Jump to content

1,356 posts in this topic

Recommended Posts

04 06 01 03 is connectors Sense ID. You can determine connector priority by swaping sense ID. 04 - DVI, 06 - DVI, 01 - DP, 03 - HDMI. So your priority is DVI, DVI, DP, HDMI. You can swap it. 

 

Example:

Be default you have this connectors: 

con @ 0 is type 00000400 (DP  ).   flags 00000304 feat 0100 pri 0000 txmit 12 enc 04 hotplug 02 sense 01

con @ 1 is type 00000800 (HDMI)  flags 00000204 feat 0100 pri 0000 txmit 22 enc 05 hotplug 03 sense 03
con @ 2 is type 00000004 (DVI )    flags 00000004 feat 0100 pri 0000 txmit 01 enc 02 hotplug 01 sense 04
con @ 3 is type 00000004 (DVI )    flags 00000004 feat 0100 pri 0000 txmit 00 enc 00 hotplug 06 sense 06
 
pri=0000 for ALL 4 connetors (priority). Without specific priority. DP, HDMI, DVI, DVI
 
After Applying connector priority 04 06 01 03
 
rad @ getConnectorInfo found 4 senses in connector-priority
rad @ reprioritiseConnectors setting priority of sense 04 to 1 by sense
rad @ reprioritiseConnectors setting priority of sense 06 to 2 by sense
rad @ reprioritiseConnectors setting priority of sense 01 to 3 by sense
rad @ reprioritiseConnectors setting priority of sense 03 to 4 by sense
rad @ getConnectorsInfo resulting 4 connectors follow
con @ 0 is type 00000400 (DP  ).  flags 00000304 feat 0100 pri 0003 txmit 12 enc 04 hotplug 02 sense 01
con @ 1 is type 00000800 (HDMI) flags 00000204 feat 0100 pri 0004 txmit 22 enc 05 hotplug 03 sense 03
con @ 2 is type 00000004 (DVI ).  flags 00000004 feat 0100 pri 0001 txmit 01 enc 02 hotplug 01 sense 04
con @ 3 is type 00000004 (DVI ).  flags 00000004 feat 0100 pri 0002 txmit 00 enc 00 hotplug 06 sense 06
 

You can see that pri (priority) is changed. 04=1, 06=2, 01=3, 03=4. This is your order - 04060103 DVI, DVI, HDMI, DP

 

Now you have to try all 16 combinations

04060103

06040103

04060301

etc...

I can change the priority to whatever I want but it always says "getConnectorInfo leaving unchaged priority" and pri is 0000 for every connector.

What value should "PciAddr" have? Is this something special or can I leave it 01:00.00 like in your example?

Share this post


Link to post
Share on other sites
Advertisement

I can change the priority to whatever I want but it always says "getConnectorInfo leaving unchaged priority" and pri is 0000 for every connector.

What value should "PciAddr" have? Is this something special or can I leave it 01:00.00 like in your example?

 

You can see pciadr in clover log. Type in terminal 

bdmesg

and search this lines

0:102  0:000  === [ GetDevices ] ========================================
0:102  0:000  PCI (00|00:00.00) : 8086 591F class=060000
0:102  0:000  PCI (00|00:01.00) : 8086 1901 class=060400
0:102  0:000  PCI (00|01:00.00) : 1002 6798 class=030000
0:102  0:000   - GFX: Model=AMD Radeon HD 7970X/8970/R9 280X (ATI/AMD)
0:102  0:000   - RADEON_BIOS_0_SCRATCH = 0x00000050
0:102  0:000  PCI (00|01:00.01) : 1002 AAA0 class=040300
0:102  0:000   - HDMI Audio: 
0:102  0:000  PCI (00|00:02.00) : 8086 5912 class=038000
0:102  0:000   - GFX: Model=Intel HD Graphics 630 (Intel)
0:102  0:000  PCI (00|00:14.00) : 8086 A12F class=0C0330
0:102  0:000  PCI (00|00:16.00) : 8086 A13A class=078000
0:102  0:000  PCI (00|00:17.00) : 8086 A102 class=010601
0:102  0:000  PCI (00|00:1B.00) : 8086 A167 class=060400
0:102  0:000  PCI (00|00:1B.02) : 8086 A169 class=060400
0:103  0:000  PCI (00|03:00.00) : 14E4 43A0 class=028000
0:103  0:000   - WIFI: Vendor=Broadcom
0:103  0:000  PCI (00|00:1B.03) : 8086 A16A class=060400
0:103  0:000  PCI (00|04:00.00) : 1B21 0612 class=010601
0:103  0:000  PCI (00|00:1C.00) : 8086 A110 class=060400
0:103  0:000  PCI (00|05:00.00) : 1B21 1242 class=0C0330
0:103  0:000  PCI (00|00:1D.00) : 8086 A118 class=060400
0:103  0:000  PCI (00|00:1F.00) : 8086 A145 class=060100
0:103  0:000  PCI (00|00:1F.02) : 8086 A121 class=058000
0:103  0:000  PCI (00|00:1F.03) : 8086 A170 class=040300
0:103  0:000  PCI (00|00:1F.04) : 8086 A123 class=0C0500
0:103  0:000  PCI (00|00:1F.06) : 8086 15B8 class=020000
0:103  0:000   - LAN: 0 Vendor=Intel

