/missing error
  • If upgrading existing OS X on HDD, HFS+ is preserved (on SSD HFS+ will be converted automatically to APFS)
  • Certain SATA controllers will still have issues with AppleAHCIPort v329 (eg ICH10, 5 series, 7 series, ASMedia 1061) ---> Disks may fail to initialize, not readable or hot plug may fail.  AppleAHCIPort.kext v328 with version bundle 999.1.1 survives upgrade if installed in /L/E, and is loaded in preference to v329
  • A windows disk present on the machine during installation is OK.

 

Here, with the kexts on 10.13, the installer did not go up, only in Other.

 

EFI/Clover/kexts/Other

 

 

 

Share this post


Link to post
Share on other sites

 i have used same config.plist and kext/other that im runing with beta version to install the final version but stuck at

 

sound assertion in applehdadriver at line

 

any idea ?

Share this post


Link to post
Share on other sites

Guys, if you still are on a beta or GM build, do not bother with creating a new usb installer with createinstallmedia, use startosinstall instead. :yes:

 

It will start HSierra install and will save you time and stress. :P;)

 

 

what is the method to install in HFS? :rolleyes:

 

 

my HDD is in HFS! ;)

Share this post


Link to post
Share on other sites

Guys, if you still are on a beta or GM build, do not bother with creating a new usb installer with createinstallmedia, use startosinstall instead. :yes:

 

It will start HSierra install and will save you time and stress. ;)

 

 

 

 

my HDD is in HFS! ;)

I just ran the .app I downloaded from app store. What is startosinstall?

 

Sent from my SM-G930F using Tapatalk

Share this post


Link to post
Share on other sites

You'll find it in the same folder as createinstallmedia 

 

/Applications/Install macOS Sierra.app/Contents/Resources

 

For me the installer has only 20 MB, why ? 

Share this post


Link to post
Share on other sites

I found something interesting on my ICH10 hack with 10.13:

I have 2 HDD WesternDigital that not working under 10.13 with AppleAHCIPort v329

Also I have 1 HDD Hitachi and 1 SSD Kingston that are working fine under 10.13 with v329

I tried changing sata ports but the result is the same: WD HDDs not working and Hitachi HDD and Kingston SSD are working fine, I can install HS on them without any trick(changing AppleAHCIPort or anything).

Share this post


Link to post
Share on other sites

I just ran the .app I downloaded from app store. What is startosinstall?

 

Sent from my SM-G930F using Tapatalk

You can find explanation on previous thread: http://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page-191 But I don't try it because I don't know how to migrate apps and data with this method

Share this post


Link to post
Share on other sites

Anyone has tried with an amd r7 vga?

 

I've got the black screen after apple logo problem, but the strange thing is that lilu + whatevergreen didn't fix it. I'm also using Pike's path for GraphicPolicy.kext

 

I'm using the r7 260x with fakeid injection connected with displayport. Even if screen si black I can hear sound routed from the vga.

Also if I boot with the intel igpu I can notice that the 260x is detected and (as ioRegistyExploer reports) everything is as in El Capitan.

 

I couln't understand why it isn't working.

 

 

Inviato dal mio iPhone utilizzando Tapatalk

Share this post


Link to post
Share on other sites

how did you install it in HFS?

 

 

As I said, I previously had GM installed on my HFS+ formatted HDD. Then I downloaded HS final release. When I wanted to create my new usb installer with createinstallmedia, I was curious about that startosinstall file that I found in the same folder (/Applications/Install macOS Sierra.app/Contents/Resources). I just clicked on it and Terminal was opened. Asked me to agree the licence (put A for agree) and my PC rebooted. After rebooting, it directly came at the second stage, when the install started (it remains 45minutes...).   :)

 

EDIT:

 

As I launched that file from my primary partition (to be installed on it), the installation processing worked well (finally, it more updated my GM build, instead of made a proper install), my apps and files were all safe.   :yes:

 

EDIT 2:

 

The funny thing in this story is that I have no longer HS app in my Application folder.   :P . I guess it served as a temporary file and once installed ,the app has been deleted.

Edited by fantomas1

Share this post


Link to post
Share on other sites

All fine except sleep (first hack in signature).

0YM1ZkS.png


LuCys-Mac-Pro:~ lucy$ diskutil ap convert disk3s3
Started APFS operation on disk3s3 High Sierra
Converting HFS Volume to an APFS Container which will export one APFS Volume
The target is the Journaled HFS+ volume "High Sierra" backed by the GPT partition disk3s3
Exiting conversion operations with error code -69546
Error: -69546: Conversion to APFS of a macOS system volume is only allowed in the OS Installer Environment

Any suggestions?

