Jump to content
Allan

macOS High Sierra - Final Release is out! (17A365)

448 posts in this topic

Recommended Posts

For CPU's frequency you need to have the SSDTs, find Pike's SSDT generator and run it, it will create SSDT's required for power management.

i only check hwp in clover with macpro6.1..all works fine.....i have not  used pike's ssdt for a long time

Share this post


Link to post
Share on other sites
Advertisement

Fix for ICH10 with High Sierra. Now with hot-plug support.

 

For this we need two binary patches.

First patch fix I/O error for ICH10:

4585F60F 95C289C8 83E0FE66 85C9780F 84D2750B -> 89C883E0 FE6685C9 0F98C141 08CC9090 9090750B 

With second patch will work hot-plug:

89C82540 6002003D 40200000 750C81E1 BF7FFFFF 898B5101 0000 -> 90909090 90909090 90909090 90909090 90909090 90909090 9090

With these two patches I got ICH10 with hot-plug.

attachicon.gifСнимок экрана 2017-09-30 в 14.40.42.png

 

Good luck ;)

 

Works with my old P5Q DLX (ICH10R), but i noticed that my HDD doesn't sleep with this fix.

I've got a SSD for OS and a HDD for medias on my hack.

I used to use the ESB2 DSDT fake ID and it does the same as this patch (works but no HDD sleep).

The only way to have HDD sleep stills AppleAHCIPort from DP for me.

 

Did you see this too, guys ?

Anyway, thank you for your work.

Share this post


Link to post
Share on other sites

 

Just suddenly happen if playing music or keep itunes without play music.
since 10.13 dp1 ~ now, this issue happen. i tried all to fix itunes crash. but can't fix. in sierra, there was no problem.
strangely, sandybridge laptop is no problem. only happen skylake laptop.
 
EDIT1.
10.13.2 beta1's apfs seems to be help for itunes crash. not sure. need to test many times

 

try this. it seems to help itunes crash.

 

my step

1. put apfs.efi in drivers64UEFI

2. reboot

3. macos start diskutility

4. automately reboot

5. booted osx

 

and tested it. not sure. better than before now.

 

Same here on my Kaby Lake laptop. How can it be related to apfs.efi when I'm using HFS+J?

Share this post


Link to post
Share on other sites

Same here on my Sky Lake laptop. How can it be related to apfs.efi when I'm using HFS+J?

Is this file exist on ur hSierra installation?

/System/Library/LaunchAgents/com.apple.MDCrashReportd.plist

Share this post


Link to post
Share on other sites

I think bcoz 10.13.2 Beta 2 and Dev Beta 2 have a same build number, the reason why.. only Apple devs could give the answer  ^_^

https://developer.apple.com/news/releases/

It's been happening since the first public beta of 10.13. It can be quite clear if you look at the software update history. In my hack, it's showing "Developer beta" although it is set to receive only the public betas. For example, today I've updated the OS to public beta 2 (which is released two days ago), but look at the history, it says "macOS High Sierra 10.13.2 Developer Beta". Similarly, ALL of the entries in the history contain "Developer beta" NOT "Public beta" which I have never seen in the previous OSes.

Muntashirs-MBP:~ muntashir$ softwareupdate --history | grep "Dev"
macOS High Sierra 10.13.2 Developer Beta           2          11/09/2017, 09:49:13  
macOS High Sierra Developer Beta                   1          11/03/2017, 07:54:58  
macOS High Sierra Developer Beta                   1          11/03/2017, 03:08:38  
macOS High Sierra Developer Beta                   9          11/02/2017, 07:14:49  
macOS High Sierra Developer Beta                   7          08/22/2017, 22:57:37  
macOS High Sierra Developer Beta                   6          08/17/2017, 07:58:35  
macOS High Sierra Developer Beta                   5          08/10/2017, 17:52:36  
macOS High Sierra Developer Beta                   4          07/27/2017, 06:22:08  
macOS High Sierra Developer Beta                   3          07/25/2017, 03:45:58

Share this post


Link to post
Share on other sites

Fix for ICH10 with High Sierra. Now with hot-plug support.

 

For this we need two binary patches.

First patch fix I/O error for ICH10:

4585F60F 95C289C8 83E0FE66 85C9780F 84D2750B -> 89C883E0 FE6685C9 0F98C141 08CC9090 9090750B 

With second patch will work hot-plug:

89C82540 6002003D 40200000 750C81E1 BF7FFFFF 898B5101 0000 -> 90909090 90909090 90909090 90909090 90909090 90909090 9090

With these two patches I got ICH10 with hot-plug.

attachicon.gifСнимок экрана 2017-09-30 в 14.40.42.png

 

Good luck ;)

 

 

Sunki

 

I don't think this patch works for High Sierra 10.13.2...

