Jump to content
WarDoc

WhatEverGreen Support Topic

1,062 posts in this topic

Recommended Posts

Not sure if worth noting but when using clovers ati injection was when sleep worked.

 

How did you know the correct address? I misread and used the hdmi address but much better anyway shows

the proper vram reading. Not sure about sleep working yet being on screen sharing now. Would hdmi audio

support happen in future for 10.11 or is it something in 10.12+ changed? 

 

Maybe now theres a better debug report?

 

its a lot of api failed to load again but different .. consider rebuild of prelinked kernel as lilu triggered rebuild

Share this post


Link to post
Share on other sites
Advertisement

Does your mainboard UEFI-capable? Does your card have UEFI VideoBIOS? If both questions "yes" try to disable CSM and make PCIe graphics card primary. If first question "yes" and second "no" try to find way to flash UEFI VideoBIOS in your card. Search Google how to flash UEFI GOP in AMD videocards. If first question "no" you could try different VideoBIOSes even from another vendor. Just make sure that type and amount of connectors, video memory and GPU/Memory frequencies will be equal to your card.

 

That's all i can suggest you.  

 

I thought my card was UEFI capable but turns out it isn't (just noticed that when I try to disable CSM, it just re-enables itself). I'll try finding a UEFI VideoBIOS. Thanks!

 

Edit: I'm having trouble finding one. Is this really the only solution? If so, I might just revert back to Sierra and use Verde.kext instead, because that worked fine.

Share this post


Link to post
Share on other sites

I thought my card was UEFI capable but turns out it isn't (just noticed that when I try to disable CSM, it just re-enables itself). I'll try finding a UEFI VideoBIOS. Thanks!

 

Edit: I'm having trouble finding one. Is this really the only solution? If so, I might just revert back to Sierra and use Verde.kext instead, because that worked fine.

you can patch a 7770 to have uefi i just can't find the program

Share this post


Link to post
Share on other sites

My realtek audio got knocked out with the latest whatevergreen.kext 1.1.0 _ lilu 1.2.0. I have limited ability to self diagnose and usually have to ask for help. If anyone can advise me on what info I can gather to see if it's a simple config.plist addition or subtraction I'd appreciate it. I went back to lilu 1.1.7 and whatevergreen 1.0.4. The previous kexts are great, just wanted to report in case there is something that others might benefit from. Thanks for the info, johnm

Share this post


Link to post
Share on other sites

Hi @vandroiy2012

 

I'm just curious Is it possible to use lilu and whatevergreen on older hardware to boot into High Sierra? I tried and it will give me the black screen. I remember I've read about not using these kexts on older hardware in the read me on the whatever green on git hub.

They work fine on Sierra though.

 

My rig is: GA-EP45, Core 2 Duo E8400 and the GPU is Sapphire Radeon HD 7790 Dual-X 1GB.

 

Thanks for you support and your time man :)

i have bought amd rx580 and planed to sell my gtx960

Share this post


Link to post
Share on other sites

i have bought amd rx580 and planed to sell my gtx960

That's great congrats. :)

 

My problem is with an old PC which doesn't support UEFI and there are other users that have the same problem with High Sierra.

 

you can patch a 7770 to have uefi i just can't find the program

I believe this is what you are referring to:

http://www.insanelymac.com/forum/topic/299614-asus-eah6450-video-bios-uefi-gop-upgrade-and-gop-uefi-binary-in-efi-for-many-ati-cards/

 

They created an app called "AMD GOP UEFI Maker" which converts the ROM of nonUEFI video card to UEFI capable video card.

Share this post


Link to post
Share on other sites
I believe this is what you are referring to:

http://www.insanelymac.com/forum/topic/299614-asus-eah6450-video-bios-uefi-gop-upgrade-and-gop-uefi-binary-in-efi-for-many-ati-cards/

 

They created an app called "AMD GOP UEFI Maker" which converts the ROM of nonUEFI video card to UEFI capable video card.

 

After a very stressful hour and a half (I'm already paranoid when it comes to updating BIOSes, so installing a modified one was really scary for me), IT'S WORKING! I just made sure to disable CSM (and it actually stayed disabled this time) and booted with -raddvi, and both monitors are working! Thank you so much @vandroiy2012 @WarDoc and @cyberdevs, you are my heroes!

 

Quick note: From that thread, I had to use the first version of the "AMD UEFI GOP Maker" software by STLVNUB (post #7); the second version did not patch my VBIOS properly (ATIFlash gave the error message "cannot flash a 0x2e000 length image into a 0x20000 length ROM"). I flashed through DOS.

 

Edit: Just noticed that there's an entry in the FAQ called "How do I flash my GPU?"... I really need to start reading those more carefully :rolleyes:

Share this post


Link to post
Share on other sites

After a very stressful hour and a half (I'm already paranoid when it comes to updating BIOSes, so installing a modified one was really scary for me), IT'S WORKING! I just made sure to disable CSM (and it actually stayed disabled this time) and booted with -raddvi, and both monitors are working! Thank you so much @vandroiy2012 @WarDoc and @cyberdevs, you are my heroes!

 

Quick note: From that thread, I had to use the first version of the software by STLVNUB (post #7); the second version did not patch my VBIOS properly.

 

Glad to hear it :thumbsup_anim:

Share this post


Link to post
Share on other sites

Is it possible somehow to disable a Nvidia graphics card in the SSDT? Let's say I have a 1080Ti in the first slot for windows only and in the third slot there is the Radeon Pro WX 5100. If I boot with Whatevergreen it boots to a black screen because of the Nvidia card. (No web drivers installed).

