Jump to content
fantomas1

[pre-release] macOS High Sierra

3,845 posts in this topic

Recommended Posts

Advertisement

 

I was able to boot to the installer using CloverX64-High.efi and apfs.efi in the Clover64UEFI folder.  I had to boot with cpus=1 because the LAPIC patch did not work.  Kext injection did work and I was able to use RehabMan's voodoops2.kext and acpibattery.kext.  I don't think I had bluetooth or wifi.  I couldn't tell.  Either way, I hit a stumbling block and can't seem to get past it.  Anyone else run into this?

 

attachicon.gifIMG_3270.JPG

 

Got the same error with Enoch 2883 (-v -f) and MBR installing method, patched kernel as attached.

kernel_10.13.db1.17A264c.HP_lapic_native_XCPM.zip

Share this post


Link to post
Share on other sites

Some private stuff from latest apple firmware. Also APFS Jump Start driver

https://yadi.sk/d/_JdX6vPU3GeESy

UPD:

Updated APFS Jump Start driver

 

guid: CFFB32F4-C2A8-48BB-A0EB-6C3CCA3FE847

APFS.efi from /usr/standalone isn't designed to run manually, cause dat stuff runs via mechanism inside apple frmw or boot.efi

APFS.ffs.zip

Share this post


Link to post
Share on other sites

Second try  :P

 

 

img_1020.jpg

 

I format in Mac OS Extend Journalise  this is  Good?

 

Because APFS is available in Disk Utility  :yes:

 

 

same thing Error OSInstall.mpkg  :cry:

How did you get that far in the first place? I'm still stuck at kextd stall AppleACPICPU

 

Edit: I am able to enter the installer now, but "an error occurred while verifying firmware"

Share this post


Link to post
Share on other sites

If we're not using APFS I'm assuming it should be enough to fake the firmware features string Clover announces to make the installer think that the firmware supports APFS. Just a case of finding out what the correct value is.

You're absolutely right, but it won't solve OSInstall.mpkg error

PS: You can set FirmwareFeatures to ff ff ff ff bits, then validation will passed

Share this post


Link to post
Share on other sites

OSInstall.mpkg error is related to the bootable media which macOS is loaded from.

 

I just created a bootable USB using disk utility and then copied the "Package" folder manually and I got the same error on my MacBook Air, then I used createinstallmedia and it just booted to the installer with no error.

 

here is the terminal command I used to create the High Sierra bootable USB disk:

 

For the first developers preview:

sudo /Applications/Install\ macOS\ 10.13\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ macOS\ 10.13\ Beta.app —nointeraction

and

 

for the public beta

sudo /Applications/Install\ macOS\ High\ Sierra\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ macOS\ High\ Sierra\ Beta.app —nointeraction

Share this post


Link to post
Share on other sites

Setting FirmwareFeatures to 0xFFFFFFFF didn't pass validation here. I still got the unable to verify firmware error at second stage install. The log shows a different value for "ROM Features returned" but still follows that up with "ROM does not support APFS".

 

I've also replaced the apfs.efi in EFI with the JumpStart one extracted from the MBP91 firmware. Thanks for the GUID, I wasn't able to find the right module last night by searching the firmware in UEFITool.

 

Update: Setting FirmwareFeatures doesn't change the FirmwareFeaturesMask value. Maybe that's the problem. I tried setting it in nvram but Clover replaces it with its default value on reboot.

Share this post


Link to post
Share on other sites

I've installed macOS High Sierra too. Have the same problem with OSInstall.mpkg appears to be missing. Just restore image from real mac. 

Image was taken before user creation by @m-dudarev from applelife.ru [Link Removed]

Clover by @denskop Clover_r4079_High_Sierra.zip This version don't work on 10.12... Start it from USB drive.  

