Jump to content

1,355 posts in this topic

Recommended Posts

Advertisement

So this behavior is right on hacks? On linux the fan rotates fixed ...

 

Also depends on driver. It is possible that Linux driver does not have a fan stop. Try to run benchmark. If fan spins up everything is fine. 

Share this post


Link to post
Share on other sites

Well. As i told you before it depends on driver, VideoBIOS, card vendor...

Thanks very kind
 
Thanks very kind
 
Thanks very kind
 

Thanks  very kind

Share this post


Link to post
Share on other sites

I have a XFX R9 280X on 10.12.6 which I bought because was supposed to be OTB compatible but sadly wasn't to be. I used WhateverGreen to fix wake black screen (I also needed OSX-USB-SSDT to fix crash on sleep), missing GPU die temp in HWMonitor, and DisplayPort audio. I think the GPU fans are quieter too but not sure. And vandroiy added the device ID in less than a day so about Mac even shows the correct label. Very happy thanks! 

Share this post


Link to post
Share on other sites

Working great with my Fury X.  Booting is fast and sleep works.  About this Mac shows the GPU as an AMD Radeon Nano 4096 instead of an AMD Fury X 4096.  How do I fix this?

Share this post


Link to post
Share on other sites

Working great with my Fury X.  Booting is fast and sleep works.  About this Mac shows the GPU as an AMD Radeon Nano 4096 instead of an AMD Fury X 4096.  How do I fix this?

 

Provide screenshot DPCI Manager -> PCI List

Share this post


Link to post
Share on other sites

Usually on modern cards the fans should spin up under a heavy load. It is based on temperature. Try to run Unigine Benchmark it should spin up immediately after start. 

 

 

So this behavior is right on hacks? On linux the fan rotates fixed ...

 

 

OS Sierra and High Sierra have AutoWattMan in the drivers for temp control, they have worked well for Polaris cards.

post-1753549-0-92390100-1504296232_thumb.png

Share this post


Link to post
Share on other sites

OS Sierra and High Sierra have AutoWattMan in the drivers for temp control, they have worked well for Polaris cards.

 

So I wonder if we can play with autowattman to overclock the GPU? 

Share this post


Link to post
Share on other sites

OS Sierra and High Sierra have AutoWattMan in the drivers for temp control, they have worked well for Polaris cards.

Can you somehow disable it?

Share this post


Link to post
Share on other sites

Hi, I'm having issue with my XFX RX 580 p8dfd6 (Vendor 1002 / Device 67DF / Sub Vendor 1682 / Sub Device C580 with audio Vendor 1002 / Device AAF0 / Sub Vendor 1682 / Sub Device AAF0).

I had to add 0x67df1002 to 4100 and 9510 kexts and remove the value from 9500, and 9520. More details of the issue Here. Any suggestion ?

 

Screen_Shot_2017-09-02_at_4.32.30_PM.png

Share this post


Link to post
Share on other sites

Hi.

 

First of all: Thank you guys for this awesome support page. This community is really great.

 

Please excuse my stupid questions but I am a newbie in terms of the stuff discussed in this topic.

 

So my situation is the following:

 

I have an AMD R9 390x graphics card from Sapphire and until today I had iGPU configured as my primary GPU and had it connected to my second monitor. So I had one monitor connected to the R9 390x and one to the internal Intel HD graphics in order for the sleep/wake issue to be temporarily resolved. It worked.

 

Now recently I came across WhateverGreen and wanted to give it a try. I installed the kexts lilu and whatevergreen, changed the primary GPU to PCIe in the BIOS and connected the monitor I previously had connected to the internal graphics card to the R9 390x with an HDMI cable (The second one is already connected over Displayport).

 

Surprise, I have exactly the same issue as other people with the R9 390x in this topic: It boots until a certain point (which should be the point where whatevergreen is injected) and then results int a blackscreen (on both monitors). Removing the second monitor (HDMI one) makes the system bootable, but if I plug it in again once it has booted, the blackscreen comes back.