Share this post


Link to post
Share on other sites

just info .. running mavericks 10.9.5 with ATI HD 4710 @ asus P5KPL-CM non uefi :)  with lilu+whatevergreen, clover 4200 bf keepsyms=1 -lilubeta -radbeta

Starting Clover revision: 4200 on CLOVER EFI
25:112 0:002 Extra kext: EFI\CLOVER\kexts\10.9\WhateverGreen.kext
25:115 0:003 Extra kext: EFI\CLOVER\kexts\10.9\Lilu.kext

 

post-1113740-0-58328800-1507825132_thumb.jpg

Share this post


Link to post
Share on other sites

After a very stressful hour and a half (I'm already paranoid when it comes to updating BIOSes, so installing a modified one was really scary for me), IT'S WORKING! I just made sure to disable CSM (and it actually stayed disabled this time) and booted with -raddvi, and both monitors are working! Thank you so much @vandroiy2012 @WarDoc and @cyberdevs, you are my heroes!

 

Quick note: From that thread, I had to use the first version of the "AMD UEFI GOP Maker" software by STLVNUB (post #7); the second version did not patch my VBIOS properly (ATIFlash gave the error message "cannot flash a 0x2e000 length image into a 0x20000 length ROM"). I flashed through DOS.

That's great :) I'm glad that it was helpful ;)

Share this post


Link to post
Share on other sites

Hello, 

 

Updated to 12.6 for r9 290 Hdmi audio but it still does not work.

 

Can anything be told about why and what needs changed with the debug logs?

 

edit: I RTFM'd this time so its a real debug log :P

 

Reading a bit more in the faqs, I see in hdmi audio section that an identifiers

not present may need to be edited and it gives an exampe of the r9 290x. 

Maybe the device id is different than the 290 no x? I get this from r9 290x:

 

AhDIqg== but how to convert that to the device id number im not sure.

 

but maybe its the same in both cards? 1002:AAC8? If so seems should work?

AppleALC:Lilu Debug.zip

Lilu:Whatevergreen Debug.rtf

Share this post


Link to post
Share on other sites

Hi all,

 

I have been running an older version of Lilu and WhateverGreen with a FirePro W9000 and offline HD 7970 and triple Dell UP2715K's (along with some manual MST tweaks) with great success.  About the only issue is that occasionally on wake from sleep a monitor will not wake properly, and that turning off monitors and turning them back on while the computer is on can also put the card into a somewhat unstable state.

 

I wanted to point out that there is a problem with the latest versions of Lilu and WhateverGreen.  For some reason, it appears the kext is now designed to force the ACPI name to GFX0.  It is doing this for ALL graphics cards in the system.  This is despite my manually designed SSDT's identifying individual cards as GFX1 and GFX2 ... it's simply overriding them and naming both GFX0.

 

This behavior is too aggressive, in my opinion, as it makes it impossible to target a specific card in other kexts (specifically, AGDP) and it has broken my 5k MST support edits.  Would it be possible to make this GFX0 renaming feature optional?

Share this post


Link to post
Share on other sites

Alright, I see the problem. What if I change GPU names only if they do not start with GFX prefix? This should leave you with custom GFX1/GFX2 names.

And in addition to that I will also add a boot-arg and SSDT option to completely disable digital audio injection code (which includes GFX renaming).

Sounds good enough?

Share this post


Link to post
Share on other sites

Just thought I detail a small issues with current whatever green metal is buggy from app to app in geek bench metal doesn’t work it runs for 1 second and that’s it no score so full run ... and another thing no with obs we can’t use hardware encoder which I could do without whatevergreen

 

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Alright, I see the problem. What if I change GPU names only if they do not start with GFX prefix? This should leave you with custom GFX1/GFX2 names.

And in addition to that I will also add a boot-arg and SSDT option to completely disable digital audio injection code (which includes GFX renaming).

Sounds good enough?

Yes, that sounds like the customization can be made on multiple fronts then.  It would fix my immediate problem for sure.  Thanks for looking at this.

 

Another question ... do you have any understanding of how sense-id or other configuration settings interact with MST displays?  I'm trying to understand what causes the occasional instability in these displays when waking up and especially when hot plugging them when the computer is on.  It may come down to just hardware differences between a true Mac Pro 2013 and the hackintosh.

 

Very much appreciate your work in solving these ATI issues.  Using these 5K displays is a bit masochistic on my part ... WhateverGreen was the final piece of the puzzle that made it all come together!

Share this post


Link to post
Share on other sites

Thanks vit9696 for the updated kext. Finally have multi monitors working on my RX 580. Still using helper IGPU for boot.

Audio seems to show in settings but no output on LG TV.

attaching some screenshots from dpcimanager. I noticed my audio is configured as R6xxHDMI?????

Any way to fix this?

 

IM on 10.12.6

INTELNUC7i5BNH

RX580 / Akitio Node Egpu

post-210369-0-79424900-1508068210_thumb.png

post-210369-0-79901100-1508068223_thumb.png

Share this post


Link to post
Share on other sites

It should be like that

attachicon.gifСнимок экрана 2017-10-12 в 02.07.05.png

 

Just copy it

		<key>Arbitrary</key>
		<array>
			<dict>
				<key>Comment</key>
				<string>Inject AMD Graphics properties</string>
				<key>CustomProperties</key>
				<array>
					<dict>
						<key>Key</key>
						<string>device-id</string>
						<key>Value</key>
						<data>
						sGcAAA==
						</data>
					</dict>
				</array>
				<key>PciAddr</key>
				<string>01:00.00</string>
			</dict>
		</array>

About choosing correct PciAddr look here http://www.insanelymac.com/forum/topic/325987-whatevergreen-support-topic/?p=2489296

 

And obligatorily disable clover ATI injection!!!

Thank you for that help. It sleeps every time and will test with another display too. Couldnt get hdmi audio working. Now trying Arbitrary for that.

 

I got this for device-id: 0A0D0000 and address 01.00.01  edit: not worked, maybe with a clean dsdt? I tried removing HDAU

Maybe I try clover kext patches with the example from the faq? Counts and Min kernel dont know but find and replace

Share this post


Link to post
Share on other sites

This link, from the first post, is not working:

https://github.com/vit9696/WhateverGreen%C2%A0

 

I google it and I get other source.