Intel HD 530 have the same problem as in 10.12.5. But Lilu.kext + IntelGraphicsFixup.kext deals with this :thumbsup_anim:

Used boot arguments for Lilu an Plugins 

-lilubeta -igfxbeta -alcbeta

Graphics is working. So smoooooth with metal2 :P

post-1069282-0-99965000-1496748207_thumb.png

Audio is working. ALC887 with AppleALC, HDMI - native with ig-platform-id 0x193b0000

post-1069282-0-40207100-1496748228_thumb.png

Don't work hardware acceleration on HD 530 with Shiki.kext and -shikigva bootarg. Problem is Shiki hangs entire system when open QuickTime or iTunes. Need further research. 

post-1069282-0-70091800-1496748273_thumb.png

Edited by Allan
Link removed - Remember of our forum rules

Share this post


Link to post
Share on other sites

So far, all those who posted screenshots of running 10.13 Hackintosh installations used a cloned image off a real Mac. That's of little use to most of us, except to state that it runs on PC platforms. But thanks Vanroiy2012 for stating this most important "detail"...  ;)

Share this post


Link to post
Share on other sites

How did you get that far in the first place? I'm still stuck at kextd stall AppleACPICPU

 

Edit: I am able to enter the installer now, but "an error occurred while verifying firmware"

What error ? same as mine ?

here the file I used with my error OSInstall.mpkg

CLOVERX64 from Applelife.ru 

Sierra 10.13.zip

Share this post


Link to post
Share on other sites

What error ? same as mine ?

here the file I used with my error OSInstall.mpkg

CLOVERX64 from Applelife.ru 

Thanks, but I figured it out already. I'm stuck at the OSInstall.mpkg error too. I'm making a manual USB install now. .Let's see how that will go. 

I guess it's because the Packages folder is in InstallESD.dmg, while the installer looks for it in BaseSystem.dmg. 

Share this post


Link to post
Share on other sites

What error ? same as mine ?

here the file I used with my error OSInstall.mpkg

CLOVERX64 from Applelife.ru 

Hi Chris1111,

 

Did you get passed kexts stall[0] error?

Share this post


Link to post
Share on other sites

Just for the temporary solution, you can patch OSInstaller to bypass firmware update and check's, but I'm not sure about this

JE - > JMP here

attachicon.gifСнимок экрана 2017-06-06 в 17.52.06.png

 

Nice try, but still error as same as OSInstall.mpkg.

