Jump to content
fantomas

[pre-release] macOS High Sierra

3,845 posts in this topic

Recommended Posts

Hi @Sherlocks, for report only..

 

The only test I didn't try yet is plugging out my SATA drive since (looks like) another OSes inside it cause problem, or another reasons. Thanks

(still using same mach as seen on my signature, tomorrow test)

 

Ah OK, did the test with SATA Disk plugged out (no Disk at all, only USB Installer); but I still get same "OSInstall.mpkg" error as well. Was using Clover r4101 and Enoch r2885 both give same results, also with some new 2017 Platform Datas with different SMBioses. The outputs from root device with "diskutil info / | grep UUID" are same; no strange issue with it. macOS version I've tried so far was 10.13 Beta DP1 only. Thanks

Share this post


Link to post
Share on other sites
Advertisement

I hope it works out. ;)

Oops tried wrong version. Tried 4094 fresh USB install and still OSInstall.mpkg error. Will downgrade USB and try again.

 

Edit: Nope it was 4092

 

Sent from my SM-G930F using Tapatalk

Share this post


Link to post
Share on other sites

Can anyone encountering AppleSMCRTC panics try booting with keepsyms=1 (with the 10.13 AppleACPIPlatform, no downgrades)? I'd like to find the cause.

 

Hello, take a look.. sounds new Here  :)

Share this post


Link to post
Share on other sites

Hmmb, my bad.. I never got it using Clover since r4087. On my case, it always give "OSInstall.mpkg" error message on first Install GUI appears. I think my USB Install method caused the problem, since I'm not using Create Install Media but BaseSystem restore (caused of this?). Thanks for confirming, anyway  :wink_anim:

 

If you use the old basesystem restore method, you will never get to install and always get "OSInstall.mpkg"error.

The only way to install 10.13 is to use createinstallmedia to create Installer or use new MBR installer method for both GPT and MBR .

Share this post


Link to post
Share on other sites

hello

 

if has osinstall.mpkg error, try this on Platformfeature

 

imac13,x 0x01

Imac14,x 0x01

imac15,x 0x01

imac17,1 0x00

 

MB8,1 0x1A

 

MBP11,x 0x02

MBP12,1 0x02

MBP13,x 0x1A

 

MacMini6,x 0x01

MacMini7,x 0x03

 

MacPro6,1 0x04

 

i'm not sure that this values actually affect to fix error or not.


X99  broadwell-e 6850k and RX580 all good. 

 

did you install fresh HS Beta2 update1?

Share this post


Link to post
Share on other sites

Oops tried wrong version. Tried 4094 fresh USB install and still OSInstall.mpkg error. Will downgrade USB and try again.

 

Edit: Nope it was 4092

 

Sent from my SM-G930F using Tapatalk

So you have no luck with 4092,4094,4097,4100 and 4101. The only way that you can Install macOS High Sierra DP 2 update 1 is as if you install it from Sierra? Right?

Share this post


Link to post
Share on other sites

So you have no luck with 4092,4094,4097,4100 and 4101. The only way that you can Install macOS High Sierra DP 2 update 1 is as if you install it from Sierra? Right?

That's correct. All USB installs have ended in OSInstall.mpkg error.

I think I'll wait for official release before testing more on my laptop, too many partitions to worry about and messes up my custom entries.

Back to Skylake.

Sent from my SM-G930F using Tapatalk

Share this post


Link to post
Share on other sites

hello

 

if has osinstall.mpkg error, try this on Platformfeature

 

imac13,x 0x01

Imac14,x 0x01

imac15,x 0x01

imac17,1 0x00

 

MB8,1 0x1A

 

MBP11,x 0x02

MBP12,1 0x02

MBP13,x 0x1A

 

MacMini6,x 0x01

MacMini7,x 0x03

 

MacPro6,1 0x04

 

i'm not sure that this values actually affect to fix error or not.

Just to be clear I use the values just like you said? I mean I just need to change the PlatformFeature in clover GUI and replace the PlatformFeature: 0xFFFF with PlatformFeature:0x01 ?

Share this post


Link to post
Share on other sites

Just to be clear I use the values just like you said? I mean I just need to change the PlatformFeature in clover GUI and replace the PlatformFeature: 0xFFFF with PlatformFeature:0x01 ?

Yes. Change 0xFFFF to you want(0x01)

Or if you want to keep PF, PlatformFeature String 0x01 in config.plist.

