Jump to content

1,347 posts in this topic

Recommended Posts

This Post is for helping users with issue that come with Whatevergreen

Feel free to join in and help users if you know your stuff
also get the dev's of whatever green to join as well


Whatevergreen has a few issues

Multi-monitor Support is lacking as 2 monitors seems to be the limit for some even if the devs say it's not users say it's true

Some Id's are wrong or missing (hence the nano and 390X not working)

some GPU names are wrong ( which has been reported many times)

FOR RYZEN OWNERS with Polaris :

Modified kext:/S/L/E/AMD9510Controller.kext//Contents/Info.plistfrom:<key>IOPCIMatch</key><string>0x67EF1002</string>to:<key>IOPCIMatch</key><string>0x67FF1002</string> Updating clover to Clover_v2.4k_r4152 and using the config.plist here https://pastebin.com/TYiTEVcMwithbusratio=36 and npci=0x3000 

ALSO THIS THREAD IS NOT FOR WHINING in anyway please do not post off topic if you don't like given support in this forum that's all you but majority of use need it.

 

Source code: repository.
FAQ and documentation: link.

 

a real SSDT example https://www.dropbox.com/sh/el66izg1lmk1jiu/AADCZUEjyQyiWWELlmzW2ix-a?dl=0 Credits to Pavo for the hard work of decoding the mess

Boot argumentsAdd -raddbg to enable debug printing (available in DEBUG binaries).Add -radvesa to disable ATI/AMD video acceleration completely.Add -radoff to disable WhateverGreen.Add -radbeta to enable WhateverGreen on unsupported os versions (10.13 and below are enabled by default).Add -rad24 to enforce 24-bit display mode.Add -radlogo to patch boot logo distortion.Add -raddvi to enable DVI transmitter correction (required for 290X, 370, etc.)Add radpg=15 to disable several power-gating modes (see FAQ, required for 7xxx GPUs).

If you Don't Want To use WEG or LILU clover 4297 has a new patch that fixes the same issues without kexts 

You have to set in config.plist <key>Graphics</key> <dict> <key>RadeonDeInit</key> <true/>

Share this post


Link to post
Share on other sites
Advertisement

1. Multi-monitor Support is lacking and some what buggy

 

2. Some Id's are wrong or missing

 

3. some Gpu names are wrong 

 

4. and some gpu's like the nano or 390x does not work when they should.

 

1. Everything works like it should. How to avoid problems with R9 290X described in FAQ. Try "connectors", "connector-count" and "connector-priority"

  • When and how should I use custom connectors?

    In general automatic controller detection written in Apple kexts creates perfect connectors from your VBIOS. The logic of that can be found in reference.cpp. However, some GPU makers physically create different connectors but leave the VBIOS unchanged. This results in invalid connectors that are incompatible with your GPU. The proper way to fix the issues is to correct the data in VBIOS, however, just providing custom connectors can be easier.

    For some GPUs (e.g. 290, 290X and probably some others) WhateverGreen incorporates automatic connector correction that can be enabled via -raddvi boot argument. For other GPUs you may specify them as a GPU device property called connects, for example, via SSDT. You could pass your connectors in either 24-byte or 16-byte format, they will be automatically adapted to the running system. If you need to provide more or less connectors than it is detected automatically, you are to specify connector-count property as well. Please note that automatically detected connectors appear in the debug log to give you a good start.

  • How can I change display priority?

    With 7xxx GPUs or newer you could simply add connector-priority GPU controller property with sense ids (could be seen in debug log) in the order of their importance. This property may help with black screen issues especially with the multi-monitor configurations.

    Without this property specified all the connectors will stay with 0 priority. If there are unspecified connectors they will be ordered by type: LVDS, DVI, HDMI, DP, VGA. Read SSDT sample for more details.

2. What ID's are wrong or missing? WhateverGreen doesn't have fake-id option! So if device-id of your card is missing in vanilla AMD kexts you have to inject fake id with SSDT or Arbitrary array in config.plist

 

3. Once again read the FAQ. 

All the questions about automatic GPU model detection correctness should be addressed to The PCI ID Repository. In special cases you may submit a patch for kern_model.cpp. GPU model name is absolutely unimportant for GPU functioning.