Jun  6 20:53:31 localhost opendirectoryd[183]: opendirectoryd (build 465.000) launched - installer mode
Jun  6 20:53:36 localhost powerd[170]: powerd process is started
Jun  6 20:53:44 localhost Unknown[534]: kern.boottime: { sec = 1496782400, usec = 0 } Tue Jun  6 20:53:20 2017
Jun  6 20:54:13 iMac Installer Progress[177]: IASGetCurrentInstallPhaseList: Unable to get phases
Jun  6 20:54:13 iMac Installer Progress[177]: IASGetCurrentInstallPhase: Unable to get the current phase name
Jun  6 20:54:13 iMac Installer Progress[177]: Progress App loading...
Jun  6 20:54:13 iMac Installer Progress[177]: Progress App is running with no progress set.
Jun  6 20:54:13 iMac Installer Progress[177]: Progress App running...
Jun  6 20:54:15 iMac Unknown[571]: Launching the Language Chooser for an OS Install
Jun  6 20:54:15 iMac launchprogresswindow[569]: ISAP: show progress UI called.
Jun  6 20:54:15 iMac Installer Progress[177]: IASGetCurrentInstallPhase: Current phase name is: Boot 1
Jun  6 20:54:15 iMac Installer Progress[177]: Showing Progress UI
Jun  6 20:54:16 iMac Installer Progress[177]: IOProgressColorTheme is set to 0
Jun  6 20:54:34 iMac Installer Progress[177]: Shield windows created.
Jun  6 20:54:34 iMac Installer Progress[177]: Shield windows ordered front.
Jun  6 20:54:36 iMac Language Chooser[572]: Using progress phase: Language Chooser
Jun  6 20:54:36 iMac Unknown[573]: Setting boot completed.
Jun  6 20:55:06 iMac Language Chooser[572]: LCA+BT2: failed to get BT host controller after 30 seconds
Jun  6 20:55:06 iMac Language Chooser[572]: LCA+BT2: BT host controller appeared after 30 seconds
Jun  6 20:55:06 iMac Language Chooser[572]: AppleSecureBootFailureReason: 0x00, StartupManagerFailureReason: 0x00
Jun  6 20:55:06 iMac Language Chooser[572]: AppleSecureBootFailureReason: 0x00, StartupManagerFailureReason: 0x00
Jun  6 20:55:06 iMac Language Chooser[572]: Could not read prev-lang:kbd to set keyboard.
Jun  6 20:55:36 iMac Language Chooser[572]: ISAP: hide progress UI called.
Jun  6 20:55:36 iMac Installer Progress[177]: Hiding Progress UI
Jun  6 20:55:36 iMac Installer Progress[177]: End progress UI called...
Jun  6 20:55:36 iMac Language Chooser[572]: LCA+BT2: failed to get BT host controller after 30 seconds
Jun  6 20:55:36 iMac Language Chooser[572]: LCA+BT2: BT host controller appeared after 30 seconds
Jun  6 20:55:38 iMac powerd[170]: Assertion Created. Type:UserIsActive Name:'com.apple.iohideventsystem.queue.tickle.4294968395.17' Id:0x900008002 Process:hidd [System: DeclUser kDisp]
Jun  6 20:55:38 iMac Language Chooser[572]: LCA+BT2: failed to get BT host controller after 30 seconds
Jun  6 20:55:38 iMac Language Chooser[572]: LCA+BT2: BT host controller appeared after 30 seconds
Jun  6 20:55:38 iMac Language Chooser[572]: AppleSecureBootFailureReason: 0x00, StartupManagerFailureReason: 0x00
Jun  6 20:55:38 iMac Language Chooser[572]: No primary language hint found
Jun  6 20:55:42 iMac Language Chooser[572]: AppleSecureBootFailureReason: 0x00, StartupManagerFailureReason: 0x00
Jun  6 20:55:42 iMac Language Chooser[572]: Launching the Installer using language code "en"
Jun  6 20:55:43 iMac Unknown[573]: objc[583]: Class OSIDebuggerTool is implemented in both /System/Library/PrivateFrameworks/OSInstaller.framework/Versions/A/OSInstaller (0x10d9c32f0) and /System/Installation/CDIS/macOS Installer.app/Contents/MacOS/macOS Installer (0x10d8ef638). One of the two will be used. Which one is undefined.
Jun  6 20:55:44 iMac storagekitd[584]: Starting SKDaemon...
Jun  6 20:55:44 iMac storagekitd[584]: Client entitled for destructive operations
Jun  6 20:55:44 iMac storagekitd[584]: Adding client connection <NSXPCConnection: 0x7faafec02580> connection from pid 583
Jun  6 20:55:47 iMac OSInstaller[583]: No mutable product specified in NVRAM.
Jun  6 20:55:49 iMac OSInstaller[583]: Connected to daemon. Language set to: English
Jun  6 20:55:49 iMac OSInstaller[583]: Connected to daemon. Language set to: English
Jun  6 20:55:49 iMac OSInstaller[583]: We are not image source booted attempting more robust automation fallback.
Jun  6 20:55:49 iMac Unknown[573]: 2017-06-06 20:55:49.218 macOS Installer[583:3881] Connected to daemon. Language set to: English
Jun  6 20:55:49 iMac Unknown[573]: 2017-06-06 20:55:49.219 macOS Installer[583:3881] Connected to daemon. Language set to: English
Jun  6 20:55:49 iMac OSInstaller[583]: No mutable product specified on boot disk.
Jun  6 20:55:49 iMac OSInstaller[583]: Hardware: iMac13,1 @ 2.99 GHz (x 2), 6144 MB RAM
Jun  6 20:55:49 iMac OSInstaller[583]: Running OS Build: Mac OS X 10.13 (17A264c)
Jun  6 20:55:49 iMac OSInstaller[583]: Env: DYLD_NO_FIX_PREBINDING=1
Jun  6 20:55:49 iMac OSInstaller[583]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Jun  6 20:55:49 iMac OSInstaller[583]: Env: PWD=/
Jun  6 20:55:49 iMac OSInstaller[583]: Env: XPC_FLAGS=0x0
Jun  6 20:55:49 iMac OSInstaller[583]: Env: XPC_SERVICE_NAME=0
Jun  6 20:55:49 iMac OSInstaller[583]: Env: SHLVL=1