 

This is test. Not sure that can pass osinstall.pkg or not

 

나의 LG-F800S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites

Yes. Change 0xFFFF to you want(0x01)

Or if you want to keep PF, PlatformFeature String 0x01 in config.plist.

 

This is test. Not sure that can pass osinstall.pkg or not

 

나의 LG-F800S 의 Tapatalk에서 보냄

Thanks, I've been testing with 4097 and no luck so far. I'll keep testing and I will give you the results as soon as I'm done.

Share this post


Link to post
Share on other sites

Yes. Change 0xFFFF to you want(0x01)

Or if you want to keep PF, PlatformFeature String 0x01 in config.plist.

 

This is test. Not sure that can pass osinstall.pkg or not

 

나의 LG-F800S 의 Tapatalk에서 보냄

Changed my mind. Testing latest clover 4102 I think with 0x02 platformfeature with USB install.

 

Edit: Still the same outcome with OSInstall.mpkg error.

 

Sent from my SM-G930F using Tapatalk

Share this post


Link to post
Share on other sites

For your platformdata update @Sherlocks:

 

 

 

EFIPayloads:

 - IM101.88Z.00CD.B01.1706261549
 - IM111.88Z.0035.B01.1706261406
 - IM112.88Z.0058.B01.1706261628
 - IM121.88Z.004A.B01.1706261231
 - IM131.88Z.010C.B01.1706261419
 - IM141.88Z.0119.B01.1706261354
 - IM142.88Z.0119.B01.1706261827
 - IM143.88Z.0119.B01.1706261217
 - IM144.88Z.0180.B01.1706261218
 - IM151.88Z.0208.B01.1706261354
 - MB61.88Z.00C9.B01.1706261518
 - MB71.88Z.003A.B01.1706261443
 - MBA31.88Z.0064.B01.1706261714
 - MBA41.88Z.0078.B01.1706261217
 - MBA51.88Z.00F1.B01.1706261433
 - MBA61.88Z.0100.B01.1706261827
 - MBP101.88Z.00EF.B01.1706261418
 - MBP102.88Z.0107.B01.1706261827
 - MBP111.88Z.0139.B01.1706261010
 - MBP112.88Z.0139.B01.1706261355
 - MBP61.88Z.0058.B01.1706261104
 - MBP71.88Z.003A.B01.1706261020
 - MBP81.88Z.0049.B01.1706261922
 - MBP91.88Z.00D4.B01.1706261216
 - MM41.88Z.0043.B01.1706261836
 - MM51.88Z.0078.B01.1706261437
 - MM61.88Z.0107.B01.1706261217
 - MM71.88Z.0221.B02.1706261516
 - MP61.88Z.0117.B01.1706261354
 - IM161.88Z.0209.B02.1706261516
 - IM162.88Z.0209.B02.1706261516
 - IM171.88Z.0106.B01.1706260138
 - IM181.88Z.0147.B01.1706251744
 - IM183.88Z.0147.B01.1706251744
 - MB101.88Z.0150.B01.1706260154
 - MB81.88Z.0165.B01.1706261516
 - MB91.88Z.0155.B01.1706260138
 - MBA71.88Z.0167.B01.1706261032
 - MBP114.88Z.0173.B01.1706261516
 - MBP121.88Z.0168.B01.1706261516
 - MBP131.88Z.0206.B01.1706260154
 - MBP132.88Z.0227.B01.1706260154
 - MBP133.88Z.0227.B01.1706260154
 - MBP141.88Z.0161.B01.1706251744
 - MBP142.88Z.0161.B01.1706251744
 - MBP143.88Z.0161.B01.1706252330


SMCJSONs:

 - Mac-031B6874CF7F642A: 2.14f24
 - Mac-189A3D4F975D5FFC: 2.16f68
 - Mac-27ADBB7B4CEE8E61: 2.15f7
 - Mac-2BD1B31983FE1663: 2.19f12
 - Mac-35C1E88140C3E6CF: 2.12f143
 - Mac-35C5E08120C7EEAF: 2.24f32
 - Mac-3CBD00234E554E41: 2.18f15
 - Mac-42FD25EABCABB274: 2.22f16
 - Mac-473D31EABEB93F9B: 2.36f97
 - Mac-65CE76090165799A: 2.33f10
 - Mac-66E35819EE2D0D05: 2.37f20
 - Mac-77EB7D7DAF985301: 2.17f7
 - Mac-7DF21CB3ED6977E5: 2.13f15
 - Mac-81E3E92DD6088272: 2.21f92
 - Mac-937CB26E2E02BB01: 2.27f2
 - Mac-9AE82516C7C6B903: 2.35f105
 - Mac-9F18E312C5C2BF0B: 2.26f2
 - Mac-A369DDC4E67F1C45: 2.31f36
 - Mac-A5C67F76ED83108C: 2.38f7
 - Mac-B809C3757DA9BB8D: 2.34f2
 - Mac-BE0E8AC46FE800CC: 2.25f87
 - Mac-DB15BD556843C820: 2.33f10
 - Mac-E43C1C25D4880AD6: 2.28f7
 - Mac-F60DEB81FF30ACF6: 2.20f18
 - Mac-FA842E06C61E91C5: 2.23f11
 - Mac-FFE5EF870D7BA81A: 2.32f20


FirmwareFeatures(Mask):

 - IM131.88Z.010C.B01.1706261419: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe005e137
 - IM141.88Z.0119.B01.1706261354: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe007e137
 - IM142.88Z.0119.B01.1706261827: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe007e137
 - IM143.88Z.0119.B01.1706261217: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe007e137
 - IM144.88Z.0180.B01.1706261218: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xf007e137
 - IM151.88Z.0208.B01.1706261354: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xf807e137
 - MBA41.88Z.0078.B01.1706261217: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xd005e137
 - MBA51.88Z.00F1.B01.1706261433: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe005e137
 - MBA61.88Z.0100.B01.1706261827: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe007e137
 - MBP101.88Z.00EF.B01.1706261418: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe005e137
 - MBP102.88Z.0107.B01.1706261827: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe005e137
 - MBP111.88Z.0139.B01.1706261010: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe807e137
 - MBP112.88Z.0139.B01.1706261355: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe807e137
 - MBP91.88Z.00D4.B01.1706261216: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xc005e137
 - MM51.88Z.0078.B01.1706261437: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xd005e137
 - MM61.88Z.0107.B01.1706261217: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe005e137
 - MP61.88Z.0117.B01.1706261354: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe807e136
 - IM171.88Z.0106.B01.1706260138: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e136
 - IM181.88Z.0147.B01.1706251744: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e136
 - IM183.88Z.0147.B01.1706251744: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e136
 - MB101.88Z.0150.B01.1706260154: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e13e
 - MB91.88Z.0155.B01.1706260138: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e13e
 - MBP131.88Z.0206.B01.1706260154: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e136
 - MBP132.88Z.0227.B01.1706260154: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e136
 - MBP133.88Z.0227.B01.1706260154: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e13e
 - MBP141.88Z.0161.B01.1706251744: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e136
 - MBP142.88Z.0161.B01.1706251744: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e136
 - MBP143.88Z.0161.B01.1706252330: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e13e

 

 

 

New SMBIOS for my iMac 10,1 is now: IM101.88Z.00CD.B01.1706261549

 

what I have set FirmwareFeatures(Mask), FirmwareFeatures, PlatformFeature (there is not info)?

 

I use 10.13 DP2 version 17A291 and not show update in Mac App Store about "DP2 Update 1", please help  

 

clover 4102 

Bios date set: 06/26/17

------------------------------

 

:happymac:  Solved error installed script download DP2 update 1 from https://github.com/Piker-Alpha/HandyScripts/blob/master/install_1013_DP2_17A291m.sh

:thanks_speechbubble: Pike-Alpha https://github.com/Piker-Alpha/HandyScripts

Share this post


Link to post
Share on other sites

New SMBIOS for my iMac 10,1 is now: IM101.88Z.00CD.B01.1706261549

 

what I have set FirmwareFeatures(Mask), FirmwareFeatures, PlatformFeature (there is not info)?

 

I use 10.13 DP2 and not show update in Mac App Store about "DP2 Update 1", please help

 

clover 4102

Bios date set: 06/26/17

What is your build number?

 

Sent from my SM-G930F using Tapatalk

Share this post


Link to post
Share on other sites

Changed my mind. Testing latest clover 4102 I think with 0x02 platformfeature with USB install.

 

Edit: Still the same outcome with OSInstall.mpkg error.