 

4. Read the first paragraph

Share this post


Link to post
Share on other sites

1. Everything works like it should. How to avoid problems with R9 290X described in FAQ. Try "connectors", "connector-count" and "connector-priority"

 

saying it without having a example doesnt help your faq page doesnt help it can't it lacks so much info im sorry best to make it more full of information instead of try this and that without showing how and if you can't give support for your plugin why bother making it at all ? you don't just post a plugin and a useless faq pages and hope for the best

Share this post


Link to post
Share on other sites

saying it without having a example doesnt help your faq page doesnt help it can't it lacks so much info im sorry best to make it more full of information instead of try this and that without showing how and if you can't give support for your plugin why bother making it at all ? you don't just post a plugin and a useless faq pages and hope for the best

 

How?

Open SSDT sample and read notes... 

Share this post


Link to post
Share on other sites

How?

Open SSDT sample and read notes... 

it's messy and not going to help a new user not eveyone is a magic SSDt patcher most on this forum can't do it even hack pro's you need to find a better way of showing how things work and what to try to fix any issue less messy way a good way

Share this post


Link to post
Share on other sites

How?

Open SSDT sample and read notes...

 

This is a great advancement for AMD cards, it works great on my Intel i3 7350k, i5 6500, and pentium G3258 Haswel with RX 460 and RX 480.

 

It even works on my Ryzen 7 1700 with RX 480 but only in Sierra 12.5. In Sierra 12.5 I edit the info.plist of 9510 and 4100 kexts. I am able to boot with only RX 480 and no helper card.

 

In Sierra 12.6 there is no need to edit the kexts but it boots to black screen. The card accelerates at boot and I know it's booted but only black screen ( like days of old). With a Nvidia GT210 as a helper card it boots and shows the AMD Radeon Pro 480/575 so I know WhateverGreen is working.

 

Any ideas on why it won't work for Ryzen in Sierra 12.6?

Share this post


Link to post
Share on other sites

Is it possible to get the correct Frambuffer when using atribute "connectors" ?

right now it will allways be RadeonFramebuffer, but under old conditions we where able to choose different Frambuffers.

This weekend i tried the attribute "Connectors" by supplying it through my SSDT as in the sample SSDT it was adviced.

But it still shows AMD,RadeonFramebuffer as chosen framebuffer instead of "Orinoco", which i prefere to use.

 

Never the less: the kext is working great and as expected. No iGPU in BIOS activated and i have full 8-channel sound via HDMI of my Sapphire RX480 Nitro.

My question ist only a "cosmetic" question. I will explain in more details when i am back home and able to provide my SSDT with this post.

Share this post


Link to post
Share on other sites

This is a great advancement for AMD cards, it works great on my Intel i3 7350k, i5 6500, and pentium G3258 Haswel with RX 460 and RX 480.

 

It even works on my Ryzen 7 1700 with RX 480 but only in Sierra 12.5. In Sierra 12.5 I edit the info.plist of 9510 and 4100 kexts. I am able to boot with only RX 480 and no helper card.

 

In Sierra 12.6 there is no need to edit the kexts but it boots to black screen. The card accelerates at boot and I know it's booted but only black screen ( like days of old). With a Nvidia GT210 as a helper card it boots and shows the AMD Radeon Pro 480/575 so I know WhateverGreen is working.

 

Any ideas on why it won't work for Ryzen in Sierra 12.6?

 

Well interresting :

 

I have a simmilary build with Haswell Celeron and rx 460 :

 

I have spend lot of time this week end and unable to boot with PEG in bios.

 

Please may you upload your config.plist it will perhaps  helpfull for me.

Share this post


Link to post
Share on other sites

Is it possible to get the correct Frambuffer when using atribute "connectors" ?

right now it will allways be RadeonFramebuffer, but under old conditions we where able to choose different Frambuffers.

This weekend i tried the attribute "Connectors" by supplying it through my SSDT as in the sample SSDT it was adviced.

But it still shows AMD,RadeonFramebuffer as chosen framebuffer instead of "Orinoco", which i prefere to use.