 

I tried to copy the SSDT from the OP and change the name to the name of my graphics card but it didn't work. Then I copied Jofkos SSDT example and gave it a try but it also didn't work.

 

My question is: What exactly do I have to change in these SSDTs? How can I actually understand what's going on there? What values should be inside this connectors section? And the most important part: How can I resolve this in order to work for my system without annoying you guys all the time?

 

Thank you again for this awesome support page.

Share this post


Link to post
Share on other sites

Hi.

 

First of all: Thank you guys for this awesome support page. This community is really great.

 

Please excuse my stupid questions but I am a newbie in terms of the stuff discussed in this topic.

 

So my situation is the following:

 

I have an AMD R9 390x graphics card from Sapphire and until today I had iGPU configured as my primary GPU and had it connected to my second monitor. So I had one monitor connected to the R9 390x and one to the internal Intel HD graphics in order for the sleep/wake issue to be temporarily resolved. It worked.

 

Now recently I came across WhateverGreen and wanted to give it a try. I installed the kexts lilu and whatevergreen, changed the primary GPU to PCIe in the BIOS and connected the monitor I previously had connected to the internal graphics card to the R9 390x with an HDMI cable (The second one is already connected over Displayport).

 

Surprise, I have exactly the same issue as other people with the R9 390x in this topic: It boots until a certain point (which should be the point where whatevergreen is injected) and then results int a blackscreen (on both monitors). Removing the second monitor (HDMI one) makes the system bootable, but if I plug it in again once it has booted, the blackscreen comes back.

 

I tried to copy the SSDT from the OP and change the name to the name of my graphics card but it didn't work. Then I copied Jofkos SSDT example and gave it a try but it also didn't work.

 

My question is: What exactly do I have to change in these SSDTs? How can I actually understand what's going on there? What values should be inside this connectors section? And the most important part: How can I resolve this in order to work for my system without annoying you guys all the time?

 

Thank you again for this awesome support page.

 

You need to set correct connector-priority 

Firs of all try 04060103

post-1069282-0-12505000-1504387331_thumb.png

Share this post


Link to post
Share on other sites

connector-priority 04060103 doesn't seem to work. Btw, how should my SSDT look like now? I have still Jofko's version...

 

I don't know who is Jofko and don't know his SSDT version... Everything you need is in FAQ. 290/390 cards have very specific VideoBIOS. The only way to get multimonitor working is to set connector priority or to inject custom connectors...

You can get debug info about your connectors (how to described in FAQ) and try to change connector priority. There will be only 16 options. Try to set up DP first...

Example in log:

Without any changes

2017-09-02 17:11:30.389062+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorsInfo found 4 connectors
2017-09-02 17:11:30.397727+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 0 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0000 txmit 12 enc 04 hotplug 02 sense 01
2017-09-02 17:11:30.397859+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 1 is type 00000800 (HDMI) flags 00000204 feat 0100 pri 0000 txmit 22 enc 05 hotplug 03 sense 03
2017-09-02 17:11:30.397994+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 2 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0000 txmit 01 enc 02 hotplug 01 sense 04
2017-09-02 17:11:30.398128+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 3 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0000 txmit 00 enc 00 hotplug 06 sense 06
2017-09-02 17:11:30.398265+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorsInfo attempting to autofix connectors
2017-09-02 17:11:30.398398+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnectors found txmit 12 enc 04 sense 01 for 0 connector
2017-09-02 17:11:30.398531+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnector use -raddvi to enable dvi autocorrection
2017-09-02 17:11:30.398666+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnectors found txmit 22 enc 05 sense 03 for 1 connector
2017-09-02 17:11:30.398801+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnector use -raddvi to enable dvi autocorrection
2017-09-02 17:11:30.406483+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnectors found txmit 11 enc 02 sense 04 for 2 connector
2017-09-02 17:11:30.406614+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnector use -raddvi to enable dvi autocorrection
2017-09-02 17:11:30.406750+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnectors found txmit 10 enc 00 sense 06 for 3 connector
2017-09-02 17:11:30.406884+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnector use -raddvi to enable dvi autocorrection
2017-09-02 17:11:30.407021+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorInfo leaving unchaged priority
2017-09-02 17:11:30.407153+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorsInfo resulting 4 connectors follow
2017-09-02 17:11:30.407290+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 0 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0000 txmit 12 enc 04 hotplug 02 sense 01
2017-09-02 17:11:30.414864+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 1 is type 00000800 (HDMI) flags 00000204 feat 0100 pri 0000 txmit 22 enc 05 hotplug 03 sense 03
2017-09-02 17:11:30.414997+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 2 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0000 txmit 01 enc 02 hotplug 01 sense 04
2017-09-02 17:11:30.415131+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 3 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0000 txmit 00 enc 00 hotplug 06 sense 06
2017-09-02 17:11:30.415272+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty caught model 19 (AMD Radeon HD 8xxx)
2017-09-02 17:11:30.415404+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData vendor-id has 1002 value
2017-09-02 17:11:30.415535+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData device-id has 67B0 value
2017-09-02 17:11:30.422989+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData revision-id has 0 value
2017-09-02 17:11:30.423120+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData subsystem-vendor-id has 1787 value
2017-09-02 17:11:30.423255+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData subsystem-id has 2342 value
2017-09-02 17:11:30.423389+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty autodetect found for 1002:67B0:0000 1787:2342
2017-09-02 17:11:30.423523+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty autodetect found AMD Radeon R9 290X

