Jump to content
fantomas

[pre-release] macOS High Sierra

3,845 posts in this topic

Recommended Posts

Advertisement

All seems ok for me except the sound :

 

Witch way should  i use  in 10.13 :

 

- Voodoohda ?

 

- ALC887 patch ?

Share this post


Link to post
Share on other sites

All seems ok for me except the sound :

 

Witch way should  i use  in 10.13 :

 

- Voodoohda ?

 

- ALC887 patch ?

AppleALC and Lilu with the -alcbeta and -lilubeta boot flags.

Share this post


Link to post
Share on other sites

AppleALC and Lilu with the -alcbeta and -lilubeta boot flags.

 

Ok thank's , i'll try this.

Share this post


Link to post
Share on other sites

You're welcome :)

 

Just remember to add the proper layout id in your config.plist under Devices/Audio.

 

Would you explain to me ?

Share this post


Link to post
Share on other sites

it's most likely layout id 1.

you can send me your IOReg just to make sure.

 

Ok  :thumbsup_anim:

Share this post


Link to post
Share on other sites

Would you explain to me ?

You can either add "1" as the layout ID or you can choose "detect" from clover configurator like shown in the picture and clover will detect the correct layout ID for your Audio device.

post-1011040-0-92596100-1498933085_thumb.png

Share this post


Link to post
Share on other sites

You can either add "1" as the layout ID or you can choose "detect" from clover configurator like shown in the picture and clover will detect the correct layout ID for your Audio device.

 

Done , rebooted   : all is ok !!! :thumbsup_anim:

 

( i put the last lilu and appleALC in clover/kext/other )

Share this post


Link to post
Share on other sites

At the same time i made some change in my config.plist :

 

- Igpu Haswell GT1 1536 mo ok

- rx 460 2Gb  ok


One question : how in the forum can i talk about ( official ) app i use for my job with my hack : for exemple i used in Sierra Dassault Draffsight for DAO  ?

post-1879825-0-14299600-1498934044_thumb.png

Share this post


Link to post
Share on other sites

Looking forward to your results. :)

 

By the way, did you change the Board-ID? Cause, I've got a feeling that might have a bigger impact than the BIOS release date. I could be very much wrong. But, I don't know. It's just what my gut says.

No, I changed nothing except the BiosVersion, and now BiosReleaseDate to match.

 

I've just clean reinstalled Sierra and so far so good. No problem with iCloud. Now to try High Sierra.

Share this post


Link to post
Share on other sites

At the same time i made some change in my config.plist :

 

- Igpu Haswell GT1 1536 mo ok

- rx 460 2Gb  ok

One question : how in the forum can i talk about ( official ) app i use for my job with my hack : for exemple i used in Sierra Dassault Draffsight for DAO  ?

I'm not quite sure what you mean. we can talk about apps and hardware the way we feel like to as long as we respect the rules, and we don't talk about pirated apps and we don't share links against the forum rules or about the pirated apps.

 

For more information you can see the rules.

     VERY IMPORTANT: PLEASE READ! (ABOUT TONYMACX86 AND iATKOS M / Y / EC / SR)    

Share this post


Link to post
Share on other sites

At the same time i made some change in my config.plist :

 

- Igpu Haswell GT1 1536 mo ok

- rx 460 2Gb ok

 

One question : how in the forum can i talk about ( official ) app i use for my job with my hack : for exemple i used in Sierra Dassault Draffsight for DAO ?

Give me your clover log. I want to check your log.

 

나의 LG-F800S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites

Give me your clover log. I want to check your log.

 

나의 LG-F800S 의 Tapatalk에서 보냄

 

Ok : i must reboot  ?

Share this post


Link to post
Share on other sites

Ok : i must reboot ?

No. Just get cloverlog and attach log here.

I wonder your intel graphic accelation no problem? What is your graphic in windows? Model name

 

나의 LG-F800S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites

I'm not quite sure what you mean. we can talk about apps and hardware the way we feel like to as long as we respect the rules, and we don't talk about pirated apps and we don't share links against the forum rules or about the pirated apps.

 

For more information you can see the rules.

     VERY IMPORTANT: PLEASE READ! (ABOUT TONYMACX86 AND iATKOS M / Y / EC / SR)    

 

No mind to brake the rules : also to take exeprience for app : i my job ( building and architecture) the great subject is IFC : it's used for all the members off buiding team : my interest is for developp and use such features.

Share this post


Link to post
Share on other sites

By the way, why did we need to change BIOS version and Release Date? I can boot just fine with the old information. In High Sierra, on APFS. I'm only curious if that information is crucial for something. Cause I can't remember what was it. Was it for installation only?