 

When I applied in terminal de command I get this:

 

Security policy loaded: Lilu Kernel Extension 1.1.0 (Lilu)

2017-10-15 13:49:47.569158-0300  localhost kernel[0]: Kext as.vit9696.WhateverGreen - library kext as.vit9696.Lilu not compatible with requested version 1.2.0.

2017-10-15 13:49:47.569161-0300  localhost kernel[0]: Can't load kext as.vit9696.WhateverGreen - failed to resolve library dependencies.

2017-10-15 13:49:47.569162-0300  localhost kernel[0]: Kext as.vit9696.WhateverGreen failed to load (0xdc00800e).

2017-10-15 13:49:47.569164-0300  localhost kernel[0]: Failed to load kext as.vit9696.WhateverGreen (error 0xdc00800e).

2017-10-15 13:49:47.569568-0300  localhost kernel[0]: Couldn't alloc class "WhateverGreen"

 
 
Any help?

Share this post


Link to post
Share on other sites

Anyone out here who uses successfully an Dual Vega 64 Setup?

Look up PunkNugget, he has dual Vegas, I tested them it’s a lot of power compnsumption for little benefit in most apps. Luxmark Ball used it but the majority of apps out there won’t use them.

Share this post


Link to post
Share on other sites

I have Sapphire Nitro RX 580 8G. The card works great with Lilu.kext and WhateverGreen.kext in 10.12.6. The Dual Dell 24" 4K monitor works without issue. After installing High Sierra, only one monitor works. The card has 2 DP, 2 HDMI and one DDVI connector. Both the monitors are connected using Dell DP cable. 

 

What can I do to get my both monitor working in High Sierra? Thanks.

Share this post


Link to post
Share on other sites

I have Sapphire Nitro RX 580 8G. The card works great with Lilu.kext and WhateverGreen.kext in 10.12.6. The Dual Dell 24" 4K monitor works without issue. After installing High Sierra, only one monitor works. The card has 2 DP, 2 HDMI and one DDVI connector. Both the monitors are connected using Dell DP cable. 

 

What can I do to get my both monitor working in High Sierra? Thanks.

 I have exactly the same problem with the RX 480 8GB from MSI. I am now using one HDMI and one DP port, instead of the 2 DP ports. You can solve this problem by using SM BIOS iMac 18,3, but that is only recommended when you using a kabylake processor. I have a 6600k skylake Processor, so i'am using SM BIOS 17,1 where 1 DP don't work. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By headkaze
      Framebuffer patching in Mojave
      Binary patching framebuffers using KextsToPatch in Clover is no longer a viable method in Mojave for Skylake and above. Now you need to use Lilu + WhateverGreen.
       
      Not just for Mojave
      This method of framebuffer patching is not only required for Mojave we recommend it for all previous and future releases of macOS.
       
      Coffee Lake Users
      Please note that the new WhateverGreen will not work with fake Kaby Lake platform-id's. You will need to have either macOS 10.14 Beta 4 (18A336e) or macOS High Sierra 10.13.6 (17G2112). The latter is a special build only available to MacBookPro15,1 or MacBookPro15,2 board id's. You can create a macOS High Sierra 10.13.6 (17G2112) installer by running installinstallmacos.py. (Update: vit9696 added back ability to fake Kaby Lake platform-id's)
       
      Lilu + WhateverGreen
      WhateverGreen is going to replace all the other video patching plugins for Lilu (it currently has merged WhateverGreen, IntelGraphicsFixup, NvidiaGraphicsFixup, Shiki and CoreDisplayFixup). Others will likely follow (such as AppleALC, HibernationFixup and IntelGraphicsDVMTFixup). This is aiming to be the all-in-one solution for video.
       
      Preliminary
      1. Remove:
      - FakePCIID_Intel_HD_Graphics
      - IntelGraphicsFixup
      - NvidiaGraphicsFixup
      - CoreDisplayFixup
      - Shiki
      2. Turn off all graphics injections in Clover:
      - config.plist/Graphics/Inject/ATI=NO
      - config.plist/Graphics/Inject/Intel=NO
      - config.plist/Graphics/Inject/NVidia=NO
      - config.plist/Graphics/ig-platform-id=
      - config.plist/Devices/FakeID/IntelGFX=

      3. Disable DSDT Clover fixes:
      - AddHDMI
      - FixDisplay
      - FixIntelGfx
      - AddIMEI
      4. Disable UseIntelHDMI
      5. Remove boot argument: -disablegfxfirmware
      6. Remove any IGPU and HDMI entries from:
      - config.plist/Devices/Arbitrary
      - config.plist/Devices/Properties
      - config.plist/Devices/AddProperties
      7. Remove any IGPU and HDMI related SSDT and DSDT from:
      - CLOVER/ACPI/patched
      8. Renaming GFX0 -> IGPU
      - WhateverGreen will do this automatically (see caveat below)
      - Be aware that WhateverGreen does not rename all instances of GFX0 -> IGPU but should be okay in most cases
      - You may need to include Clover GFX0 -> IGPU rename for other kexts or ACPI patching that require it
       
      Compile Lilu + WhateverGreen
      Download WhateverGreen. Make sure you place the debug version of Lilu into the root of WhateverGreen before you compile. Install Lilu and WhateverGreen kext's into the usual place. Compile WhateverGreen as debug if you want to view debug output.
       
      Having trouble compiling?
      If you're having trouble compiling you can download the official release binaries or download my (unsupported) build_lilu.sh shell script and run it in a folder to download and build Lilu + WhateverGreen using Xcode automatically. I recommend you try the debug versions first (place them into Clover's EFI/Clover/kexts/Other folder).
       
      Get the device path of your IGPU:
      Download and use the gfxutil tool like so:
      $ ./gfxutil IGPU = PciRoot(0x0)/Pci(0x2,0x0) ig-platform-id
      For the AAPL,ig-platform-id (AAPL,snb-platform-id for Sandy Bridge) entry Clover requires this value to be in Data format so you need to reverse the bytes. So if you want your platform-id to be 0x3EA50009 first reverse the bytes (0900A53E) then use Xcode's plist editor to add the values to Clover's config.plist.