In my case PCI Adress of Graphics card is 01:00.00

Share this post


Link to post
Share on other sites

You can see pciadr in clover log. Type in terminal 

bdmesg

and search this lines

0:102  0:000  === [ GetDevices ] ========================================
0:102  0:000  PCI (00|00:00.00) : 8086 591F class=060000
0:102  0:000  PCI (00|00:01.00) : 8086 1901 class=060400
0:102  0:000  PCI (00|01:00.00) : 1002 6798 class=030000
0:102  0:000   - GFX: Model=AMD Radeon HD 7970X/8970/R9 280X (ATI/AMD)
0:102  0:000   - RADEON_BIOS_0_SCRATCH = 0x00000050
0:102  0:000  PCI (00|01:00.01) : 1002 AAA0 class=040300
0:102  0:000   - HDMI Audio: 
0:102  0:000  PCI (00|00:02.00) : 8086 5912 class=038000
0:102  0:000   - GFX: Model=Intel HD Graphics 630 (Intel)
0:102  0:000  PCI (00|00:14.00) : 8086 A12F class=0C0330
0:102  0:000  PCI (00|00:16.00) : 8086 A13A class=078000
0:102  0:000  PCI (00|00:17.00) : 8086 A102 class=010601
0:102  0:000  PCI (00|00:1B.00) : 8086 A167 class=060400
0:102  0:000  PCI (00|00:1B.02) : 8086 A169 class=060400
0:103  0:000  PCI (00|03:00.00) : 14E4 43A0 class=028000
0:103  0:000   - WIFI: Vendor=Broadcom
0:103  0:000  PCI (00|00:1B.03) : 8086 A16A class=060400
0:103  0:000  PCI (00|04:00.00) : 1B21 0612 class=010601
0:103  0:000  PCI (00|00:1C.00) : 8086 A110 class=060400
0:103  0:000  PCI (00|05:00.00) : 1B21 1242 class=0C0330
0:103  0:000  PCI (00|00:1D.00) : 8086 A118 class=060400
0:103  0:000  PCI (00|00:1F.00) : 8086 A145 class=060100
0:103  0:000  PCI (00|00:1F.02) : 8086 A121 class=058000
0:103  0:000  PCI (00|00:1F.03) : 8086 A170 class=040300
0:103  0:000  PCI (00|00:1F.04) : 8086 A123 class=0C0500
0:103  0:000  PCI (00|00:1F.06) : 8086 15B8 class=020000
0:103  0:000   - LAN: 0 Vendor=Intel

In my case PCI Adress of Graphics card is 01:00.00

 

Mine is 02:00.00. But even if I use that WhateverGreen doesn't seem to detect it. It always says "getConnectorInfo leaving unchaged priority".

 

My bdmesg looks like the following:

0:100  0:000  PCI (00|02:00.00) : 1002 67B0 class=030000
0:100  0:000   - GFX: Model=AMD Radeon R9 290X (ATI/AMD)
0:100  0:000   - RADEON_BIOS_0_SCRATCH = 0x00000000

I don't have an R9 290x but an R9 390x. I assume this should not be a problem as I can't find an R9 390x in bdmesg so I'm using 02:00.00.

 

Also bdmesg says the following:

0:784  0:000  === [ GetUserSettings ] ===================================
0:784  0:000  Add 1 devices:
0:784  0:000   - [00]: [02:00.00]  (Inject AMD R9 properties)

Which means connector-priority should be there but WhateverGreen nevertheless doesn't detect (or use) it.