Share this post


Link to post
Share on other sites

No mind to brake the rules : also to take exeprience for app : i my job ( building and architecture) the great subject is IFC : it's used for all the members off buiding team : my interest is for developp and use such features.

You can use any application that you like, but I don't think you'll be getting any support for them here. (Or I just might be wrong :))

 

A lot of people use their hackintoshes for daily use, they use apple's apps, they use adobe's etc. You are not obligated to limit your experience by any rules here. 

By the way, why did we need to change BIOS version and Release Date? I can boot just fine with the old information. In High Sierra, on APFS. I'm only curious if that information is crucial for something. Cause I can't remember what was it. Was it for installation only?

IMHO having the most accurate hardware info will help to improve the overall performance and stability, it's not just crucial for installing macOS but it will help to keep the system more reliable and it will use the hardware resources much better.

Share this post


Link to post
Share on other sites

No. Just get cloverlog and attach log here.

I wonder your intel graphic accelation no problem? What is your graphic in windows? Model name

 

나의 LG-F800S 의 Tapatalk에서 보냄

 

Ok  : i don't use windows with this build  where is locate bootlog  or wiitch command may i use ?

To Sherlocks :

post-1879825-0-54720600-1498940981_thumb.png

post-1879825-0-12852400-1498941027_thumb.png

post-1879825-0-13403100-1498941149_thumb.png

post-1879825-0-84987500-1498941166_thumb.png

Share this post


Link to post
Share on other sites

It's automatic

It's in the source

Just try with product only (like iMac14,2)

 

For example, last commit updated some info

https://sourceforge.net/p/cloverefiboot/code/4101/

 

I was thinking of a more user friendly way of adding that information. :) But something built into Clover. Maybe into Clover UI. Or the preference pane. I don't know.

 

Cause, especially for new users, it's not clear which SMBIOS should they chose and why. Also, in order to use iMac14,2 you need to be aware of its existence. You need to know that you can use it. And how you can use it. Meaning, to have it as an option you can select (like you have with Clover Configurator). This is why a lot of people use it. Clover has the SMBIOS embedded into its DNA. Which is awesome. But...there is no easy way to access it.

 

I mean, in order to select iMac14,2,for example, you need to know what an iMac14,2 is, you need to be aware of the syntax when adding it to the config, and all that doesn't come easy for a new user. Or any regular user, for that matter.

 

Anyway, it's still good know that the information is there. Even if it's not very user friendly to get to it. :)

 

Thank you!

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By NikTheNoob
      Hi,
       
      I'm rather new to Hackintosh and trying my first build with OpenCore on AMD, but I run into issues causing OpenCore to crash before even loading the macOS installer. As I'm not sure which one is causing the crash, I'm trying to resolve all of them and one of the error messages has to do with WhateverGreen, which I was able to see in this slow-mo loading video. Basically I'm getting an error that I'm running an unsupported processor, even though I think I was following this guide by the step.
      What could be causing this and what do I need to do to resolve it?
       
      CPU: AMD Ryzen 2700X
      MB: Gigabyte Aorus X470 Ultra Gaming
      Memory: 4x8 GB HyperX Predator, 3000 MHz Cl15
      Storage: Samsung Evo 970 Nvme 512 GB, Crucial MX500 500GB SATA
      GPU: MSI Radeon RX580 GamingX 8GB
    • By MaLd0n
      --Donations via PayPal--
      https://tinyurl.com/r2bvzm7
       
      --Original Topic--
      https://www.olarila.com/topic/6874-olarila-hackbook-lenovo-ideapad-s145-mojave-catalina-full-dsdt-patches/
       

       
      -Perfect HackBook, HDMI Audio/Video, Bluetooth, AirPlay, Sleep, Lid Sleep, Auto Sleep, Audio, etc!
      -Wifi card has been replaced with Dell DW1560!
      -I'm using a S145-15IWL Model with Intel Core i5 8265u / Intel UHD Graphics 620
      -Update bios/uefi to last version
       
      --Installation--
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Clover Folder--
      Just paste EFI folder inside EFI partition
      https://www.olarila.com/files/Clover.Folder/Lenovo IdeaPad S145.zip
      Notebooks with ELAN trackpad use it with my folder above
      IdeaPad S145 ELAN.zip
       