 

Sent from my SM-G930F using Tapatalk

Did you try skylake or kabylake smbios?

Now, skylake system doesnt have osinstall.mpkg error when install fresh HS beta2 update1

 

나의 LG-F800S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites

Did you try skylake or kabylake smbios?

Now, skylake system doesnt have osinstall.mpkg error when install fresh HS beta2 update1

 

나의 LG-F800S 의 Tapatalk에서 보냄

Skylake smbios on Haswell laptop?

I'm willing to try, will post results when I do.

 

Sent from my SM-G930F using Tapatalk

Share this post


Link to post
Share on other sites

@Sherlocks

 

I think I found the cause of the problem on my rig. I've been doing some more test for about 7 hours with different settings and FF,FFM and PF and none of them worked. So it got me thinking that what might be the cause.

It's "EmuVariableUefi-64.efi" without it I can install macOS High Sierra DP2 Update 1 from USB without a hiccup.

 

I tested the iMac 13,1 iMac13,2 iMac 17,1 iMac18,1 MacPro6,1 and all of them work perfectly fine on my rig with clover's default values, no additional FF or PFF or PlatformFeature

 

So that's conclude the test I've been doing so far.

 

and to the guys whom are experiencing the OSInstall.mpkg error please test the installer without the EmuVariableUefi-64.efi installed and let me know if it worked out for you as well.

 

These tests were conducted on my Asus P8H77-M LE, Core i3 3210, R9 270X GPU with all the other hard disk attached to the mainboard.

 

Cheers.

 

Update I've been using clover 4102 for all the test and it works perfectly fine  :yes:

Share this post


Link to post
Share on other sites

@Sherlocks

 

I think I found the cause of the problem on my rig. I've been doing some more test for about 7 hours with different settings and FF,FFM and PF and none of them worked. So it got me thinking that what might be the cause.

It's "EmuVariableUefi-64.efi" without it I can install macOS High Sierra DP2 Update 1 from USB without a hiccup.

 

I tested the iMac 13,1 iMac13,2 iMac 17,1 iMac18,1 MacPro6,1 and all of them work perfectly fine on my rig with clover's default values, no additional FF or PFF or PlatformFeature

 

So that's conclude the test I've been doing so far.

 

and to the guys whom are experiencing the OSInstall.mpkg error please test the installer without the EmuVariableUefi-64.efi installed and let me know if it worked out for you as well.

 

These tests were conducted on my Asus P8H77-M LE, Core i3 3210, R9 270X GPU with all the other hard disk attached to the mainboard.

 

Cheers.

 

Update I've been using clover 4102 for all the test and it works perfectly fine :yes:

Okay we need to wait other's report like you said.

 

Thank you for hard work and test.

 

 

 

 

나의 LG-F800S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites

Okay we need to wait other's report like you said.

 

Thank you for hard work and test.

 

 

 

 

나의 LG-F800S 의 Tapatalk에서 보냄

You're welcome my friend :)

 

Thanks to you and other hardworking coders of the community for the great job that you are doing with clover and making hackintosh possible. You guys are the best  :)  :yes:

Share this post


Link to post
Share on other sites

@Sherlocks

 

I think I found the cause of the problem on my rig. I've been doing some more test for about 7 hours with different settings and FF,FFM and PF and none of them worked. So it got me thinking that what might be the cause.

It's "EmuVariableUefi-64.efi" without it I can install macOS High Sierra DP2 Update 1 from USB without a hiccup.

 

I tested the iMac 13,1 iMac13,2 iMac 17,1 iMac18,1 MacPro6,1 and all of them work perfectly fine on my rig with clover's default values, no additional FF or PFF or PlatformFeature

 

So that's conclude the test I've been doing so far.

 

and to the guys whom are experiencing the OSInstall.mpkg error please test the installer without the EmuVariableUefi-64.efi installed and let me know if it worked out for you as well.

 

These tests were conducted on my Asus P8H77-M LE, Core i3 3210, R9 270X GPU with all the other hard disk attached to the mainboard.

 

Cheers.

 

Update I've been using clover 4102 for all the test and it works perfectly fine  :yes:

 

Whooa.. I didn't test it yet with UEFI on my mach, my bad.  :lol: So it means Beta version of 10.13 till date can only be installed on UEFI? Since, on my Legacy-GPT I never used "EmuVariableUefi-64.efi". Wanna retry again with r4102. Nice info (y)

Share this post


Link to post
Share on other sites

@Sherlocks

 

I think I found the cause of the problem on my rig. I've been doing some more test for about 7 hours with different settings and FF,FFM and PF and none of them worked. So it got me thinking that what might be the cause.

