Jump to content
srmusico

No Audio and Restart when shutdown Gigabyte H270 HD3

3 posts in this topic

Recommended Posts

¡Hello Guys!

 

im here with a new build to make a fully working Hackintosh.

 

The components are: 

 

-Gigabyte H270 HD3

-i5 7400

-8 GB Ram Corsair LPX 2400 MHZ

-Samsung 850 evo  250 GB SSD

-Integrated Kabylake graphics

 

 

All are working and bootable but I have 3 problems:

 

-Audio Realtek ALC 887 is not working (I tried with kexts but it doesn't shows anything)

 

-The system restart when I press shutdown 

 

-I can only show 1 monitor when I have 2 plugged, (one in HDMI Port and the other in DVI Port)

 

 

Could you help me with these?

 

¡thanks you so much!!

Here are my files and clover folder:

CLOVER.zip

iMac ioreg.zip

Send me iMac.zip

Share this post


Link to post
Share on other sites
Advertisement

Okey, guys,  I have done the audio part with Toleda´s Method :D

Now I have ordered a Nvidia cheap card to use dual monitor.

(cause im not getting work the dual monitor with intel)

 

The final problem is.

Why the computer restart when I want shutdown ?

this happens if I have a USB device inserted in front USB 3.0 Ports.

 

¡Thanks for the help!

Share this post


Link to post
Share on other sites

Okey, guys,  I have done the audio part with Toleda´s Method :D

Now I have ordered a Nvidia cheap card to use dual monitor.

(cause im not getting work the dual monitor with intel)

 

The final problem is.

Why the computer restart when I want shutdown ?

this happens if I have a USB device inserted in front USB 3.0 Ports.

 

¡Thanks for the help!

Enable Haltenabler in config file.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By ITzTravelInTime
      KX AUDIO DRIVER MOD
       
      Hi guys i am a small developer, i really like to use my sound blaster cards on my machines and i love also coding, so when i find the source code for the kx audio driver on git hub and then Eugene, the creator of kx audio driver decided to no longer maintain the project, i decided to start working on a mod of this driver. 
       
      With my mod, created starting from the sources of the last version of kx audio driver, and also by using apple developer documentation for pci and audio drivers as reference, i am working to achieve 2 things mainly: get all the cards supported by the driver to work with all the recent versions os macOS and add support for other cards that are not officially supported by the driver that works or could, but needs to be more properly supported.
       
      This driver is made to support cards based on the E-mu 10k1, 10k2 and similars (like what is used by audigy rx and audigy 4 cards).
       
      Supported cards are:
       
       - most of the sound blaster live!, live! 5.1 and live! 5.1 digital series
       - sound blaster 512
       - sound blaster 256
       - other creative and e-mu sound cards based on the 10k1 chip (cards with the ES1370/ES1371/ES1372/ES1373 chips are not supported)
       - sound blaster Audigy series (1 st gen)
       - sound blaster Audigy 2  and audigy 2 zs series
       - E-MU cards based on the 10k2 sound chip
       - Some Audigy 4 cards (SB0610 only) and the audigy 4 pro
       - Sound blaster Audigy RX (sb0155)
       - other creative and e-mu cards based on the (10k2, 10k2,5 and CA10300 based cards)
       
      NOT supported cards:
       
       - Any ISA Sound card
       - ES1370/ES1371/ES1372/ES1373 based sound cards
       - CMI8738/CMI8788 based cards
       - Any CA0106 based card and cards with similar architectures (like sound blaster live! 24 bit, sound blaster audigy SE SB0570, audigy LS and similars, but audigy SA is supported)
       - Any sound blaster x-fi (some of them works on macOS using a modified version of voodoo hda)
       - Any sound blaster recon3D
       - Any sound blaster Z/ZS/ZX and similar series
       - Any sound blaster AE5 series
       
      In the time being the things i have modded or added with this mod are:
       
      - increased the simple buffer frames number with different values for emu10k1 based cards and emu10k2 based cards (including recent audigy 4 and rx) to reduce and all the audio cracking issues and possibly fixing all of them on a lot of cards
       
      - added a more proper support for the pci express sound blaster audigy rx (which basically is an audigy 4 with a pcie bridge chip) 
       
      - added more fancy names for the cards in the settings and other menus (so the name will be, for example, SB live! 5.1 SB0060 instead of kx SB0060 [e880] witch was shown in the original driver)
       
