Jump to content
xXConcasXx

Problema touchpad ASUS N552VW

86 posts in this topic

Recommended Posts

41 minutes ago, gengik84 said:

puoi duplicare il dsdt e nominarlo come vuoi, poi lo richiami dalla gui di clover/opzioni

per la backilight, avvia con il DSDT2 che ti ho messo nella clover e fai ioreg

per i sensors non devi parcare nulla.. ti ripeto, ti mancano solamente i kext nella efi :)

ok ho messo i Kext ed i sensori adesso vanno... pensavo fosse da patchare perché li avevo fatti funzionare applicando una patch... adesso... se DSDT" si avvia facendo come in foto (sputami pure addosso se non si fa così ahah) questo è l'ioreg https://drive.google.com/open?id=1uwxfcx5vgCvX-kygYCKc_azXhz-SX-6h la luce non va... è normale che il portatile succhi molta più batteria di quanto faccia con windows?

IMG_3514.jpeg

Edited by Dake

Share this post


Link to post
Share on other sites
Advertisement

per farlo caricare quando sei nella gui di clover devi andare nelle opzioni/acpi/DSDT

nel menù dovresti vedere DSDT e DSDT2

selezioni quest'ultimo, ritorni nella gui e poi avvii

Share this post


Link to post
Share on other sites
3 minutes ago, gengik84 said:

per farlo caricare quando sei nella gui di clover devi andare nelle opzioni/acpi/DSDT

nel menù dovresti vedere DSDT e DSDT2

selezioni quest'ultimo, ritorni nella gui e poi avvii

ok quindi come ho fatto nella foto sopra non va bene... provo a cercare ma non vedo la possibilità di scegliere in altro modo...

Share this post


Link to post
Share on other sites

ah ok si va bene in quel modo

io intendevo nella gui di Clover, praticamente dove selezioni il disco per il boot :)

inizialmente avevi AppleBacklightInjector era tuo, nel senso l'avevi creato tu?

Share this post


Link to post
Share on other sites
3 minutes ago, gengik84 said:

ah ok si va bene in quel modo

io intendevo nella gui di Clover, praticamente dove selezioni il disco per il boot :)

inizialmente avevi AppleBacklightInjector era tuo, nel senso l'avevi creato tu?

a ok allora ho fatto giusto... no non avevo fatto nulla per questa cosa... ne Kext ne nulla... 

Share this post


Link to post
Share on other sites
3 minutes ago, gengik84 said:

ma l'avevi installato mi sembra in Library/extensions

 

Forse in fase di installazione... ma non io manualmente... avevo preso un Clover da una guida... adesso ho AppleBacklight.kext e AppleBacklightExpert.kext in SLE e AppleBacklightInjector.kext in LE

Share this post


Link to post
Share on other sites
5 minutes ago, gengik84 said:

ah ok quindi l'injector l'hai sempre installato

Metti questo dsdt in patched, e caricalo per il boot

rifai ioreg

DSDT3.aml.zip

niente... però con il 2 ed il 3 come dsdt quando stacco o attacco l'alimentatore la luminosità dello schermo... quindi lo accendo ed è al massimo... attacco o stacco l'alimentatore e cala per rimanere bassa... https://drive.google.com/open?id=1R6azlKEyEoCsGLnGLT4eDBCbVURctVLv

Share this post


Link to post
Share on other sites
27 minutes ago, gengik84 said:

intanto vai in L/E e cancella quel'injector

ricostruisci la cache e riavvia

Ci aggiorniamo tra un po...

ok... buon weekend in caso! grazie ancora

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By rdall96
      Hello everyone!
       
      I am fairly new to the world of Hackintosh. I recently moved my previous build into a smaller form factor. However, I am running into a series of problems with the USB ports on the new case and the new motherboard.
       
      Part List:
      - i7-7700k
      - Gigabyte Z270N Gaming 5
      - 16GB Trident Z RGB 3200 MHz
      - Sapphire RX 470
      - NZXT Kraken x62
      - NZXT H200 for the case
       
      Everything in the Hackintosh works just like it did before, nothing changed in the hardware department other than the motherboard (previously a gigabyte Z20X Ultra) and the case.
      This motherboard does not have any USB 2.0 ports in the back, there is only one header on the board, currently taken by the Kraken x62. The rest of the ports are all either USB 3.1 Gen1 or USB 3.1 Gen2, and the front of the case has 3.1 Gen1 ports as well.
       
      This is my current problem:
      When I plug something into either the type A or type C Gen2 ports, it works fine as a normal USB 3.x device with normal speeds, but when I plug something into any other USB port, it only works at lower 2.0 speeds. This is a big problem for me, since I have a few external devices that need the 3.0+ speeds and I don't know what to do.
      I tried to follow many different guides on how to patch USB ports, remove the limits, etc... But nothing seems to work.
       
      Please someone help me!
    • By angelo_ios
      EDIT: MacOS Mojave 10.14 ONLY I didn’t test 10.14.1! The EFI folder is compatible with High Sierra.
       
      Guide to installing 10.14 Mojave on a ASUS X555L
       
      What Works:
      -WiFi
      -Sound
      -Graphics (Intel)
       
      What doesn't Work:
      -Bluetooth
      -NVidia Web Drivers
      -Battery Indicator
       
      Used Kexts:
      Picture
       
      Clover setup:
      Clover plist is downloadable in this topic.
       
      Let's start
       
      Step one:
      First get a USB with 8+ GB of storage and a MacOS Mojave 10.14 installer from the AppStore.
       