It's "EmuVariableUefi-64.efi" without it I can install macOS High Sierra DP2 Update 1 from USB without a hiccup.

 

I tested the iMac 13,1 iMac13,2 iMac 17,1 iMac18,1 MacPro6,1 and all of them work perfectly fine on my rig with clover's default values, no additional FF or PFF or PlatformFeature

 

So that's conclude the test I've been doing so far.

 

and to the guys whom are experiencing the OSInstall.mpkg error please test the installer without the EmuVariableUefi-64.efi installed and let me know if it worked out for you as well.

 

These tests were conducted on my Asus P8H77-M LE, Core i3 3210, R9 270X GPU with all the other hard disk attached to the mainboard.

 

Cheers.

 

Update I've been using clover 4102 for all the test and it works perfectly fine  :yes:

share please clover pkg and efi folder)

@Sherlocks

 

I think I found the cause of the problem on my rig. I've been doing some more test for about 7 hours with different settings and FF,FFM and PF and none of them worked. So it got me thinking that what might be the cause.

It's "EmuVariableUefi-64.efi" without it I can install macOS High Sierra DP2 Update 1 from USB without a hiccup.

 

I tested the iMac 13,1 iMac13,2 iMac 17,1 iMac18,1 MacPro6,1 and all of them work perfectly fine on my rig with clover's default values, no additional FF or PFF or PlatformFeature

 

So that's conclude the test I've been doing so far.

 

and to the guys whom are experiencing the OSInstall.mpkg error please test the installer without the EmuVariableUefi-64.efi installed and let me know if it worked out for you as well.

 

These tests were conducted on my Asus P8H77-M LE, Core i3 3210, R9 270X GPU with all the other hard disk attached to the mainboard.

 

Cheers.

 

Update I've been using clover 4102 for all the test and it works perfectly fine  :yes:

share please clover pkg and efi folder)

Share this post


Link to post
Share on other sites

Whooa.. I didn't test it yet with UEFI on my mach, my bad.  :lol: So it means Beta version of 10.13 till date can only be installed on UEFI? Since, on my Legacy-GPT I never used "EmuVariableUefi-64.efi". Wanna retry again with r4102. Nice info (y)

You won't need EmuVariableUEFI-64.efi for Legacy BIOS anyway. you can test macOS High Sierra on your machine, but the EFI folder I posted is for UEFI :)

 

share please clover pkg and efi folder)

share please clover pkg and efi folder)

Clover 4102 and the EFI folder might not work on your system you might need to make lots of optimizations to the config.plist but here it is 

EFI.zip

Share this post


Link to post
Share on other sites

You won't need EmuVariableUEFI-64.efi for Legacy BIOS anyway. you can test macOS High Sierra on your machine, but the EFI folder I posted is for UEFI :)

 

Clover 4102 and the EFI folder might not work on your system you might need to make lots of optimizations to the config.plist but here it is 

 

thanks. I managed to install beta1 but beta2 definitely changed something) stuck +++++

You won't need EmuVariableUEFI-64.efi for Legacy BIOS anyway. you can test macOS High Sierra on your machine, but the EFI folder I posted is for UEFI :)

 

Clover 4102 and the EFI folder might not work on your system you might need to make lots of optimizations to the config.plist but here it is 

 

thanks. I managed to install beta1 but beta2 definitely changed something) stuck +++++

Share this post


Link to post
Share on other sites

thanks. I managed to install beta1 but beta2 definitely changed something) stuck +++++

 

 

make sure you have OsxAptioFix2Drv-64 installed.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By y010204025
      Perhaps it was the first NEC (Lenovo) Lavie Z HZ550 to install hackintosh. I hope more people who like Lavie Z series can experience Hackintosh at HZ550. She is really great.
       
      I found HZ550 & HZ750 on the Chinese website, which is amazing. It weighs only 790g, 13.3 inches, and the standard 2k screen, which is too attractive to me. I am a Hackintosh enthusiast. I think HZ550 or HZ750 with MacOS is the best Unfortunately, the Lavie Z series is not listed in China, only exists in the Japanese and American markets, and in the Japanese market is the NEC brand, while the American market uses the Lenovo logo.
       