Jun  6 20:55:49 iMac OSInstaller[583]: Env: __OSINSTALL_ENVIRONMENT=1
Jun  6 20:55:49 iMac OSInstaller[583]: Env: CI_DEFAULT_OPENCL_USAGE=0
Jun  6 20:55:49 iMac OSInstaller[583]: Env: OS_INSTALL=1
Jun  6 20:55:49 iMac OSInstaller[583]: Env: _=/System/Library/CoreServices/Language Chooser.app/Contents/MacOS/Language Chooser
Jun  6 20:55:49 iMac OSInstaller[583]: Will not update firmware because we can't find the mutable product ((null))
Jun  6 20:55:49 iMac OSInstaller[583]: Creating connection
Jun  6 20:55:49 iMac OSInstaller[583]: Connection = 0x7ffda75ed720, callers = (
	    "<IASUPCaller: 0x7ffda75d59b0>"
	)
Jun  6 20:55:49 iMac OSInstaller[583]: Registering the connection
Jun  6 20:55:49 iMac OSInstaller[583]: client 0x7ffda75eaca0: phaseName = OS Installer 2
Jun  6 20:55:49 iMac OSInstaller[583]: Mutable product: Looking for automation file at (null)
Jun  6 20:55:49 iMac OSInstaller[583]: No file at (null)
Jun  6 20:55:49 iMac OSInstaller[583]: Install Config: Looking for automation file at (null)
Jun  6 20:55:49 iMac OSInstaller[583]: No file at /System/Installation/Packages/Extras/minstallconfig.xml
Jun  6 20:55:49 iMac OSInstaller[583]: Looking for automation file at (null)
Jun  6 20:55:49 iMac OSInstaller[583]: Install will not be automated.
Jun  6 20:55:49 iMac OSInstaller[583]: Install will not be automated, automation is required to proceed.
Jun  6 20:55:49 iMac OSInstaller[583]: Failed to open installer document
Jun  6 20:55:49 iMac OSInstaller[583]: Connection = 0x7ffda75ed720, callers = (
	    "<IASUPCaller: 0x7ffda75d59b0>",
	    "<IASUPCaller: 0x7ffda74de400>"
	)
Jun  6 20:55:49 iMac OSInstaller[583]: Registering the connection
Jun  6 20:55:49 iMac OSInstaller[583]: client 0x7ffda74e4100: phaseName = OS Installer
Jun  6 20:55:49 iMac OSInstaller[583]: client 0x7ffda74e4100: phaseName = "OS Installer"
Jun  6 20:55:49 iMac OSInstaller[583]: ISAP: hide progress UI called.
Jun  6 20:55:49 iMac OSInstaller[583]: Failed to get UUID for system rebless.
Jun  6 20:55:49 iMac OSInstaller[583]: calling progress app remoteObjectProxy
Jun  6 20:55:49 iMac OSInstaller[583]: Connection = 0x7ffda75ed720, callers = (
	    "<IASUPCaller: 0x7ffda75d59b0>",
	    "<IASUPCaller: 0x7ffda74de400>",
	    "<IASUPCaller: 0x7ffda75e0bb0>"
	)
Jun  6 20:55:49 iMac OSInstaller[583]: version = 2
Jun  6 20:55:49 iMac OSInstaller[583]: isModernOS = 1
Jun  6 20:55:49 iMac OSInstaller[583]: Connection = 0x7ffda75ed720, callers = (
	    "<IASUPCaller: 0x7ffda75d59b0>",
	    "<IASUPCaller: 0x7ffda74de400>",
	    "<IASUPCaller: 0x7ffda75e0bb0>",
	    "<IASUPCaller: 0x7ffda75de1c0>"
	)
Jun  6 20:55:49 iMac OSInstaller[583]: Registering the connection
Jun  6 20:55:49 iMac OSInstaller[583]: client 0x7ffda75bc880: phaseName = OS Installer
Jun  6 20:55:49 iMac OSInstaller[583]: client 0x7ffda75bc880: phaseName = "OS Installer"
Jun  6 20:55:49 iMac OSInstaller[583]: ISAP: hide progress UI called.
Jun  6 20:55:49 iMac OSInstaller[583]: client 0x7ffda75bc880: phaseName = OS Installer
Jun  6 20:55:49 iMac OSInstaller[583]: Releasing Connection
Jun  6 20:55:50 iMac OSInstaller[583]: client 0x7ffda75eaca0: phaseName = OS Installer 2
Jun  6 20:55:50 iMac OSInstaller[583]: Releasing Connection
Jun  6 20:55:50 iMac Language Chooser[572]: AppleSecureBootFailureReason: 0x00, StartupManagerFailureReason: 0x00
Jun  6 20:55:50 iMac Language Chooser[572]: Not hiding Language Chooser in window counter
Jun  6 20:56:18 iMac Unknown[573]: Keyboard Layouts: duplicate keyboard layout identifier -14934.
Jun  6 20:56:18 iMac Unknown[573]: Keyboard Layouts: keyboard layout identifier -14934 has been replaced with -28673.
Jun  6 20:56:23 iMac Unknown[573]: 2017-06-06 20:56:23.013 macOS Installer[583:3878] NSColorList could not parse color list file /System/Library/Colors/System.clr
Jun  6 20:56:23 iMac Unknown[573]: 2017-06-06 20:56:23.093 macOS Installer[583:3878] NSSoftLinking - The Quartz framework's library couldn't be loaded from /System/Library/Frameworks/Quartz.framework/Versions/A/Quartz.
Jun  6 20:56:23 iMac Unknown[573]: Got xpc error message: Connection invalid
Jun  6 20:56:27 iMac Unknown[573]: 2017-06-06 20:56 macOS Installer[583] (FSEvents.framework) FSEventStreamStart: ERROR: FSEvents_connect() => Unknown service name (1102)
Jun  6 20:56:33 iMac OSInstaller[583]: Folder Manager is being asked to create a folder (down) while running as uid 0
Jun  6 20:56:33 iMac OSInstaller[583]: Folder Manager is being asked to create a folder (down) while running as uid 0
Jun  6 20:56:33 iMac Unknown[573]: 2017-06-06 20:56:33.729 macOS Installer[583:3878] NSSoftLinking - The Quartz framework's library couldn't be loaded from /System/Library/Frameworks/Quartz.framework/Versions/A/Quartz.
Jun  6 20:56:33 iMac Unknown[573]: 2017-06-06 20:56 macOS Installer[583] (FSEvents.framework) FSEventStreamStart: ERROR: FSEvents_connect() => Unknown service name (1102)
Jun  6 20:56:49 iMac OSInstaller[583]: There are still active callers
Jun  6 20:56:50 iMac OSInstaller[583]: There are still active callers

