danielyoung Posted July 11, 2017 Share Posted July 11, 2017 DELL Vostro 5460-R2748TB Motherboard: Intel Sunrise Point H110 CPU: i7-7700T Graphics Coprocessor: HD630 & Nvidia Geforce 930MX Soundcard: Realtek ALC668 Wireless: Intel® Dual Band Wireless-AC 3165 Bluetooth: Intel Wireless Bluetooth® Others: Webcam2 USB3.0 Clover 4075 GPT/UEFI macOS Sierra 10.12.5 16F73 BIOS setting: clover config.plist config.plist.zip Problems: 1. Shutdown mac, screen is black but it’s still power on; How to fix shutdown problem? 2. Touch screen(not touchpad) and sound sometimes neither work, sometimes both work well. 3. Even plug in headphones, speakers are also working and headphones no sound. 4. How to block the Nvidia graphics card? I think it’s useless because cannot drive two graphics cards. 5. BIOS usually appears hardware detection screen, but the result is no problem. Why it happens. 6. Memory shows empty. I think these problems are caused by DSDT and SSDT. Can anyone help? Thank you. Link to comment Share on other sites More sharing options...
midi-sama Posted July 11, 2017 Share Posted July 11, 2017 Ok I wont be of much help but here are some stuff I know 1) There is a shutdown DSDT fix in Rehabman's fixes, try them also patch for IRQ HPET Mutex (under sys) and other stuff (do not apply two patches of the same category -like shutdown fix 1 and 2- 2) in addition to IRQ fix, CodecCommander and AppleALC may be of help. For touch, if it is USB connected, you can check touch-base drivers (you said it "worked", so I guess it's USB driven). Use clover > kexts folder for kext injection (you will need Lilu -from the same developer- for AppleALC to work). 3) Depends on your audio codec and how it's patched. Some codecs may have variations, so do some tests (that's why I recommend AppleALC as it's patching on-the-fly and you may change the layout-id from clover directly to test out). if none of them work, go to the audio section here and ask for help (or go to applealc thread to ask directly http://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/?do=findComment&comment=2221652, you can also go to applehda patcher's thread in the download section, then go to the discussion forum, do NOT post in the download section) 4) I guess it uses Optimus, so you better disable it from the UEFI firmware setup (aka BIOS setup) or using DSDT or SSDT (google that, it may be helpful if you're switching Windows to use that card) 5) ??? is that an issue? 6) That's purely cosmetics, you can manually add the information in clover configurator OR maybe your computer has 2 empty slots and the ram used is soldered to the motherboard (I did not look for your device or tried to, you do the research) Have Fun Link to comment Share on other sites More sharing options...
MaLd0n Posted July 12, 2017 Share Posted July 12, 2017 -Post ur full Clover folder with original tables, press F4 in Clover Boot Screen, files generate in Clover/Acpi/origin -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=235412 -Run it, post files generate in ur desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=222609 Link to comment Share on other sites More sharing options...
danielyoung Posted July 12, 2017 Author Share Posted July 12, 2017 -Post ur full Clover folder with original tables, press F4 in Clover Boot Screen, files generate in Clover/Acpi/origin -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=235412 -Run it, post files generate in ur desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=222609 Thanks! Ok I wont be of much help but here are some stuff I know 1) There is a shutdown DSDT fix in Rehabman's fixes, try them also patch for IRQ HPET Mutex (under sys) and other stuff (do not apply two patches of the same category -like shutdown fix 1 and 2- 2) in addition to IRQ fix, CodecCommander and AppleALC may be of help. For touch, if it is USB connected, you can check touch-base drivers (you said it "worked", so I guess it's USB driven). Use clover > kexts folder for kext injection (you will need Lilu -from the same developer- for AppleALC to work). 3) Depends on your audio codec and how it's patched. Some codecs may have variations, so do some tests (that's why I recommend AppleALC as it's patching on-the-fly and you may change the layout-id from clover directly to test out). if none of them work, go to the audio section here and ask for help (or go to applealc thread to ask directly http://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/?do=findComment&comment=2221652, you can also go to applehda patcher's thread in the download section, then go to the discussion forum, do NOT post in the download section) 4) I guess it uses Optimus, so you better disable it from the UEFI firmware setup (aka BIOS setup) or using DSDT or SSDT (google that, it may be helpful if you're switching Windows to use that card) 5) ??? is that an issue? 6) That's purely cosmetics, you can manually add the information in clover configurator OR maybe your computer has 2 empty slots and the ram used is soldered to the motherboard (I did not look for your device or tried to, you do the research) Have Fun Thanks! Ok I wont be of much help but here are some stuff I know 1) There is a shutdown DSDT fix in Rehabman's fixes, try them also patch for IRQ HPET Mutex (under sys) and other stuff (do not apply two patches of the same category -like shutdown fix 1 and 2- 2) in addition to IRQ fix, CodecCommander and AppleALC may be of help. For touch, if it is USB connected, you can check touch-base drivers (you said it "worked", so I guess it's USB driven). Use clover > kexts folder for kext injection (you will need Lilu -from the same developer- for AppleALC to work). 3) Depends on your audio codec and how it's patched. Some codecs may have variations, so do some tests (that's why I recommend AppleALC as it's patching on-the-fly and you may change the layout-id from clover directly to test out). if none of them work, go to the audio section here and ask for help (or go to applealc thread to ask directly http://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/?do=findComment&comment=2221652, you can also go to applehda patcher's thread in the download section, then go to the discussion forum, do NOT post in the download section) 4) I guess it uses Optimus, so you better disable it from the UEFI firmware setup (aka BIOS setup) or using DSDT or SSDT (google that, it may be helpful if you're switching Windows to use that card) 5) ??? is that an issue? 6) That's purely cosmetics, you can manually add the information in clover configurator OR maybe your computer has 2 empty slots and the ram used is soldered to the motherboard (I did not look for your device or tried to, you do the research) Have Fun BIOS usually appears hardware detection screen, but the result is no problem. Why it happens? Touch screen(not touchpad) sorry for my poor English Daniel’s iMac.ioreg.zip Send me Daniel’s iMac.zip CLOVER.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted July 12, 2017 Share Posted July 12, 2017 CLOVER.zip audio, u can test ids with AppleAlc, what ur audio codec? hwp, imac17 dont use, only mbp use hwp, check it Link to comment Share on other sites More sharing options...
danielyoung Posted July 14, 2017 Author Share Posted July 14, 2017 CLOVER.zip audio, u can test ids with AppleAlc, what ur audio codec? hwp, imac17 dont use, only mbp use hwp, check it shutdown problem still exist; headphones no sound still exist after I test 27/29 I once opened the computer, and stayed in this screen (using the clover files you give), I have to shutdown by force. This just happened once 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted July 14, 2017 Share Posted July 14, 2017 the problem kext wait, is a bug i some clover version check ur video config, remove inject hdmi intel, etc, use only basic 1 Link to comment Share on other sites More sharing options...
danielyoung Posted September 27, 2017 Author Share Posted September 27, 2017 can you help me disable discrete graphics card (nvidia) by modify ssdt or using hotpatch? CLOVER.zip audio, u can test ids with AppleAlc, what ur audio codec? hwp, imac17 dont use, only mbp use hwp, check it Link to comment Share on other sites More sharing options...
danielyoung Posted September 27, 2017 Author Share Posted September 27, 2017 I want to update to 10.13, so I have to disable discrete graphics card the problem kext wait, is a bug i some clover version check ur video config, remove inject hdmi intel, etc, use only basic Link to comment Share on other sites More sharing options...
Recommended Posts