       
      What ig-platform-id should I use for my system?
      You should choose one that is the closest match to your system. I recommend you do some research on this before choosing one. See post #2 for available options. More info can be found here.
       
      You can determine the generation of your CPU by the first digit after the hyphen.
      Examples:
      - Intel(R) Core(TM) i5-2760QM (Gen 2)
      - Intel(R) Core(TM) i7-5257U CPU @ 2.70GHz (Gen 5)
      - Intel(R) Core(TM) m3-6Y30 (Gen 6)
      - Intel(R) Core(TM) i5-8350U (Gen 8)
       
      Spoofing Intel CPU Gen
      If you need to spoof a different Intel CPU generation you can use the lilucpu=N boot flag. The N refers to the following Intel generations:
      4    SandyBridge 5    IvyBridge 6    Haswell 7    Broadwell 8    Skylake 9    KabyLake 10   CoffeeLake To spoof a CPU you will need to set a valid device-id in your GPU entry in Devices/Properties for the appropriate Intel generation.
       
      Eg. Spoofing Skylake (lilucpu=8 boot flag with device-id=0x16190000), Kaby Lake (lilucpu=9 boot flag with device-id=0x12590000).
       
      Here are some recommended frames:
       
      Gen 2: Sandy Bridge (Intel HD Graphics 2000/3000)
      - S/L/E/AppleIntelSNBGraphicsFB.kext
      - Support started with OS X 10.7.x and ended with macOS 10.13.6
      - Metal support is not available
      - device-id: 0x0102 0x0106 0x010A 0x0112 0x0116 0x0122 0x0126
      - AAPL,snb-platform-id (desktop): 0x00030010 (default)
      - AAPL,snb-platform-id (laptop): 0x00010000 (default)
       
      Gen 3: Ivy Bridge (Intel HD Graphics 2500/4000)
      - S/L/E/AppleIntelFramebufferCapri.kext
      - Support started with OS X 10.8.x
      - device-id: 0x0152 0x0156 0x0162 0x0166
      - AAPL,ig-platform-id (desktop): 0x0166000A (default), 0x01620005
      - AAPL,ig-platform-id (laptop): 0x01660003 (default), 0x01660009, 0x01660004
       
      Gen 4: Haswell (Intel HD Graphics 4200-5200)
      - S/L/E/AppleIntelFramebufferAzul.kext
      - Support started with OS X 10.9.x
      - device-id: 0x0D26 0x0A26 0x0A2E 0x0D22 0x0412
      - AAPL,ig-platform-id (desktop): 0x0D220003 (default)
      - AAPL,ig-platform-id (laptop): 0x0A160000 (default), 0x0A260005 (recommended)
       
      Gen 5: Broadwell (Intel HD Graphics 5300-6300)
      - S/L/E/AppleIntelBDWGraphicsFramebuffer.kext
      - Support started with OS X 10.10.2
      - device-id: 0x0BD1 0x0BD2 0x0BD3 0x1606 0x160E 0x1616 0x161E 0x1626 0x1622 0x1612 0x162B
      - AAPL,ig-platform-id (desktop): 0x16220007 (default)
      - AAPL,ig-platform-id (laptop): 0x16260006 (default)
       
      Gen 6: Skylake (Intel HD Graphics 510-580)
      - S/L/E/AppleIntelSKLGraphicsFramebuffer.kext
      - Support started with OS X 10.11.4
      - device-id: 0x1916 0x191E 0x1926 0x1927 0x1912 0x1932 0x1902 0x1917 0x193B 0x191B
      - AAPL,ig-platform-id (desktop): 0x19120000 (default)
      - AAPL,ig-platform-id (laptop): 0x19160000 (default)
       
      Gen 7: Kaby Lake (Intel HD Graphics 610-650)
      - S/L/E/AppleIntelKBLGraphicsFramebuffer.kext
      - Support started with macOS 10.12.6
      - device-id: 0x5912 0x5916 0x591B 0x591C 0x591E 0x5926 0x5927 0x5923 0x87C0
      - AAPL,ig-platform-id (desktop): 0x59160000 (default)
      - AAPL,ig-platform-id (laptop): 0x591B0000 (default)
       
      Gen 8: Coffee Lake (Intel UHD Graphics 630)
      - S/L/E/AppleIntelCFLGraphicsFramebuffer.kext
      - Support started with macOS 10.13.6 (17G2112) / 10.14 beta 4 (18A336e)
      - device-id: 0x3E9B 0x3EA5 0x3EA6 0x3E92 0x3E91 0x3E98
      - AAPL,ig-platform-id (desktop): 0x3EA50000 (default), 0x3E9B0007 (recommended)
      - AAPL,ig-platform-id (laptop): 0x3EA50009 (default)
       
      Framebuffer Patching
      WhateverGreen does most of the work automatically for you and in most cases you do not need any extra Framebuffer Patching. At the minimum though you should choose an ig-platform-id suitable for your system and place it in config.plist/Devices/Properties like this:

      Here are some reasons why you might need extra Framebuffer Patching:
      - Setting DVMT for those who can't set it above 32 MB in BIOS (framebuffer-stolenmem / framebuffer-fbmem)
      - Setting higher VRAM for 4K users who experience graphical glitches (framebuffer-unifiedmem)
      - Disabling eGPU (disable-external-gpu)
      - Enable pixel clock patch for 4K support (enable-hdmi20)
      - Disabling connectors to enable sleep (framebuffer-pipecount / framebuffer-portcount / framebuffer-conX-type=-1)
      - Removing CNConnectorAlwaysConnected flag for eDP laptop screens on < 10.13.6 (framebuffer-con0-flags=0x00000090)
      - Changing connector types to match your systems ports (framebuffer-conX-type)
       
      Framebuffer Patching Types
      We have three different types of patches:
       