Share this post


Link to post
Share on other sites

All fine except sleep (first hack in signature).

0YM1ZkS.png

LuCys-Mac-Pro:~ lucy$ diskutil ap convert disk3s3
Started APFS operation on disk3s3 High Sierra
Converting HFS Volume to an APFS Container which will export one APFS Volume
The target is the Journaled HFS+ volume "High Sierra" backed by the GPT partition disk3s3
Exiting conversion operations with error code -69546
Error: -69546: Conversion to APFS of a macOS system volume is only allowed in the OS Installer Environment

Any suggestions?

Boot with macOS High Sierra installer and run the command in terminal 

Share this post


Link to post
Share on other sites

Boot with macOS High Sierra installer and run the command in terminal 

Thanks, but I can't do this because my drive isn't recognized in installer because of AppleAHCIPort, I explained it at post #64

Share this post


Link to post
Share on other sites

Thanks, but I can't do this because my drive isn't recognized in installer because of AppleAHCIPort, I explained it at post #64

Which of your hard disks is disk3s3? I assume that's the one that you are trying to convert to APFS. Right?

Share this post


Link to post
Share on other sites

Which of your hard disks is disk3s3? I assume that's the one that you are trying to convert to APFS. Right?

Yes, it's an WD 320GB with High Sierra installed.

Share this post


Link to post
Share on other sites

All good here, when returning from sleep USB devices are ejected is there any way/patch to fix it?

installing CUDA 9RC davinci resolve not recognize CUDA...strange

post-474300-0-75240100-1506433958_thumb.png

Share this post


Link to post
Share on other sites

Yes, it's an WD 320GB with High Sierra installed.

Sorry I'm confused, the installer doesn't recognize that HDD but in an installed version it's detected?

Share this post


Link to post
Share on other sites

Sorry I'm confused, the installer doesn't recognize that HDD but in an installed version it's detected?

I installed it on an recognized hdd and then restore the unrecognized hdd from high sierra installed with disk utility then replaced AppleAHCIPort and it's working.

Sorry, it's a little complicated, I hope you understand now :D

 

Sent from my HTC One M9 using Tapatalk

Share this post


Link to post
Share on other sites

I installed it on an recognized hdd and then restore the unrecognized hdd from high sierra installed with disk utility then replaced AppleAHCIPort and it's working.

Sorry, it's a little complicated, I hope you understand now :D

 

Sent from my HTC One M9 using Tapatalk

Ok, I see, in that case you might be able to boot from the recovery partition on your WD HDD and use the terminal in the recovery mode. But since you didn't install the macOS directly on that hard disk you might be missing the recovery partition.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By NikTheNoob
      Hi,
       
      I'm rather new to Hackintosh and trying my first build with OpenCore on AMD, but I run into issues causing OpenCore to crash before even loading the macOS installer. As I'm not sure which one is causing the crash, I'm trying to resolve all of them and one of the error messages has to do with WhateverGreen, which I was able to see in this slow-mo loading video. Basically I'm getting an error that I'm running an unsupported processor, even though I think I was following this guide by the step.
      What could be causing this and what do I need to do to resolve it?
       
      CPU: AMD Ryzen 2700X
      MB: Gigabyte Aorus X470 Ultra Gaming
      Memory: 4x8 GB HyperX Predator, 3000 MHz Cl15
      Storage: Samsung Evo 970 Nvme 512 GB, Crucial MX500 500GB SATA
      GPU: MSI Radeon RX580 GamingX 8GB
    • By MaLd0n
      --Donations via PayPal--
      https://tinyurl.com/r2bvzm7
       
      --Original Topic--
      https://www.olarila.com/topic/6874-olarila-hackbook-lenovo-ideapad-s145-mojave-catalina-full-dsdt-patches/
       

       
      -Perfect HackBook, HDMI Audio/Video, Bluetooth, AirPlay, Sleep, Lid Sleep, Auto Sleep, Audio, etc!
      -Wifi card has been replaced with Dell DW1560!
      -I'm using a S145-15IWL Model with Intel Core i5 8265u / Intel UHD Graphics 620
      -Update bios/uefi to last version
       
      --Installation--
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Clover Folder--
      Just paste EFI folder inside EFI partition
      https://www.olarila.com/files/Clover.Folder/Lenovo IdeaPad S145.zip
      Notebooks with ELAN trackpad use it with my folder above
      IdeaPad S145 ELAN.zip
       