 

I have 5 connectors as you can see there:

2017-09-03 00:18:26.910178+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorsInfo found 5 connectors
2017-09-03 00:18:26.910185+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 0 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0000 txmit 12 enc 04 hotplug 02 sense 01
2017-09-03 00:18:26.910191+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 1 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0000 txmit 10 enc 00 hotplug 05 sense 05
2017-09-03 00:18:26.910197+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 2 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0000 txmit 20 enc 01 hotplug 06 sense 06
2017-09-03 00:18:26.910203+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 3 is type 00000800 (HDMI) flags 00000204 feat 0100 pri 0000 txmit 22 enc 05 hotplug 03 sense 03
2017-09-03 00:18:26.910209+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 4 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0000 txmit 01 enc 02 hotplug 01 sense 04

So I use connector-priority like "0103050604". Also, I have the type "data" selected. Should it rather be string?

 

Here is an image for reference:

 

mJJEIcn.png

Share this post


Link to post
Share on other sites

Mine is 02:00.00. But even if I use that WhateverGreen doesn't seem to detect it. It always says "getConnectorInfo leaving unchaged priority".

 

Hm... Could you upload your EFI folder? And please hit F4 in Clover GUI. I want to see original ACPI tables...

 

upd. And give me your full Lilu and WhateverGreen log.

Share this post


Link to post
Share on other sites

Hm... Could you upload your EFI folder? And please hit F4 in Clover GUI. I want to see original ACPI tables...

 

upd. And give me your full Lilu and WhateverGreen log.

This one is my EFI folder:

 

https://drive.google.com/file/d/0B6II6Rf-XjIzc203Q3htekxDdzQ/view?usp=sharing

 

And this one the full WhateverGreen and lili log:

 

https://drive.google.com/file/d/0B6II6Rf-XjIzZHYwNVNaczRuVWM/view?usp=sharing

 

The Clover config.plist is in the EFI folder so you can see it there.

Share this post


Link to post
Share on other sites

This one is my EFI folder

 

Well. According to your log everything is fine. Connector-priority is working

2017-09-03 13:08:05.263967+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 01 to 1 by sense
2017-09-03 13:08:05.263971+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 03 to 2 by sense
2017-09-03 13:08:05.263976+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 05 to 3 by sense
2017-09-03 13:08:05.263980+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 06 to 4 by sense
2017-09-03 13:08:05.263984+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 04 to 5 by sense
2017-09-03 13:08:05.263988+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorsInfo resulting 5 connectors follow
2017-09-03 13:08:05.263993+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 0 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0001 txmit 12 enc 04 hotplug 02 sense 01
2017-09-03 13:08:05.263998+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 1 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0003 txmit 10 enc 00 hotplug 05 sense 05
2017-09-03 13:08:05.264004+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 2 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0004 txmit 20 enc 01 hotplug 06 sense 06
2017-09-03 13:08:05.264010+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 3 is type 00000800 (HDMI) flags 00000204 feat 0100 pri 0002 txmit 22 enc 05 hotplug 03 sense 03
2017-09-03 13:08:05.264016+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 4 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0005 txmit 01 enc 02 hotplug 01 sense 04
2017-09-03 13:08:05.264023+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty caught model 19 (AMD Radeon HD 8xxx)
2017-09-03 13:08:05.264028+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData vendor-id has 1002 value
2017-09-03 13:08:05.264032+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData device-id has 67B0 value
2017-09-03 13:08:05.264036+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData revision-id has 80 value
2017-09-03 13:08:05.264040+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData subsystem-vendor-id has 174B value
2017-09-03 13:08:05.264044+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData subsystem-id has E324 value
2017-09-03 13:08:05.264048+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty autodetect found for 1002:67B0:0080 174B:E324
2017-09-03 13:08:05.264053+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty autodetect found AMD Radeon R9 390X

Look at the pri. 

 

So now you have to swap connectors to determine working pattern for you. 