 

Never the less: the kext is working great and as expected. No iGPU in BIOS activated and i have full 8-channel sound via HDMI of my Sapphire RX480 Nitro.

My question ist only a "cosmetic" question. I will explain in more details when i am back home and able to provide my SSDT with this post.

 

See the FAQ about named framebuffer. Custom connectors for Polaris are useless. Autodetect works fine with this cards.

  • When should I use a named framebuffer?

    Named framebuffers (Baladi, Futomaki, Lotus, etc.), enabled by "Clover GPU injection" or any other methods should never ever be used. This way of GPU injection is a common mistake, preventing automatic configuration of various important GPU parameters. This will inavoidably lead to borked GPU functioning in quite a number of cases.

It even works on my Ryzen 7 1700 with RX 480 but only in Sierra 12.5. In Sierra 12.5 I edit the info.plist of 9510 and 4100 kexts. I am able to boot with only RX 480 and no helper card.

 

In Sierra 12.6 there is no need to edit the kexts but it boots to black screen. The card accelerates at boot and I know it's booted but only black screen ( like days of old). With a Nvidia GT210 as a helper card it boots and shows the AMD Radeon Pro 480/575 so I know WhateverGreen is working.

 

Any ideas on why it won't work for Ryzen in Sierra 12.6?

 

I think it it is Ryzen kernel issue. 

Share this post


Link to post
Share on other sites

How?

Open SSDT sample and read notes... 

 

Referring to people to FAQ's all the time is not always helpful.

Not all people have the same level of expertise as Devs.

 

@vit9696 and others have a done a fantastic job in finding the solution of getting AMD cards to work but since it's closed-source solution, Devs should be more open to helping people solve their specific problems. Saying everything works does not help the person who is having problems.

 

If people say, "it does not work" then Devs should say "...ok, please post you debug, config.plist, or whatever I need to help you solve your problem" instead of saying "see the FAQ".

Yes it may be a "user problem" but if the user is not as an expert as the Dev, then don't assume that they can read the FAQ and solve the problem on their own.

E.g. the FAQ mentions Connectors and in the SSDT example, there's a Connectors section that is just a bunch of numbers...:

"connectors",
                        Buffer ()
                        {
                            0x00, 0x04, 0x00, 0x00, 0x04, 0x03, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x12, 0x04, 0x04, 0x01, 
                            0x00, 0x08, 0x00, 0x00, 0x04, 0x02, 0x00, 0x00, 0x00, 0x01, 0x02, 0x00, 0x22, 0x05, 0x01, 0x03, 
                            0x04, 0x00, 0x00, 0x00, 0x14, 0x02, 0x00, 0x00, 0x00, 0x01, 0x03, 0x00, 0x10, 0x00, 0x05, 0x06, 
                            0x04, 0x00, 0x00, 0x00, 0x14, 0x02, 0x00, 0x00, 0x00, 0x01, 0x04, 0x00, 0x11, 0x02, 0x06, 0x05
                        },

...and there's no help in that example as to what these numbers are and how to change them.

By the way, that SSDT example is very well documented compared to many others I've seen in 8 years of hacking (but clearly it's not enough).

 

People are not asking for "free fish" but "teach me how to fish, so that I can feed my self".

 

Keep up the good work.

Share this post


Link to post
Share on other sites

Referring to people to FAQ's all the time is not always helpful.

Not all people have the same level of expertise as Devs.

 

@vit9696 and others have a done a fantastic job in finding the solution of getting AMD cards to work but since it's closed-source solution, Devs should be more open to helping people solve their specific problems. Saying everything works does not help the person who is having problems.

 

If people say, "it does not work" then Devs should say "...ok, please post you debug, config.plist, or whatever I need to help you solve your problem" instead of saying "see the FAQ".

Yes it may be a "user problem" but if the user is not as an expert as the Dev, then don't assume that they can read the FAQ and solve the problem on their own.

