Jump to content
WarDoc

WhatEverGreen Support Topic

1,000 posts in this topic

Recommended Posts

On 8/9/2017 at 7:44 AM, MacNB said:

 

After downloading, you have to rename the file by removing .txt extension. That is, rename it to SSDT-290X.aml.

You can then open it with the dsdt editor.

@e14883362 You have marked my reply from over a year ago as "confused". What are you confused about ?

Share this post


Link to post
Share on other sites
Advertisement
47 minutes ago, MacNB said:

@e14883362 You have marked my reply from over a year ago as "confused". What are you confused about ?

Sorry, I just think this icon is very funny and accidentally clicked into it.

Share this post


Link to post
Share on other sites

I'm on 10.13.6 on MacPro5.1 SYMBIOS.

 

1. to get sound working on NvidiaGraphicsFixup, I only need Lilu+NvidiaGraphicsFixup. When using WhateverGreen, I need Lilu+WhateverGreen+AppleALC. Is this normal?

 

2. Is it possible to change the "GFX" assigned to the video card? it's originally S3F0. With WhateverGreen, it shows up as GFX0. Can I change it to GFX2?

 

Thanks a lot!

Share this post


Link to post
Share on other sites
7 minutes ago, mrjayviper said:

I'm on 10.13.6 on MacPro5.1 SYMBIOS.

 

1. to get sound working on NvidiaGraphicsFixup, I only need Lilu+NvidiaGraphicsFixup. When using WhateverGreen, I need Lilu+WhateverGreen+AppleALC. Is this normal?

 

2. Is it possible to change the "GFX" assigned to the video card? it's originally S3F0. With WhateverGreen, it shows up as GFX0. Can I change it to GFX2?

 

Thanks a lot!

 

Just try to change S3F0 to GFX2 to your DSDT / SSDT

 

 

Edited by Andres ZeroCross

Share this post


Link to post
Share on other sites

@vit9696 I keep noticing a WEG suggestion in verbose mode saying WEG IMEI device found is 0x1D3B and should change it to 0x1E3A, looked through your source code and found the section where it identifies the IMEI or BUS device and suggest this on Sandy Bridge or Ivy Bridge CPUs. Mind clarifying if I should change the device-id for my IMEI or BUS device?

Share this post


Link to post
Share on other sites
6 hours ago, Pavo said:

@vit9696 I keep noticing a WEG suggestion in verbose mode saying WEG IMEI device found is 0x1D3B and should change it to 0x1E3A, looked through your source code and found the section where it identifies the IMEI or BUS device and suggest this on Sandy Bridge or Ivy Bridge CPUs. Mind clarifying if I should change the device-id for my IMEI or BUS device?

@Pavo there is need to apply Rename HECI to IMEI in clover dsdt patch?

Share this post


Link to post
Share on other sites

whatevergreen can boot my hd630 w/o -disablegfxfirmware flag in HighSierra. but i need to manually add it again after i updated to Security Update 2018-002.

can this be fix?

Edited by ellaosx

Share this post


Link to post
Share on other sites
19 hours ago, Pavo said:

@vit9696 I keep noticing a WEG suggestion in verbose mode saying WEG IMEI device found is 0x1D3B and should change it to 0x1E3A, looked through your source code and found the section where it identifies the IMEI or BUS device and suggest this on Sandy Bridge or Ivy Bridge CPUs. Mind clarifying if I should change the device-id for my IMEI or BUS device?

IMEI, information about it should be present on the net.

 

@ellaosx will need logs here via liludump=60 in -liludbgall mode from /var/log/Lilu_.... file.

Edited by vit9696

Share this post


Link to post
Share on other sites

Hello,

 

Installed Mojave on Gigabyte Z97X UD3H, Samsung EVO 860, EVGA GT740. The GPU is native to Mojave but adding latest Lilu and Whatevergreen (in L/E or Clover/Kexts/Other, no difference), I'm unable to play iTunes movies... The two kexts are charged when I look in IORegistryExplorer. Clover is revision 4722 BTW. Tried to update to 10.14.1 without improvements. A problem maybe with native Kepler cards and Lilu/Whatevergreen?

 

I've tried an RX560 two weeks ago (returned it because of a weird white flash on the Apple bootscreen) and this one didn't need Lilu or WEG...

 

Going back to Sierra with my GTX950 but I'll investigate further next week-end with an external USB drive first.

 

Thanks,

 

Patrice

Edited by brousseau6933

Share this post


Link to post
Share on other sites
16 minutes ago, brousseau6933 said:

I've tried an RX560 two weeks ago (returned it because of a weird white flash on the Apple bootscreen) and this one didn't need Lilu or WEG...

The white flash is normal for RX 4xx/5xx GPUs on hacks.

Share this post


Link to post
Share on other sites
13 minutes ago, Pavo said:

The white flash is normal for RX 4xx/5xx GPUs on hacks.

Well, should had kept the RX560...:( Forgot to add that I use iMac 14,2 SMBIOS.

 

So, no clues anybody why Kepler even if native doesn't work with iTunes/Lilu/WEG?

 

I'll try with the Intel IGPU once I'll setup my external Mojave USB test disk.

 

Thanks again,

 

Patrice

Edited by brousseau6933

Share this post


Link to post
Share on other sites

Someone suggested in a French forum to set up the Intel IGPU. Does it mean I have to activate it in the BIOS (but let the GT 740 as first display) and inject it via Clover with correct ID?