In your case it is 25 combinations :)

Share this post


Link to post
Share on other sites

Well. According to your log everything is fine. Connector-priority is working

2017-09-03 13:08:05.263967+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 01 to 1 by sense
2017-09-03 13:08:05.263971+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 03 to 2 by sense
2017-09-03 13:08:05.263976+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 05 to 3 by sense
2017-09-03 13:08:05.263980+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 06 to 4 by sense
2017-09-03 13:08:05.263984+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 04 to 5 by sense
2017-09-03 13:08:05.263988+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorsInfo resulting 5 connectors follow
2017-09-03 13:08:05.263993+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 0 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0001 txmit 12 enc 04 hotplug 02 sense 01
2017-09-03 13:08:05.263998+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 1 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0003 txmit 10 enc 00 hotplug 05 sense 05
2017-09-03 13:08:05.264004+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 2 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0004 txmit 20 enc 01 hotplug 06 sense 06
2017-09-03 13:08:05.264010+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 3 is type 00000800 (HDMI) flags 00000204 feat 0100 pri 0002 txmit 22 enc 05 hotplug 03 sense 03
2017-09-03 13:08:05.264016+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 4 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0005 txmit 01 enc 02 hotplug 01 sense 04
2017-09-03 13:08:05.264023+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty caught model 19 (AMD Radeon HD 8xxx)
2017-09-03 13:08:05.264028+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData vendor-id has 1002 value
2017-09-03 13:08:05.264032+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData device-id has 67B0 value
2017-09-03 13:08:05.264036+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData revision-id has 80 value
2017-09-03 13:08:05.264040+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData subsystem-vendor-id has 174B value
2017-09-03 13:08:05.264044+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData subsystem-id has E324 value
2017-09-03 13:08:05.264048+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty autodetect found for 1002:67B0:0080 174B:E324
2017-09-03 13:08:05.264053+0200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty autodetect found AMD Radeon R9 390X

Look at the pri. 

 

So now you have to swap connectors to determine working pattern for you. 

In your case it is 25 combinations :)

 

Wow you are right thank you! It works now and the combination I used was "0105060304" - so DP DP DP HDMI DVI. Just for reference.

 

Thank you again, you are awesome!

Share this post


Link to post
Share on other sites

hi guys

I've just installed whatevergreen on my recently Sierra install on my Z270/I5 7400 setup. I'm going to drop an MSI RX 560 in two days in there, so I have setup everything I though I should, including wtgreen and modifying some files (to add the correct FF value vs EF value:) 

lot of precious information in this topic so I had to say thanks (and that's prior to installing the card, which is dangerous I know:) )

Share this post


Link to post
Share on other sites

Wow you are right thank you! It works now and the combination I used was "0105060304" - so DP DP DP HDMI DVI. Just for reference.

 

Thank you again, you are awesome!

 

So, what is your R9 390x? I have a Gigabyte and am hoping to be lazy... edit: you have a sapphire

Also, did you only have lilu and whatevergreen, and make the change in your custom properties or are there other steps?

 

edit: 

0:108  0:000  PCI (00|B3:00.00) : 1002 67B0 class=030000

0:108  0:000   - GFX: Model=AMD Radeon R9 290X (ATI/AMD)

0:108  0:000   - RADEON_BIOS_0_SCRATCH = 0x00000000

 

so my PCI address is B3:00.00 right? (edit: starting to think this is wrong. I've made a bunch of priority changes and the pri 0000 doesn't change at any point).

And I'll have to try all my (5) connectors after that - in the custom properties.

 

being a combo of these:

2017-09-04 16:51:30.843926+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorsInfo resulting 5 connectors follow

2017-09-04 16:51:30.858038+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 0 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0000 txmit 12 enc 04 hotplug 02 sense 01

2017-09-04 16:51:30.874063+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 1 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0000 txmit 10 enc 00 hotplug 05 sense 05

2017-09-04 16:51:30.889940+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 2 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0000 txmit 20 enc 01 hotplug 06 sense 06

2017-09-04 16:51:30.905788+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 3 is type 00000800 (HDMI) flags 00000204 feat 0100 pri 0000 txmit 22 enc 05 hotplug 03 sense 03

2017-09-04 16:51:30.921658+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 4 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0000 txmit 01 enc 02 hotplug 01 sense 04

2017-09-04 16:51:30.937403+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty caught model 19 (AMD Radeon HD 8xxx)

2017-09-04 16:51:30.951435+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) util @ getOSData vendor-id has 1002 value

 

2017-09-04 16:51:30.964964+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) util @ getOSData device-id has 67B0 value

 

so 0105060304 etc etc

 

Sorry about the noob questions.

 

Thanks!

Pete

Share this post


Link to post
Share on other sites

So, what is your R9 390x? I have a Gigabyte and am hoping to be lazy... edit: you have a sapphire

Also, did you only have lilu and whatevergreen, and make the change in your custom properties or are there other steps?