With connector priority set to 04060103

2017-09-02 17:31:52.195088+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorsInfo found 4 connectors
2017-09-02 17:31:52.195204+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 0 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0000 txmit 12 enc 04 hotplug 02 sense 01
2017-09-02 17:31:52.195342+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 1 is type 00000800 (HDMI) flags 00000204 feat 0100 pri 0000 txmit 22 enc 05 hotplug 03 sense 03
2017-09-02 17:31:52.195481+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 2 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0000 txmit 01 enc 02 hotplug 01 sense 04
2017-09-02 17:31:52.203022+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 3 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0000 txmit 00 enc 00 hotplug 06 sense 06
2017-09-02 17:31:52.203160+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorsInfo attempting to autofix connectors
2017-09-02 17:31:52.203294+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnectors found txmit 12 enc 04 sense 01 for 0 connector
2017-09-02 17:31:52.203429+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnector use -raddvi to enable dvi autocorrection
2017-09-02 17:31:52.203567+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnectors found txmit 22 enc 05 sense 03 for 1 connector
2017-09-02 17:31:52.219548+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnector use -raddvi to enable dvi autocorrection
2017-09-02 17:31:52.219686+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnectors found txmit 11 enc 02 sense 04 for 2 connector
2017-09-02 17:31:52.219821+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnector use -raddvi to enable dvi autocorrection
2017-09-02 17:31:52.219959+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnectors found txmit 10 enc 00 sense 06 for 3 connector
2017-09-02 17:31:52.234494+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnector use -raddvi to enable dvi autocorrection
2017-09-02 17:31:52.398461+0300  localhost kernel[0]: (kernel) Lilu: (DEBUG) patcher @ invoked at kext loading/unloading
2017-09-02 17:31:52.398645+0300  localhost kernel[0]: (kernel) Lilu: (DEBUG) patcher @ last kext is <private> and its name is com.apple.kext.triggers
2017-09-02 17:31:52.399257+0300  localhost kernel[0]: (kernel) Lilu: (DEBUG) patcher @ invoked at kext loading/unloading
2017-09-02 17:31:52.399316+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorInfo found 4 senses in connector-priority
2017-09-02 17:31:52.407709+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 04 to 1 by sense
2017-09-02 17:31:52.407720+0300  localhost kernel[0]: (kernel) Lilu: (DEBUG) patcher @ last kext is <private> and its name is com.apple.filesystems.autofs
2017-09-02 17:31:52.407835+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 06 to 2 by sense
2017-09-02 17:31:52.407977+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 01 to 3 by sense
2017-09-02 17:31:52.408112+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 03 to 4 by sense
2017-09-02 17:31:52.408246+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorsInfo resulting 4 connectors follow
2017-09-02 17:31:52.415385+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 0 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0003 txmit 12 enc 04 hotplug 02 sense 01
2017-09-02 17:31:52.415517+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 1 is type 00000800 (HDMI) flags 00000204 feat 0100 pri 0004 txmit 22 enc 05 hotplug 03 sense 03
2017-09-02 17:31:52.415650+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 2 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0001 txmit 01 enc 02 hotplug 01 sense 04
2017-09-02 17:31:52.422756+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 3 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0002 txmit 00 enc 00 hotplug 06 sense 06
2017-09-02 17:31:52.422886+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty caught model 19 (AMD Radeon HD 8xxx)
2017-09-02 17:31:52.423020+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData vendor-id has 1002 value
2017-09-02 17:31:52.423154+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData device-id has 67B0 value
2017-09-02 17:31:52.423293+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData revision-id has 0 value
2017-09-02 17:31:52.423430+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData subsystem-vendor-id has 1787 value
2017-09-02 17:31:52.423566+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData subsystem-id has 2342 value
2017-09-02 17:31:52.423704+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty autodetect found for 1002:67B0:0000 1787:2342
2017-09-02 17:31:52.423836+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty autodetect found AMD Radeon R9 290X

