Jump to content
Allan

macOS High Sierra - Final Release is out! (17A365)

448 posts in this topic

Recommended Posts

I think Istat Menue 7 have this Futur ?

Yup, thanks  :)

Share this post


Link to post
Share on other sites
Advertisement

Istat 6 sorry  :lol:

but not sure if it does

Yes it does  :yes: 

post-1502423-0-81570300-1507387306_thumb.png

 

Share this post


Link to post
Share on other sites

Installing macOS High Sierra 17A405 on my IvyBridge was a peace of cake, but installing it on the SkyLake rig was a bit more complicated. It gave me the same OSInstall.mpkg error but the weird thing is that I did sucessfully installed it few days ago but today it was not that easy to install, but regardless here we are :D

post-1011040-0-42732000-1507387677_thumb.png

post-1011040-0-53610400-1507387678_thumb.png

Share this post


Link to post
Share on other sites

Installing macOS High Sierra 17A405 on my IvyBridge was a peace of cake, but installing it on the SkyLake rig was a bit more complicated. It gave me the same OSInstall.mpkg error but the weird thing is that I did sucessfully installed it few days ago but today it was not that easy to install, but regardless here we are :D

after updating  10.13 supplemental update ,the system crashed  with old webdriver..

Share this post


Link to post
Share on other sites

after updating  10.13 supplemental update ,the system crashed  with old webdriver..

yup, the same thing happened here, I had to do a clean install today.

 

Eversince I installed the new supplemental update I get the "System Preferences crashed" error on startup.

P.S.:

Cuda crashes on startup.

 

P.P.S.: Re-installing cuda fixed the crash

Share this post


Link to post
Share on other sites

yup, the same thing happened here, I had to do a clean install today.

 

Eversince I installed the new supplemental update I get the "System Preferences crashed" error on startup.

P.S.:

Quda crashes on startup

yes, i must  do a clean install today. and updated  the new supplemental update then installed new webdriver...all worksed fine now...i think it is better to switch to rx580

Share this post


Link to post
Share on other sites

yes, i must  do a clean install today. and updated  the new supplemental update then installed new webdriver...all worksed fine now...i think it is better to switch to rx580

to be honest I'm thinking about switching back to AMD as well.

Share this post


Link to post
Share on other sites

yes, i must  do a clean install today. and updated  the new supplemental update then installed new webdriver...all worksed fine now...i think it is better to switch to rx580

Download latest installer.app, no Update 

http://www.insanelymac.com/forum/topic/327488-macos-high-sierra-final-release-is-out-17a365/?p=2510188

Share this post


Link to post
Share on other sites

Istat 6 sorry  :lol:

but not sure if it does

 

I replaced /System/Library/CoreServices/Menu Extras/battery.menu with the one from 10.12.1. It works:

 

post-1502423-0-50939500-1507390665_thumb.png

Battery.menu.zip

Share this post


Link to post
Share on other sites

@chris1111

 

hi..

I mean ..the new installer on post #267...

 

the  "MACOSXInstaller.dmg" (available at your site)for Hght Sierra  has the update as refers the post #267?

 

and does the "MACOSXInstaller-Auto.dmg" has the new installer as referred on post #267?

thank you.

c.frio

Share this post


Link to post
Share on other sites

@chris1111

 

hi..

I mean ..the new installer on post #267...

 

the  "MACOSXInstaller.dmg" (available at your site)for Hght Sierra  has the update as refers the post #267?

 

and does the "MACOSXInstaller-Auto.dmg" has the new installer as referred on post #267?

thank you.

c.frio

New Installer is from Apple

Install macOS High Sierra.app

Share this post


Link to post
Share on other sites

Fix for ICH10 with High Sierra. Now with hot-plug support.

 

For this we need two binary patches.