 

edit: 

0:108  0:000  PCI (00|B3:00.00) : 1002 67B0 class=030000

0:108  0:000   - GFX: Model=AMD Radeon R9 290X (ATI/AMD)

0:108  0:000   - RADEON_BIOS_0_SCRATCH = 0x00000000

 

so my PCI address is B3:00.00 right? (edit: starting to think this is wrong. I've made a bunch of priority changes and the pri 0000 doesn't change at any point).

And I'll have to try all my (5) connectors after that - in the custom properties.

 

being a combo of these:

2017-09-04 16:51:30.843926+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorsInfo resulting 5 connectors follow

2017-09-04 16:51:30.858038+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 0 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0000 txmit 12 enc 04 hotplug 02 sense 01

2017-09-04 16:51:30.874063+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 1 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0000 txmit 10 enc 00 hotplug 05 sense 05

2017-09-04 16:51:30.889940+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 2 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0000 txmit 20 enc 01 hotplug 06 sense 06

2017-09-04 16:51:30.905788+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 3 is type 00000800 (HDMI) flags 00000204 feat 0100 pri 0000 txmit 22 enc 05 hotplug 03 sense 03

2017-09-04 16:51:30.921658+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 4 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0000 txmit 01 enc 02 hotplug 01 sense 04

2017-09-04 16:51:30.937403+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty caught model 19 (AMD Radeon HD 8xxx)

2017-09-04 16:51:30.951435+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) util @ getOSData vendor-id has 1002 value

 

2017-09-04 16:51:30.964964+1200  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) util @ getOSData device-id has 67B0 value

 

so 0105060304 etc etc

 

Sorry about the noob questions.

 

Thanks!

Pete

If I understood it correctly, your address should be B3:00.00. Also you may need to scroll a little bit because it appears twice in the log. One time with pri 0000 and one time with the changed priorities. Just give it another try...And try to put your Displayport to the start in the priority list...

 

I just use lilu and whatevergreen and the only thing I changed was the connector-priority...

Share this post


Link to post
Share on other sites

Hm... Could you upload your EFI folder? And please hit F4 in Clover GUI. I want to see original ACPI tables...

 

upd. And give me your full Lilu and WhateverGreen log.

just wanted to tell you a few users are having issues now clover kext injection was updated and it's having issues with WEG https://www.dropbox.com/s/z06mz7ahvvyx5y6/Clover_v2.4k_r4206.zip?dl=0

 

 

Share this post


Link to post
Share on other sites

Thanks for your prompt and kind help.

Now HDMI audio from R9 290X working in my Intel i7 920 (MB: ASUS P6TSE) hackintosh for the first time  at 10.12.5, 10.12.6 & 10.13 beta5 (17A330h) !

[Edit]

It's also working at 10.12.5 in P6TSE hackintosh.

 

At 10.13(17A360a) Dual screen output from Display and HDMI are enabled and both DP audio & HDMI audio working at the same time from AMD R9 290X in my P6TSE hackintosh !

It can wake-up from S3 sleep without previous blank screen issue now !

post-70188-0-20533700-1505297053_thumb.png

post-70188-0-62045100-1505297062_thumb.png

Share this post


Link to post
Share on other sites

I'm experiencing strange behavior of RX 560. Suddenly performance drops (can happen on cold boot or just after an hour of using the computer) to a third. As you can see from the Novabench scores only Metal is affected while OpenCL performance is not. Has anyone any idea what might cause this?

post-94739-0-74067100-1505306253_thumb.png

post-94739-0-62628600-1505306389_thumb.png

Share this post


Link to post
Share on other sites

hello, I used AMD Radeon R9 380 4096 MB Card,It works fine at  10.12.6 Sierra  when I used the lilu and whatevergreen.But when I try to update to 10.13 Beta, I got a black screen. May be the lilu and whatevergreen dosen't work.


At 10.13(17A360a) Dual screen output from Display and HDMI are enabled and both DP audio & HDMI audio working at the same time from AMD R9 290X in my P6TSE hackintosh !

It can wake-up from S3 sleep without previous blank screen issue now !

Luck guy,my R9 380 4GB got a black screen at 10.13。 

Share this post


Link to post
Share on other sites

Hi, just wanted to chime in that I successfully got my MSI Gaming R9 390 fully working on High Sierra thanks to WhateverGreen and Lilu!

For the first time since El Capitan I can boot without IGP! Additionally, sleep is fully functional.  :D

 

To get this working I had to implement a fake device ID in clover using the arbitrary feature. Finding out how to do this was pretty difficult since there is no documentation on this feature AFAIK. Here is the relevant section in Clover Configurator: KMGiPaG.png

The PciAddr might be different depending on what slot your graphics card is in and your motherboard, you can find this in the GetDevices section of bdmesg.