Share this post


Link to post
Share on other sites

Create Install Media

Clover 4079 UEFI or ESP 

 

I'm using the same version and I created the bootable installer with createinstallmedia method as well, but I'm still stuck at kexts stall[0], (240): 'AppleACPICPU' error

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By glasgood
      CLOVER DUAL BOOT MOJAVE & WINDOWS 10 GUIDE 
       

       
       
      INCLUDES  MBR / LEGACY BIOS  TO  GPT / EFI CONVERSION
      USING MBR2GPT TOOL
       
       
      PREREQUISITE: Two physical discs ( SSD’s or HDD’s )
       
       
       
       
       
      STEP 1 - Clover dual boot configuration 
       
      Open config.plist with Clover Configurator
       
      Boot
       Legacy = PBR Timeout = True ( will remove the Timeout countdown, from Clover boot menu)  

       
      GUI 
      Scan / Custom
       Entries = True  Tool = True  Legacy = False ( removes extra Windows 10 entries )  
      Hide Volume
      - Preboot ( macOS Preboot )
      - Recovery ( macOS Recovery )
       

       
      So at boot you will have two options: boot macOS Mojave or Windows 10 
       
       
       
       
       
       
       
      ————————————————————
       
       
      STEP 2 - Using a drive without Windows 10 installed
       
      Disconnect system drive that contains your macOS Mojave install from computer ( This is so that Windows does not overwrite existing macOS Mojave boot loader )
       
      Proceed with a Windows 10 UEFI install.  
      After installation reconnect macOS Mojave Drive, the Windows installation should now be detected and usable in Clover. 
      If Windows 10 is not detected or able to boot,  then verify you installed Windows 10 as UEFI and not MBR ---->  ( Read step 2 - For a drive with Windows 10 installed )
       
       
      OR
       
       
       
      STEP 2 - Using a drive with Windows 10 already installed
       
      Verify your Windows install is  GPT / UEFI or MBR / Legacy BIOS.   
      If Windows install is GPT UEFI then Windows 10 install is ready to use at Clover boot menu, you should be able to boot into Windows directly from Clover boot screen. 
       

