Jump to content
Gigamaxx

AMD High Sierra Kernel Release and Testing

1,117 posts in this topic

Recommended Posts

Need to be fresh install necessarily? Gigamaxx.
I have Sierra. I can just install over it? Back-up is so annoying.

PS. I will make a full copy of the SSD on Clonezilla as a precaution.

 

Cheers.

Share this post


Link to post
Share on other sites
Advertisement

Need to be fresh install necessarily? Gigamaxx.

I have Sierra. I can just install over it? Back-up is so annoying.

 

PS. I will make a full copy of the SSD on Clonezilla as a precaution.

 

Cheers.

 

No, I have installed on a few existing build drives for Intel.   Its just cleaner to instal on fresh copy but not necessary.

Share this post


Link to post
Share on other sites

POkJN7.png

 

| AMD Ryzen 3 - 1200 | MSI A320M PRO-VH PLUS | CORSAIR 8GB Vengeance RED DDR4 2400MHz XMP 2.0 CL16 | Gigabyte Nvidia GT1030 GDDR5 | OCZ 240GB TL100 Series 240GB SSD Sata 3.0 | Seagate 2.5" 500GB HDD Barracuda Sata 3.0 128MB Cache 5400Rpm | macOS High Sierra 10.13 | macOS Sierra 10.12.6 | Windows 10 Pro x64 |

Share this post


Link to post
Share on other sites

So Giga, i added all the stuff to a new installation with updated clover and updates whatever and lilu. whats next? 

 

It says "This Version of Macosx is not supportet by your system" i will now edit the plist with macpro 6.1

 

Update: Kernel Cache again... wtf.. why? 

 

Edit 2: Done it all again - kernel cache error again

Share this post


Link to post
Share on other sites

I think its your kernel bronya (the ryzen one) 

 

On page 12 i posted photos of the error 

 

This  #239 ??

I no see kernel cache error ... Where ??

Please reinstall 10.13 and install kexts :

FakeSMC, AppleATIATA.kext,DummyUSBEHCIPCI.kext,DummyUSBXHCIPCI.kext,GenericUSBXHCI.kext,NullCPUPowerManagement.kext,VoodooHDA.kext ! 

And repair permissions !

And TRY ! 

Share this post


Link to post
Share on other sites

Hi! 

 

Thanks for the kernel, good work! Although sometimes it starts again randomly!

I have not yet come to know when and why.
macOS High Sierra works with Gigabyte RX 460 4 GB without auxiliary card! (Lilu.kext and WhateverGreen.kext)
Works with HDMI port and Displayport too! (I guess thanks to AppleALC.kext) HDMIAudio.kext
Testing in progress!
 
post-1166679-0-97222400-1507736954_thumb.png
 
post-1166679-0-85574700-1507737001_thumb.png
 
Geekbench CPU Result (That could be better): https://browser.geekbench.com/v4/cpu/4410138

Share this post


Link to post
Share on other sites

I got spam of AppleAHCI..Control. (Try Boot to Installer). Try Clover / Enoch the same problem. Don't use any of kext but try with... try different boot flag still nothing. 

Share this post


Link to post
Share on other sites

I got spam of AppleAHCI..Control. (Try Boot to Installer). Try Clover / Enoch the same problem. Don't use any of kext but try with... try different boot flag still nothing.

 

Check bios settings HXCI enabled, and Sata AHCI mode.

So Giga, i added all the stuff to a new installation with updated clover and updates whatever and lilu. whats next? 

 

It says "This Version of Macosx is not supportet by your system" i will now edit the plist with macpro 6.1

 

Update: Kernel Cache again... wtf.. why? 

 

Edit 2: Done it all again - kernel cache error again

Ca you post your config.plist?

Hi! 

 

Thanks for the kernel, good work! Although sometimes it starts again randomly!

I have not yet come to know when and why.

macOS High Sierra works with Gigabyte RX 460 4 GB without auxiliary card! (Lilu.kext and WhateverGreen.kext)

Works with HDMI port and Displayport too! (I guess thanks to AppleALC.kext)

Testing in progress!

 

attachicon.gifKépernyőfotó 2017-10-11 - 17.38.58.png

 

attachicon.gifKépernyőfotó 2017-10-11 - 17.49.41.png

 

Geekbench CPU Result (That could be better): https://browser.geekbench.com/v4/cpu/4410138

Geekbench GPU Result: https://browser.geekbench.com/v4/compute/1233664

Try downloading and running “kext utility” app. After it’s booted. It works better than kext wizzard but only allows rebuild on working disk.

Share this post


Link to post
Share on other sites

Check bios settings HXCI enabled, and Sata AHCI mode.

 

Ca you post your config.plist?

 

Try downloading and running “kext utility” app. After it’s booted. It works better than kext wizzard but only allows rebuild on working disk.

 

I use Enoch bootloader because the Clover bootloader only works on the monitor (Displayport)! TV is not (HDMI).
It could be Clover r2230! I'll try the newer version!
 
Attached to config.plist:

Share this post


Link to post
Share on other sites

I use Enoch bootloader because the Clover bootloader only works on the monitor (Displayport)! TV is not (HDMI).

