Jump to content
fantomas

[pre-release] macOS High Sierra

3,845 posts in this topic

Recommended Posts

Update: Removed AirPortBrcmNIC-MFG.kext and replaced IO80211Family.kext with the one from Sierra and handoff works now under High Sierra too :yes:

 

But this isn't really update-proof, so if anyone knows a better solution then please tell me

 

attachicon.gifSchermafbeelding 2017-08-03 om 16.12.07.png

Good info.

Actually handoff patch is same like 10.12 on 10.13.

 

We need to find more bcm patch for handoff.

Hmm..

 

나의 LG-F800S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites
Advertisement

Good info.

Actually handoff patch is same like 10.12 on 10.13.

 

We need to find more bcm patch for handoff.

Hmm..

 

나의 LG-F800S 의 Tapatalk에서 보냄

ReHabMan's Handoff patch in IOBluetoothFamily.kext is indeed the same

Find: <4885ff74 47488b07>
Replace: <41be0f00 0000eb44>

Within Sierra the-darkvoid patch is

AirPortBrcm4360.kext
Find: 81f952aa 00007529
Replace: 81f952aa 00006690

But in High Sierra BCM4360 isn't used by AirPortBrcm4360.kext, but AirPortBrcmNIC-MFG.kext.

 

In Sierra I had to use the-darkvoid patch otherwise my WiFi would not work (no hardware found)

In High Sierra the WiFi works OOB on AirPortBrcmNIC-MFG.kext, but handoff does not work then

Share this post


Link to post
Share on other sites

Is there anyway to pach BCM4311 witch was naturaly supported before ? ( in Maverick, ML, etc ...)

Share this post


Link to post
Share on other sites

Thanks Mnfesq, solved my problem by adding a line to my DSDT (LID0_Method). Now it works to sleep / wake up when closing and to open lid

hi Camillionario what line you insert on dsdt

Share this post


Link to post
Share on other sites

hi Camillionario what line you insert on dsdt

ok,,, For some reason these lines did not appear in DSDT edited before this one. Method Q15 and Q16 are the ones that report the change of state of the cover, so I solved the problem by adding these missing lines in DSDT

 

Method (_Q15, 0, NotSerialized)  // _Qxx: EC Query

            {

                Store (0x15, P80H)

                Notify (PS2M, 0x0E)

                Store (One, LIDS ())

                ^^^GFX0.GLID (LIDS ())

                Notify (LID0, 0x80)

            }

 

            Method (_Q16, 0, NotSerialized)  // _Qxx: EC Query

            {

                Store (0x16, P80H)

                Notify (PS2M, 0x0D)

                Store (Zero, LIDS ())

                ^^^GFX0.GLID (LIDS ())

                Notify (LID0, 0x80)

            }

 

If (LEqual (ECON, One))

            {

                If (LOr (LEqual (Arg0, 0x03), LEqual (Arg0, 0x04)))

                {

                    Store (\_SB.PCI0.LPCB.EC0.LSTE, LIDS ())

                    If (IGDS)

                    {

                        If (LEqual (LIDS (), Zero))

                        {

                            Store (0x80000000, \_SB.PCI0.GFX0.CLID)

                        }

 

                        If (LEqual (LIDS (), One))

                        {

                            Store (0x80000003, \_SB.PCI0.GFX0.CLID)

                        }

                    }

                }

 

 

Product of an erroneous compilation with MaciasL ACPI 6.1 being correct ACPI 4.0

With this, solve the problem.
 
Thanks Piker

Share this post


Link to post
Share on other sites

 

ok,,, For some reason these lines did not appear in DSDT edited before this one. Method Q15 and Q16 are the ones that report the change of state of the cover, so I solved the problem by adding these missing lines in DSDT

 

Method (_Q15, 0, NotSerialized)  // _Qxx: EC Query

            {

                Store (0x15, P80H)

                Notify (PS2M, 0x0E)

                Store (One, LIDS ())

                ^^^GFX0.GLID (LIDS ())

                Notify (LID0, 0x80)

            }

 

            Method (_Q16, 0, NotSerialized)  // _Qxx: EC Query

            {

                Store (0x16, P80H)

                Notify (PS2M, 0x0D)