 

Can you  confirm this?

 

What is the new patch?

Share this post


Link to post
Share on other sites

Because all the sata ports are well recognized, I try only Hot-Plug patch : Hot-Pluging work like a charm on my system. Great Job  :)

After patching, do the HDD icons shown as external ? (orange = hot swap capable)

I applied the patch but nothing change:

 

<key>KextsToPatch</key>

        <array>

            <dict>

                <key>Comment</key>

                <string>Fix hotplug for 10.13</string>

                <key>Find</key>

                <data>

                icglQGACAD1AIAAAdQyB4b9///+Ji1EBAAA=

                </data>

                <key>Name</key>

                <string>AppleAHCIPort</string>

                <key>Replace</key>

                <data>

                kJCQkJCQkJCQkJCQkJCQkJCQkJCQkJCQkJA=

                </data>

            </dict>

        </array>

Share this post


Link to post
Share on other sites

After patching, do the HDD icons shown as external ? (orange = hot swap capable)

I applied the patch but nothing change:

 

<key>KextsToPatch</key>

        <array>

            <dict>

                <key>Comment</key>

                <string>Fix hotplug for 10.13</string>

                <key>Find</key>

                <data>

                icglQGACAD1AIAAAdQyB4b9///+Ji1EBAAA=

                </data>

                <key>Name</key>

                <string>AppleAHCIPort</string>

                <key>Replace</key>

                <data>

                kJCQkJCQkJCQkJCQkJCQkJCQkJCQkJCQkJA=

                </data>

            </dict>

        </array>

You need this for Orange Icon HD

 

<dict>
     <key>Comment</key>
     <string>External icons patch</string>
     <key>Disabled</key>
     <false/>
     <key>Find</key>
     <data>RXh0ZXJuYWw=</data>
     <key>Name</key>
     <string>AppleAHCIPort</string>
     <key>Replace</key>
     <data>SW50ZXJuYWw=</data>
</dict>

Share this post


Link to post
Share on other sites

 

You need this for Orange Icon HD

 

<dict>
     <key>Comment</key>
     <string>External icons patch</string>
     <key>Disabled</key>
     <false/>
     <key>Find</key>
     <data>RXh0ZXJuYWw=</data>
     <key>Name</key>
     <string>AppleAHCIPort</string>
     <key>Replace</key>
     <data>SW50ZXJuYWw=</data>
</dict>

 

 

 

Thaks for your reply.

 

When hot plug is activated in BIOS, macOS shows the drives capable of that feature as external (orange icons), some users don't like that and apply this patch for change orange icons (it's just a cosmetic change).

 

I'm facing the oposite situation, I activate hot plug in BIOS but the icons don't change to orange as supose to, and Disk Utility report the drives are not ejectable, even using the second patch posted by SunKi (post #185).

Share this post


Link to post
Share on other sites
On 9/30/2017 at 3:09 AM, SunKi said:

Fix for ICH10 with High Sierra. Now with hot-plug support.

 

For this we need two binary patches.

First patch fix I/O error for ICH10:



4585F60F 95C289C8 83E0FE66 85C9780F 84D2750B -> 89C883E0 FE6685C9 0F98C141 08CC9090 9090750B 

With second patch will work hot-plug:



89C82540 6002003D 40200000 750C81E1 BF7FFFFF 898B5101 0000 -> 90909090 90909090 90909090 90909090 90909090 90909090 9090

With these two patches I got ICH10 with hot-plug.

post-234237-0-89322400-1506764449_thumb.png

 

Good luck ;)

How do you apply this patch? What do I need to do? I haven't applied these kinds of patches before.

Edited by Atomic_Sheep

Share this post


Link to post
Share on other sites

Has anyone figured out a method to update from 10.13.1 to 10.13.3 using incremental updates w/o having to reinstall from the macOS app store

Share this post


Link to post
Share on other sites
On 3/18/2018 at 10:40 PM, Frank Nitty said:

Has anyone figured out a method to update from 10.13.1 to 10.13.3 using incremental updates w/o having to reinstall from the macOS app store

 

Maybe this will work (assuming you are already on 10.13.1):

10.13.2 Update: https://support.apple.com/kb/DL1946?locale=en_US

10.13.2 Supplemental Update: https://support.apple.com/kb/DL1951?locale=en_US (this should probably be installed after the regular 10.13.2 update)

10.13.3 Update: https://support.apple.com/kb/DL1954?locale=en_US

OR

10.13.3 Combo Update: https://support.apple.com/kb/DL1953?locale=en_US

Edited by arsradu

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By t3s8r8
      Hi, anyone here got those problems like me ? When I click play, the film load nothing, just show blackscreen like this (attached) or when I download an episode to the computer, it shows error (err = -11800)

      Anyone here knows a fix ? Maybe a bug or problem from Hackintosh ?