      Partition the USB in a GUID style and 2 partitions, one partition HFS+ and one partition FAT32.
       
      In the FAT32 partition put the EFI Folder there.
       
      On the HFS+ partition get the MacOS Mojave .app using this command:
      sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USBNAME --applicationpath /Applications/Install\ macOS\ Mojave.app --nointeraction Lets install!
       
      Put the USB in a 3.0 port on the LEFT side of the Notebook.
       
      In the BIOS follow the default Hackintosh settings, do NOT forget to put Memory allocation to 64MB (Otherwise you won't boot)
       
      Boot into the Installer and install MacOS Mojave.
       
      Boot into MacOS. Now your Graphics are working but your WiFi and Sound are not! for the WiFi follow this video:
      https://www.youtube.com/watch?v=OxFsjhc-AuM Once rebooted WiFi is working! 
       
      For sound get the VooDooHDA.kext and place it into /Library/Extensions
       
      Reboot once again and your sound is now working flawlessly!
       
      My EFI Folder is downloadable

      config.plist
      EFI.zip
    • By fusion71au
      Clover r4747 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.14 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r4747 for VMware.zip". Mount Clover-v2.4k-4747-X64 by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By superdooper71
      Hi all,
      I hope someone can help me as I am struggling with this bloody installation.
      I am running on several problems that I can't face : (
       
      First of all my config:
      Mobo: ASROCK H81M-DGS R2
      CPU: Intel Xeon E3-1220 v3 @3.10ghz
      RAM: 16gb DDR3 1600Mhz
      SSD: Crucial BX100 120Gb SSD
      Monitor: Hp 27w Hdmi
       
      POST Installation CLOVER
       
      Current Issues:
      • System will not boot (clover boot loader do not shows up) from SSD
         - System boot only with USB stick
      • Screen Resolution is only 1024x768
      • Monitor recognised as 17" instead of 24"
      • Monitor identified as secondary
      • Grafic Card Geforce GT710 shows 0 Mb
      • System info do not match Config.plistin Clover
       
      I attach screenshot of System Info, Kext in Clover, Resolution etc etc.
       
      Please can someonhelp me?
       
      Please can you tell me what is the Clover Parameter to activate when installing Clover  (Clover_v2.4k_r4722) into Boot Disk?
       
      I hope someone can help me out of this little troble: )
       
      Cheers
      Franco
       
      system info.tiff
      kext.tiff
      resolution.tiff
      system.tiff
      config.plist
    • By fantomas1
      Hi InsanelyMacaholics   

      Use this thread to link / talk about of the future Nvidia Web Driver updates for macOS Sierra.
       
      10.12.6
      Nvidia Web Driver - 378.05.05.25f11 --> build 16G1618 (thanks to Frank Nitty) New!
      Nvidia Web Driver - 378.05.05.25f10 --> build 16G1510 (thanks to BreBo) 
      Nvidia Web Driver - 378.05.05.25f09 --> build 16G1408 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f08 --> build 16G1314 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f07 --> build 16G1314 (thanks to haring)
      Nvidia Web Driver - 378.05.05.25f06 --> build 16G1212 (thanks to WeBeRiO)
      Nvidia Web Driver - 378.05.05.25f04 --> build 16G1114 (thanks to lukazm)
      Nvidia Web Driver - 378.05.05.25f03 --> build 16G1036 (thanks to Gradou)
      Nvidia Web Driver - 378.05.05.25f01 --> build 16G29 (thanks to Badruzeus)
       
       
      10.12.5
      Nvidia Web Driver - 378.05.05.15f01 --> build 16F73 (see this post)
       
       
      10.12.4
      Nvidia Web Driver - 378.05.05.05f02 --> build 16E195(thanks to crachmaster4999)
      Nvidia Web Driver - 378.05.05.05f01 --> build 16E195 (thanks to Moviemakergr)  Pascal support!!!
      Nvidia Web Driver - 367.15.10.45f01 --> build 16E195 (thanks to Lanc)
       
       
      10.12.3

      Nvidia Web Driver - 367.15.10.35f01 --> build 16D32 (thanks to shatterhenner)
       
       
      10.12.2
      Nvidia Web Driver - 367.15.10.25f02 --> build 16C68 (see this post)
      Nvidia Web Driver - 367.15.10.25f01 --> build 16C67 (see this post)
      Nvidia Web Driver - 367.15.10.25b06 --> build 16C60b/16C63a (see this post)
       
       
      10.12.1
      Nvidia Web Driver - 367.15.10.15f03 --> build 16B2657/16B2659 (thanks to Moviemakergr).
      Nvidia Web Driver - 367.15.10.15f01 --> build 16B2555 (thanks to Moviemakergr)
       
       
      10.12.0
      Nvidia Web Driver - 367.15.10.05f01 --> build 16A323 (thanks to phi777)
       
       
      GM
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A323 (same driver since DP4/PB3)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A322 (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A320 (see this post)
       
       
      DP/PB
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A313a (DP8 & PB7) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A304a (DP7 & PB6) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A294a (DP6 & PB5) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A286a (DP5 & PB4) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A270f (DP4 & PB3) (thanks to TheRacerMaster)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A254g (DP3 & PB2) (see this post)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A238m (PB1) (thanks to Faun) 
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A239j (DP2) (thanks to Faun)
      Nvidia Web Driver - 367.05.10.05b03 --> build 16A201w (DP1) (thanks to Xmedik)
       
×