It could be Clover r2230! I'll try the newer version!

It could be the clover settings, clover has much more adjustments available than Enoch. In graphics try setting dual link to 1, and in GUI set screen resolution.

Share this post


Link to post
Share on other sites

Check bios settings HXCI enabled, and Sata AHCI mode.

 

Ca you post your config.plist?

 

Try downloading and running “kext utility” app. After it’s booted. It works better than kext wizzard but only allows rebuild on working disk.

 

 

I have Enable all of this. I try install with that method :

 

 

installing highsirera with the original BaseSystem

 

1 download the high sierra installer on Apple Store 

 

2 instal on your usb with this command

sudo /Applications/Install\ macOS\ High\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/usb

 

3 take one prelinkedkernel of one cheated highsierra amd installed

 

http://www85.zippyshare.com/v/n0n2aHIe/file.html

 

4 put your prelinkedkernel on

./IABootFile/

/System/Library/PrelinkedKernels/

 

5 install clover and reboot for enter in the installer

 

6 install the high sierra 

 

7 enter in Sierra for edit the second part of installation

 

8 copy your prelinkedkernel for /Macos Install data/Locked Files/Boot Files/

 

9 edit the file /Macos Install data/Locked Files/Boot Files/com.apple.Boot.plist

<key>Kernel Flags</key>

<string>-rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/BaseSystem.dmg</string>

 

for

 

<key>Kernel Flags</key>

<string>-rootdmg-ramdisk root-dmg=file:///macOS%20Install%20Data/BaseSystem.dmg</string>

 

10 reboot your system and return the installation

 

11 enjoy with the HighSierra

 

 

PS

in the part 10  

on the first boot error and reboot

on the second boot my NVIDIA gave black screen

on the third boot the HS installed normal

 

 

 

I'm stuck on 6 part. AppleUSBAHCI Loop. 

 

EDIT: AppleUSBHost:HardwareExpectionThreadCallGated

(idk maybe 6 - 8 lines in 1 s)

and another is AppleUSBEHCI something with recovery... 2 lines.

And thats messages going all the time. 

Share this post


Link to post
Share on other sites

I have Enable all of this. I try install with that method :

 

 

 

 

I'm stuck on 6 part. AppleUSBAHCI Loop. 

 

EDIT: AppleUSBHost:HardwareExpectionThreadCallGated

(idk maybe 6 - 8 lines in 1 s)

and another is AppleUSBEHCI something with recovery... 2 lines.

And thats messages going all the time. 

 

u need these usb kexts 

http://www.insanelymac.com/forum/topic/325514-amd-high-sierra-kernel-release-and-testing/?p=2510264

 

Share this post


Link to post
Share on other sites

For those having trouble check to see if you have a EFI Backup folder on main partition and remove it.   If it has a different config.plist or other kexts they may create problems for booting.

 

post-1753549-0-45721200-1507746355_thumb.png

 

 

For placement of the recommended USB and other kexts they go in your EFI partition in Clover Kexts folder Other.    There are also Clover settings for USB that may help.    I'm using High Current for USB 3.1.

 

post-1753549-0-45961900-1507746450_thumb.pngpost-1753549-0-14071300-1507754515_thumb.png

 

 

As you can see I'm not using any USB fixes for my Motherboard Gigabyte AX370 as my setup is not requiring it.   I have USB 3.0 and 3.1 listed in about this Mac, and they al work except my case USB2.0 slots.  If you have the USB fix kexts in Other folder try removing them and see if you get past the USB error.    For modern Ryzen boards they may not be required in High Sierra.   In sierra I use them.

 

If your getting the error that your system is incompatible or can't be installed on this system check your clover MLB number.    It needs to be 17 digits long for Mac Pro 6.1 definition.    An easy fix for this is to take your serial number and paste it there and then add more letters or numbers to reach 17 total.    

 

post-1753549-0-47085600-1507747483_thumb.pngpost-1753549-0-82550500-1507747518_thumb.png

 

Also, in order for your Kexts to inject you should set inject kexts in Clover System preferences section. It also has the option to create a UUID number as well.

 

post-1753549-0-98506800-1507747550_thumb.png

 

To use Clover Configurator open it and select "Mount EFi" choose the disk you want ton open and hit tab.   Close Configurator and look on desktop for the EFi folder or disk symbol open it and open Clover folder and right click on config.plist and select open with Clover Configurator.    you can make all these changes and then save at close.

 

Share this post


Link to post
Share on other sites

Still that problem... idk. 

I have all the time problem with that USB. On current version 10.12.6 - 4  I must put usb to any port and get out and finely  put that usb to any port (but can't put to the same port ) then... my usb load ;d Or just put usb on booting system.. then I don't need to that trick . Anyway I still have that loop messages. I put correct kext and set InjectKext in Clover. Anyway in bios I can't set XHCI to Enable(Don't have that Option). But I set it on BootFlag. I Have msi-970a-g43.