 

Thanks,

 

Patrice

Share this post


Link to post
Share on other sites

Well, I'm at lost: on my second hack (i7 4770, GT 710, SMBIOS iMac 14,1 - Dell Optiplex 9020) Lilu and Whatevergreen in Clover/Kexts/Other with the GT 710... everything is fine playing DRM iTunes movies. The only differences vs the other hack (4790, GT 740) is the SMBIOS (iMac 14,1) and the DSDT (got it last year for the Dell at OSXLatitude) :

  Device (IGPU)
            {
                Name (_ADR, 0x00020000)  // _ADR: Address
                Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
                {
                    If (LEqual (Arg2, Zero))
                    {
                        Return (Buffer (One)
                        {
                             0x03                                           
                        })
                    }

                    Return (Package (0x04)
                    {
                        "AAPL,ig-platform-id",
                        Buffer (0x04)
                        {
                             0x03, 0x00, 0x22, 0x0D                        
                        },

                        "hda-gfx",
                        Buffer (0x0A)
                        {
                            "onboard-1"
                        }
                    })
                }
            }

and also:

               Device (GFX0)
                {
                    Name (_ADR, Zero)  // _ADR: Address
                    Name (_SUN, One)  // _SUN: Slot User Number
                    Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
                    {
                        If (LEqual (Arg2, Zero))
                        {
                            Return (Buffer (One)
                            {
                                 0x03                                           
                            })
                        }

                        Return (Package (0x0E)
                        {
                            "@0,connector-type",
                            Buffer (0x04)
                            {
                                 0x00, 0x08, 0x00, 0x00                        
                            },

                            "@1,connector-type",
                            Buffer (0x04)
                            {
                                 0x00, 0x08, 0x00, 0x00                        
                            },

                            "@2,connector-type",
                            Buffer (0x04)
                            {
                                 0x00, 0x08, 0x00, 0x00                        
                            },

                            "@3,connector-type",
                            Buffer (0x04)
                            {
                                 0x00, 0x08, 0x00, 0x00                        
                            },

                            "@4,connector-type",
                            Buffer (0x04)
                            {
                                 0x00, 0x08, 0x00, 0x00                        
                            },

                            "@5,connector-type",
                            Buffer (0x04)
                            {
                                 0x00, 0x08, 0x00, 0x00                        
                            },

                            "hda-gfx",
                            Buffer (0x0A)
                            {
                                "onboard-2"
                            }
                        })
                    }
                }

Maybe the fact that the NVidia GT 710 appears as "onboard", which is not the case on my i7 4790 (no DSDT at all)?

Share this post


Link to post
Share on other sites

I‘m using desktop HD4600 with lilu whatevergreen , smbios iMac 14,2 .

The external display shown as built-in display.

I can't use  "Brightness.Menulet" "MonitorControl" to control display brightness.

but I use "Monitorian" on windows it works well (Confirmed support for DDC/CI)

Do I need to modify the display to external or other methods?

Edited by bluemaP1E

Share this post


Link to post
Share on other sites
2 hours ago, bluemaP1E said:

I‘m using HD4600 with lilu whatevergreen , smbios 13,2 .

The external display shown as built-in display.

I can't use  "Brightness.Menulet" "MonitorControl" to control display brightness.

but I use "Monitorian" on windows it works well (Confirmed support for DDC/CI)

Do I need to modify the display to external or other methods?

 

Display external must be shown as External Display not Built-in Display

Share this post


Link to post
Share on other sites
On 10/25/2018 at 10:37 PM, buyjoey said:

Hi, anyone uses LG Ultrafine 5K Monitor with WEG? I am using GC-Alpine TH3 addin card for TH3 connected to my monitor. But when I use the Whatevergreen and Lilu (The latest versions) Display will be separated by two monitors. a Virtual 5K and another 2560x2880 (strange resolution) - I have to use another monitor as primary boot. If I use LG Ultrafine 5K as a primary monitor to boot, it shows me all black!! I am using a 4k monitor + LG 5k monitor.

 

LG Ultrafine 5K using TH3 connection by two dp1.2 ports to the Th3 is blackscreen on the boot with WEG + lilu. But it is working w/o WEG natively. Only the reason I want to use WEG is for iGPU. I want to use iGPU so I have to use WEG.

 

Is there anyway I can fix those two issues with WEG?

 

I am having the exact same problem on Mojave.

 

I got a GA-Z170x-Gaming 7

Titan Ridge

Vega64

Ultrafine 5k

 

Share this post


Link to post
Share on other sites

@vit9696 how to patch coredisplay for 4K Resolution with whatevergreen on IGPU?? Tried Lilu.kext + WhateverGreen (latest versions) with this scenario
1. boot with "-cdfon" = No result,, still stuck at IOLockscreenstate bla bla bla
2. Add properties to IGPU in Device - > Properties "enable-hdmi20", will same result too.
image.png.366dd0df73198aa0a19d400ee4f8759d.png

But if i use IntelGraphicsFixUp.kext,, then it will reach desktop screen

Edited by Andres ZeroCross

Share this post


Link to post
Share on other sites

Following about the GT740 and no DRM in iTunes:

 

I've bought an used RX 560 and it works without Lilu and Whatevergreen in 10.14.0... but it is broken in 10.14.1 and beta 3 of 10.14.2, with or without Lilu and WEG...

Share this post


Link to post
Share on other sites
31 minutes ago, vit9696 said:

@Andres ZeroCross, agdpmod… Readme is your friend.

Sorry for my understanding, agdpmod is abut External GPU Check,, I think it's solution for BlackScreen issue with Nvidia / AMD. So the old way is about patch AppleGraphicsDisplayPolicy.kext.

So the another function of agdpmod is for patch core display too and 4K Resolution of internal display???

Share this post


Link to post
Share on other sites
2 minutes ago, vit9696 said:

In different AGDP modes different resolutions may be supported. The fact that IGFX standalone without AGDP patches works fine is the key to the issue.


Ah ok,, so i need to try use "agdpmod=ignore"

Will test it and report, thanks before

Share this post


Link to post
Share on other sites

Hello,

 

First, thanks to the developper(s) of Lilu, Shiki, NvidiaGraphicsFixup, IntelGraphicsFixup and WEG. Without these, we couldn't be able to have functionnal Nvidia, Intel and AMD graphics on Hackintosh.