      1. Arbitrary (Recommended)
      framebuffer-patch-enable (required to enable below) framebuffer-framebufferid (optional; defaults to current platform-id) (all below are optional) framebuffer-mobile framebuffer-pipecount framebuffer-portcount framebuffer-memorycount framebuffer-stolenmem framebuffer-fbmem framebuffer-unifiedmem framebuffer-cursormem (Haswell only) framebuffer-camellia framebuffer-flags framebuffer-conX-enable (required to enable below) framebuffer-conX-index framebuffer-conX-busid framebuffer-conX-pipe framebuffer-conX-type framebuffer-conX-flags 2. All Data
      framebuffer-conX-enable (required to enable below) framebuffer-conX-alldata 3. Find / Replace
      framebuffer-patchX-enable (required to enable below) framebuffer-patchX-framebufferid (optional; defaults to current platform-id) framebuffer-patchX-find framebuffer-patchX-replace framebuffer-patchX-count (optional; defaults to 1) You should place your patches in config.plist/Devices/Properties in Clover config.plist.
       
      Here are some example patches:
      - 32MB BIOS, 19MB stolen (framebuffer) 9MB fbmem (cursor) 2048MB unifiedmem (vram)

       
      - Pipe / Port Count 3 to 2
      - Connector 1 DP to HDMI
      - Connector 2 Disable

       
      Here is an example of the All Data method:

       
      Here is an example of the Find / Replace method:

       
      Framebuffer Dumps
      There are two ways to dump your framebuffer data (both require WhateverGreen + Lilu debug versions):
       
      1. Using -igfxdump boot flag to dump IGPU framebuffer kext to /AppleIntelFramebuffer_X_Y (root of your boot drive)
       
      There are several ways of reading this dump:
      - Using 010 Editor along with the IntelFramebuffer.bt template
      - Using Hackintool File->Open menu
       
      2. Using -igfxfbdump boot flag to dump native and patched framebuffer table to ioreg at IOService:/IOResources/WhateverGreen
       
      There are several ways of reading this dump:
      - Using dump_platformlist.sh shell script
      - Using Hackintool File->Import->IOReg Dump menu
       
      3. Using Hackintool Framebuffer->macOS 10.14 menu
       
      Adjusting the brightness on a laptop
      1. Method 1
      Enable Clover DSDT fix AddPNLF. Enable SetIntelBacklight and SetIntelMaxBacklight. A specific value is not necessary - it will be automatically injected according to the processor installed.
      2. Method 2
      Use this ACPI table: SSDT-PNLF.dsl SSDT-PNLF.aml
      Do not use both methods at the same time!
       
      Digital Audio (HDMI / DVI / DP)
      To enable digital audio it is necessary to set the necessary properties and, usually, patch the connectors.
      To enable audio in general and HDMI in particular use WEG along with AppleALC.kext.
      On 10.10.5 and above, WEG automatically changes the connector-type of DP (00040000) to HDMI (00080000) if no custom patches are used.
      The actual connection may be of any type (HDMI / DVI / DP), but for the digital audio to function the connector-type must explicitly be HDMI.
       
      VGA support
      In most cases with Intel Skylake and newer it works by default.
      For Ivy Bridge and possibly other generations there are the options to patch your connectors with the following:
      06020000 02000000 30000000 // Option 1
      06020000 01000000 30000000 // Option 2
      On OS X 10.8.2 and newer it is impossible to have VGA on Ivy Bridge systems.
      Hot-plugging VGA usually does not work.
      In case this doesn't help - there are no other known solutions at this time.
       
      EDID
      EDID is usually correctly identified, so no actions are required. In rare cases, EDID needs to be injected manually.
      An EDID dump can be obtained, for example, with Linux. The correct EDID must be put into *AAPL00,override-no-connect* property for IGPU, where the second 0 stands for the display number.
      In some cases the EDID dump may be incompatible with macOS and leads to distortions. For some EDID in such cases you can use this script, which corrects a provided EDID and saves it to your desktop.
       
      HDMI in UHD resolution with 60 fps
      Add the enable-hdmi20 property to IGPU, otherwise you will get a black screen. Or instead of this property use the boot-arg -cdfon
       
      Disablng a discrete graphics card
      Add the disable-external-gpu property to IGPU. Or instead of this property, use the boot-arg -wegnoegpu
       
      Fix the invalid maximum link rate issue on some laptops (Dell XPS 15 9570, etc.)
      Add the enable-dpcd-max-link-rate-fix property to IGPU, otherwise a kernel panic would happen due to a division-by-zero. Or instead of this property, use the boot-arg -igfxmlr.
      You could also manually specify a maximum link rate value via the dpcd-max-link-rate for the builtin display.
      Typically use 0x14 for 4K display and 0x0A for 1080p display. All possible values are 0x06 (RBR), 0x0A (HBR), 0x14 (HBR2) and 0x1E (HBR3). If an invalid value is specified, the default value 0x14 will be used instead. If this property is not specified, same as above.  
      Fix the infinite loop on establishing Intel HDMI connections with a higher pixel clock rate on Skylake, Kaby Lake and Coffee Lake platforms
      Add the enable-hdmi-dividers-fix property to IGPU or use the -igfxhdmidivs boot argument instead to fix the infinite loop when the graphics driver tries to establish a HDMI connection with a higher pixel clock rate, for example connecting to a 2K/4K display with HDMI 1.4, otherwise the system just hangs (and your builtin laptop display remains black) when you plug in the HDMI cable.  
      1. General Notes
      For those who want to have "limited" 2K/4K experience (i.e. 2K@59Hz or 4K@30Hz) with their HDMI 1.4 port, you might find this fix helpful. For those who have a laptop or PC with HDMI 2.0 routed to IGPU and have HDMI output issues, please note that this fix is now succeeded by the LSPCON driver solution, and it is still recommended to enable the LSPCON driver support to have full HDMI 2.0 experience.  
      (You might still need this fix temporarily to figure out the connector index of your HDMI port. See the LSPCON section below.)
      LSPCON driver support to enable DisplayPort to HDMI 2.0 output on IGPU
      1. Brief Introduction
      Recent laptops (Kaby Lake/Coffee Lake-based) are typically equipped with a HDMI 2.0 port. This port could be either routed to IGPU or DGPU, and you can have a confirmation on Windows 10. Intel (U)HD Graphics, however, does not provide native HDMI 2.0 output, so in order to solve this issue OEMs add an additional hardware named LSPCON on the motherboard to convert DisplayPort into HDMI 2.0.
      LSPCON works in either Level Shifter (LS) or Protocol Converter (PCON) mode. When the adapter works in LS mode, it is capable of producing HDMI 1.4 signals from DisplayPort, while in PCON mode, it could provide HDMI 2.0 output. Some onboard LSPCON adapters (e.g. the one on Dell XPS 15 9570) have been configured in the firmware to work in LS mode by default, resulting a black screen on handling HDMI 2.0 connections.
      Starting from version 1.3.0, WhateverGreen now provides driver support for the onboard LSPCON by automatically configuring the adapter to run in PCON mode on new HDMI connections, and hence solves the black screen issue on some platforms.
       