E.g. the FAQ mentions Connectors and in the SSDT example, there's a Connectors section that is just a bunch of numbers...:

"connectors",
                        Buffer ()
                        {
                            0x00, 0x04, 0x00, 0x00, 0x04, 0x03, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x12, 0x04, 0x04, 0x01, 
                            0x00, 0x08, 0x00, 0x00, 0x04, 0x02, 0x00, 0x00, 0x00, 0x01, 0x02, 0x00, 0x22, 0x05, 0x01, 0x03, 
                            0x04, 0x00, 0x00, 0x00, 0x14, 0x02, 0x00, 0x00, 0x00, 0x01, 0x03, 0x00, 0x10, 0x00, 0x05, 0x06, 
                            0x04, 0x00, 0x00, 0x00, 0x14, 0x02, 0x00, 0x00, 0x00, 0x01, 0x04, 0x00, 0x11, 0x02, 0x06, 0x05
                        },

...and there's no help in that example as to what these numbers are and how to change them.

By the way, that SSDT example is very well documented compared to many others I've seen in 8 years of hacking (but clearly it's not enough).

 

People are not asking for "free fish" but "teach me how to fish, so that I can feed my self".

 

Keep up the good work.

it's like talking to a brick wall when you tell him that 

Share this post


Link to post
Share on other sites

Has anyone gotten the gigabyte radeon rx 560 to work with a ryzen build? I am booting 12.5 and having no such luck getting acceleration. I am willing to do hex edits or whatever is needed but as of now I am just running in circles!

Share this post


Link to post
Share on other sites

This is exactly like the normal connector patching done previously, just in a SSDT format. 

"connectors",
                        Buffer ()
                        {
                            0x00, 0x04, 0x00, 0x00, 0x04, 0x03, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x12, 0x04, 0x04, 0x01, 
                            0x00, 0x08, 0x00, 0x00, 0x04, 0x02, 0x00, 0x00, 0x00, 0x01, 0x02, 0x00, 0x22, 0x05, 0x01, 0x03, 
                            0x04, 0x00, 0x00, 0x00, 0x14, 0x02, 0x00, 0x00, 0x00, 0x01, 0x03, 0x00, 0x10, 0x00, 0x05, 0x06, 
                            0x04, 0x00, 0x00, 0x00, 0x14, 0x02, 0x00, 0x00, 0x00, 0x01, 0x04, 0x00, 0x11, 0x02, 0x06, 0x05
                        },

Share this post


Link to post
Share on other sites

 

This is exactly like the normal connector patching done previously, just in a SSDT format.

"connectors",
                        Buffer ()
                        {
                            0x00, 0x04, 0x00, 0x00, 0x04, 0x03, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x12, 0x04, 0x04, 0x01, 
                            0x00, 0x08, 0x00, 0x00, 0x04, 0x02, 0x00, 0x00, 0x00, 0x01, 0x02, 0x00, 0x22, 0x05, 0x01, 0x03, 
                            0x04, 0x00, 0x00, 0x00, 0x14, 0x02, 0x00, 0x00, 0x00, 0x01, 0x03, 0x00, 0x10, 0x00, 0x05, 0x06, 
                            0x04, 0x00, 0x00, 0x00, 0x14, 0x02, 0x00, 0x00, 0x00, 0x01, 0x04, 0x00, 0x11, 0x02, 0x06, 0x05
                        },
how is your progress so far ?

Share this post


Link to post
Share on other sites

 

This is exactly like the normal connector patching done previously, just in a SSDT format. 

"connectors",
                        Buffer ()
                        {
                            0x00, 0x04, 0x00, 0x00, 0x04, 0x03, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x12, 0x04, 0x04, 0x01, 
                            0x00, 0x08, 0x00, 0x00, 0x04, 0x02, 0x00, 0x00, 0x00, 0x01, 0x02, 0x00, 0x22, 0x05, 0x01, 0x03, 
                            0x04, 0x00, 0x00, 0x00, 0x14, 0x02, 0x00, 0x00, 0x00, 0x01, 0x03, 0x00, 0x10, 0x00, 0x05, 0x06, 
                            0x04, 0x00, 0x00, 0x00, 0x14, 0x02, 0x00, 0x00, 0x00, 0x01, 0x04, 0x00, 0x11, 0x02, 0x06, 0x05
                        },

 

Yes it may be but if people have never had to deal with connector patching before (e.g. they are moving from nVidia to AMD) then it's of no help.