 

Now, here's my problem and I ask the developper of WEG about it, in case you could do something:

- Mojave 10.14.0, MSI Radeon RX560. No need for WEG as RX560 is supported OOB with the following: iTunes downloaded movies plays fine. As for encoding, I don't know 'cause I don't do any... In fact, if I inject WEG, iTunes crashes immediately... but I don't need it anyway! Lilu and WEG are loaded viewing IORegistryExplorer;

 

- Mojave 10.14.1, same card. iTunes DRM downloaded movies aren't playing anymore (black screen with play not moving). Only way to get previous behavior is to replace AppleGVA.framework in System/Library/PrivateFrameworks with the 10.14.0 version... Someone suggested another workaround, in form of an HEVC dummy kext but it doesn't help in my case. Thanks to this discussion here at InsanelyMac (Mojave 10.14.1 Breaks Radeon Hardware Decoding (no IGPU)): https://www.insanelymac.com/forum/topic/336278-mojave-10141-breaks-radeon-hardware-decoding-no-igpu/?tab=comments#comment-2651577

This time, Lilu and WEG injected (latest versions, 1.2.8 and 1.2.4) doesn't help. No more iTunes crash but no DRM neither! Lilu and WEG shown as loaded fine as per IORegistryExplorer.

 

 

So, as I do not like to use old kext or frameworks from previous OSX builds (I don't want to use the same framework for all the subsequent Mojave updates!!), I ask here if you could implement a way to maintain HEVC encoding and DRM encoding thru Lilu and WEG. BTW, tried 10.14.2 and it is still broken...

 

Here is the debug print of WEG 1.2.4 debug if it could help you:

 

Thanks,

 

Patrice

2018-12-04 13:05:14.684369-0500 0x73       Default     0x0                  0      0    kernel: (kernel) WhateverGreen:    init @ (DBG) WhateverGreen bootstrap DBG-124-2018-10-30
2018-12-04 13:05:14.687105-0500 0x73       Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) not enabling CAIL_DisableDrmdmaPowerGating

2018-12-04 13:05:14.697424-0500 0x73       Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) not enabling CAIL_DisableGfxCGPowerGating
2018-12-04 13:05:14.698842-0500 0x73       Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) not enabling CAIL_DisableUVDPowerGating
2018-12-04 13:05:14.700221-0500 0x73       Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) not enabling CAIL_DisableVCEPowerGating
2018-12-04 13:05:14.701599-0500 0x73       Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) not enabling CAIL_DisableDynamicGfxMGPowerGating
2018-12-04 13:05:14.703152-0500 0x73       Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) not enabling CAIL_DisableGmcPowerGating
2018-12-04 13:05:14.704530-0500 0x73       Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) not enabling CAIL_DisableAcpPowerGating
2018-12-04 13:05:14.705908-0500 0x73       Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) not enabling CAIL_DisableSAMUPowerGating
2018-12-04 13:05:14.707306-0500 0x73       Default     0x0                  0      0    kernel: (kernel) WhateverGreen:   shiki @ (DBG) will autodetect autodetect GPU 0 whitelist 0
2018-12-04 13:05:14.718787-0500 0x73       Default     0x0                  0      0    kernel: (kernel) WhateverGreen:   shiki @ (DBG) pre-config: online 0, bgra 0, compat 0, whitelist 0, id 0, stream 0

2018-12-04 13:05:17.221412-0500 0x1e9      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) non-apple-fw proceeding with devprops 1
2018-12-04 13:05:17.230735-0500 0x1e9      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:   iokit @ (DBG) getOSData device-id has 67FF value
2018-12-04 13:05:17.239886-0500 0x1e9      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:   iokit @ (DBG) getOSData revision-id has CF value
2018-12-04 13:05:17.249053-0500 0x1e9      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:   iokit @ (DBG) getOSData subsystem-vendor-id has 1462 value
2018-12-04 13:05:17.258399-0500 0x1e9      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:   iokit @ (DBG) getOSData subsystem-id has 8A91 value
2018-12-04 13:05:17.267692-0500 0x1e9      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) found existing built-in
2018-12-04 13:05:17.276761-0500 0x1e9      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) detecting policy
2018-12-04 13:05:17.285232-0500 0x1e9      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) board is Mac-27ADBB7B4CEE8E61
2018-12-04 13:05:17.293800-0500 0x1e9      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) disabling nvidia patches on model Mac-27ADBB7B4CEE8E61
2018-12-04 13:05:17.302851-0500 0x1e9      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) vinfo 1: 1080:1920 32:7680:1
2018-12-04 13:05:17.311232-0500 0x1e9      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) vinfo 2:  67:240 7680:1:0

2018-12-04 13:05:19.805949-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) starting controller

2018-12-04 13:05:19.810459-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) GetProperty discovered property merge request for aty_properties

2018-12-04 13:05:20.569066-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     con @ (DBG) 0 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0000 txmit 11 enc 02 hotplug 02 sense 01
2018-12-04 13:05:20.577614-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) translateAtomConnectorInfoV1 got sense id 01
2018-12-04 13:05:20.585217-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) translateAtomConnectorInfoV1 checking 2120 object id
2018-12-04 13:05:20.593033-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) autocorrectConnector use -raddvi to enable dvi autocorrection
2018-12-04 13:05:20.601093-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     con @ (DBG) 0 is type 00000800 (HDMI) flags 00000204 feat 0100 pri 0000 txmit 21 enc 03 hotplug 05 sense 04
2018-12-04 13:05:20.610008-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) translateAtomConnectorInfoV1 got sense id 04
2018-12-04 13:05:20.617887-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) translateAtomConnectorInfoV1 checking 2220 object id
2018-12-04 13:05:20.625901-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) autocorrectConnector use -raddvi to enable dvi autocorrection
2018-12-04 13:05:20.634123-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     con @ (DBG) 0 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0000 txmit 00 enc 00 hotplug 03 sense 05
2018-12-04 13:05:20.643079-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) translateAtomConnectorInfoV1 got sense id 05
2018-12-04 13:05:20.650986-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) translateAtomConnectorInfoV1 checking 211E object id
2018-12-04 13:05:20.658928-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) autocorrectConnector use -raddvi to enable dvi autocorrection
2018-12-04 13:05:20.667007-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) setting fb limit to 3
2018-12-04 13:05:20.674185-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) getConnectorInfo leaving unchaged priority
2018-12-04 13:05:20.681749-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) getConnectorsInfo resulting 3 connectors follow
2018-12-04 13:05:20.689314-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     con @ (DBG) 0 is type 00000400 (DP  ) flags 00000304 feat 0100 pri 0000 txmit 11 enc 02 hotplug 02 sense 01
2018-12-04 13:05:20.697897-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     con @ (DBG) 1 is type 00000800 (HDMI) flags 00000204 feat 0100 pri 0000 txmit 21 enc 03 hotplug 05 sense 04
2018-12-04 13:05:20.706297-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     con @ (DBG) 2 is type 00000004 (DVI ) flags 00000004 feat 0100 pri 0000 txmit 00 enc 00 hotplug 03 sense 05
2018-12-04 13:05:20.714537-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) SetProperty caught model 14 (Radeon RX 560)
2018-12-04 13:05:20.721784-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) SetProperty ignored setting model to Radeon RX 560