      Fortunately, I got an HZ550 from Taobao. Yes, not HZ750. In comparison, HZ750 has more touch screens and 360 ° flip. These are hard to attract me. More importantly, HZ750 is about 200g heavier than HZ550 That's why I chose HZ550. Well, because he is only 2,000 RMB.
       
      The specific introduction can refer to NEC Japan official website:http://nec-lavie.jp/products/hz13b/
       
      The HZ550 hardware list I obtained:
                                    
                       -/+:.          ningnan@ningnandeMacBook-Air
                      :++++.          OS: 64bit Mac OS X 10.15.5 19F96
                     /+++/.           Kernel: x86_64 Darwin 19.5.0
             .:-::- .+/:-``.::-       Uptime: 19m
          .:/++++++/::::/++++++/:`    Packages: 1
        .:///////////////////////:`   Shell: zsh 5.7.1
        ////////////////////////`     Resolution: 3840x2160
       -+++++++++++++++++++++++`      DE: Aqua
       /++++++++++++++++++++++/       WM: Quartz Compositor
       /sssssssssssssssssssssss.      WM Theme: Blue (Dark)
       :ssssssssssssssssssssssss-     Disk: 11G / 108G (12%)
        osssssssssssssssssssssssso/`  CPU: Intel Core i7-5500U @ 2.40GHz
        `syyyyyyyyyyyyyyyyyyyyyyyy+`  GPU: Intel Iris Graphics 6100
         `ossssssssssssssssssssss/    RAM: 4376MiB / 8192MiB
           :ooooooooooooooooooo+.    
            `:+oo+/:-..-:/+o+/-     
       
       
      Advantages: small size, light weight, 2K screen, 8G memory, 512g SSD, keyboard feels good, and wireless network card can be replaced, which is unimaginable in today's thin and light books.
      Disadvantages: The sound is small, almost the same as the mosquitoes.
       
      Ok, bragging is over!
      In order to use the wireless network, I changed the wireless network card from inter 7265 to BCM94352ZAE. Some people called it DW1560. It is uncomfortable that in China, this card and his elder brother DW1830 were hyped to a high price of 480RMB. of. Fortunately, I bought it early, and this card is also very stable under win10, and there is no high delay and outage. The hard disk should be PM951 of Samsung, not PM981, which is lucky.   Before installing Hackintosh: You need to prepare a 16G U disk, SanDisk is not a rough choice for making MacOS installation disk, I used the latest MacOS Catalina 10.15.5, got config.plist from Rehabman, and put together an EFI, the latest version of clover and kext drivers. Thanks to Rehabman and the developers of the Black Apple community. I do n’t like that OC team very much.
      Make an installation disk: If you have a computer running MacOS, you can use the command line to make it, if you do n’t have a computer running MacOS, you can try VMware, I know that the insanelymac forum allows discussion, or use ether to write the image to U disk, use the EFI I provided to boot into the installation process.   BIOS setting: Press F12 at boot to enter the BIOS settings, Tab switches to "Security-Secure boot", set to "DISable", this is what we need, and switch to "Boot -Boot devices", set the U disk as the first boot item You can directly enter the clover guide interface, please follow it for google it.
      It is worth noting that the remaining space of your EFI partition needs to be greater than 200M, otherwise, the disk format will be wrong. In addition, the format partition format is APFS, do not choose to encrypt, your data is not valuable, at least you must have this awareness of Hackintosh, the file safe is also the same, do not enable, do not use to find your mac, otherwise, change the machine, OK .   Fortunately, no additional ssdt patch is required. All the patch functions are implemented through clover. The flat Apple is turned on. This is to solve the problem of the flower screen. You can find a solution yourself.
      Experience your black apple, this will bring a better experience than MacBook Pro. EFI_HZ550.zip
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
       
      -Donation with Mercado Livre 
      https://tinyurl.com/y9evkj5u
       
       
      --Original Topic--
      https://www.olarila.com/topic/6874-olarila-hackbook-lenovo-ideapad-s145-mojave-catalina-full-dsdt-patches/
       

       
      -Perfect HackBook, HDMI Audio/Video, Bluetooth, AirPlay, Sleep, Lid Sleep, Auto Sleep, Audio, etc!
      -Wifi card has been replaced with Dell DW1560!
      -I'm using a S145-15IWL Model with Intel Core i5 8265u / Intel UHD Graphics 620
      -Update bios/uefi to last version
       