First patch fix I/O error for ICH10:

4585F60F 95C289C8 83E0FE66 85C9780F 84D2750B -> 89C883E0 FE6685C9 0F98C141 08CC9090 9090750B 

With second patch will work hot-plug:

89C82540 6002003D 40200000 750C81E1 BF7FFFFF 898B5101 0000 -> 90909090 90909090 90909090 90909090 90909090 90909090 9090

With these two patches I got ICH10 with hot-plug.

attachicon.gifСнимок экрана 2017-09-30 в 14.40.42.png

 

Good luck ;)

How to apply this patch?

 

what is the dfiference between this and https://github.com/kozlek/HWSensors ?

 

greetings

Share this post


Link to post
Share on other sites

How to apply this patch?

If using Clover:

 

Config.plist->KernelAndKextPatches->kextsToPatch:

Name: AppleAHCIPort
Find: 4585F60F 95C289C8 83E0FE66 85C9780F 84D2750B
Replace: 89C883E0 FE6685C9 0F98C141 08CC9090 9090750B

Name: AppleAHCIPort
Find: 89C82540 6002003D 40200000 750C81E1 BF7FFFFF 898B5101 0000
Replace: 90909090 90909090 90909090 90909090 90909090 90909090 9090

If not using Clover, manually edit AppleAHCIPort with a hex editor

Share this post


Link to post
Share on other sites

If using Clover:

 

Config.plist->KernelAndKextPatches->kextsToPatch:

Name: AppleAHCIPort
Find: 4585F60F 95C289C8 83E0FE66 85C9780F 84D2750B
Replace: 89C883E0 FE6685C9 0F98C141 08CC9090 9090750B

Name: AppleAHCIPort
Find: 89C82540 6002003D 40200000 750C81E1 BF7FFFFF 898B5101 0000
Replace: 90909090 90909090 90909090 90909090 90909090 90909090 9090

If not using Clover, manually edit AppleAHCIPort with a hex editor

 

Can this patch run fine with Z270 mobos?

Share this post


Link to post
Share on other sites

How to apply this patch?

 

what is the dfiference between this and https://github.com/kozlek/HWSensors ?

 

greetings

 

 

Slice's FakeSMC apparently has fix for EmuVariableUefi-64 which leads to OSInstall.mpkg error. Unsure about the other.

 

Sent from my SM-G930F using Tapatalk

 

 

I didn't know that there was a new version from Kozlek, I had lost location services when upgraded to HS. However, now it's working again, I don't know what that was about, is there any relation with FakeSMC and location services?

 

Anyway, thank for pointing out that :)

Share this post


Link to post
Share on other sites

How do you guys enable trim on High Sierra with APFS? And do you? I've read about some problems (long boot?) if trim command is used in Terminal, so I am still running my APFS SSD without it.

Share this post


Link to post
Share on other sites

How do you guys enable trim on High Sierra with APFS? And do you? I've read about some problems (long boot?) if trim command is used in Terminal, so I am still running my APFS SSD without it.

TRIM enabled by default.. maybe just on nvme

Share this post


Link to post
Share on other sites

in kexts to patch

IOAHCIBlockStorage

f

00415050 4c452053 534400

r

00000000 00000000 000000

How do you guys enable trim on High Sierra with APFS? And do you? I've read about some problems (long boot?) if trim command is used in Terminal, so I am still running my APFS SSD without it.

 

post-468967-0-08729700-1507464842_thumb.png

Share this post


Link to post
Share on other sites

Someone told me that "We are in a great Forum, so, let's have some fun and learn from each other!"