                Store (Zero, LIDS ())

                ^^^GFX0.GLID (LIDS ())

                Notify (LID0, 0x80)

            }

 

If (LEqual (ECON, One))

            {

                If (LOr (LEqual (Arg0, 0x03), LEqual (Arg0, 0x04)))

                {

                    Store (\_SB.PCI0.LPCB.EC0.LSTE, LIDS ())

                    If (IGDS)

                    {

                        If (LEqual (LIDS (), Zero))

                        {

                            Store (0x80000000, \_SB.PCI0.GFX0.CLID)

                        }

 

                        If (LEqual (LIDS (), One))

                        {

                            Store (0x80000003, \_SB.PCI0.GFX0.CLID)

                        }

                    }

                }

 

 

Product of an erroneous compilation with MaciasL ACPI 6.1 being correct ACPI 4.0

With this, solve the problem.
 
Thanks Piker

 

i do not have method q15 e q16 on my dsdt. how compile if is possible 

DSDT.aml.zip

Share this post


Link to post
Share on other sites

i do not have method q15 e q16 on my dsdt. how compile if is possible 

In your DSDT Q52 Q53. This might not work if Sleep / Hibernation Wake does not work, or CPU power Management is not implemented.

Try DSDT attached.

 
 

DSDT.aml.7z

Share this post


Link to post
Share on other sites

 

In your DSDT Q52 Q53. This might not work if Sleep / Hibernation Wake does not work, or CPU power Management is not implemented.

Try DSDT attached.

 
 

attachicon.gifDSDT.aml.7z

 

sorry but if compile your dsdt with MaciasL ACPI 6.1 I have 2 error on ACPI 4.0 67 error. ps for implemented correct  pow man ?

Share this post


Link to post
Share on other sites

anyone find away around the forced apfs bug with beta 4 installer? 

where you format as hfs+ and it forces you to apfs during the install? 

Share this post


Link to post
Share on other sites

anyone find away around the forced apfs bug with beta 4 installer? 

where you format as hfs+ and it forces you to apfs during the install? 

 

See this post by camillionario: http://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/?p=2471719

Share this post


Link to post
Share on other sites

wifi whitist patch has been changed since beta5 and i hope to find new patch for the wireless whitelist patch.

 

 

 

从我的 iPhone 发送,使用 Tapatalk

I found:
When i add whitelist patch then the kextstat is only show brcm4331 and with no brcm4360.
When i delete whitelist patch then kextstat show brcm4331 and brcm4360 but the wifi was grey without function.
 
Does this means apple dont let us patch whitelist?
Or if we try to patch whitelist will cause the kext(brcm4360.kext) unload?
 
Now the KextToPatch whiteliast patch and AirportBrcmFixup are all failed in new beta5 system.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Rohan20
      Opencore is running really really slow on Catalina 10.15.4. So It was running perfectly before I put the ssdt-pnlf for enabling Brightness control. it is running really slow and I verified my config with the sanity checker and its all correct. can someone please help. I am attaching my oc folder.

       
      https://www.dropbox.com/s/drkek0eaz19ina5/OC.zip?dl=0
       
    • By RyzenDude
      Hi everyone,
      Today I finished my High Sierra install with OpenCore. I got everything up and running but I can't seem te get rid of this text on te boot screen while booting up. Does anyone have a solution to this?
      Thanks in advance!
      Hardware:
      CPU: Ryzen 5 1600
      GPU: GTX 980
      RAM: 16 GB DDR4 2666 MHz
      Motherboard: ASUS EX-A320M-GAMING
      Audio Codec: AppleALC
      Ethernet Card: Realtek RTL8111
      Bootloader: OpenCore 0.5.5

    • By Sagnik Ganguly
      Hello I'm Sagnik Ganguly, I'm trying to dual boot macOS 10.14 and Windows 10 (already installed) on a PC with Legacy BIOS. I've two hard drives one in where the windows is installed and another which is converted to GPT to install macOS Mojave 10.14 with a partion of Mac OS Extended (Journal) or APFS but when I went to the Install Disk Selection page, I'm selecting the partition but it says "This version of macOS 10.14 cannot be installed on this computer." can you help me please? 
      P. S. My motherboard doesn't support UEFI. 
      I'm attaching some pictures of the screens.