      2. Before you start
      LSPCON driver is only applicable for laptops and PCs with HDMI 2.0 routed to IGPU. LSPCON driver is necessary for all newer platforms unless the new IGPU starts to provide native HDMI 2.0 output. Supported Intel Platform: Skylake, Kaby Lake, Coffee Lake and later.
      Skylake Case: Intel NUC Skull Canyon; Iris Pro 580 + HDMI 2.0 with Parade PS175 LSPCON.
      Coffee Lake Case: Some laptops, e.g. Dell XPS 15 9570, are equipped with HDMI 2.0 and Parade PS175 LSPCON. If you have confirmed that your HDMI 2.0 is routed to IGPU and is working properly right now, you don't need to enable this driver, because your onboard LSPCON might already be configured in the firmware to work in PCON mode.
      3. Instructions
      Dump your kernel log and you should also be able to see something simillar to lines below.
       
      // When you insert the HDMI 2.0 cable igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB0] called with controller at 0xffffff81a8680000 and framebuffer at 0xffffff81a868c000. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB0] No LSPCON chip associated with this framebuffer. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB0] Will call the original method. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB0] Returns 0x0. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] called with controller at 0xffffff81a8680000 and framebuffer at 0xffffff81a869a000. igfx @ (DBG) SC:   LSPCON::probe() DInfo: [FB2] Found the LSPCON adapter: Parade PS1750. igfx @ (DBG) SC:   LSPCON::probe() DInfo: [FB2] The current adapter mode is Level Shifter (DP++ to HDMI 1.4). igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] LSPCON driver has detected the onboard chip successfully. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] LSPCON driver has been initialized successfully. igfx @ (DBG) SC: LSPCON::getMode() DInfo: [FB2] The current mode value is 0x00. igfx @ (DBG) SC: LSPCON::getMode() DInfo: [FB2] The current mode value is 0x00. igfx @ (DBG) SC: LSPCON::getMode() DInfo: [FB2] The current mode value is 0x00. igfx @ (DBG) SC: LSPCON::getMode() DInfo: [FB2] The current mode value is 0x01. igfx @ (DBG) SC: LSPCON::setMode() DInfo: [FB2] The new mode is now effective. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] The adapter is running in preferred mode [Protocol Converter (DP++ to HDMI 2.0)]. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] Will call the original method. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] Returns 0x0. // When you remove the HDMI 2.0 cable igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB0] called with controller at 0xffffff81a8680000 and framebuffer at 0xffffff81a868c000. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB0] No LSPCON chip associated with this framebuffer. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB0] Will call the original method. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB0] Returns 0x0. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] called with controller at 0xffffff81a8680000 and framebuffer at 0xffffff81a869a000. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] LSPCON driver (at 0xffffff802ba3afe0) has already been initialized for this framebuffer. igfx @ (DBG) SC: LSPCON::setModeIfNecessary() DInfo: [FB2] The adapter is already running in Protocol Converter (DP++ to HDMI 2.0) mode. No need to update. igfx @ (DBG) SC: LSPCON::wakeUpNativeAUX() DInfo: [FB2] The native AUX channel is up. DPCD Rev = 0x12. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] Will call the original method. igfx @ (DBG) SC:     GetDPCDInfo() DInfo: [FB2] Returns 0x0. Additionally, you can find these properties injected by the driver under the corresponding framebuffer.
      (Only available in DEBUG version)
       
      fw-framebuffer-has-lspcon indicates whether the onboard LSPCON adapter exists or not.
      fw-framebuffer-preferred-lspcon-mode indicates the preferred adapter mode. 1 is PCON, and 0 is LS.
       
      Debug Output
      To get debug output from Lilu use the -liludbgall liludump=60 boot flags. You will need to compile Lilu and WhateverGreen as debug for both of these flags to work. Log files should be located at /var/log/Lilu_*.
       
      To view debug paste the following into Terminal (weglog.txt will output to your home directory):
      log show --predicate 'process == "kernel" AND (eventMessage CONTAINS "WhateverGreen" OR eventMessage CONTAINS "Lilu")' --style syslog --source --last boot >weglog.txt Getting Help

      To help the users of this forum diagnose issues with your configuration please generate a Lilu debug log and then run gen_debug.sh to generate a folder of debug files you can attach to a forum post requesting help.

      Credits
      - vit9696 and lvs1974 for WhateverGreen (Full Credits) and Lilu (Full Credits)
      - Andrey1970 for his guide on applelife.ru
      - RehabMan for all data patching method, ioreg framebuffer dump and other contributions
       


    • By Slice
      I successfully installed macOS 10.11.6 and Windows 7 Pro SP1 in UEFI mode on the laptop.
      I know, there are detailed guides here and on osxlatitude.com but I was not agree with them and carefully check and test every step to tune my Mac.
       