So, I wanna share my stories after re-installing APFS-10.13 (17A365) with SIP: Enabled from pre- till post-install succeeded:

 

1. Installer: (OFC) a Retail macOS 10.13 downloaded from Mac App Store. USB Installer using createinstallmedia or Boot Buddy (GUI)

 

2. Bootloader: Using Legacy Clover v2.4k r4243 w/o rc.script I got no "OSInstall.mpkg" missing / corrupted error again, though with "RecoveryHD" environment looks a like installation UI with no Languages selection chooser as a greeting. For SMBios is MBP10,1 with default values generated by Clover Configurator v4.5.3. And still same since DP1, I removed nvram.plist found from all my partitions before proceeding (there're already another OSes installed on a single Disk)

 

3. Graphics: My Nvidia Fermi GF119 however has known issue with random windowserver crash since 10.12 using native / web driver, though QE/CI was enabled. I then tried reconfiguring it using Web Driver with SIP: Enabled (no longer need for NVWebValidationFix) and yeah, same crash with non-native display resolutions but get much better: my crazy cursor behavior has gone! Oh wait, just a little bit problem with abnormal logoff-reboot-shutdown except replacing NVDAResman.kext with DP1 has (for sure, not applied for web driver). It works well on 10.11.x as my daily use with InjectNvidia=True/False or with GFX0 Graphics personalities within my patched DSDT, just forget it under newer macOS versions.

 

4. TouchPad (PS2 ELAN_101): This is I think, the funny part or maybe sounds illogical... using EmlyDinesh's ApplePS2SmartTouchpad v4.7 b5 since 10.13 DP1 I got a blank trackpad under Preferences, my TP however still detected as a mouse (previously was using 10.11.6's trackpad.Pref for temp solution to work). At the first time reaching the Desktop after did a clean install, I then accidentally connected my USB Mouse to the port and voilaaa... my TP Pref no longer became blank and all features are back again automatically illogically..!!! I think I loss my mind, then turning my wifi on.. and yes, now get motion video guides on TP Pref.

 

5. Battery: Using @Slice's FakeSMC v3.5.0 and VoodooBattery v1.4.2 the indicator shown on Apple Menu Bar.

 

My another devices fortunately (as seen on sig), just work except AR3011 BT, known incompatible RTL-CardReader, WebCam works with CamTwist, but.. aah, NP.

That is guys for my "stories", not a successful guide nor even tutorial so.., if U don't mind just simply, ignore it..!!!  :P. This concludes my 17A365 (I mean, on my mach) before updating to 17A405 and going to be 'crazy' again, happily.

 

#EDIT: Plz note regarding to SIP: Enabled, I only use this on Legacy..!!!

post-826765-0-31064300-1507471806_thumb.png

post-826765-0-54774900-1507471891_thumb.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By t3s8r8
      Hi, anyone here got those problems like me ? When I click play, the film load nothing, just show blackscreen like this (attached) or when I download an episode to the computer, it shows error (err = -11800)

      Anyone here knows a fix ? Maybe a bug or problem from Hackintosh ?