    • By y010204025
      Disclaimer: All files of this article are from itpwd.com and rehabman ’s github.com

       
      After Testing:
       
      Graphics card: NVIDIA K1000M / K2000M / K2100M / K3000M / K3100M / K4000M / M1000M (ordinary TN1600x900 or 1920x1080), AMD W5170M / W7170M (DC2 or 4K), Intel HD4000 (ordinary TN1600x900 or 1920x1080) can be driven normally, but NVIDIA graphics card Brightness adjustment is disabled. AMD W5170m and w7170m are the best choices on 8570W and 8770W. The brightness can be adjusted normally and the graphics performance is very good. For WX7100m and WX4170m, the graphics card fans cannot be controlled, and other methods are required to control the fans. CPU: 3rd generation Intel Core i3, i5 and i7 (Ivy Bridge architecture, including all dual-core and quad-core. Celeron and Pentium are not supported), frequency conversion is normal. In general: If you have 8570W, 8770W, and hope you can get the best Hackintosh experience, it is recommended to replace the CPU with i7-3840QM / i7-3940XM, 8570W is recommended to choose W5170M, 8770W, and it is recommended to choose W7170M. In addition: If you want to have a 4K experience or perfect HIDPI, W5170m / W7170M supports 4K output, you can choose a suitable 4K screen to replace, but because 4K screens are mostly edp interface, and 8570W / 8770W motherboard is lvds interface, This requires a custom screen cable, which seems to be a difficult choice, but you can choose to do it yourself or buy it separately. In China, taobao.com is almighty and may be more suitable for you than eBay.
       
      EFI features:
      out of the box, the relevant hardware can be driven after the OS is installed, and it is easy to use without code operation.
      Supported models: HP EliteBook 8470p, 8570p, 8570w, 8770w (click the model for official specifications)
      Wireless network card: Recommended: BCM94360cd (requires ipex4 to ipex1,3 antenna 1300mbps), BCM94352HMB / DW1550 (2 antennas, 867mbps)
      Wireless characteristics: no white list, wireless network card with Bluetooth does not support the Bluetooth function of the wireless network card (also does not need to shield the pins), but the wireless normal use, you need the Bluetooth function to use this machine comes with Bluetooth:
      Clover version: 5103, keyboard mapping has been added Command key = Alt key, Option key = Win key
      Supported systems: macOS Mojave 10.14.6 (18G103)-macOS Catalina 10.15.x,
       
      Notes on known issues:
      1. The touchpad and the left and right keys under the touchpad are normal, the pointing stick and the left and right keys above the touchpad are temporarily unavailable (recommended to use the second generation of Apple Magic Trackpad)
      2. Indicator display problem (can be ignored, function is normal): Caps light is sometimes not switched in time, mute / wireless key may be yellow
      3.AMD graphics card / Intel nuclear display has supported sleep and 15 levels of brightness adjustment, NVIDIA has no
      4. If the AMD graphics card enters Huaping, refer to editing the Clover startup parameters, and add the Boot parameter radpg = 15 (the EFI file that has been configured with this parameter has been uploaded, refer to the following EFI-guided download link)
      5. Using the above NVIDIA graphics card with a normal TN screen 1600x900 or 1920x1080 can not enter the installation interface, please check whether the VBiOS of the graphics card is exclusively for HP, thank you for your test face K1000M
      6. Due to product design defects, the MSata positions of 8570w and 8770w cannot be used as boot disks, so EFI boot can only be placed on the main hard disk (turn the machine over and open the hard disk in the lower left corner of the cover, which is the main hard disk). Put on msata plate
      +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
      Hardware requirements:
      Model: 8470p, 8570p, 8570W, 8770W 1 or more, it is recommended to use another notebook for emergency Hard disk: It is recommended to choose an SSD hard disk of 240g or more. Samsung or Intel SATA hard disk is a good choice. Wireless card: BCM94352HMB, DW1550, BCM94360CD, miniPCIe slot U disk: 1 for 16g and above, another winPE emergency USB disk is recommended If you use a rescue USB flash drive, it means that you read this post carefully
       
      Make and install a USB flash drive:
      Get the mirror: please do it your way Making and installing a USB flash drive: macOS command line production is recommended, whether it is a real macOS model or a virtual machine (although this is not allowed to be discussed in many forums)Or you can choose to use TransMac or ether under Windows. This is not recommended, but it is simple enough for those new to Hackintosh. Make boot U disk: If you know how to put the boot into the installation U disk, unzip the EFI file and put it in the EFI partition, or you can choose a fat32 format U disk to store the EFI file separately Note: EFI is an unzipped folder, not a zip or ISO suffix file.
       