Share this post


Link to post
Share on other sites

 

I don't know who is Jofko and don't know his SSDT version... Everything you need is in FAQ. 290/390 cards have very specific VideoBIOS. The only way to get multimonitor working is to set connector priority or to inject custom connectors...

You can get debug info about your connectors (how to described in FAQ) and try to change connector priority. There will be only 16 options. Try to set up DP first...

Example in log:

Without any changes

2017-09-02 17:11:30.389062+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorsInfo found 4 connectors
2017-09-02 17:11:30.397727+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 0 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0000 txmit 12 enc 04 hotplug 02 sense 01
2017-09-02 17:11:30.397859+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 1 is type 00000800 (HDMI) flags 00000204 feat 0100 pri 0000 txmit 22 enc 05 hotplug 03 sense 03
2017-09-02 17:11:30.397994+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 2 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0000 txmit 01 enc 02 hotplug 01 sense 04
2017-09-02 17:11:30.398128+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 3 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0000 txmit 00 enc 00 hotplug 06 sense 06
2017-09-02 17:11:30.398265+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorsInfo attempting to autofix connectors
2017-09-02 17:11:30.398398+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnectors found txmit 12 enc 04 sense 01 for 0 connector
2017-09-02 17:11:30.398531+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnector use -raddvi to enable dvi autocorrection
2017-09-02 17:11:30.398666+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnectors found txmit 22 enc 05 sense 03 for 1 connector
2017-09-02 17:11:30.398801+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnector use -raddvi to enable dvi autocorrection
2017-09-02 17:11:30.406483+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnectors found txmit 11 enc 02 sense 04 for 2 connector
2017-09-02 17:11:30.406614+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnector use -raddvi to enable dvi autocorrection
2017-09-02 17:11:30.406750+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnectors found txmit 10 enc 00 sense 06 for 3 connector
2017-09-02 17:11:30.406884+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnector use -raddvi to enable dvi autocorrection
2017-09-02 17:11:30.407021+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorInfo leaving unchaged priority
2017-09-02 17:11:30.407153+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorsInfo resulting 4 connectors follow
2017-09-02 17:11:30.407290+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 0 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0000 txmit 12 enc 04 hotplug 02 sense 01
2017-09-02 17:11:30.414864+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 1 is type 00000800 (HDMI) flags 00000204 feat 0100 pri 0000 txmit 22 enc 05 hotplug 03 sense 03
2017-09-02 17:11:30.414997+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 2 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0000 txmit 01 enc 02 hotplug 01 sense 04
2017-09-02 17:11:30.415131+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 3 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0000 txmit 00 enc 00 hotplug 06 sense 06
2017-09-02 17:11:30.415272+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty caught model 19 (AMD Radeon HD 8xxx)
2017-09-02 17:11:30.415404+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData vendor-id has 1002 value
2017-09-02 17:11:30.415535+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData device-id has 67B0 value
2017-09-02 17:11:30.422989+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData revision-id has 0 value
2017-09-02 17:11:30.423120+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData subsystem-vendor-id has 1787 value
2017-09-02 17:11:30.423255+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData subsystem-id has 2342 value
2017-09-02 17:11:30.423389+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty autodetect found for 1002:67B0:0000 1787:2342
2017-09-02 17:11:30.423523+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty autodetect found AMD Radeon R9 290X