    • By rguibi
      Hello

      I have a laptop HP EliteBook 840 G2 - Core i5 5300U - 2.3 GHz and graphic card intel HD5500 and installed a SIERRA , but the definition of the graphics card is not installed
    • By kushwavez
      Acer Aspire V15 V5-591G - Catalina 10.15.1
      This post will no longer updated, go for the osxlatitude link for further updates
      Original and updated link:
      https://osxlatitude.com/forums/topic/11355-acer-aspire-v-15-v5-591g-catalina-windows-10/
      (Note: mine is 55TU version, but the bootpack will work fine with another versions of 591G, for example: V5-591G-71K2, -764Z, -59PU, etc.)
      Specifications:
      - Motherboard: USOPP_SLS (Skylake-H PCH)
      - BIOS: Insyde Corp. v 1.15
      - CPU: Intel Core i5-6300HQ 2.3 GHz (Skylake)
      - GPU: NVIDIA GeForce GTX 950M 2 GB (Optimus) & Intel HD Graphics 530
      - RAM: SK hynix 4 GB DDR4 (Later I bought + KINGSTON 4 GB) 2133 MHz
      - WiFi + Bluetooth: Qualcomm Atheros QCNFA344A 5 GHz (Later -> Broadcom BRCM94352Z M.2 5 GHz WiFi + 4.0 Bluetooth)
      - Audio: Realtek HD Audio: ALC 255 
      - Ethernet: Realtek RTL8168/8111
      - Card Reader: Realtek USB 2.0 Card Reader (USB2.0-CRW)
      - Webcam: HD Webcam
      - HDD: TOSHIBA MQ01ACF032 320 GB HDD
      - SSD: SPCC M.2 230 GB SSD
      - Display: 1366x768 (15.6", Matte)
      - Battery: 6 cell 56Wh / 5040mAh
      - Connectors: 
      1x SD Card Reader 2x USB 3.0 (1x USB Charging), 1x USB 2.0 1x VGA 1x HDMI 1x 3.5mm microphone/audio combined jack connector 1x Ethernet (Rj-45) - Keyboard & Touchpad: Multi-Touch & Multi-gestures ELAN 501 Touchpad, Backlight Keyboard.
      Working:  
      - Wi-Fi (with BCM94352Z)
      - Bluetooth hand-off (With BCM94352Z)
      - Full Graphics enabled on HD 530: ig-platform-id: 0x191b0000 (HD 530 Mobile)
      - Display: if default colour profile is corrupted (blue is not actual blue but purplish) Use "Rec. ITU-R BT. 709-5" Color Profile (System Pref. -> Displays -> Color)
      - HDMI & VGA Outputs: AppleGraphicsDevicePolicy.kext Clover patch
      - Audio (ALC 255): (Internal Speakers, Internal Microphone, Headphone jack with AppleALC, ALCPlugFix -> layout-id=17)
      - Ethernet Realtek 8168/8111: RealtekRTL8111.kext
      - App Store, Messages, FaceTime, Siri, iCloud (native)
      - Integrated webcam (native)
      - 3.0 USB (native)
      - Touchpad and Keyboard (ELAN501): Fn keys are good, the weird thing is the Brightness key. On my keyboard it's Pause Break:Br-up, Fn+F12:Br-dwn-> To fix this try Karabiner (VoodoPS2Controller.kext), - for gestures try SmartTouchpad drivers
      - Battery info: Install ACPIBatteryManager.kext with Kext Utility or other installer.
      - Sleep Mode
      - SSD with TRIM enabled (to enable trim, open Terminal and write "sudo trimforce enable")
      Not working:
      - Original Wi-Fi (Qualcomm Atheros QCNFA344A):  unsupported, you need switch to BCM94352Z or just use a mini usb wifi dongle.
      - NVIDIA GeForce GTX 950M: Optimus not supported.
      - Card Reader: Unsupported -> Can't really fix because I don't have any SD Card at the moment, maybe can be fixed by adding Prod & Ven IDs to AppleStorageDevices.kext, I never used it anyway. name: "USB2.0-CRW" Prod ID: "0x0129" Ven ID: "0x0bda  (Realtek Semiconductor Corp.)"
      For Wi-Fi:
      - 1st method: You can choose an external USB wifi dongle (I used TP-Link Archer T1U (5GHz support), TP-Link has official macOS drivers, you just need to install it
      - 2nd and I think the best method: Replace your M.2 Qualcomm Card with a compatible BCM94352Z card (you will have hand-off Bluetooth too), just install the kexts (enabled with BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakePCIID.kext, FakePCIID_Broadcom_WiFi.kext, they're all in my attached zip). You could buy this card from ebay, aliexpress, or amazon
       
      Issues:
      - None
      BIOS Settings:
      - BIOS version 1.15 (irrelevant)
      - Secure Boot: Disabled
      - Touchpad: Advanced
      - Boot mode: UEFI
      Getting ready for Installation:
      - Download the Catalina install zip (bootpack & postinstall): acer_aspire_V591G-55TU_cata.zip
      Installation:
      - Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager)
      - Copy my Clover folder to the USB's EFI folder
      - Boot with the Installer USB
      - If you stuck in boot, reboot and in the Clover bootloader select "config_debug.cfg" -> you'll have more informations about the freeze
       