    • By rguibi
      Hello

      I have a laptop HP EliteBook 840 G2 - Core i5 5300U - 2.3 GHz and graphic card intel HD5500 and installed a SIERRA , but the definition of the graphics card is not installed
    • By kushwavez
      Acer Aspire V15 V5-591G - Catalina 10.15.1
      This post will no longer updated, go for the osxlatitude link for further updates
      Original and updated link:
      https://osxlatitude.com/forums/topic/11355-acer-aspire-v-15-v5-591g-catalina-windows-10/
      (Note: mine is 55TU version, but the bootpack will work fine with another versions of 591G, for example: V5-591G-71K2, -764Z, -59PU, etc.)
      Specifications:
      - Motherboard: USOPP_SLS (Skylake-H PCH)
      - BIOS: Insyde Corp. v 1.15
      - CPU: Intel Core i5-6300HQ 2.3 GHz (Skylake)
      - GPU: NVIDIA GeForce GTX 950M 2 GB (Optimus) & Intel HD Graphics 530
      - RAM: SK hynix 4 GB DDR4 (Later I bought + KINGSTON 4 GB) 2133 MHz
      - WiFi + Bluetooth: Qualcomm Atheros QCNFA344A 5 GHz (Later -> Broadcom BRCM94352Z M.2 5 GHz WiFi + 4.0 Bluetooth)
      - Audio: Realtek HD Audio: ALC 255 
      - Ethernet: Realtek RTL8168/8111
      - Card Reader: Realtek USB 2.0 Card Reader (USB2.0-CRW)
      - Webcam: HD Webcam
      - HDD: TOSHIBA MQ01ACF032 320 GB HDD
      - SSD: SPCC M.2 230 GB SSD
      - Display: 1366x768 (15.6", Matte)
      - Battery: 6 cell 56Wh / 5040mAh
      - Connectors: 
      1x SD Card Reader 2x USB 3.0 (1x USB Charging), 1x USB 2.0 1x VGA 1x HDMI 1x 3.5mm microphone/audio combined jack connector 1x Ethernet (Rj-45) - Keyboard & Touchpad: Multi-Touch & Multi-gestures ELAN 501 Touchpad, Backlight Keyboard.
      Working:  
      - Wi-Fi (with BCM94352Z)
      - Bluetooth hand-off (With BCM94352Z)
      - Full Graphics enabled on HD 530: ig-platform-id: 0x191b0000 (HD 530 Mobile)
      - Display: if default colour profile is corrupted (blue is not actual blue but purplish) Use "Rec. ITU-R BT. 709-5" Color Profile (System Pref. -> Displays -> Color)
      - HDMI & VGA Outputs: AppleGraphicsDevicePolicy.kext Clover patch
      - Audio (ALC 255): (Internal Speakers, Internal Microphone, Headphone jack with AppleALC, ALCPlugFix -> layout-id=17)
      - Ethernet Realtek 8168/8111: RealtekRTL8111.kext
      - App Store, Messages, FaceTime, Siri, iCloud (native)
      - Integrated webcam (native)
      - 3.0 USB (native)
      - Touchpad and Keyboard (ELAN501): Fn keys are good, the weird thing is the Brightness key. On my keyboard it's Pause Break:Br-up, Fn+F12:Br-dwn-> To fix this try Karabiner (VoodoPS2Controller.kext), - for gestures try SmartTouchpad drivers
      - Battery info: Install ACPIBatteryManager.kext with Kext Utility or other installer.
      - Sleep Mode
      - SSD with TRIM enabled (to enable trim, open Terminal and write "sudo trimforce enable")
      Not working:
      - Original Wi-Fi (Qualcomm Atheros QCNFA344A):  unsupported, you need switch to BCM94352Z or just use a mini usb wifi dongle.
      - NVIDIA GeForce GTX 950M: Optimus not supported.
      - Card Reader: Unsupported -> Can't really fix because I don't have any SD Card at the moment, maybe can be fixed by adding Prod & Ven IDs to AppleStorageDevices.kext, I never used it anyway. name: "USB2.0-CRW" Prod ID: "0x0129" Ven ID: "0x0bda  (Realtek Semiconductor Corp.)"
      For Wi-Fi:
      - 1st method: You can choose an external USB wifi dongle (I used TP-Link Archer T1U (5GHz support), TP-Link has official macOS drivers, you just need to install it
      - 2nd and I think the best method: Replace your M.2 Qualcomm Card with a compatible BCM94352Z card (you will have hand-off Bluetooth too), just install the kexts (enabled with BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakePCIID.kext, FakePCIID_Broadcom_WiFi.kext, they're all in my attached zip). You could buy this card from ebay, aliexpress, or amazon
       