2018-12-04 13:05:20.748857-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) starting controller done 1
2018-12-04 13:05:20.755699-0500 0x5b3      Default     0x0                  0      0    kernel: (AMDSupport) Accelerator successfully registered with controller.
2018-12-04 13:05:20.756229-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) GetProperty got cail_properties 1, merging from GFX0
2018-12-04 13:05:20.763532-0500 0x5b3      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     rad @ (DBG) GetProperty discovered property merge request for cail_properties

2018-12-04 13:05:23.647767-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 1: 12288:1 0:0:32
2018-12-04 13:05:23.647770-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 2: 3:8 --------RRRRRRRRGGGGGGGGBBBBBBBB 350343339:0:0
2018-12-04 13:05:23.647773-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) this display has different mode
2018-12-04 13:05:23.647786-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 1: -5:1 8192:0:32
2018-12-04 13:05:23.647789-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 2: 3:8 --------RRRRRRRRGGGGGGGGBBBBBBBB 350343339:1920:1080
2018-12-04 13:05:23.647791-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) this display has different mode
2018-12-04 13:05:23.647797-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 1: 12288:1 0:0:32
2018-12-04 13:05:23.647800-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 2: 3:8 --------RRRRRRRRGGGGGGGGBBBBBBBB 350343339:0:0
2018-12-04 13:05:23.647802-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) this display has different mode
2018-12-04 13:05:23.682183-0500 0x5d5      Default     0x0                  0      0    kernel: kPEDisableScreen 1
2018-12-04 13:05:23.682474-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 1: -2147479552:1 8192:0:32
2018-12-04 13:05:23.682477-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 2: 3:8 --------RRRRRRRRGGGGGGGGBBBBBBBB 0:1920:1080
2018-12-04 13:05:23.682480-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) this display has different mode
2018-12-04 13:05:23.684266-0500 0x5d5      Default     0x0                  0      0    kernel: kPEEnableScreen 1
2018-12-04 13:05:23.693707-0500 0x5d5      Default     0x0                  0      0    kernel: kPEDisableScreen 1
2018-12-04 13:05:23.694026-0500 0x5d5      Default     0x0                  0      0    kernel: kPEEnableScreen 1
2018-12-04 13:05:23.754719-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 1: -2147479552:1 8192:0:32
2018-12-04 13:05:23.754723-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 2: 3:8 --------RRRRRRRRGGGGGGGGBBBBBBBB 0:1920:1080
2018-12-04 13:05:23.754730-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) this display has different mode
2018-12-04 13:05:23.754744-0500 0x5d5      Default     0x0                  0      0    kernel: kPEEnableScreen 1
2018-12-04 13:05:23.756225-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 1: -2147479552:1 8192:0:32
2018-12-04 13:05:23.756230-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 2: 3:8 --------RRRRRRRRGGGGGGGGBBBBBBBB 0:1920:1080
2018-12-04 13:05:23.756232-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) this display has different mode
2018-12-04 13:05:23.807024-0500 0x5d5      Default     0x0                  0      0    kernel: kPEDisableScreen 1
2018-12-04 13:05:23.807391-0500 0x5d5      Default     0x0                  0      0    kernel: kPEEnableScreen 1
2018-12-04 13:05:23.807631-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 1: -2147479552:1 7680:0:32
2018-12-04 13:05:23.807635-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 2: 3:8 --------RRRRRRRRGGGGGGGGBBBBBBBB 0:1920:1080
2018-12-04 13:05:23.807639-0500 0x5d5      Default     0x0                  0      0    kernel: kPEEnableScreen 1
2018-12-04 13:05:23.889958-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 1: -2147479552:2 7680:0:32
2018-12-04 13:05:23.889962-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 2: 3:10 --RRRRRRRRRRGGGGGGGGGGBBBBBBBBBB 0:1920:1080
2018-12-04 13:05:23.889967-0500 0x5d5      Default     0x0                  0      0    kernel: kPEEnableScreen 1
2018-12-04 13:05:23.892466-0500 0x5d5      Default     0x0                  0      0    kernel: kPEDisableScreen 1
2018-12-04 13:05:23.892648-0500 0x5d5      Default     0x0                  0      0    kernel: kPEEnableScreen 1

2018-12-04 13:05:45.031715-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 1: -2147479552:1 7680:0:32
2018-12-04 13:05:45.031722-0500 0x5d5      Default     0x0                  0      0    kernel: (kernel) WhateverGreen:     weg @ (DBG) fb info 2: 3:8 --------RRRRRRRRGGGGGGGGBBBBBBBB 0:1920:1080


 

Whatevergreen debug 2018-12-04.rtf

 

Edited by brousseau6933

Share this post


Link to post
Share on other sites

I get black screen after wake from Sleep in Mojave 10.14.2

My Specificaton
Processor : Intel i7 6700
IGPU : Intel HD 520 (use connector less framebuffer)
eGPU : Radeon RX580
Motherboard : Gigabyte Z170X Gaming 7
macOS Version : Mojave 10.14.2 Build 18C54

It wake from sleep with normal condition in previous mojave 10.14 and 10.14.1 include beta 10.14.2. But after update to public release 10.14.2 i get black screen after wake from sleep if i sleep for long time. If for short time, it wake normally from sleep.
I used Lilu.kext version 1.2.8 and WhateverGreen version 1.2.4 

Edited by Andres ZeroCross

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fantomas1
      First beta... macOS Catalina 10.15 beta (19A471t)  Release Notes!!!
       