 

 

Give up. F!#$ this. It's impossible. Or just @Shaneee that USBFIX won't work anymore for all. I tried all methods, configs. Still USB don't give me access to first part of installation . Back to Linux.

Share this post


Link to post
Share on other sites

My Plist Giga

 

Update: i added dummy, generic, fakesmc

 

but with the bootflags radbeta and the other beta but with this both it instantly reboot.. 

with deleting the booth bootflags it comes to the kernel cache error (picture here)

config.plist.zip

post-2255651-0-62573900-1507803160_thumb.jpg

Share this post


Link to post
Share on other sites

My Plist Giga

 

Update: i added dummy, generic, fakesmc

 

but with the bootflags radbeta and the other beta but with this both it instantly reboot.. 

with deleting the booth bootflags it comes to the kernel cache error (picture here)

 

Try this, there were a few fixes.

config.plist.zip

Share this post


Link to post
Share on other sites

I used the config but again instant reboot or kernel cache error

Did you check for EFI backups folder on main partition? Remove any folders there.

Share this post


Link to post
Share on other sites

Not working for me - ACPI Error etc.. but maybe because this is not for ryzen? 

 

Or is this maybe of false settings on mainboard? 

post-2255651-0-53137100-1507832185_thumb.jpg

Share this post


Link to post
Share on other sites

Not working for me - ACPI Error etc.. but maybe because this is not for ryzen? 

 

Or is this maybe of false settings on mainboard? 

 

1)why do not you listen to me ? 
Try In the BIOS to change "ide" on "AHCI" ! 
 
2) You need install kext AppleATIATA - this if "ide"

Share this post


Link to post
Share on other sites

I dont have IDE in Bios under SATA i can change between RAID and AHCI

 

 

SATA Mode [AHCI Mode]

Sets the operation mode of the onboard SATA controller.

[AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI (Advanced Host Controller Interface) offers some advanced features to enhance the speed and performance of SATA storage device, such as Native Command Queuing (NCQ) and hot-plugging.

[RAID Mode] Enables RAID function for SATA storage devices

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Shaneee
      Introducing the AMD OS X FAQ. This is still currently a work in progress but most of the ground work is there. If you've got any suggestions feel free to email me at shaneee@amd-osx.com
       
      https://amd-osx.com/faq/
    • By spakk
      Hey @ll, here you can ask several special questions about Ryzen CPUs or installation
    • By xxGOMESxx
      Uma "ajudinha" aki clã,
      Eu tenho a R9 270 e gostaria de mais informações de como instalar os drivers. Eu tentei arrumar os drivers aki no Yosemite, ja vi várias pessoas que conseguiram instalar a R9 270x e algumas q instalaram com a R9 270. Na primeira vez que eu inicio o hackinsoth (pra instalar) funciona tudo normal com os boot args: /amd1 npci=0x3000 (note que eu uso um processador AMD, mas atualmente não interfere mais na performance do hackintosh, visto que ele não necessita mais de um processador Intel). Depois de usar esses boot args, a instalação ocorre perfeitamente e o primeiro boot também, porém sem os drivers da placa de vídeo, ou seja, animações travando muito. Outro problema que encontro é que, sempre quando reinicio o PC depois de acabar de reparar as permissões, etc. na hora de fazer login ele trava na tela com o mouse rodando (aquela bolinha colorida) e um loop infinito nessa tela sempre acontece. Espero conseguir ajuda. Eu sei que isso também deve ter algo a ver com o FrameBuffer, mas das poucas vezes que eu consegui mudar alguma coisa nas configurações do clover, na hora de reiniciar e fazer login, o loop depois da tela de bloqueio ocorre novamente. Eu sempre usei hackintosh no meu Notebook da Dell, mas agora que tenho uma máquina que eu sei que tem suporte eu fico nervoso por não conseguir instalar tudo certinho, porque sei que o erro, com certeza sou eu quem está cometendo. Mas gostaria de ajuda ^^
       
      Minha placa de vídeo: Gigabyte Radeon R9 270 (OC Version).
      Meu processador: AMD FX4300 (funcionando com o boot arg: /amd1)
      Minha placa mãe: GA-78LMT-USB3 rev5 (tudo funcionando também, boot args: npci=0x3000)
      Memória RAM: 8GB HyperX
       
      OBS: A versão do FrameBuffer que eu preciso não aparece no kext  AMD7000Controller nem no AMD4000XController (já cliquei em "show package content" mas n achei meu FrameBuffer que provavelmente é o Futomaki, mas não tenho certeza.
       
      OBS 2: Já ativei a opção InjectATI no Clover e também ja salvei e substitui as configurações (substitui o arquivo do clover, pelo meu editado com os meus boot args, framebuffer info, etc.
       
      OBS 3: Não se esquecam de me ajudar também, se possível na correção desse bug da tela de login que eu comentei. Provavelmente após corrigir esse problema da placa de vídeo, não acontecerá mais nenhum loop, mas como também não tenho certeza, peço ajuda novamente.
       
      OBRIGADO PESSOAL, BEIJO NA TESTA DE VCS KKKK
       
      P.S.: RXILHA
×