      - added support to sample rate changing and added lots of sample rates (from 8 khz to 176,4 khz) to accomodate any possible usecase (note that 10k1 sound cards are limited up to 48khz sample rate, and 10k2 based cards are limited to 176,4 khz because of issues getting 192 khz to work, for now the driver goes up to 176,4 khz for such cards) 
       
      - added boot args to manage the driver:
       
      Boot args to use with the kx audio driver mod: -kx_disable or -kxdisable or -kxoff This will prevent the driver from doing any initialization work, so the driver is basically disabled, use it to boot your ssytem in case the driver is giving you issues and kernel panics while you are trying to boot/using your system, so you are able to remove this driver or replace it with another version of it or to do some truble shooting. -kx_debug or -kxdebug or -kxspec Will show more debug info about the card, mainly the i/o port address and the kind of bus that it uses -kx_exp_deb or -kx_beta or -kxbeta Will enable experimental and probably not working or unstable features like showing inputs for the card or 192 khz sampling rate, use it only for testing and debug purposes, this may likely cause instability and problems in the everyday usage! Use it at your own risk! -kx_original or -kxoriginal This will basically turn off almost all the mods of this mod, so the driver will come to work as it was before modding it, this can be usefoul as a "safe mode" like feture to have a working driver in case of problems with features of the mod, so using this means no crsking issues improvements, only 48 khz sample rate and only features of the non-modded kx audio driver for mac os x  
      - created a script file to use with the driver for installing the driver and also to load/unload, update, repolace it and it's libraries.
       
      What i'd like to implement but i don't know how to do:
       
       - I'd like mainly to add a more proper support to the pci bridge chip of the audigy rx,
       
       - have audio inputs working,
       
       - fix the support when using more than one card, to get all the cards shown in the settings and other menus,
       
       - have the gameport/midi port of older cards to be used in mac os as a midi in/out
       
      If other developers would like to join and help me, you can, and also an hand from other people with testing and feedback will be nice.
       
      link for the kext only (if you have clover put it in [your clover efi folder]/clover/kexts/[your macOS version]/ so it will not be deleted when updating macOS):
               - download from the downloads section:          kX Audio Driver Mod by ITzTravelInTime 1.01                                                                                    - external download:                                      https://dl.dropboxus...Driver.kext.zip   link for the installer pack (the best way to install it, but you have to reinstall it when you upgrade macOS, remeber to fix kext permitions and rebuild the kernelcache if you want to remove the kext from it's install directory without using the unistall feature of the provvided script):              - download:                                                   https://dl.dropboxus...aller pack.zip   Source code from Git Hub:          -  github repo:                                               https://github.com/ITzTravelInTime/kx-audio-driver   NOTE: Some system because of some problems with the HPET may need to use FixHPET in clover and to install the kext in /System/Library/Extensions or to do other kind of hpet mods to run the driver properly, but only on some systems, most systems should not require it  






    • By moman2000
      Hi,
       
      I thought it would be nice that I would be the first here to give my experience with getting Mojave running and mostly working on my system.
       
      My specifications are as follows:
       
      iMac 14,2
       
      GIGABYTE GA-Z97X-UD5H / Intel Core i7-4770k @ 4.4GHz / 16GB Corsair Vengeance DDR3 @ 1600MHz
      MSI AMD Radeon HD 7870 2GB OC
      250GB SanDisk Ultra 3D NAND SSD / 120GB OCZ Agility 3 SSD
      1TB 5.4K HDD
       
      I used the config that @MaLd0n helped me with. Seriously, he is a legend. HERE is my Clover Config including everything I use for 10.13 High Sierra and 10.14 Mojave.
       
      Installation Procedure:
       
       
      Create bootable USB media with createinstallmedia - sudo /Applications/Install\ macOS\ 10.14\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/"Insert Volume Name here"  ***** Remove quotation marks!!! 
       
      **"--Applicationpath" is now depreciated and should not be used when making a 10.14 Mojave USB. I do not know if this will change in upcoming releases.
       
      ** ConvertToAPFS is now depreciated and no longer works when installing 10.14 Mojave beta 1. Using the command "--converttoapfs NO" will not work if you use it with "createinstallmedia".
       
      Editing "minstallconfig.xml" within the "macOS Install Data" folder on the target partition chosen during installation to change "ConvertToAPFS" from "TRUE" to "FALSE" would also not disable APFS conversion.
       
      Installation ran through well, but it did restart just after installation began which seemed to have been caused by a crash, but it seemed like it was normal as this happened twice as I tried installing Mojave earlier and the same thing happened. Rebooting again into the installation on the target drive that was selected before described as "macOS Install"  and named "macOS 10.14" resumed installation.
       