      Useful information:
       
      macOSDeveloperBetaAccessUtility.dmg.zip (thanks to gengik84)
      Clover r4945 (thanks to Cyberdevs)
      Lilu_plugins (thanks to gengik84)
      Port Limit Patch (thanks to daliansky)
      older non metal nVidia and Intel cards (thanks to fusion71au))
    • By fusion71au
      Patch Catalina or Mojave macOS Installer App for Unsupported Machines
       
      Often for economic reasons, Apple prevents the Installer.app for its latest macOS from installing on older machines perfectly capable of running it eg macOS 10.14 Mojave on Unsupported Macs Thread.
       

       
      In Mojave 10.14, @ASentientBot posted a method to patch the distribution file in OSInstall.mpkg to enable the Mojave installer to install on unsupported machines (with or without graphics card metal support). 
       
      In Catalina 10.15beta, the above method no longer works since Apple is checking OSInstall.mpkg for its file signature and the mandatory requirement in Catalina to install to 2 separate apfs volumes necessitates using the original Catalina macOS Base System Installer.  Fortunately, it is still possible to substitute High Sierra’s Apple Signed OSInstall.mpkg inside the Catalina or Mojave InstallESD.dmg by making it R/W.
       
      The procedure below will allow Macs or Hacks able to install High Sierra to also install Catalina or Mojave (eg SMBIOS MacPro5,1, iMac11,3, MacBook Pro7,1 which have been unsupported in macOS 10.14.x and 10.15beta) -credit to @ASentientBot's post.
       
      Prerequisites
      1. Mac or Hack capable of and running High Sierra 10.13.x
      2. An original, untouched copy of OSInstall.mpkg from High Serra InstallESD.dmg - attached OSInstall_10.13.6.mpkg.zip save to your ~/Downloads folder
      3. macOS Installer App eg for Catalina beta or Mojave downloaded to /Applications
      4. Add NVRAM boot arg (or Clover config.plist boot arg on a hack) -no_compat_check to enable system to boot to final completed Mojave or Catalina install.
       
      Procedure
      1. Open Terminal and type the following
       
      open /Applications/Install*/Contents/SharedSupport/InstallESD.dmg (assuming the Catalina or Mojave Installer App is in /Applications)  
      2. Open Disk Utility, click File|New Image|Image from ‘InstallESD”
      3. Save as read/write image, no encryption in /Applications
      4. Unmount InstallESD in DU by clicking the "eject" icon next to it
       
       
      5. Open the R/W InstallSD.dmg in /Applications and replace Catalina’s/Mojave's OSInstall.mpkg with High Sierra’s version by typing in terminal
       
      open /Applications/InstallESD.dmg cp ~/Downloads/OSInstall_10.13.6.mpkg /Volumes/InstallESD/Packages/OSInstall.mpkg  
      6. Unmount InstallESD in DU by clicking the "eject" icon next to it
      7. Replace original Catalina/Mojave InstallESD.dmg with our patched one, making a backup of the original.  In terminal, type
       
      sudo mv /Applications/Install*/Contents/SharedSupport/InstallESD.dmg /Applications/InstallESD_orig.dmg sudo mv /Applications/InstallESD.dmg /Applications/Install*/Contents/SharedSupport/  
      8.  Test the newly patched installer!…

    • By ludufre
      Installing macOS Mojave 10.14.5 on Gigabyte Z370N WIFI + i7 8700K + UHD 630



      Changelog:
       
      06/10/2019 00:44h GMT-0
      - Completely rewritten.
       
      10/17/2018 08:12h GMT-0
      - Fix Kexts permissions commands adjusted.
      - Removed FrameBuffer patch that is not needed.
      - Added audio solution and HDMI.
      - Unfortunately DisplayPort does not work.
      - Replaced Wifi/BT with DW1560 (BCM94352Z)
       
      10/11/2018 04:15h GMT-0
      - Added USB 3.0 patch.
      - Adjusted some steps.
      - Changed text formatting.
       
      10/11/2018 03:42h GMT-0
      - Added missing UEFI configuration.
       
      10/07/2018 00:36h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i7-8700K ->  Work. All SpeedStep stages.
      - Video Card: Intel UHD 630 ->  Work. QE/CI and Metal.
      - Chipset: Intel Z370 ->  Work.
      - HDMI 2.0 (1st) ->  Work.
      - HDMI (2nd) ->  Work.
      - DP ->  Not tested yet.
      - Audio: ALC1220 ->  Work.
      - HDMI Audio ->  Work.
      - WiFi/Bluetooth ->  Not work. Replaced with BCM94360CS2.
      - Ethernet (1st) ->  Work.
      - Ethernet (2nd) ->  Work.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Todo
       
      - Make audio work.
      - Make HDMI audio work.
      - Test DisplayPort.
      - Make second ethernet work.
      - Replace Wifi/Bluetooth.
      - Test DP.
       
      What you need to install

      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Mojave install app
      - Clover Configurator
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ .app/Contents/Resources/createinstallmedia --volume /Volumes/Install--nointeraction This will take about 30 minutes.
       