      Hardware
      Intel® Core� i5-3320M CPU @ 2.60GHz, speedstep works with Clover default settings
      Chipset Intel 7 series, no patches needed
      Video: IntelHD4000 or NVS5200M switchable in BIOS, work in both cases
      LAN; Intel 82579LM, works with IntelMausiEthernet.kext v2.2.1
      Audio: IDT 92HD93BXX, works with VoodooHDA 2.9.0.
      SDHC reader O2Micro; works with native AppleSDHC.kext with Clover Arbitrary properties.
      USB3.0 works natively if not disabled in DSDT
      PS2 keyboard and touchpad works with VoodooPS2.
      WiFi: Dell Intel WiFi was replaced by Dell DW1520, Broadcom BCM943224HMS. DeviceID=4353
      LCD Screen 1366x768
      BIOS A12. Initially was A02. Then I flashed A23 and found it is quite bad. The screen is full of artefacts. Flash A12 and all is OK. Not tested other versions.
      For some reason BIOS can switched from Intel to Nvidia by itself so I have to do my solution working independent on this state.
       
      WiFi
      It is not working OOB although it has DeviceID known to Apple. The reason is WhiteList in the driver.
      I set MacModel as MacBookPro10,1 while the WiFi will work on MacBookAir. I make a patch in Clover.
      As well a patch for channels.
      I deleted a kext Brcm4331 because it has the same DeviceID. Let kext Brcm4360 to work alone.
       
      VideoCards
      In Bios we can set Optimus = Enable/Disable
      If Enable then we have two videocards Intel first and Nvidia second. In this case additional SSDT-3.aml will switch off Nvidia.
      If Disable then we have only Nvidia card. It will work if Board-ID taken from iMac13,2.
      But here there is contradiction with WiFi with required Board-ID from MacBookAir.
      So I take MacModel as MacBookPro10,1 which is most close by CPU IvyBridge.
      Set BoardID like iMac13,2 to make Nvidia working.
      Patch BoardID in Brcm4360 to make WiFi working.
      Now I have
      Inject->
      ->Intel=YES
      ->Nvidia=YES
      and SSDT-3.aml in ACPI\patched folder. This SSDT will switch off Nvidia if Intel card ON.
      For Intel graphics there is a patch against 8 apples at start.
      This Nvidia 5200 is Fermi and works in ElCapitan.
       
      Brightness
      No special kexts.
      The brightness controlled by keys F1,F2 and slider in Control Panel in both case Intel or Nvidia. Details here  #72 
       
      DSDT and SSDT
      This is very long story and finally I have working sleep in both cases Intel or Nvidia.
       
      Sensors
      I use my HWSensors3 with FakeSMC 3.5.2.
      I got monitoring:
      CPU temperature
      GPU temperature
      GPU main frequency
      GPU shader frequency
      Battery state % full, time to charged or time to empty.
      Battery voltage dinamically.
      Battery amperage dynamically. I can see it changes on heavy games.
      HDD temperature.

       
      Audio
      I like VoodooHDA and have no problems with it.
      The sound is clear, loud, and switchable between internal speaker and headphone.
      Mic is working.
       
      Bluetooth
      Just tested with BTFirmwareUpdate.kext and it works in 10.11.6. I not needed it so switched off by wireless switch at right side.
      For 10.13.6 there is other kext BRCMInjector.
       
      Keyboard, Touchpad and Touchstick
      Post #14
      I made my fork of the VoodooPS2 driver, take here sources and release version
      https://github.com/SergeySlice/VoodooPS2-for-ALPS
       
      My config, ACPI files and kexts are in attachment.
      05.12.2017
      EFI.7z
       
      EDITED:
      Better DSDT in the post #6.
      Sleep working even when AC inserted.
       
      EDITED 06.12.2018
      Now I have HighSierra and this is my EFI folder. Note, HighSierra is possible only with Intel graphics (Optimus is enabled in BIOS)
       

       
       
      Welcome to discussion!
      EFI-E6430.7z
      BRCMInjector.kext.zip
    • By arsradu
      Hi guys,
       
      So, this little tutorial is meant to help people fix a new issue with Mojave: opening jpg files (looks like it happens with larger files, not so much with smaller ones) using Quick Look (on spacebar key pressed) or Preview app, using the dedicated GPUs.
      The issue is that, when trying to open jpg files (for some reason, it doesn't occur with pngs), the pop-up window would remain in an endless loop. And from that point forward, any other app trying to open the same file will either become unresponsive (in the case of the Preview app) or just stay in endless loop (in case of Quick Look)
       
      As a workaround, in case the tutorial below doesn't work for you, you can use Grab (built-in app in MacOS) to open said files.
       
      This issue DOES NOT occur using the iGPU. So...if you're comfortable using the iGPU, just switch to that and you should be good to go. You don't need this tutorial.
       
      This tutorial is based on @Cyberdevs' research and testing on this topic (especially useful if you're using an RX series AMD video card), and my own very limited time testing this on my rig. I just thought it would be useful to create a new thread for it so that people can discuss this particular issue here.

       
      With that being said, I'll just move on to the actual tutorial.
       
      New (probably better) method.
       
      Switch your SMBIOS in Clover config in regards to the dedicated GPU you're using, instead of the CPU. Take a look here and choose the corresponding SMBIOS closest to your hardware.
      Yeah, that's it.
       
      In case you lose CPU PM with this method, there are multiple ways to fix that, and they do not make the object of this thread.  It worked perfectly fine for me though and I didn't need to change anything else.
       
      Alternatively, you can also try one of the MacPro SMBIOSes, such as MacPro5,1 or MacPro6,1. It was tested multiple times and it showed good results. 
      Keep in mind that choosing these will most likely not show you an iGPU in System Report, since those machines generally (probably all of them) use Xeon CPUs with no iGPUs either.
       