      Please open the README.rtf in my install zip for more informations about the USB Installer & Post installation!
      On Catalina the System folder is read-only, so you need to remount in rw to modify System/Library. 
      If you have a single RAM and getting panic at boot, then you need to edit the "config.plist" with these (SMBIOS->after "Version 1.0"):
      ->Edit "Frequency" and "Size" to match your RAM values
      <key>Version</key> <string>1.0</string> <key>Memory</key> <dict> <key>Channels</key> <integer>1</integer> <key>SlotCount</key> <integer>1</integer> <key>Modules</key> <array> <dict> <key>Slot</key> <integer>0</integer> <key>Size</key> <integer>8192</integer> <key>Frequency</key> <integer>2133</integer> <key>Type</key> <string>DDR4</string> </dict> </array> </dict> </dict>  
      PowerManagement  fix:
      Set HWPEnable=YES in Clover (already set), CPUFloor to "700", Frequency to "2300" and "3200"(Normal and Turbo, if you have i7-6700HQ version then it should be "2600", "3500") and "FrequencyVectors" from "0x0d000000" to "0x07000000" in "S/L/E/IOPlatformPluginFamily.kext/Contents/PlugIns/X86PlatformPlugin.kext/Contents/Resources/Mac-A5C67F76ED83108C.plist", MSR _xcpm_idle Patch to KernelToPatch in Clover (If you have High Sierra, change "MatchOS" to 10.13):

      <key>KernelToPatch</key> <array> <dict> <key>Comment</key> <string>MSR 0xE2 _xcpm_idle instant reboot(c) Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> ILniAAAADzA= </data> <key>MatchOS</key> <string>10.14</string> <key>Replace</key> <data> ILniAAAAkJA= </data> </dict> </array> Reboot, and it's 800MHz in idle state, same on Windows.
       

      Elan SmartTouchpad
      I only use scrolling, one-, double- & tripletap
      If you want to try other gestures go to this link for more informations, options (v4.6.5) ->  DETAILS ABOUT THE SMART TOUCHPAD DRIVER FEATURES
      Fn Brightness keys not working with this, tried several things without success. With VoodoPS2Controller it's working, but you'll have no gestures (neither scrolling).
       
       
      Before updating to a new version of Catalina please update kexts (and clover if necessary) to newer versions to avoid kernel panics.
      Generate a serial number with Clover Configurator.app (open up your config.plist with CC then -> SMBIOS -> Serial Number -> Generate New)
       
      Catalina & Windows 10 Dual-Boot:
      Dual-boot clean install (on one drive), UEFI Only:
       
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac),   Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart,  Boot into your Win installer, Format the partition you created for Win, install.   Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       5.  You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      Dual-boot with Windows installed first (on one drive), UEFI Only:
      If you already have Windows and you don't want to lose all your data there is a hope:
      I created a video from this restore method: [Hackintosh] Dual-Boot High Sierra & Windows - when Windows already installed - no data waste - UEFI
      You need bootable Mac Installer and a full system restore image (link is in my video's description).
      (You may see errors if your EFI partition is not 200 MB)
       Boot into your Windows, resize your partition or create one for Mac.  Boot into your Mac installer and in Disk Utility format the partition you created.  Restore from image: select your full system restore image.  When it's finished restoring you just need to restart, then boot to the system with your usb.  When you successfully booted to Mac desktop, mount your EFI partition (use terminal or an EFI mounter app), open EFI, you will see there is a Microsoft folder already (don't touch that!). Copy my CLOVER folder to the EFI folder then Restart.  Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       7.  You're done! You can select your old Windows and your new macOS!
      (Only tried with Windows 8/8.1/10. I don't know Windows 7,etc.)
       