       

      Install bootloader

      Download the CloverEFI (used 4953, from Automated Clover Builds) and install with this options on "Install macOS Mojave":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - ApfsDriverLoader-64
      - UEFI Drivers - AptioMemoryFix-64
      - UEFI Drivers - HFSPlus
      - UEFI Drivers - NvmExpressDxe-64 (I have an NVME SSD)
      - FileVault 2 UEFI Drivers (I strongly recommend enable FileVault)


       
       
      Make things works
       
      We'll make a full working flash drive, so follow these instructions:
       
      Will be mounted the EFI partition of the flash drive.
       
      Open the the /Volumes/EFI/CLOVER/config.plist inside this new partition with Clover Configurator (used 5.4.4.0)
       
      Important modifications
       
      config.plist

      BOOT Page
       
      - Add: Arguments - darkwake=2
      - Uncheck: NeverDoRecovery
      - Check: Legacy - XMPDetection=Yes
       
      KERNEL AND KEXT PATCHES Page
       
      - Check: KernelPm
       
      RT VARIABLES Page
       
      - Change: CsrActiveConfig - 0x3
       
      SMBIOS Page
       
      - Change: Macmini8,1 - Mac mini (Late 2018) | Intel Core i7-8700B @ 3.20 GHz

       
      - Click: Generate New (few times in the two buttons)

       
       
      Need some Kexts in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the HWSensors 3 from here. I used the FakeSMC.kext, ACPIMonitor.kext and IntelCPUMonitor.kext inside of DMG version r196.
      - Download the Lilu.kext from here. I used the version 1.3.6.

       
      Intel UHD 630
       
      ACPI Page
      - Uncheck: Fixes - AddHDMI
      - Uncheck: Fixes - FixDisplay
      - Uncheck: Fixes - FixHDA
       
      GUI Page
      - Change: Screen Resolution - 3840x2160 (My monitor is 4K)

      Need a Kext in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the WhateverGreen.kext from here. I used the version 1.2.9.

       
      Audio ALC 1220 and HDMI audio

      BOOT Page
      - Add: Arguments - alcid=11

      DEVICES Page
      - Change: Audio - Inject - 11
      - Uncheck: Audio - AFGLowPowerState
      - Uncheck: Audio - ResetHDA

      Need a Kext in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the AppleALC.kext from here. I used the version 1.3.8.

       
      All USBs (2.0, 3.0, Type-C, internal)
       
      KERNEL AND KEXT PATCHES Page - KextsToPatch
       
      - Name*: com.apple.iokit.IOUSBHostFamily
      - Find* [HEX]: 83FB0F0F
      - Replace* [HEX]: 83FB3F0F
      - Comment: USB Port Limit Patch 1 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      - Name*: com.apple.iokit.IOUSBHostFamily
      - Find* [HEX]: 83FB0F0F
      - Replace* [HEX]: 83FB3F0F
      - Comment: USB Port Limit Patch 2 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      - Name*: com.apple.driver.usb.AppleUSBXHCI
      - Find* [HEX]: 83FB0F0F
      - Replace* [HEX]: 83FB3F0F
      - Comment: USB Port Limit Patch 3 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      - Name*: com.apple.driver.usb.AppleUSBXHCI
      - Find* [HEX]: 83FF0F0F
      - Replace* [HEX]: 83FF3F0F
      - Comment: USB Port Limit Patch 4 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      Need a Kext in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the USBInjectAll.kext from here. I used the version 2018-1108.
       
      Need SSDT patch in the folder /EFI/CLOVER/ACPI/patched/
       
      - Download the SSDT-EC.aml, SSDT-UIAC.aml and SSDT-USBX attached bellow.
       
      Wifi and Bluetooth (BCM94360CS)
       
      Works out of box (plug 'n' play).
       
       
      LAN Cards
       
      Need a Kext for feach card in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the IntelMausiEthrenet.kext from here. I used the version 2018-1031.
      - Download the SmallTreeIntel82576.kext attached bellow. I do not remember where I found it.

       
      Now you can start the instalation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      - Shutdown and insert the flash.
      - Power on with DEL pressed to enter BIOS setup.
      - Change value: Periphelrals - Initial Display to IGP
      - Change value: Periphelrals - USB Configuration - XHCI Hand-off to ENABLE
      - Change value: Chipset - VT-d to DISABLE
      - Change value: Chipset - Internal Graphics to ENABLE
      - Change value: Chipset - DVMT Pre-Allocated to 128M
      - Save & Exit Setup
       
      - Now, hold the F12
      - In the list, select your flash drive.
      - It will show twice. One with UEFI prefix and another without.
      - Select with UEFI prefix. Ie.: "UEFI: Sandisk Cruzer"
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "HD".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot.
      
      The second part of the installation will begin. This will take 16 minutes.
       

      Post installation

      Install bootloader
       
      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.

      Open the Clover installer inside flash drive that you copied before.

      Use same options above but choose the system partition this time.

      Now you need to replace the EFI folder inside your destination disk EFI parittion, with EFI folder inside flash card EFI partition.

      If the flash drive EFI partition of your destination disk or flash drive is unmounted:
      Mount with terminal "sudo diskutil mount /dev/rdiskXs1". To know what X is, use "diskutil list", most likely is 0 for destination disk and 1 for flash drive.
       
      Then, eject the flash drive.
       
      Last step
       
      Move all Kexts from EFI partition to /Library/Extensions, with those commands in Terminal:
      sudo mv -R /Volumes/EFI/EFI/CLOVER/kexts/10.14/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
       
      It's done!

       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas and all others members involved directly or indirectly.
       
       
       
       
       
       
       
      Z370N-WIFI.zip
    • By ludufre
      Installing macOS Mojave on Lenovo ThinkPad L440

       
      There are two version of this laptop:
      - 20AS = Chipset QM87, without Express Card (mine).
      - 20AT = Chipset HM86, with Express Card.
      I strong believe is the same thing...
       

      Changelog:
       
      06/09/2019 14:16h GMT-0
      - Added missing parts in the post-install step. 
       