      --Installation--
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Clover Folder--
      https://tinyurl.com/rkqmpd9
       
      --OpenCore Folder--
      https://tinyurl.com/y75hqg7z
       
      Bluetooth Broadcom
      Bluetooth Broadcom.zip
       
      CPUFriend for i5-8265U
      CPUFriend i5-8265U.zip
       
      --Full DSDT Patches--
      -My DSDT
      DSDT Lenovo IdeaPad S145.zip
       
      This DSDT work on S145-14IWL, S145-15IWL, V14-IWL, V15-IWL models
      -Patches
      -FIX ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 11 ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PRWs -_DSMs -PNLF -BRIGHTNESS KEYS -I2C -NATIVE USB -ARPT -GFX0 -DTGP -kUSBCompanionIndex -io-device-location -FULL RENAMED DEVICES   --IGPU Patch--
      Video solution with HDMI Audio and Video
      <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,GfxYTile</key> <data> AQAAAA== </data> <key>AAPL,ig-platform-id</key> <data> CQClPg== </data> <key>device-id</key> <data> pT4AAA== </data> <key>enable-hdmi20</key> <data> AQAAAA== </data> <key>framebuffer-con0-alldata</key> <data> AAAIAAIAAACYAAAA </data> <key>framebuffer-con0-enable</key> <integer>1</integer> <key>framebuffer-con1-alldata</key> <data> AQEJAAAIAADHAQAA </data> <key>framebuffer-con1-enable</key> <integer>1</integer> <key>framebuffer-con2-alldata</key> <data> AgYKAAAEAADHAQAA </data> <key>framebuffer-con2-enable</key> <integer>1</integer> <key>framebuffer-fbmem</key> <data> AACQAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-stolenmem</key> <data> AAAwAQ== </data> <key>framebuffer-unifiedmem</key> <data> AAAAgA== </data> <key>hda-gfx</key> <string>onboard-1</string> <key>model</key> <string>Intel Corporation, Iris Plus Graphics 655</string> </dict>   --Native USB Fix for Notebooks - No Injector/Kext Required--
      https://www.olarila.com/topic/6878-guide-native-usb-fix-for-notebooks-no-injectorkext-required/
      https://www.olarila.com/topic/6181-guide-native-usb-fix-for-desktops-no-injectorkext-required-skylake/
       
       
      -ScreenShots

































      -Links
       
       
      Clover https://github.com/CloverHackyColor/CloverBootloader
      AirportBrcmFixup.kext https://github.com/acidanthera/AirportBrcmFixup
      AppleALC.kext https://github.com/acidanthera/AppleALC
      Brcm Bluetooth https://github.com/acidanthera/BrcmPatchRAM
      Lilu.kext https://github.com/acidanthera/Lilu
      SystemProfilerMemoryFixup.kext https://github.com/Goldfish64/SystemProfilerMemoryFixup
      VirtualSMC.kext https://github.com/acidanthera/VirtualSMC
      VoodooI2C.kext https://github.com/alexandred/VoodooI2C
      VoodooPS2Controller.kext https://github.com/acidanthera/VoodooPS2
      WhateverGreen.kext https://github.com/acidanthera/WhateverGreen
      MaciASL - https://github.com/acidanthera/MaciASL
      acpica - https://github.com/acpica/acpica
      AptioMemoryFix.efi https://github.com/acidanthera/AptioFixPkg
      ApfsDriverLoader.efi https://github.com/acidanthera/AppleSupportPkg
      HFSPlus.efi https://github.com/JrCs/CloverGrowerPro/blob/master/Files/HFSPlus/X64/HFSPlus.efi?raw=true
      Hackintool https://github.com/headkaze/Hackintool
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
       
      We're all here to have fun and learn from each other!
    • By fantomas
      macOS Catalina 10.15.5
       
      macOS Catalina 10.15.5 introduces battery health management in the Energy Saver settings for notebooks, a new option to disable automatic prominence in Group FaceTime calls, and controls to fine-tune the built-in calibration of your Pro Display XDR. The update also improves the stability, reliability, and security of your Mac. 
       