 

Additionally, I cleared out the FakeID section of the Clover config as well as the entire graphics section (Inject ATI needs to be off). No extra boot flags are necessary.

 

Thank you to the developer for creating this amazing software, and I hope this post helps someone out!  :)

 

yj96JUN.png

Share this post


Link to post
Share on other sites

I'm experiencing strange behavior of RX 560. Suddenly performance drops (can happen on cold boot or just after an hour of using the computer) to a third. As you can see from the Novabench scores only Metal is affected while OpenCL performance is not. Has anyone any idea what might cause this?

I just found out: It is Safari! The drop in Metal performance always happens after starting Safari and can only be solved by sleep and wake. Can that behavior be related to whatevergreen.kext in any way? 

*Update* To be more specific: The bug appears after watching Youtube videos but only when using Safari, Chrome does not slow down the graphics card at all. I've read about some "state0-bug" with RX 480 cards that cause a lockdown of core an memory frequencies. Could that be what is happening?

Share this post


Link to post
Share on other sites

I have the setup as per my sig, using an ASUS Strix RX580 OC 8GB graphics card.

 

I have dual boot NVme - with one running normal Sierra 10.12.6 - it is using Lilu & WhateverGreen & the card is detected fine & is working well (still need to get 2nd monitor going, but that's not priority right now).

 

The issue is when I try to install High Sierra, It get's through the boot & then when it should change to the grey graphics, I just get a black screen. I am using the latest Lilu and WhateverGreen. This is on install from USB

 

Any ideas ? why would it work ok on Sierra, but not High Sierra ?

Share this post


Link to post
Share on other sites

Found my issue, was to do with CSM not being disabled in BIOS.

 

When I had installed 10.12.6 Sierra I had tried to disable this & my PC wouldn't start, had to reset BIOS and then Sierra installed correctly with CSM enabled.

 

For High Sierra it is black screen without CSM disabled. Managed to disable now & no more black screen

 

Any idea why CSM enabled works on 10.12.6 and not 10.13.x ?

Share this post


Link to post
Share on other sites

Hey guys,

I have a RX 560 with macOS 10.13.
I get a freeze every few hours. The mouse can be move and i can listen music but screen is freezing. Its very strange.

 

maybe one has a idea how to fix, i add my clover config.

 

config.plist.zip

 

post-1233605-0-67569400-1506450707_thumb.png

Share this post


Link to post
Share on other sites

hi guys. i have seen that lily has been updated to 1.2 version. same thing happened to shiki.

the issue is that i can't load whatevergreen on high sierra with lily 1.2

any tips?

Share this post


Link to post
Share on other sites

My Hackintosh

 

mobo: Gigabyte GA-990XA-UD3

CPU: AMD FX-6300

Mem: 2x4GB

On Board Audio Codec: ALC889

OS: SierraAMD 10.12.6 with kernel for AMD by Shaneee

 

Now, can anybody tell me if I can use lilu.kext and AppleALC.kext to have native audio on this system?

I have read that lilu.kext and AppleALC.kext (as well as WhateverGreen.kext) are built for Intel CPUs, but some people here have reported to have used them succesfully with AMD CPUs as well. So, what will it take to use them in my system?

 

Edit: keep in mind that I have experimented with the kexts. I put the two kexts in EFI/CLOVER/kexts/Other and I turn the Sys.Par. "InjectKexts" into YES in Clover configuration. The kexts are successfully loaded (checked them out with "Kext Wizard") but nothing happens. No sound device recognized (the sound device window in System Preferences is empty) and the sound icon on the panel is grey. When I trash the kexts and re-install VoodooHDA everything works, but...the sound Is not very good, there is always some noise in the background (even though I have turned the onboard microphone inputs -back and front- to zero gain). So, I would prefer native audio.

 

thanks in advance

Share this post


Link to post
Share on other sites

hi guys. i have seen that lily has been updated to 1.2 version. same thing happened to shiki.

the issue is that i can't load whatevergreen on high sierra with lily 1.2

any tips?

Lilu has been updated to 1.1.7 on his releases page. Where did you see 1.2 ???