With connector priority set to 04060103

2017-09-02 17:31:52.195088+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorsInfo found 4 connectors
2017-09-02 17:31:52.195204+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 0 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0000 txmit 12 enc 04 hotplug 02 sense 01
2017-09-02 17:31:52.195342+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 1 is type 00000800 (HDMI) flags 00000204 feat 0100 pri 0000 txmit 22 enc 05 hotplug 03 sense 03
2017-09-02 17:31:52.195481+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 2 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0000 txmit 01 enc 02 hotplug 01 sense 04
2017-09-02 17:31:52.203022+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 3 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0000 txmit 00 enc 00 hotplug 06 sense 06
2017-09-02 17:31:52.203160+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorsInfo attempting to autofix connectors
2017-09-02 17:31:52.203294+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnectors found txmit 12 enc 04 sense 01 for 0 connector
2017-09-02 17:31:52.203429+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnector use -raddvi to enable dvi autocorrection
2017-09-02 17:31:52.203567+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnectors found txmit 22 enc 05 sense 03 for 1 connector
2017-09-02 17:31:52.219548+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnector use -raddvi to enable dvi autocorrection
2017-09-02 17:31:52.219686+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnectors found txmit 11 enc 02 sense 04 for 2 connector
2017-09-02 17:31:52.219821+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnector use -raddvi to enable dvi autocorrection
2017-09-02 17:31:52.219959+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnectors found txmit 10 enc 00 sense 06 for 3 connector
2017-09-02 17:31:52.234494+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ autocorrectConnector use -raddvi to enable dvi autocorrection
2017-09-02 17:31:52.398461+0300  localhost kernel[0]: (kernel) Lilu: (DEBUG) patcher @ invoked at kext loading/unloading
2017-09-02 17:31:52.398645+0300  localhost kernel[0]: (kernel) Lilu: (DEBUG) patcher @ last kext is <private> and its name is com.apple.kext.triggers
2017-09-02 17:31:52.399257+0300  localhost kernel[0]: (kernel) Lilu: (DEBUG) patcher @ invoked at kext loading/unloading
2017-09-02 17:31:52.399316+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorInfo found 4 senses in connector-priority
2017-09-02 17:31:52.407709+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 04 to 1 by sense
2017-09-02 17:31:52.407720+0300  localhost kernel[0]: (kernel) Lilu: (DEBUG) patcher @ last kext is <private> and its name is com.apple.filesystems.autofs
2017-09-02 17:31:52.407835+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 06 to 2 by sense
2017-09-02 17:31:52.407977+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 01 to 3 by sense
2017-09-02 17:31:52.408112+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ reprioritiseConnectors setting priority of sense 03 to 4 by sense
2017-09-02 17:31:52.408246+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ getConnectorsInfo resulting 4 connectors follow
2017-09-02 17:31:52.415385+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 0 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0003 txmit 12 enc 04 hotplug 02 sense 01
2017-09-02 17:31:52.415517+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 1 is type 00000800 (HDMI) flags 00000204 feat 0100 pri 0004 txmit 22 enc 05 hotplug 03 sense 03
2017-09-02 17:31:52.415650+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 2 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0001 txmit 01 enc 02 hotplug 01 sense 04
2017-09-02 17:31:52.422756+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) con @ 3 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0002 txmit 00 enc 00 hotplug 06 sense 06
2017-09-02 17:31:52.422886+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty caught model 19 (AMD Radeon HD 8xxx)
2017-09-02 17:31:52.423020+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData vendor-id has 1002 value
2017-09-02 17:31:52.423154+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData device-id has 67B0 value
2017-09-02 17:31:52.423293+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData revision-id has 0 value
2017-09-02 17:31:52.423430+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData subsystem-vendor-id has 1787 value
2017-09-02 17:31:52.423566+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) iokit @ getOSData subsystem-id has 2342 value
2017-09-02 17:31:52.423704+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty autodetect found for 1002:67B0:0000 1787:2342
2017-09-02 17:31:52.423836+0300  localhost kernel[0]: (kernel) WhateverGreen: (DEBUG) rad @ SetProperty autodetect found AMD Radeon R9 290X