      BIOS settings From RehabMan
      To start, set BIOS to defaults.
      Then insure:
      UEFI boot is enabled (hybrid/with CSM for best result) secure boot is disabled disable fast boot IGPU graphics memory set to 64mb, if available disable the serial port via BIOS option, if available disable "LAN/WLAN switching", if available disable "Extended Idle Power States" if you find it under "Power Management Options" disable "Wake on LAN" and "Wake on USB" disable Firewire/IEEE 1394, if your laptop has it for Skylake and KabyLake laptop, enable "Launch Hotkeys without Fn keypress" Note: If you have a laptop with switchable graphics, leave it enabled. You can still use it on Windows, although the discrete card will be disabled when running OS X by the ACPI patches provided here. If you want to also disable it in Windows (via BIOS option), make sure you read about the DGPU option in your model specific SSDT (source is in SSDT-HACK.dsl), as in the scenario where the DGPU is disabled by BIOS, DGPU should be set to zero.
       
      Install:
      Please modify according to the above BIOS settings: Press F9 after booting, select the boot efi to file option, which is generally the last item. Enter your boot USB disk to find the location of cloverx64.efi, select cloverx64.efi, press Enter, and enter the clover boot interface. Select the location of the install entry and press Enter. Enter the macOS interface, use the disk tool to format the partition you need to install to hfs + or apfs format, do not choose the encryption option, this will make your efforts in vain. Note: The disk must be in gpt format, and the remaining EFI space is greater than 200M, 300mb + is recommended. If it is not, please try to modify it in WindowsPE environment. This may cause you to lose the Windows system boot and disk data. Please prepare for backup.
      After formatting the partition successfully, close the disk tool and select install, you will find the partition you installed, and follow the interface prompts. When the installation reaches a certain progress, it will restart. When restarting, select F9, enter from the boot U disk, select the disk partition where you installed macOS (no longer the U disk installation), the installation will continue, and it may restart 2 ~ 3 times Every time, you need F9 to select the boot. After entering the installation interface, except for the first installation, select the U disk, and then select the disk installation partition. Eventually you will enter the settings interface. After following the interface prompts, you will enter the macOS system interface. Remember the system password and turn off the Find my mac option.  
      Post install:
       
      After the installation is complete, you need to hang the EFI partition of the disk, copy the EFI file of the U disk to the EFI partition of the disk, so that you can directly use the disk to boot, otherwise you need to select the U disk to boot each time. The mount tool can choose cloverconfigurator. If after copying the EFI file to the disk, the computer cannot recognize your clover boot, you can use the custom boot option of bios: set the custom boot path to \efi\clover\cloverx64.efi, and set it as the first boot, Use bootice or easyUEFI to increase the clover boot option under Windows and set it as the first boot. If you do not have a wireless network card available temporarily, you can use the USB binding function of your Android phone to share the network. This may require the HoRndis driver. It is not recommended to use a US wireless network card. If you need Windows or Linux, you can install it normally. Be careful not to let Windows overwrite your boot files.  
      For other uses of macOS and brew, please pay attention to forums and other communities. Hackintosh is just the beginning.
       
      Finally, I would like to thank rehabman, vit9696 and others who contributed to Hackintosh. I also thank Cwen for his efforts to modify files and hardware tests. I hope that Hackintosh will be eternal.
       
      Please comply with the laws and regulations of your country or region. My description may not be clear or professional, but I think it is necessary. I think the existence of Hackintosh is everyone's technical hobby and experience macOS, not as a substitute for macOS cheap hardware.

      EFI_8x70_5103_W7170m_20200116 .zip
×