      IF YOU GETTING ERRORS DURING MAC RESTORE:
      - Make sure you have partitions in GPT
      - Windows using 100 MB EFI and will annoy the Mac restore. Don't worry, just ignore the errors.
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      - Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)
       
      IF YOU USED RESTORE METHOD THEN CAN'T MOUNT YOUR EFI PARTITION (No EFI partition found):
      - It's because your EFI is not 200 MB or not an "Apple" original EFI,  but do not worry, try another EFI mounter, or mount from terminal (I used EFI mounter v3: Getting errors, but you can mount and use without problem)
      - You also could "mount" the EFI from Windows:
      1st method: open cmd in administrator mode and type:
      diskpart list vol (Now select the "System" volume,(FAT 32) For example I select 4) sel vol 4 list part (Select System type partition, for example 2) sel part 2 assign letter=b (This will "mount" your EFI partition) Open Explorer++ or TotalCommander in administrator mode to manage EFI remove letter=b (This will "unmount" your EFI) 2nd method: open cmd in administrator mode and type:
      mountvol b: /s (This will mount your EFI) Open Explorer++ or TotalCommander in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI) Thanks to all OSXLatitude members for helping me out! (Jake Lo, Hervé, Bronxteck, black.dragon74)!
      Notes:
      2019.11.03: Enabled SIP caused a lots of issues so now it's disabled -> updated bootpack
      2019.11.02: Updated to 10.15.1 -> no problem when/after installing
      2019.10.09: Installed macOS Catalina 10.15 -> Updated Clover, kexts & config.plist -> no problem so far
      2019.08.18: Updated to 10.14.6 -> no problem when/after installing
      2019.06.01: Updated to 10.14.5 -> no problem when/after installing
      2019.04.25: Optimized touchpad scrolling -> updated install files
      2019.03.30: Fixed USB 3.0 ports, fixed Bluetooth crashes after sleep -> updated bootpack
      2019.03.28: Updated to 10.14.4. Unexpected crashes while updating to 10.14.4 -> fixed by updating Clover to the latest (v4910) version. Bluetooth crashes appeared -> fixed by downgraded Brcm*.kexts. Updated bootpack.
      2019.02.24: Bluetooth crashes after sleep -> fixed, updated bootpack. 
      2019.02.22: Updated to 10.14.3. Fixed HDMI Audio by installing "FakePCIID_Intel_HDMI_Audio.kext" -> fixed freezing during boot. Fixed brightness levels by installing "AppleBacklightFixup.kext". Also updated bootpack & postinstall zip down in attachments.
      2019.01.21: Removed FakeSMC.kext, SMCHelper-64.efi, replaced by VirtualSMC.kext, VirtualSMC.efi because I got random freezes when booting system (kextd stall[0], (120s): 'AppleACPICPU' -> CPU is at 100%, fans are spinning fast), also updated bootpack in the attachments "acer_aspire_v591g-55tu_clover.zip" -> Freeze continued, brought back FakeSMC, deleted VirtualSMC (caused BT crashes).
      2019.01.18: HDMI Audio is fixed, I didn't do anything HDMI Audio is not fixed, sometimes it worked but most likely not. (no idea why)
      2018.12.09: Updated to 10.14.2 -> did without any complication
      2018.11.28: Fixed combo-jack garbage sound output by installing ALCPlugFix and CodecCommander.kext
      2018.11.01: Updated to 10.14.1 -> HDMI & VGA ports are gone again. -> Fixed by "AppleIntelSKLGraphicsFramebuffer.kext" rollback from 10.14.
      2018.09.28: Updated to Mojave 10.14 -> Fixed HDMI & VGA Outputs by adding "AppleGraphicsDevicePolicy.kext" patches to config.plist, HDMI audio not working
    • By fusion71au
      Clover r5101 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r5101 for VMware.zip". Mount Clover-v2.5k-5101-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By fantomas
      macOS Catalina 10.15.3 beta (19D49f)
×