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By chris1111
      Here my theme of OC 
      Resources.zip

       
      Resource with new Tool icon
      Resources-New Tool icon.zip
       
      Black version Update sector 30
      Black version Selector30.zip
       
      Change the selector in the simple theme 
      thanks @blackosx
      Selector 10
      Resources Slector10.zip
      Selector 40
      Resources Slector40.zip
      Resource 10 with new tool icon
      Resources Slector10 new tool.zip
       
      New Selected invisible and Metal Selector attach

       
      Selector.icns.zip
      Selected.icns.zip
    • By EmriBG
      Hello everyone,
      I found a guide on how to install Catalina on Lenovo M920q, everything works well but the installation is freezing up.
      The USB bootable drive is a recovery one with internet based installation. The internet is working well on the pre-installation setup (I tested it, when you can use the utilities).
      The installation is freezing whether I am installing the macOS or not.
      I've attached my EFI partition so you can check if there's anything to add.
      Will realy appreciate any kind of help (quit noob to the whole thing).
      Thanks in advance and stay safe!
       
      NOTE: I did followed up the troubleshooting guide of OpenCore installation forum and the answer was to add the  NullCPUPowerManagement.kext to the kexts and configure it on the .plist file.
      This is the original EFI folder: EFI.zip
      Thats the one with the NullCPUPowerManagement.kext added: EFI.zip
       
       
       
       
    • By tlefko
      Site
      checkout our official site! https://twortech.wixsite.com/pcmac Version Info
      This build is compatible up to Big Sur Beta
      Now Compatible with macOS 11 Please leave feedback with issues or w/o Comitted to Updating up to OS 11 Latest Release Notes
      Fixed Bluetooth and Wifi Stability Issues Improved Preformance and Power Managements Can Provide Files for Display Overrides Additional Patches for 4K Display updated for Big Sur if using unsupported wifi card disable it in bios use config.plist FIXED SLEEP WAKE BUG Exact same functionality as Catalina What Works / Does Not
      Everything works minus in-built mic Some displays may be detected as 40hz (working on fix) Notes
      Never tested USB C over Display Output, everything else works flawlessly USB devices eject on sleep (not really an issue) POST
      run sudo pmset -a hibernatemode 0 If no mouse, install all voodoo kexts using Kext Utility Description
      This esentially an ultra-simplistic version that is stable without the use of a deploy or complicated file installations and copies. You can easily view all the SSDT patches along with configuration files for the bootloader as they are all documented clearly in the files. This does include a copy of Clover, which of course I do not contribute to and am only responsible for the provided files, patches, and kext placements This guide provides a working setup with little knowledge of the topic and without "optimization" (because often they can break things). But, it is fully functional and preforms properly and is stable Make sure you are using DW1560 for wifi or else KP. If not using remove BRCM kexts from CLOVER>kexts>other. BIOS Setup
      Disable Secure Boot INSTALL (VERY IMPORTANT)
      Due to structural changes in the setup of apple's Big sur, this EFI cannot boot the installer it can only boot into a system / device that has already been created and setup. To do this, you need to install Big Sur to a virtual machine (lots of guides online) and then create an dmg of that system, and restore it onto your HDD using the 'dd' command There are various guides online how to get this virtual machine setup complete. You can then use the attached EFI folder to boot and use macOS big Sur You can use this video to show you how to get your macOS pre-installed onto your hard drive https://www.youtube.com/watch?v=HMU3nhcbWHw Boot Entry Setup
      Due to the fact this BIOS is locked down pretty heavily, reccomended to use Windows to find a free tool to add UEFI boot entries Messages and Facetime
      Gnerate your own Serials, Board Numbers, MLB There are various guides online to do this and as default they're set to essentially Null (Fakeserial) This is fairly straightforward and there is lots of external recourses, or you can contact me for support. Headphones and Audio
      All audio from speakers should work perfectly along with Bluetooth and USB audio no internal mic Credits
      MaLd0n for DSDT Patches (HUGE SHOUTOUT) Original Kext Authors Clover Team Finished!
      Congratulations, there really aren't any more steps that are required. Feel free to contact me with any questions. Donations
      Send me a coffee/beer lefkotyler@gmail.com  
       
      *check GitHub for latest releases and faster support https://github.com/tlefko/HP-Envy-13-Big-Sur
      EFI.zip
    • By tonyx86
      **********************************************************************************
      In this thread, I have fully documented the installation of macOS Catalina on my HP EliteDesk 800 G4 Mini. It is a PERFECT HackMini8,1 and is running very well for me without any issues. I hope this documentation helps you to install macOS on your hack. Please leave feedback if you think there is anything I can improve and let me know if you have any questions.
      **********************************************************************************
       