      06/04/2019 17:19h GMT-0
      - Updated Clover link. 
       
      06/02/2019 18:08h GMT-0
      - Added info about update 10.14.5. 
       
      03/13/2019 13:15h GMT-0
      - Updated info about touchpad replacement and CPU and 4G LTE modem.
       
      02/05/2019 18:47h GMT-0
      - Updated info about CPU replacement and 4G LTE modem.
       
      02/04/2019 15:24h GMT-0
      - Sometimes the VoodooHDA.kext doesn't work.
      - Added AppleHDADisabler.kext to fix that (attached bellow).
       
      01/24/2019 14:42h GMT-0
      - Added more adjustments to use of VoodooHDA.
      - Updated VoodooHDA links to 2.9.1 official (without installer).
      - Changed PCM volume from 90 to 180 in Info.plist (attached modified VoodooHDA.kext bellow)
      - Updated SSDT-L440.aml (Removed HDEF and HDAU, not needed).
      - Updated config.plist (Changed to user Audio layout to 1).
       
      01/22/2019 20:47h GMT-0
      - I gave up on the AppleALC.
      - Headset does not work.
      - Now with VoodooHDA is perfect and the sound even louder.
       
      01/22/2019 14:37h GMT-0
      - Added info about update 10.14.3. 
       
      01/22/2019 13:46h GMT-0
      - Added link to BIOS reassing guide.
       
      01/20/2019 11:49h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i5-4300M ->  Work. All SpeedStep stages.
      - Video Card: Intel HD4600 ->  Work. QE/CI and Metal.
      - Chipset: Intel QM87 ->  Work.
      - Mini DisplayPort ->  Work. But no audio, yet.
      - VGA ->  Not work. Normal.
      - Audio: ALC292 ->  Work.
      - WiFi/Bluetooth: Intel AC 7260 ->  Not work. Replaced with DW1560 (need whitelist removal).
      - Ethernet: Intel I217-LM ->  Work.
      - Card Reader: Realtek RTS5227 ->  Not work.
      - Keyboard and Touchpad ->  Work.
      - Webcam ->  Work.
      - Fingerprint Reader ->  Not work. Normal.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Extras
       
      - FullHD 1920x1080 display upgrade: 
      Replaced with AU Optronics B140HAN01.1 30pin eDP (B140HAN01.2 and B140HAN01.3 also compatible).
      Apparently same screen as Dell Latitude E6440, E7440, Lenovo Ideapad U430 and E129.
       
      - CPU upgrade:
      Replaced the stock Intel Core i5 4300M 2.6Ghz (3.3Ghz turbo) 6M cache with Intel Core i7 4700MQ 2.4Ghz (3.4Ghz turbo) 6MB.
      I initially had problems with overheating. The processor ran at full load above 90 degrees.
      After using a quality thermal paste I can work between 70 and 80 degrees.
      Acceptable taking into consideration that the new processor has 47TDP versus 37TDP which is recommended.
      I also had no problem consuming the battery while charging. The original 65W source seems to have figured out.
       
      - Touchpad upgrade:
      Replaced the stock with T460 touchpad.
      This is serious: you have to do it! It should be stock. Touchpad with precision and absurd quality!
      Just do it!
       
      - RAM upgrade:
      No mistery here. Just upgade.
       
       
      Todo
       
      - Make DP audio work.
      - Make Card Reader work.
      - Upgrade CPU to i7-4712MQ (Ordered. It's on the way) Done, but received i7-4700MQ (47w TDP, with good paste I have no overheating)
      - Replace touchpad with T460 model (Ordered. It's on the way) Done. Sensitivity and perception of quality much better. I recommend 100%!
      - Sierra Gobi5000 4G LTE modem EM7355 (Ordered. It's on the way. I hope works. ) Done, but not work. Recognize but not connect. I already gave up...
      - Upgrade to 16GB RAM Done
      - Make trackpad appear in System Preferences
       
       
      What you need to install

      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Mojave install app
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --nointeraction This will take about 30 minutes.
       


      Install bootloader

      Download the CloverEFI from SourceForge (used 4934) and install with this options on "Install macOS Mojave":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - ApfsDriverLoader-64
      - UEFI Drivers - AptioMemoryFix-64


       
       
      Make things works

      Will be created a partition named EFI and mounted in Desktop.
      - Replace the /Volumes/EFI/CLOVER/config.plist with mine attached below
                    If you have modded BIOS with Advanced Menu and enabled 128MB DRAM-prealloc use 128MB_DRAM-prealloc_config.plist.zip
                    If no, then use 32MB_DRAM-prealloc_config.plist.zip
      - Put SSDT-L440.aml attached below in /Volumes/EFI/CLOVER/ACPI/patched/
       
      Generate your Serial, MLB and SmUUID
       
      - Open the replaced config.plist with Clover Configurator (used 5.3.2.0)
      - Go to SMBIOS, click few times in "Generate New" in Serial Number and SmUUID.
       
      Download those Kexts and put in /EFI/CLOVER/kexts/Other/
       
      - Download the HWSensors 3 from here. I used the FakeSMC.kext, ACPIMonitor.kext and IntelCPUMonitor.kext inside of DMG version r196.
      - Download the VoodooPS2Controller.kext from here. I used version 2018-1008.
      - Download the IntelMausiEthernet.kext from here. I used the version 2018-1031.
      - Download the Lilu.kext from here. I used the version 1.3.6.
      - Download the VoodooHDA from here. I used the version 2.9.1 and patched the sound volume (attached below).
      - Download the WhateverGreen.kext from here. I used the version 1.2.9.
      - Download the AppleBacklightFixup.kext from here. I used the version 2018-1013.
      - Download the USBInjectAll.kext from here. I used the version 2018-1108.
      - Download the ACPIBatteryManager.kext from here. I used the version 2018-1005.
       