They will need to go off somewhere else google AMD connector patching and hope they figure out the old-way with SSDT-way.

If it was documented within the FAQ (or better within the SSDT), then all info is in one place.

Share this post


Link to post
Share on other sites

Just noticed they got the port count wrong on the 290x since the dp port counts as 3 and dvi dvi and HDMI count as another 3 wth they doing to get 4 ? Gimping 2 other ports would cause issues

Share this post


Link to post
Share on other sites

Has anyone gotten the gigabyte radeon rx 560 to work with a ryzen build? I am booting 12.5 and having no such luck getting acceleration. I am willing to do hex edits or whatever is needed but as of now I am just running in circles!

In your config.plist

System Parameters -> Inject Kexts -> Yes

Rt Variables -> CsrActiveConfig -> 0x67

Make sure your not injecting anything since the RX560 seems to use the same ID as the RX460.

Please also make sure your using the latest version of Clover since last night I spent like 7 hours helping a friend but then at the end noticed... he was using a outdated version of Clover after updating it started working.

Share this post


Link to post
Share on other sites

In your config.plist

System Parameters -> Inject Kexts -> Yes

Rt Variables -> CsrActiveConfig -> 0x67

Make sure your not injecting anything since the RX560 seems to use the same ID as the RX460.

Please also make sure your using the latest version of Clover since last night I spent like 7 hours helping a friend but then at the end noticed... he was using a outdated version of Clover after updating it started working.

I am going to use the latest version of Clover_v2.4k_r4128

I have the 0x67 command issued.

 

I am using a ryzen cpu with 10.12.6

 

If I cannot get the RX 560 to work on the Ryzen I will try it on the Z77

 

UPDATE! I GOT THIS RX 560 to WORK in my Z77X setup running 10.12.6! All I did was set inject kexts to yes, Rt variables to 0x67, and place the Kexts in the EFI kext folder! Wa-la! atleast she is not a paper weight. I will now try to do an install on the AMD.

Share this post


Link to post
Share on other sites

Rt Variables -> CsrActiveConfig -> 0x67

 

in sierra fully disabled sip is 0x1FF, highsierra 0x3FF

anyway, check for correct settings on boot clover->options....Sys.Par.

4128+

Share this post


Link to post
Share on other sites

Well interresting :

 

I have a simmilary build with Haswell Celeron and rx 460 :

 

I have spend lot of time this week end and unable to boot with PEG in bios.

 

Please may you upload your config.plist it will perhaps  helpfull for me.

 

Heres my EFI folder.   You will need to add serial number, UUID, and MLB, and I removed the Themes folder.   I also added the lilugreen kexts to System/Library/Extensions folder.

 

EFI.zip

Share this post


Link to post
Share on other sites

Well, if someone can explain - or a link -  to get connectors, and how to create with this connectors an ssdt - or a link - for this kext, I really appreciate the help.

 

I have an Amd 390x

 

thank you.

Share this post


Link to post
Share on other sites

Heres my EFI folder.   You will need to add serial number, UUID, and MLB, and I removed the Themes folder.   I also added the lilugreen kexts to System/Library/Extensions folder.

 

attachicon.gifEFI.zip

 

Thanks :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tonyx86
      This guide is a work in progress and will be updated as I refine the installation.
       
      Background
      This is my first "modern" hack supporting UEFI and my first hack using Clover "on-the-fly" patches.  My previous hacks
       
      Laptop: Thinkpad T61 / Nvidia NVS 140m Laptop: Dell Latitude E6410 / Nvidia G3100m Desktop: Gigabyte G31 / GeForce 9600 Desktop: Biostar TH55HD / Sapphire Pulse RX580 (Google "Catalina Biostar TH55HD" and look for user name deeveedee)  
      are all perfectly running Catalina and I patched them all "manually" - all DSDT patches applied with MaciSL with virtually no Clover on-the-fly patching and all booted Legacy Clover.  This UEFI hack was MUCH easier and took about 20 hours vs. a combined hundreds of hours for the old hacks.  I wanted a hack that was a little more future proof and I think this is it.  I hope you enjoy this as much as I am enjoying it.  It is a perfect MacMini8,1.
       