Ok thank you. I think I understand it now and I already generated this log. Mine looks like your first version, logically. But I have one more question. Where do I get these 16 different priorities from, which I have to test? I can't see them in the logs...

Share this post


Link to post
Share on other sites

Ok thank you. I think I understand it now and I already generated this log. Mine looks like your first version, logically. But I have one more question. Where do I get these 16 different priorities from, which I have to test? I can't see them in the logs...

 

 

04 06 01 03 is connectors Sense ID. You can determine connector priority by swaping sense ID. 04 - DVI, 06 - DVI, 01 - DP, 03 - HDMI. So your priority is DVI, DVI, DP, HDMI. You can swap it. 

 

Example:

Be default you have this connectors: 

con @ 0 is type 00000400 (DP  ).   flags 00000304 feat 0100 pri 0000 txmit 12 enc 04 hotplug 02 sense 01

con @ 1 is type 00000800 (HDMI)  flags 00000204 feat 0100 pri 0000 txmit 22 enc 05 hotplug 03 sense 03
con @ 2 is type 00000004 (DVI )    flags 00000004 feat 0100 pri 0000 txmit 01 enc 02 hotplug 01 sense 04
con @ 3 is type 00000004 (DVI )    flags 00000004 feat 0100 pri 0000 txmit 00 enc 00 hotplug 06 sense 06
 
pri=0000 for ALL 4 connetors (priority). Without specific priority. DP, HDMI, DVI, DVI
 
After Applying connector priority 04 06 01 03
 
rad @ getConnectorInfo found 4 senses in connector-priority
rad @ reprioritiseConnectors setting priority of sense 04 to 1 by sense
rad @ reprioritiseConnectors setting priority of sense 06 to 2 by sense
rad @ reprioritiseConnectors setting priority of sense 01 to 3 by sense
rad @ reprioritiseConnectors setting priority of sense 03 to 4 by sense
rad @ getConnectorsInfo resulting 4 connectors follow
con @ 0 is type 00000400 (DP  ).  flags 00000304 feat 0100 pri 0003 txmit 12 enc 04 hotplug 02 sense 01
con @ 1 is type 00000800 (HDMI) flags 00000204 feat 0100 pri 0004 txmit 22 enc 05 hotplug 03 sense 03
con @ 2 is type 00000004 (DVI ).  flags 00000004 feat 0100 pri 0001 txmit 01 enc 02 hotplug 01 sense 04
con @ 3 is type 00000004 (DVI ).  flags 00000004 feat 0100 pri 0002 txmit 00 enc 00 hotplug 06 sense 06
 

You can see that pri (priority) is changed. 04=1, 06=2, 01=3, 03=4. This is your order - 04060103 DVI, DVI, HDMI, DP

 

Now you have to try all 16 combinations

04060103

06040103

04060301

etc...