      Background
      This is my first "modern" hack supporting UEFI and my first hack using Clover "on-the-fly" patches.  My previous hacks
      Laptop: Thinkpad T61 / Nvidia NVS 140m Laptop: Dell Latitude E6410 / Nvidia G3100m Desktop: Gigabyte G31 / GeForce 9600 Desktop: Biostar TH55HD / Sapphire Pulse RX580 (Google "Catalina Biostar TH55HD" and look for user name deeveedee)  
      are all perfectly running Catalina and I patched them all "manually" - all DSDT patches applied with MaciSL with virtually no Clover on-the-fly patching and all booted Legacy Clover.  This UEFI hack was MUCH easier and took about 20 hours vs. a combined hundreds of hours for the old hacks.  I wanted a hack that was a little more future proof and I think this is it.  I hope you enjoy this as much as I am enjoying it.  It is a perfect MacMini8,1.
       

       
      My system specs
      HP EliteDesk 800 G4 Mini (I7-8700T / UHD 630 / Q370 Chipset / 32GB DDR4 RAM) 3 x DP Ports (connected to monitors using DP -> DVI adapters) 6 x USB 3.1 1 x USB Type-C 3.1 2 x NVMe SSD (M.2 PCIe x4 2280/2230 combo ports) 1 x SATA6 SSD 1 x Intel Ethernet RJ-45 Conexant CX20632 Audio Codec Unsupported M.2 PCIe x1 2230 Intel Wi-Fi.  A possible solution is here, but I am NOT offering any support for this.  
      macOS Installation 
      Important: You MUST BE LOGGED-IN to download attachments from this forum
      See macOS installation steps here See Known Issues here for additional installation steps that may not yet be included in my attached config files See CLOVER (UEFI) installation later in this first post
      See BIOS configuration in attached BIOS configuration PDF document
      See EFI and /L/E kexts in attached EliteDesk.zip archive See how I developed my installation methodology here See references here See instructions here for installing two M.2 2280 NVMe SSDs and one SATA HD / SSD  
      What is not working
      Microphone port  
      What is not tested
      USB c 3.1 port (I have partially tested the USB 3 functionality of the port and it seems to be working fine with the SSDT-UIAC.aml in the attached EliteDesk800.zip archive) Wi-Fi / Bluetooth (intentional since I have not yet replaced my Intel card). A possible solution is here, but I am not offering any support for this.
       
      What is working
      Everything not mentioned above Sleep / Wake Multiple displays with IGPU graphics acceleration, hot pluggable display ports and DP->DVI adapters USB 3.1 ports Audio (internal speaker and headphone jack) Ethernet Auto-sensing headphone jack automatically switches to internal speaker when headphones removed  
      Known Issues and their solutions - see here
       
      BIOS Version / Configuration
      Version: 02.11.01 Rev.A See attached BIOS configuration in PDF document "HP EliteDesk 800 G4 Mini BIOS Configuration.pdf" Intel ME must be enabled for proper sleep / wake of UHD 630
       
      Clover Configuration
      Clover for UEFI booting only Install Clover in the ESP UEFI Drivers Recommended drivers DataHubDxe FSInject SMCHelper File System drivers ApfsDriverLoader VBoxHfs Memory fix drivers AptioMemoryFix Additional drivers NvmExpressDxe Install RC scripts on target volume Themes Choose your desired theme Install Clover Preference Pane (option not available when installing on USB thumb drive)  
      UHD 630 Framebuffer Patching
      See here and here to understand my graphics properties for use with WhateverGreen.kext Read this to see my attempt at graphics patching without WhateverGreen.kext (WEG) to get a better understanding of what WEG is doing
       
      Current Versions
      Catalina 10.15.6 Clover (UEFI) r5119 Lilu.kext 1.4.5 WhateverGreen.kext 1.4.0 AppleALC.kext 1.5.0 IntelMausi 1.0.3 (Not IntelMausiEthernet)  
      Credits To be provided
       
      ScreenShots
       
       
      HP EliteDesk 800 G4 Mini BIOS Configuration.pdf
       
      EliteDesk800 G4 Mini - Rev 1.0.zip
    • By PropoFlexWX4
      This new case will be arriving for me tomorrow.
       
      It's the model M25-W White Version.
       
       
      It has an integrated 7.1 sound card.
      Which means the machine will effectively have 2 sound cards...
       
      Unfortunately I couldn't find any info on the card's model.  
       
      Does anyone have experience with Hackintoshing on non-standard audio configurations like this?
       
       
×