      Bluetooth Broadcom
      Bluetooth Broadcom.zip
       
      CPUFriend for i5-8265U
      CPUFriend i5-8265U.zip
       
      --Full DSDT Patches--
      -My DSDT
      DSDT Lenovo IdeaPad S145.zip
       
      This DSDT work on S145-14IWL, S145-15IWL, V14-IWL, V15-IWL models
      -Patches
      -FIX ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 11 ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PRWs -_DSMs -PNLF -BRIGHTNESS KEYS -I2C -NATIVE USB -ARPT -GFX0 -DTGP -kUSBCompanionIndex -io-device-location -FULL RENAMED DEVICES   --IGPU Patch--
      Video solution with HDMI Audio and Video
      <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,GfxYTile</key> <data> AQAAAA== </data> <key>AAPL,ig-platform-id</key> <data> CQClPg== </data> <key>device-id</key> <data> pT4AAA== </data> <key>enable-hdmi20</key> <data> AQAAAA== </data> <key>framebuffer-con0-alldata</key> <data> AAAIAAIAAACYAAAA </data> <key>framebuffer-con0-enable</key> <integer>1</integer> <key>framebuffer-con1-alldata</key> <data> AQEJAAAIAADHAQAA </data> <key>framebuffer-con1-enable</key> <integer>1</integer> <key>framebuffer-con2-alldata</key> <data> AgYKAAAEAADHAQAA </data> <key>framebuffer-con2-enable</key> <integer>1</integer> <key>framebuffer-fbmem</key> <data> AACQAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-stolenmem</key> <data> AAAwAQ== </data> <key>framebuffer-unifiedmem</key> <data> AAAAgA== </data> <key>hda-gfx</key> <string>onboard-1</string> <key>model</key> <string>Intel Corporation, Cannon Point-LP Iris Plus Graphics 655</string> </dict>   --Native USB Fix for Notebooks - No Injector/Kext Required--
      https://www.olarila.com/topic/6878-guide-native-usb-fix-for-notebooks-no-injectorkext-required/
      https://www.olarila.com/topic/6181-guide-native-usb-fix-for-desktops-no-injectorkext-required-skylake/
       
       
      -ScreenShots

































      -Links
       
       
      Clover https://github.com/CloverHackyColor/CloverBootloader
      AirportBrcmFixup.kext https://github.com/acidanthera/AirportBrcmFixup
      AppleALC.kext https://github.com/acidanthera/AppleALC
      Brcm Bluetooth https://github.com/acidanthera/BrcmPatchRAM
      Lilu.kext https://github.com/acidanthera/Lilu
      SystemProfilerMemoryFixup.kext https://github.com/Goldfish64/SystemProfilerMemoryFixup
      VirtualSMC.kext https://github.com/acidanthera/VirtualSMC
      VoodooI2C.kext https://github.com/alexandred/VoodooI2C
      VoodooPS2Controller.kext https://github.com/acidanthera/VoodooPS2
      WhateverGreen.kext https://github.com/acidanthera/WhateverGreen
      MaciASL - https://github.com/acidanthera/MaciASL
      acpica - https://github.com/acpica/acpica
      AptioMemoryFix.efi https://github.com/acidanthera/AptioFixPkg
      ApfsDriverLoader.efi https://github.com/acidanthera/AppleSupportPkg
      HFSPlus.efi https://github.com/JrCs/CloverGrowerPro/blob/master/Files/HFSPlus/X64/HFSPlus.efi?raw=true
      Hackintool https://github.com/headkaze/Hackintool
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
       
      We're all here to have fun and learn from each other!
    • By fantomas
      macOS Catalina 10.15.4 beta (19E224g)
    • By MaLd0n
      ---TUTORIAL---
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Original Post--
      https://www.olarila.com/topic/6531-olarila-hackbeast-z390-designare-thunderbolt-full-dsdt-patches-clover-opencore/
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://www.olarila.com/topic/6364-mojave-catalina-on-mobos-series-100200300-with-opencore-bootloader/
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By NoEnd
      Hi team,
       
      I'm looking for the best route to achieve this upgrade, so I have been stuck with HS since Nvidia drivers stopped being supported on newer MacOS releases. Now I'm having an AMD 5700 xt on the way and want to plan the upgrade properly. I have added some information below and questions that might help with your recommendation.
       
      Current GPU 1080 ti with Nvidia webdrivers installed. So should I uninstall the webdriver before adding the new GPU? Clover is being used and EFI attached. Any kext must be removed? or parameters adjusted MacOS HS 10.13.6, should I upgrade before using the new GPU? CPU: 9900K Motherboard:ROG MAXIMUS XI HERO (WI-FI) Dual Monitors I have a Time machine backup, Do you recommend a fresh install? and If I did, will I be able to restore my data/apps as-is?  
      Please let yourself free to explore further aspects to considers.
      EFI-20200204.zip
×