      Battery Health Management
      Battery health management to help maximize battery lifespan for Mac notebooks Energy Saver preference pane now displays battery condition and recommends if the battery needs to be serviced Option to disable battery health management For more information, please visit https://support.apple.com/kb/HT211094
       
      FaceTime Prominence Preference 
      New option to control automatic prominence on Group FaceTime calls, so video tiles do not change size when a participant speaks  
      Calibration Fine-Tuning for Pro Display XDR
      Controls to fine-tune the built-in calibration of your Pro Display XDR by adjusting the white point and luminance for a precise match to your own display-calibration target  
      This update also includes bug fixes and other improvements:
      Fixes an issue that may prevent Reminders from sending notifications for recurring reminders Addresses an issue that may prevent password entry on the login screen Fixes an issue where System Preferences would continue to show a notification badge even after installing an update Resolves an issue where the built-in camera may not be detected when trying to use it after using a video conferencing app Addresses an issue for Mac computers with the Apple T2 Security Chip where internal speakers may not appear as a sound output device in Sound preferences Fixes a stability issue with uploading and downloading media files from iCloud Photo Library while your Mac is asleep Resolves a stability issue when transferring large amounts of data to RAID volumes Fixes an issue where the Reduced Motion Accessibility preference did not reduce the speed of animations in a Group FaceTime call  
      Enterprise content:
      Improves performance on certain Mac models when enabling hardware acceleration in GPU-intensive apps such as those used for video conferencing Addresses an issue where Microsoft Exchange accounts were unable to sign in during account setup when using Conditional Access Apple Push Notification Service traffic now uses a web proxy when specified in a PAC file via the Proxies payload Resolves an issue that prevented some displays connected to MacBook Pro (16-inch, 2019) from waking from sleep when the Mac wakes Major new releases of macOS are no longer hidden when using the softwareupdate(8) command with the  --ignore flag This change also affects macOS Mojave and macOS High Sierra after installing Security Update 2020-003.
       
      macOS Catalina 10.15.5 (19F96)
       
      Update
      Combo
       
      View full article
       
    • By fantomas
      macOS Catalina 10.15.5
      macOS Catalina 10.15.5 introduces battery health management in the Energy Saver settings for notebooks, a new option to disable automatic prominence in Group FaceTime calls, and controls to fine-tune the built-in calibration of your Pro Display XDR. The update also improves the stability, reliability, and security of your Mac. 
      Battery Health Management
      Battery health management to help maximize battery lifespan for Mac notebooks Energy Saver preference pane now displays battery condition and recommends if the battery needs to be serviced Option to disable battery health management For more information, please visit https://support.apple.com/kb/HT211094
      FaceTime Prominence Preference 
      New option to control automatic prominence on Group FaceTime calls, so video tiles do not change size when a participant speaks Calibration Fine-Tuning for Pro Display XDR
      Controls to fine-tune the built-in calibration of your Pro Display XDR by adjusting the white point and luminance for a precise match to your own display-calibration target This update also includes bug fixes and other improvements:
      Fixes an issue that may prevent Reminders from sending notifications for recurring reminders Addresses an issue that may prevent password entry on the login screen Fixes an issue where System Preferences would continue to show a notification badge even after installing an update Resolves an issue where the built-in camera may not be detected when trying to use it after using a video conferencing app Addresses an issue for Mac computers with the Apple T2 Security Chip where internal speakers may not appear as a sound output device in Sound preferences Fixes a stability issue with uploading and downloading media files from iCloud Photo Library while your Mac is asleep Resolves a stability issue when transferring large amounts of data to RAID volumes Fixes an issue where the Reduced Motion Accessibility preference did not reduce the speed of animations in a Group FaceTime call Enterprise content:
      Improves performance on certain Mac models when enabling hardware acceleration in GPU-intensive apps such as those used for video conferencing Addresses an issue where Microsoft Exchange accounts were unable to sign in during account setup when using Conditional Access Apple Push Notification Service traffic now uses a web proxy when specified in a PAC file via the Proxies payload Resolves an issue that prevented some displays connected to MacBook Pro (16-inch, 2019) from waking from sleep when the Mac wakes Major new releases of macOS are no longer hidden when using the softwareupdate(8) command with the  --ignore flag This change also affects macOS Mojave and macOS High Sierra after installing Security Update 2020-003.
       
      macOS Catalina 10.15.5 (19F96)
       
      Update
      Combo
    • By fantomas
      Version finale... macOS Catalina 10.15.5 (19F96)
×