      - Download the VirtualSMC.kext from here. I used version 1.0.2. Replaced with FakeSMC of the HWSensors 3 r196 package.
      - Download the FakeSMC.kext from here. I used the version 2018-0915. Replaced with VirtualSMC.kext due 10.14.4 issues on update.
      - Download the AppleALC.kext from here. I used the version 1.3.4. Replaced with VoodooHDA.kext due mic not working.
       
       
      Wifi and Bluetooth (DW1560 / BCM94352Z)
       
      Unfortunately, some notebook manufacturers are currently blocking the replacement of wireless cards. They want you to only use the models sold by them. And of course, none of them from Lenovo for this notebook model is compatible with MacOS.
       
      If you try to start with an unauthorized wifi card for them, you will receive a screen error:
      1802: Unauthorized network card is plugged in - Power off and remove the network card. Since this check is done directly in the BIOS, the only solution is to modify it.
      But since nothing is easy in this life, there is one small big problem:
      - The BIOS update procedure does not allow you to use modded files as it used to be.
      - You will need to physically reach your BIOS on the motherboard and make use of a USB BIOS reader/writer.
       
      So what you need to do:
      1. Disassembly your laptop;
      2. Dump your BIOS with an USB BIOS reader with SOIC8 clip (to not desolder from the motherboard);
      3. Patch it (In addition to removing the whitelist, add the advanced menu);
      4. Fix RSA signature;
      5. Reflash BIOS;
      6. Replace wireless card;
      7. Remount your laptop;
      8. Done.
       
      Soon, I'll provide step by step in this process. Probably until end of this week.
      In the meantime, if you need to, send me your dump that I do steps 3 and 4 for you.
      I also add the Advanced Menu so you can increase to 128MB the DRAM-prealloc.
       
      To fix a Modded BIOS to remove the 5 beeps on boot, you need this guide: https://www.insanelymac.com/forum/topic/337333-guide-fix-insyde-h2o-bios-signature-5-beeps-on-lenovo (traduzido: pt-BR)
       
       
      After replaced the wireless card. Download those Kexts and put in /EFI/CLOVER/kexts/Other/
       
      - Download the AirportBrcmFixup.kext from here. I used the version 2.0.0.
      - Download the BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext from here. I used the version 2018-0505.
      - Download the BT4LEContinuityFixup.kext from here. I used the version 1.1.2.
       
       
      Now you can start the instalation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      My BIOS is the latest: 1.93 (J4ET93WW) 

      - Shutdown and insert the flash drive.
      - Power on with F1 pressed to enter BIOS setup.
      - Change value: Config - Intel(R) AMT - Intel(R) AMT Control to DISABLED
      - Change value: Security - Security Chip to DISABLED
      - Change value: Security - Anti-Theft - Intel(R) AT Module Activation to DISABLED
      - Change value: Security - Anti-Theft - Computrace to DISABLED
      - Change value: Security - Secure Boot to DISABLED
      - Change value: Startup - UEFI/Legacy Boot to BOTH, Legacy First and CSM Support = Yes
      - Save & Exit Setup (F10)
       
      - Now, hold the F12
      - In the list, select your flash drive.
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "Macintosh".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot. Maybe you have to press F12 again and select the flash drive.
      
      The second part of the installation will begin. This will take 16 minutes.
       

      Post installation

      Install bootloader
       
      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.

      Open the Clover installer inside flash drive that you copied before.

      Use same options above but choose the system partition this time.

      Now you need to replace the EFI folder inside your destination disk EFI parittion, with EFI folder inside flash card EFI partition.

      If the flash drive EFI partition of your destination disk or flash drive is unmounted:
      Mount with terminal "sudo diskutil mount /dev/rdiskXs1". To know what X is, use "diskutil list", most likely is 0 for destination disk and 1 for flash drive.
       
      Then, eject the flash drive.
       
      Last step
       
      Move all Kexts from EFI partition to /Library/Extensions, with those commands in Terminal:
      sudo mv -R /Volumes/EFI/EFI/CLOVER/kexts/Other/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
       
      It's done!
       
       
      Updates
       
      System update 10.14.3
       
      - Updated with success;
      - Everything works perfectly after reboot;
       

       
       
      System update 10.14.4
       
      - Updated Clover to 4910.
      - Updated Lilu.kext to 1.3.5 and WhateverGreen to 1.2.7.
      - After first reboot the update progress stoped with:
      GTrace synchronization point 4 Unsupported CPU Unsupported PCH hmm.. mismatch sizes: 3100 vs 20 It was still possible to start the previous installation, selecting "Macintosh" as opposed to "macOS Install" in Clover.
      So I created a flash drive with Clover 4910 and put only my config.xml, SSDT-L440.aml, the updated Lilu.kext and WhateverGreen.kext. And I decided to test VirtualSMC instead of FakeSMC.kext.
      With this I was able to install update 10.14.4. After installation I can boot normally, even with FakeSMC.kext that already in /Library/Extensions.
      I do not know what exactly happened, but now works everything like was previously.
       


       
       
      System update 10.14.5
       
      - Updated Clover to 4934.
      - Updated Lilu.kext to 1.3.6 and WhateverGreen to 1.2.9.
      - After first reboot the update progress stoped again (like 10.14.4 update) with:
      GTrace synchronization point 4 Unsupported CPU Unsupported PCH hmm.. mismatch sizes: 3100 vs 20 It was still possible to start the previous installation, selecting "Macintosh" as opposed to "macOS Install" in Clover.
      I decided to rollback to FakeSMC.kext but this time with the version of HWSensors 3. Link above.
      With this I was able to install update 10.14.5. After installation I can boot normally.
       

       
       

      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas, @Shiki and all others members involved directly or indirectly.
       
       
       
       
       
       
      32MB_DRAM-prealloc_config.plist.zip
      128MB_DRAM-prealloc_config.plist.zip
      SSDT-L440.aml
      VoodooHDA.kext.zip
      AppleHDADisabler.kext.zip
×