      /!\NOTE: There have been reports saying that using this method (switching SMBIOS to a MacPro one) with newer versions of MacOS may cause iTunes to crash.
      So...keep that in mind and better try some of the other methods mentioned here.
       
      A simple Lilu plugin
       
      Thanks to vulgo for the plugin and @Matgen84 for sharing and testing it, we now have yet another possible solution to this issue. It's a Lilu plugin (which means that it requires Lilu.kext in order to work) it's called NoVPAJpeg, and it can be downloaded from here.
      You use it as a regular kext, alongside Lilu. I prefer (and recommend) using it within the EFI folder, in Clover/kexts/Other. But if you want to use it in S/L/E, that should work just fine.
       
      More info can be found in this post here.
       
      UPDATE:
       
      According to Vulgo, NoVPAJpeg.kext is now deprecated.
      In case its functionality is needed, use WhateverGreen.kext and add the following boot arguments:
      shikigva=32 shiki-id=Mac-7BA5B2D9E42DDD94 In case you wanna try alternative medicine  ...
       
      The main thing we need to do is actually very simple: we need to enable the iGPU (integrated GPU) by default, in BIOS, while actually being connected to the dedicated GPU.
       
      For ATI GPUs (curtesy of @Cyberdevs' post here).
       
      The discreet GPU should be set as primary in BIOS and your displays should be connected to your discreet GPU
      The iGD/iGPU/iGFX must be enabled in BIOS/UEFI as the secondary GPU.
       
      I removed the DSDT Reconfigured the config.plist to and removed some flags which weren't needed because of the DSDT added the InjectATI + Ornioco Framebuffer (I removed the Orinoco framebuffer because of some weird glitches but it might be useful for other AMD GPUs if you inject the correct framebuffer according to your GPU. No need to inject anything for nVidia GPUs unless your GPU needs it) Added the InjectIntel + ig-platform-id for my intel HD530 (for intel HD 530 I use the 0x19120001 ig-platform-id)  
      Steps 5 to 7 might not be necessary I just did them anyway, if anyone succeeded to get quicklook working without those steps let me know so I can exclude those steps.

           Also confirmed to work with AMD R9 270X on a SandyBridge rig (without an iGPU) using WhateverGreen + Lilu kexts, which also helped to solve the transparency issue along with the Quick Look problem, it also resolved the buggy Screen Capture (Command+Shift+5) issue as well. 
       
          Also, do:
      nvram cleanup kextcache & prelinked kernel rebuild reboot  More info on that here.
       
       
      For NVIDIA GPUs (tested on my old MSi GTX 650)
       
      This is what I needed for my NVIDIA GPU and the MSI motherboard in the signature (*since then, I upgraded my GPU to my current RX 580). Your milage may vary, depending on your hardware. But, the idea should be the same regardless.
       
         For MSi motherboads (check out my motherboard details in the signature)
       
      Set your BIOS to use PEG (dedicated GPU) so you can boot.
      Since you're reading this, chances are that you're already connected to the dedicated GPU and the BIOS is set to PEG. So just go into BIOS and see if you're using the iGPU or the dedicated (PEG) graphics device by default.
      If you're already using this, skip to Step 3 (the part AFTER Reboot). Reboot (I think you don't necessarily need to boot into the OS...but you do need to reboot at least until Clover UI) Reboot back into BIOS and set it from PEG to IGD (integrated graphics) WITHOUT removing the cable. Save Reboot again.  
         The result should be that the OS is tricked into thinking you're booting with the IGPU when in fact you're using the dedicated GPU.
       
         For Gigabyte motherboards
       
         Set:
      Peripherals -> Initial Display Output -> iGFX Chipset -> Internal Graphics -> Enabled
           DVMT Pre-Allocation -> default 64M.
           DVMT Total Gfx Mem -> default 256M Save Reboot  
         You should do this with the cable connected to the dedicated GPU.
       
      You will also need to patch the iGPU from Clover config.
      1. Graphics -> Inject Intel (UNCHECK Inject Nvidia or ATI if it's checked).
      2. ig-platform-id (in my case for Intel HD 4600 Desktop) it was: 0x0d220003
       
      And use IntelGraphicsFixup.kext (now included into WhateverGreen.kext) in Clover/kexts/Other. In my particular case, without the kext, I would get freezes in Safari.
       
      Another way to activate the iGPU while having the dGPU set as primary is by going into BIOS/SAG/Graphics Configuration/iGPU and setting Multi-Monitor to [Enabled], all the rest remains on [Auto], and set Inject/Intel to [True] in Clover config.*.
       
      Thanks to @gjw for the tip.
       
      *Motherboard dependent. But the multi-monitor option might be the same regardless of manufacturer.
       
       
      This might be a bug with Mojave and it could be fixed by Apple in the future. but in the meantime, feel free to use this if it helps you fix the issue.
       
      For HP motherboards (including laptops), so far no solution, unless the BIOS somehow allows to switch from dGPU to iGPU and vice-versa.
       
      Cheers!
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      *Use this folder with FULL DSDT PATCHED
      EFI CLOVER Z390 DESIGNARE.zip
       
      ---OPENCORE FOLDER---
      *Use this folder with FULL DSDT PATCHED
      EFI OPENCORE Z390 DESIGNARE.zip
       
      ---DSDT patch requests is here---
       
      https://olarila.com/forum/viewtopic.php?f=19&t=1131
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By fantomas1
      First beta... macOS Catalina 10.15 beta (19A471t)  Release Notes!!!
       
      Useful information:
       
      macOSDeveloperBetaAccessUtility.dmg.zip (thanks to gengik84)
      Clover r4945 (thanks to Cyberdevs)
      Lilu_plugins (thanks to gengik84)
      Port Limit Patch (thanks to daliansky)
      older non metal nVidia and Intel cards (thanks to fusion71au)
      MBR installation on macOS Catalina (thanks to crazybirdy) - workaround!!!
      Mac Downloader (thanks to ricoc90)
      Stuck boot in Beta 5 (thanks to MaLd0n)
       
×