      Issues:
      - None
      BIOS Settings:
      - BIOS version 1.15 (irrelevant)
      - Secure Boot: Disabled
      - Touchpad: Advanced
      - Boot mode: UEFI
      Getting ready for Installation:
      - Download the Catalina install zip (bootpack & postinstall): acer_aspire_V591G-55TU_cata.zip
      Installation:
      - Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager)
      - Copy my Clover folder to the USB's EFI folder
      - Boot with the Installer USB
      - If you stuck in boot, reboot and in the Clover bootloader select "config_debug.cfg" -> you'll have more informations about the freeze
       
      Please open the README.rtf in my install zip for more informations about the USB Installer & Post installation!
      On Catalina the System folder is read-only, so you need to remount in rw to modify System/Library. 
      If you have a single RAM and getting panic at boot, then you need to edit the "config.plist" with these (SMBIOS->after "Version 1.0"):
      ->Edit "Frequency" and "Size" to match your RAM values
      <key>Version</key> <string>1.0</string> <key>Memory</key> <dict> <key>Channels</key> <integer>1</integer> <key>SlotCount</key> <integer>1</integer> <key>Modules</key> <array> <dict> <key>Slot</key> <integer>0</integer> <key>Size</key> <integer>8192</integer> <key>Frequency</key> <integer>2133</integer> <key>Type</key> <string>DDR4</string> </dict> </array> </dict> </dict>  
      PowerManagement  fix:
      Set HWPEnable=YES in Clover (already set), CPUFloor to "700", Frequency to "2300" and "3200"(Normal and Turbo, if you have i7-6700HQ version then it should be "2600", "3500") and "FrequencyVectors" from "0x0d000000" to "0x07000000" in "S/L/E/IOPlatformPluginFamily.kext/Contents/PlugIns/X86PlatformPlugin.kext/Contents/Resources/Mac-A5C67F76ED83108C.plist", MSR _xcpm_idle Patch to KernelToPatch in Clover (If you have High Sierra, change "MatchOS" to 10.13):

      <key>KernelToPatch</key> <array> <dict> <key>Comment</key> <string>MSR 0xE2 _xcpm_idle instant reboot(c) Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> ILniAAAADzA= </data> <key>MatchOS</key> <string>10.14</string> <key>Replace</key> <data> ILniAAAAkJA= </data> </dict> </array> Reboot, and it's 800MHz in idle state, same on Windows.
       

      Elan SmartTouchpad
      I only use scrolling, one-, double- & tripletap
      If you want to try other gestures go to this link for more informations, options (v4.6.5) ->  DETAILS ABOUT THE SMART TOUCHPAD DRIVER FEATURES
      Fn Brightness keys not working with this, tried several things without success. With VoodoPS2Controller it's working, but you'll have no gestures (neither scrolling).
       
       
      Before updating to a new version of Catalina please update kexts (and clover if necessary) to newer versions to avoid kernel panics.
      Generate a serial number with Clover Configurator.app (open up your config.plist with CC then -> SMBIOS -> Serial Number -> Generate New)
       
      Catalina & Windows 10 Dual-Boot:
      Dual-boot clean install (on one drive), UEFI Only:
       
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac),   Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart,  Boot into your Win installer, Format the partition you created for Win, install.   Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       5.  You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      Dual-boot with Windows installed first (on one drive), UEFI Only:
      If you already have Windows and you don't want to lose all your data there is a hope:
      I created a video from this restore method: [Hackintosh] Dual-Boot High Sierra & Windows - when Windows already installed - no data waste - UEFI
      You need bootable Mac Installer and a full system restore image (link is in my video's description).
      (You may see errors if your EFI partition is not 200 MB)
       Boot into your Windows, resize your partition or create one for Mac.  Boot into your Mac installer and in Disk Utility format the partition you created.  Restore from image: select your full system restore image.  When it's finished restoring you just need to restart, then boot to the system with your usb.  When you successfully booted to Mac desktop, mount your EFI partition (use terminal or an EFI mounter app), open EFI, you will see there is a Microsoft folder already (don't touch that!). Copy my CLOVER folder to the EFI folder then Restart.  Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       7.  You're done! You can select your old Windows and your new macOS!
      (Only tried with Windows 8/8.1/10. I don't know Windows 7,etc.)
       