      Bluetooth Broadcom
      Bluetooth Broadcom.zip
       
      CPUFriend for i5-8265U
      CPUFriend i5-8265U.zip
       
      --Full DSDT Patches--
      -My DSDT
      DSDT Lenovo IdeaPad S145.zip
       
      This DSDT work on S145-14IWL, S145-15IWL, V14-IWL, V15-IWL models
      -Patches
      -FIX ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 11 ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PRWs -_DSMs -PNLF -BRIGHTNESS KEYS -I2C -NATIVE USB -ARPT -GFX0 -DTGP -kUSBCompanionIndex -io-device-location -FULL RENAMED DEVICES   --IGPU Patch--
      Video solution with HDMI Audio and Video
      <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,GfxYTile</key> <data> AQAAAA== </data> <key>AAPL,ig-platform-id</key> <data> CQClPg== </data> <key>device-id</key> <data> pT4AAA== </data> <key>enable-hdmi20</key> <data> AQAAAA== </data> <key>framebuffer-con0-alldata</key> <data> AAAIAAIAAACYAAAA </data> <key>framebuffer-con0-enable</key> <integer>1</integer> <key>framebuffer-con1-alldata</key> <data> AQEJAAAIAADHAQAA </data> <key>framebuffer-con1-enable</key> <integer>1</integer> <key>framebuffer-con2-alldata</key> <data> AgYKAAAEAADHAQAA </data> <key>framebuffer-con2-enable</key> <integer>1</integer> <key>framebuffer-fbmem</key> <data> AACQAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-stolenmem</key> <data> AAAwAQ== </data> <key>framebuffer-unifiedmem</key> <data> AAAAgA== </data> <key>hda-gfx</key> <string>onboard-1</string> <key>model</key> <string>Intel Corporation, Cannon Point-LP Iris Plus Graphics 655</string> </dict>   --Native USB Fix for Notebooks - No Injector/Kext Required--
      https://www.olarila.com/topic/6878-guide-native-usb-fix-for-notebooks-no-injectorkext-required/
      https://www.olarila.com/topic/6181-guide-native-usb-fix-for-desktops-no-injectorkext-required-skylake/
       
       
      -ScreenShots

































      -Links
       
       
      Clover https://github.com/CloverHackyColor/CloverBootloader
      AirportBrcmFixup.kext https://github.com/acidanthera/AirportBrcmFixup
      AppleALC.kext https://github.com/acidanthera/AppleALC
      Brcm Bluetooth https://github.com/acidanthera/BrcmPatchRAM
      Lilu.kext https://github.com/acidanthera/Lilu
      SystemProfilerMemoryFixup.kext https://github.com/Goldfish64/SystemProfilerMemoryFixup
      VirtualSMC.kext https://github.com/acidanthera/VirtualSMC
      VoodooI2C.kext https://github.com/alexandred/VoodooI2C
      VoodooPS2Controller.kext https://github.com/acidanthera/VoodooPS2
      WhateverGreen.kext https://github.com/acidanthera/WhateverGreen
      MaciASL - https://github.com/acidanthera/MaciASL
      acpica - https://github.com/acpica/acpica
      AptioMemoryFix.efi https://github.com/acidanthera/AptioFixPkg
      ApfsDriverLoader.efi https://github.com/acidanthera/AppleSupportPkg
      HFSPlus.efi https://github.com/JrCs/CloverGrowerPro/blob/master/Files/HFSPlus/X64/HFSPlus.efi?raw=true
      Hackintool https://github.com/headkaze/Hackintool
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
       
      We're all here to have fun and learn from each other!
    • By fantomas
      macOS Catalina 10.15.4 beta (19E224g)
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://www.olarila.com/topic/5165-olarila-app-images-and-folders/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
        First... If you need DSDT edits... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation --Create a bootable copy of El Capitan /  Sierra / High Sierra / Mojave https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install EL Capitan / Sierra / High Sierra and boot into system!     Post Installation   --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/     --Reboot and activate video!   Bingo! Now you need a fine tune! DSDT Time!   My DSDT GA P35-DS3   DSDT.MaLd0n.zip     Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -LPC -HDEF -RTC -EHCI -UHCI -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF --Native Power Management
       
      Use Clover, check Generate P and C States
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --AUDIO
       
      Device HDEF + AppleAlc + Lilu
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
×