      My system specs
      HP EliteDesk 800 G4 Mini (I7-8700T / UHD 630 / Q370 Chipset / 32GB DDR4 RAM) 3 x DP Ports (connected to monitors using DP -> DVI adapters) 6 x USB 3.1 1 x USB Type-C 3.1 2 x NVMe SSD (M.2 PCIe x4 2280/2230 combo ports) 1 x SATA6 SSD 1 x Intel Ethernet RJ-45 Conexant CX20632 Audio Codec SMBIOS MacModel MacMini 8,1 Unsupported M.2 PCIe x1 2230 Intel Wi-Fi (currently disabled in BIOS).  I may replace this with Brcm, but am using only Ethernet (IntelMausi) for now.  
      Installation Steps: To be provided
      See attached EFI and /L/E kexts in EliteDesk.zip archive See installation methodology here See references here  
      What is not working
      Wi-Fi / Bluetooth (intentional since I have not yet replaced my Intel card).  
      What is not tested
      USB c 3.1 port Microphone port  
      What is working
      Everything not mentioned above Sleep / Wake Multiple displays with IGPU graphics acceleration, hot pluggable display ports and DP->DVI adapters USB 3.1 ports Audio (internal speaker and headphone jack) Ethernet Auto-sensing headphone jack automatically switches to internal speaker when headphones removed  
      Known Issues and their solutions
      (Solved. Cycle power on the new display) A new display may not be detected if the new display is plugged into an unused display port while the HP EliteDesk 800 G4 Mini is sleeping. Solution is to cycle power on the new display after waking the EliteDesk 800 G4 Mini. Cycling display power on the newly added display causes displays to be re-detected. (Solved. Problem resolves itself after a few boot cycles) After applying the Catalina 10.15.5.02 supplemental update, Catalina booted to a single display.  After a few boot cycles, multi-display operation was restored to normal. (Solved and included in the attached EliteDesk.zip archive) Unable to upgrade from 10.15.4 to 10.15.5 when using IntelMausiEthernet.kext.  Solution is to switch to IntelMausi.kext (Rev 1.0.2 here). (Solved and included in the attached EliteDesk.zip archive) Some USB devices were not recognized. My SSDT-UIAC.aml was incomplete and did not specify all required USB port types (missing SSxx ports). The attached EliteDesk.zip archive includes this fix. (Reported this as a possible Clover issue - no solution yet) Clover boot loader may default to Recovery volume after a normal shutdown.  Work-around is to select your normal macOS volume.  This may only happen when Clover is configured to boot LastBootedVolume and may be "fixable" by explicitly setting a boot volume (haven't tested this). (No longer observed) At least one display blanks (sleeps) when plugging / unplugging USB device (observed in front USB 3.1 ports).  Display wakes immediately on keyboard and mouse activity, so this is a minor issue but may be indicative of another issue. (Solved - this is a BIOS setting and requires no macOS changes) Safari has problems loading insanelymac web pages after sleep / wake.  I suspect that the problem is with the embedded video on the pages.  Also observed video problem in AppStore after sleep/wake.  Console: VideoDecodersUnavailable.  Solution is to enable Intel ME in BIOS. (Solved and included in the attached EliteDesk.zip archive) Display does not fully wake after resuming from sleep (needs an extra mouse or keyboard stimulus to fully wake).  Solution is to change boot arg darkwake=0 to darkwake=2.  Other values of darkwake may work as well, but this is the first I tried and it worked. (Solved and included in the attached EliteDesk.zip archive) -disablegfxfirmware boot arg is not required with WEG.  I inadvertently left this boot arg after I encountered an endless gfx firmware update boot loop while working on my FB patching.  This boot arg is no longer necessary after completing FB patching with WEG. (Solved and included in the attached EliteDesk.zip archive): Sometimes, CMOS time is lost on shutdown or restart.  Solution is to enable Clover's Apple RTC fix in config.plist. (Solved and included in the attached EliteDesk.zip archive) headphone jack doesn't work.  Solution is to change HDEF layout-id to 28. (Solved and included in the attached EliteDesk.zip archive) System freezes on wake from sleep because of a kernel panic related to hda-gfx (my system does not have HDMI and my DP->DVI adapters do not drive monitor speakers).  Solution is to add No-hda-gfx property to HDEF as described here.  This property is recognized as a Lilu flag and prevents loading hda-gfx. (Solved and included in the attached EliteDesk.zip archive) Device (PMCR) is not defined.  Solution is a SSDT that "injects" the missing device. (Solved and included in the attached archive) eficheck is loaded (not sure why this is bad, but may be a privacy issue - see here). Solution is to add updated EFICheckDisabler kext that include Q370 chipset.  See here.  
      BIOS Version / Configuration: To be provided
      Version: 02.11.01 Rev.A Intel ME must be enabled for proper sleep / wake of UHD 630
       