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By tlefko
      Site
      checkout our official site! https://twortech.wixsite.com/pcmac Version Info
      This build is compatible up to Big Sur Beta
      Now Compatible with macOS 11 Please leave feedback with issues or w/o Comitted to Updating up to OS 11 Latest Release Notes
      Fixed Bluetooth and Wifi Stability Issues Improved Preformance and Power Managements Can Provide Files for Display Overrides Additional Patches for 4K Display updated for Big Sur if using unsupported wifi card disable it in bios use config.plist FIXED SLEEP WAKE BUG Exact same functionality as Catalina What Works / Does Not
      Everything works minus in-built mic Some displays may be detected as 40hz (working on fix) Notes
      Never tested USB C over Display Output, everything else works flawlessly USB devices eject on sleep (not really an issue) POST
      run sudo pmset -a hibernatemode 0 If no mouse, install all voodoo kexts using Kext Utility Description
      This esentially an ultra-simplistic version that is stable without the use of a deploy or complicated file installations and copies. You can easily view all the SSDT patches along with configuration files for the bootloader as they are all documented clearly in the files. This does include a copy of Clover, which of course I do not contribute to and am only responsible for the provided files, patches, and kext placements This guide provides a working setup with little knowledge of the topic and without "optimization" (because often they can break things). But, it is fully functional and preforms properly and is stable Make sure you are using DW1560 for wifi or else KP. If not using remove BRCM kexts from CLOVER>kexts>other. BIOS Setup
      Disable Secure Boot INSTALL (VERY IMPORTANT)
      Due to structural changes in the setup of apple's Big sur, this EFI cannot boot the installer it can only boot into a system / device that has already been created and setup. To do this, you need to install Big Sur to a virtual machine (lots of guides online) and then create an dmg of that system, and restore it onto your HDD using the 'dd' command There are various guides online how to get this virtual machine setup complete. You can then use the attached EFI folder to boot and use macOS big Sur You can use this video to show you how to get your macOS pre-installed onto your hard drive https://www.youtube.com/watch?v=HMU3nhcbWHw Boot Entry Setup
      Due to the fact this BIOS is locked down pretty heavily, reccomended to use Windows to find a free tool to add UEFI boot entries Messages and Facetime
      Gnerate your own Serials, Board Numbers, MLB There are various guides online to do this and as default they're set to essentially Null (Fakeserial) This is fairly straightforward and there is lots of external recourses, or you can contact me for support. Headphones and Audio
      All audio from speakers should work perfectly along with Bluetooth and USB audio no internal mic Credits
      MaLd0n for DSDT Patches (HUGE SHOUTOUT) Original Kext Authors Clover Team Finished!
      Congratulations, there really aren't any more steps that are required. Feel free to contact me with any questions. Donations
      Send me a coffee/beer lefkotyler@gmail.com  
       
      *check GitHub for latest releases and faster support https://github.com/tlefko/HP-Envy-13-Big-Sur
      EFI.zip
    • By chris1111
      Here my theme of OC 
      Resources.zip

       
      Resource with new Tool icon
      Resources-New Tool icon.zip
       
      Black version Update sector 30
      Black version Selector30.zip
       
      Change the selector in the simple theme 
      thanks @blackosx
      Selector 10
      Resources Slector10.zip
      Selector 40
      Resources Slector40.zip
      Resource 10 with new tool icon
      Resources Slector10 new tool.zip
       
       
       
       
    • By tonyx86
      **********************************************************************************
      In this thread, I have fully documented the installation of macOS Catalina on my HP EliteDesk 800 G4 Mini. It is a PERFECT HackMini8,1 and is running very well for me without any issues. I hope this documentation helps you to install macOS on your hack. Please leave feedback if you think there is anything I can improve and let me know if you have any questions.
      **********************************************************************************
       
      Background
      This is my first "modern" hack supporting UEFI and my first hack using Clover "on-the-fly" patches.  My previous hacks
      Laptop: Thinkpad T61 / Nvidia NVS 140m Laptop: Dell Latitude E6410 / Nvidia G3100m Desktop: Gigabyte G31 / GeForce 9600 Desktop: Biostar TH55HD / Sapphire Pulse RX580 (Google "Catalina Biostar TH55HD" and look for user name deeveedee)  
      are all perfectly running Catalina and I patched them all "manually" - all DSDT patches applied with MaciSL with virtually no Clover on-the-fly patching and all booted Legacy Clover.  This UEFI hack was MUCH easier and took about 20 hours vs. a combined hundreds of hours for the old hacks.  I wanted a hack that was a little more future proof and I think this is it.  I hope you enjoy this as much as I am enjoying it.  It is a perfect MacMini8,1.
       