      IF YOU GETTING ERRORS DURING MAC RESTORE:
      - Make sure you have partitions in GPT
      - Windows using 100 MB EFI and will annoy the Mac restore. Don't worry, just ignore the errors.
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      - Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)
       
      IF YOU USED RESTORE METHOD THEN CAN'T MOUNT YOUR EFI PARTITION (No EFI partition found):
      - It's because your EFI is not 200 MB or not an "Apple" original EFI,  but do not worry, try another EFI mounter, or mount from terminal (I used EFI mounter v3: Getting errors, but you can mount and use without problem)
      - You also could "mount" the EFI from Windows:
      1st method: open cmd in administrator mode and type:
      diskpart list vol (Now select the "System" volume,(FAT 32) For example I select 4) sel vol 4 list part (Select System type partition, for example 2) sel part 2 assign letter=b (This will "mount" your EFI partition) Open Explorer++ or TotalCommander in administrator mode to manage EFI remove letter=b (This will "unmount" your EFI) 2nd method: open cmd in administrator mode and type:
      mountvol b: /s (This will mount your EFI) Open Explorer++ or TotalCommander in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI) Thanks to all OSXLatitude members for helping me out! (Jake Lo, Hervé, Bronxteck, black.dragon74)!
      Notes:
      2019.11.03: Enabled SIP caused a lots of issues so now it's disabled -> updated bootpack
      2019.11.02: Updated to 10.15.1 -> no problem when/after installing
      2019.10.09: Installed macOS Catalina 10.15 -> Updated Clover, kexts & config.plist -> no problem so far
      2019.08.18: Updated to 10.14.6 -> no problem when/after installing
      2019.06.01: Updated to 10.14.5 -> no problem when/after installing
      2019.04.25: Optimized touchpad scrolling -> updated install files
      2019.03.30: Fixed USB 3.0 ports, fixed Bluetooth crashes after sleep -> updated bootpack
      2019.03.28: Updated to 10.14.4. Unexpected crashes while updating to 10.14.4 -> fixed by updating Clover to the latest (v4910) version. Bluetooth crashes appeared -> fixed by downgraded Brcm*.kexts. Updated bootpack.
      2019.02.24: Bluetooth crashes after sleep -> fixed, updated bootpack. 
      2019.02.22: Updated to 10.14.3. Fixed HDMI Audio by installing "FakePCIID_Intel_HDMI_Audio.kext" -> fixed freezing during boot. Fixed brightness levels by installing "AppleBacklightFixup.kext". Also updated bootpack & postinstall zip down in attachments.
      2019.01.21: Removed FakeSMC.kext, SMCHelper-64.efi, replaced by VirtualSMC.kext, VirtualSMC.efi because I got random freezes when booting system (kextd stall[0], (120s): 'AppleACPICPU' -> CPU is at 100%, fans are spinning fast), also updated bootpack in the attachments "acer_aspire_v591g-55tu_clover.zip" -> Freeze continued, brought back FakeSMC, deleted VirtualSMC (caused BT crashes).
      2019.01.18: HDMI Audio is fixed, I didn't do anything HDMI Audio is not fixed, sometimes it worked but most likely not. (no idea why)
      2018.12.09: Updated to 10.14.2 -> did without any complication
      2018.11.28: Fixed combo-jack garbage sound output by installing ALCPlugFix and CodecCommander.kext
      2018.11.01: Updated to 10.14.1 -> HDMI & VGA ports are gone again. -> Fixed by "AppleIntelSKLGraphicsFramebuffer.kext" rollback from 10.14.
      2018.09.28: Updated to Mojave 10.14 -> Fixed HDMI & VGA Outputs by adding "AppleGraphicsDevicePolicy.kext" patches to config.plist, HDMI audio not working
    • By fusion71au
      Clover r5101 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r5101 for VMware.zip". Mount Clover-v2.5k-5101-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By fantomas
      macOS Catalina 10.15.3 beta (19D49f)
×