      Clover Configuration
      Clover for UEFI booting only Install Clover in the ESP UEFI Drivers Recommended drivers AudioDxe DataHubDxe FSInject SMCHelper File System drivers ApfsDriverLoader VBoxHfs Memory fix drivers AptioMemoryFix Additional drivers NvmExpressDxe Install RC scripts on target volume Themes Choose your desired theme Install Clover Preference Pane (option not available when installing on USB thumb drive)  
      UHD 630 Framebuffer Patching: To be provided
       
      Current Versions
      Catalina 10.15.5.02 Clover (UEFI) r5119 Lilu.kext 1.4.5 WhateverGreen.kext 1.4.0 AppleALC.kext 1.5.0 IntelMausi 1.0.3 (Not IntelMausiEthernet)  
      Credits To be provided
       
       







      EliteDesk800 G4 Mini - Rev 0.82.zip
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
      -Donations with PicPay 
      @danielnmaldonado
      -Donation with Mercado Livre 
      https://tinyurl.com/y9evkj5u
       
      -EFI OpenCore Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition in your USB STICK
      https://tinyurl.com/ybwr9kq3
       
      -Tutorial
      https://tinyurl.com/re2c9sz
       
      -Post Installation
      Paste EFI folder into EFI Partition in your SSD, reboot and extract one full dump with this app and post here!
      https://tinyurl.com/ybwr9kq3
      RunMe.app
      https://tinyurl.com/y9562hz7
       
      --DSDT PATCHES--
       
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM -REAL TIME CLOCK -SLPB -DARWIN / WINDOWS -XHCI -PLUGIN TYPE -HDEF -ARTC -IPIC -TIMR -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -kUSBCompanionIndex -io-device-location -IMEI -EC -PNLF -ARPT -GFX0 -NVME -ACPI-WAKE-GPE -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--
       









































       
       
      Big Thanks to XLR and your Badass Motherboard, Ultrafast CPU, Coolest Heatsink, Huge Graphics Card, Tonnes of RAM,
      Gigantic Hard Drive, Lightspeed Disk Burner, Professional Sound Card, Massive LCD Display.
       
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, headkaze, onemanosx, erroruser, Jenny David, Sampath007, Facebook Hackintosh community, Facebook Olarila community, SchmockLord, daliansky and many, many, many others!
       
      We're all here to have fun and learn from each other!
    • By fantomas
      macOS Catalina 10.15.6 beta (19G36e)
    • By mavifree
      Sir 
       
      I am new in Hackintosh and i try to make my hp laptop a hackintosh but am not able to boot in Installation menu i don't know why please help as am new in hackintosh world so i really need your help if some can. I really be very thankful to you. Please Help me.
       
      installation stuck at (Please go to https://panic.apple.com to report this panic)
       
      MY Laptop Specs :
       
      --------------------------------------------------------------------
      Laptop : HP cs2082tx
      Mobo : HP84C1
      Southbridge : Coffee Lake-U/Y PCH
      CPU : Intel Core i5 8265U @ 1.60GHz Kaby Lake- U/Y
      Ram : 8 Gb
      HDD : 256GB SSD & 1TB HDD
      Graphics : Intel UHD Graphic 620 with nvidia MX250
      ----------------------------------------------------------------------
       
      And here is the screenshot attachment and my EFI folder:
       


      Clover.rar
×