       
      My system specs
      HP EliteDesk 800 G4 Mini (I7-8700T / UHD 630 / Q370 Chipset / 32GB DDR4 RAM) 3 x DP Ports (connected to monitors using DP -> DVI adapters) 6 x USB 3.1 1 x USB Type-C 3.1 2 x NVMe SSD (M.2 PCIe x4 2280/2230 combo ports) 1 x SATA6 SSD 1 x Intel Ethernet RJ-45 Conexant CX20632 Audio Codec Unsupported M.2 PCIe x1 2230 Intel Wi-Fi.  A possible solution is here, but I am NOT offering any support for this.  
      macOS Installation 
      Important: You MUST BE LOGGED-IN to download attachments from this forum
      See macOS installation steps here See Known Issues here for additional installation steps that may not yet be included in my attached config files See CLOVER (UEFI) installation later in this first post
      See BIOS configuration in attached BIOS configuration PDF document
      See EFI and /L/E kexts in attached EliteDesk.zip archive See how I developed my installation methodology here See references here See instructions here for installing two M.2 2280 NVMe SSDs and one SATA HD / SSD  
      What is not working
      Microphone port  
      What is not tested
      USB c 3.1 port (I have partially tested the USB 3 functionality of the port and it seems to be working fine with the SSDT-UIAC.aml in the attached EliteDesk800.zip archive) Wi-Fi / Bluetooth (intentional since I have not yet replaced my Intel card). A possible solution is here, but I am not offering any support for this.
       
      What is working
      Everything not mentioned above Sleep / Wake Multiple displays with IGPU graphics acceleration, hot pluggable display ports and DP->DVI adapters USB 3.1 ports Audio (internal speaker and headphone jack) Ethernet Auto-sensing headphone jack automatically switches to internal speaker when headphones removed  
      Known Issues and their solutions - see here
       
      BIOS Version / Configuration
      Version: 02.11.01 Rev.A See attached BIOS configuration in PDF document "HP EliteDesk 800 G4 Mini BIOS Configuration.pdf" Intel ME must be enabled for proper sleep / wake of UHD 630
       
      Clover Configuration
      Clover for UEFI booting only Install Clover in the ESP UEFI Drivers Recommended drivers DataHubDxe FSInject SMCHelper File System drivers ApfsDriverLoader VBoxHfs Memory fix drivers AptioMemoryFix Additional drivers NvmExpressDxe Install RC scripts on target volume Themes Choose your desired theme Install Clover Preference Pane (option not available when installing on USB thumb drive)  
      UHD 630 Framebuffer Patching
      See here and here to understand my graphics properties for use with WhateverGreen.kext Read this to see my attempt at graphics patching without WhateverGreen.kext (WEG) to get a better understanding of what WEG is doing
       
      Current Versions
      Catalina 10.15.6 Clover (UEFI) r5119 Lilu.kext 1.4.5 WhateverGreen.kext 1.4.0 AppleALC.kext 1.5.0 IntelMausi 1.0.3 (Not IntelMausiEthernet)  
      Credits To be provided
       
      ScreenShots
       
       
      HP EliteDesk 800 G4 Mini BIOS Configuration.pdf
       
      EliteDesk800 G4 Mini - Rev 1.0.zip
    • By PropoFlexWX4
      This new case will be arriving for me tomorrow.
       
      It's the model M25-W White Version.
       
       
      It has an integrated 7.1 sound card.
      Which means the machine will effectively have 2 sound cards...
       
      Unfortunately I couldn't find any info on the card's model.  
       
      Does anyone have experience with Hackintoshing on non-standard audio configurations like this?
       
       
    • By fantomas
      macOS Catalina 10.15.6 (19G73)
       
      Update
      Combo
×