      Everything from then on was easy and smooth. I set-up my iCloud and things as such and was brought to the desktop of macOS 10.14 Mojave!
       
       
      What does work:
       
      Graphics (Acceleration/Metal) // 4K video dropped 0 frames // Picture-in-Picture
      Mouse and Keyboard
      USB 3.0 -  Full 5 GBP/s - Only ports above HDMI Port and front I/O
      USB 3.0 under both Intel and Killer Ethernet ports function with USB 2.0 devices.
      Ethernet (only Intel NIC so far) Both NIC's work, Intel I217-V and Killer E2200
      iMessage
      Sleep and Wake
      Shutdown
      Restart
       
      Update #1:
       
      Temporary Fix: ***I have gotten audio to work after browsing Reddit, I stumbled across this post: https://www.reddit.com/r/hackintosh/comments/8orn7w/mojave_files_needed/e05kkj9/
       
      Update #2:
       
      I have just found a kext for the on-board Killer E2200 NIC after searching with device and vendor ID's on this forum.
      https://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/
       
      Update #3:
       
      Audio is now fully operational with new version 1.2.8 of AppleALC, from here: 
       
      What does NOT work:
       
      USB 3 under Intel I217-V NIC and Killer E2200 NIC Ethernet Ports // Only function with USB 2.0 devices.
      Audio Temporary fix in Update #1 above   Fixed in Update #3
      Killer E2200 NIC Fixed in Update #2 above
       
       
       
      This is the information I have been able to gather thus far whilst using Mojave.
       
      I hope this helps someone in getting Mojave running on their system.
       
      Regards,
      Mohamed
       
       
      CLOVER_moman2000 No SN.zip







    • By MaLd0n
      First... If you need DSDT edits... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Run it, post files generated in your desktop RunMe.app  Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder  CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder CLOVER.zip   --Reboot and activate video!   -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   -DSDT My DSDT DSDT.GA H97M-DS3P MaLd0n.zip   -Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF -HDMI





      -FakeSMC
      https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek -Audio https://github.com/vit9696/AppleALC -LAN https://github.com/Mieze/IntelMausiEthernet   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By MaLd0n
      Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder   CLOVER Install.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   CLOVER Post Install.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By MaLd0n
      ***The topic is for Notebooks and Desktops***   First... ***Update bios to last available version!***   If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   This guide is not a step by step, if you need one, see here   Look at my Clover folders and understand what we really need, this is the best way to learn     1-Installation     --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder  -Serie 100/200/300 CLOVER.zip   --Install Sierra/High Sierra and boot into system! 2-Post Installation     --Install Clover in HDD/SSD and replace with my folder -Serie 100/200/300 CLOVER.zip   --Reboot and activate video!   3-Video     -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/ -Check it, easy way nvidia-update.command.zip by Benjamin-Dobell   4-DSDT     --DSDT mobo GA Z270 Gaming K3 DSDT.MaLd0n Gigabyte GA Z270 Gaming K3.zip   --DSDT mobo Asus ROG STRIX Z370 F Gaming DSDT.MaLd0n Asus ROG STRIX Z370 F Gaming.zip   --DSDT mobo Asus ROG Strix Z370-G Gaming DSDT.Asus ROG Strix Z370-G Gaming.zip   --DSDT mobo GA Z170XP SLI DSDT.MaLd0n GA Z170XP SLI.zip   --DSDT mobo ASROCK Z170  EXTREME 7 DSDT.MaLd0n ASROCK Z170 EXTREME 7.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC* -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS* -BLC0 -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -IMEI -EC -PNLF(Nvidia/AMD) -HDMI ---To avoid problems use some patches in config.plist, don't forget!--- GLAN to GIGE 474c 414e 4749 4745 GFX0 to IGPU 47465830 49475055 HDAS to HDEF 48444153 48444546 HECI to IMEI 48454349 494d4549 SAT0 to SATA 53415430 53415441 5-SSDT   Generate your SSDT for PM, use ssdtPRGen by Piker-Alpha https://github.com/Piker-Alpha ssdtPRGen.command.zip   or just use "plugin-type"=0x01 in DSDT, SSDT or Clover config.plist   for check Power, Frequency, Temperature and Utilization, use it Install Intel Power Gadget.pkg.zip   6-Brightness  
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
        -Clover   https://sourceforge.net/projects/cloverefiboot/files/Installer/   -Lan driver by Mieze     -Atheros http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   -Links     -FakeSmc https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   if u like, Rate Topic     It's time to Rock -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, badruzeus and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
×