       
       
      But if  Windows drive is detected at Clover boot screen, but when booting Windows you get a black screen with a cursor on the top left,
      then this is most likely because Windows drive is MBR ( Legacy BIOS ).  You can easily convert MBR to GPT using  Windows MBR2GPT tool ( this saves hours work having to reinstall Windows 10 and setting up all your applications again  ) 
       
      If Windows 10 install is MBR / Legacy BIOS  then simply convert to GPT / UEFI  following instructions below ( read video summary and view video )
       
       
      ** To use Windows 10  MBR2GPT tool  you must have Windows 10 version 1703 ( creators update  ) or later and less than 3 partitions on 
      the Windows 10 drive **
       
      Video summary:
       
      Confirm Windows 10 drive is MBR Legacy BIOS ( in Windows Disk Management ) Reboot into Windows PE ( Advanced Startup ) Convert from MBR Legacy BIOS to GPT UEFI ( using commands below ) mbr2gpt /validate mbr2gpt /convert Restart Verify Windows 10 drive has changed to GPT UEFI ( in Windows Disk Management )  
       
       
       
      After conversion Windows 10 is ready to use at the Clover boot menu 
       
       
    • By Slice
      I successfully installed macOS 10.11.6 and Windows 7 Pro SP1 in UEFI mode on the laptop.
      I know, there are detailed guides here and on osxlatitude.com but I was not agree with them and carefully check and test every step to tune my Mac.
       
      Hardware
      Intel® Core� i5-3320M CPU @ 2.60GHz, speedstep works with Clover default settings
      Chipset Intel 7 series, no patches needed
      Video: IntelHD4000 or NVS5200M switchable in BIOS, work in both cases
      LAN; Intel 82579LM, works with IntelMausiEthernet.kext v2.2.1
      Audio: IDT 92HD93BXX, works with VoodooHDA 2.9.0.
      SDHC reader O2Micro; works with native AppleSDHC.kext with Clover Arbitrary properties.
      USB3.0 works natively if not disabled in DSDT
      PS2 keyboard and touchpad works with VoodooPS2.
      WiFi: Dell Intel WiFi was replaced by Dell DW1520, Broadcom BCM943224HMS. DeviceID=4353
      LCD Screen 1366x768
      BIOS A12. Initially was A02. Then I flashed A23 and found it is quite bad. The screen is full of artefacts. Flash A12 and all is OK. Not tested other versions.
      For some reason BIOS can switched from Intel to Nvidia by itself so I have to do my solution working independent on this state.
       
      WiFi
      It is not working OOB although it has DeviceID known to Apple. The reason is WhiteList in the driver.
      I set MacModel as MacBookPro10,1 while the WiFi will work on MacBookAir. I make a patch in Clover.
      As well a patch for channels.
      I deleted a kext Brcm4331 because it has the same DeviceID. Let kext Brcm4360 to work alone.
       
      VideoCards
      In Bios we can set Optimus = Enable/Disable
      If Enable then we have two videocards Intel first and Nvidia second. In this case additional SSDT-3.aml will switch off Nvidia.
      If Disable then we have only Nvidia card. It will work if Board-ID taken from iMac13,2.
      But here there is contradiction with WiFi with required Board-ID from MacBookAir.
      So I take MacModel as MacBookPro10,1 which is most close by CPU IvyBridge.
      Set BoardID like iMac13,2 to make Nvidia working.
      Patch BoardID in Brcm4360 to make WiFi working.
      Now I have
      Inject->
      ->Intel=YES
      ->Nvidia=YES
      and SSDT-3.aml in ACPI\patched folder. This SSDT will switch off Nvidia if Intel card ON.
      For Intel graphics there is a patch against 8 apples at start.
       
      Brightness
      No special kexts.
      The brightness controlled by keys F1,F2 and slider in Control Panel in both case Intel or Nvidia. Details here  #72 
       
      DSDT and SSDT
      This is very long story and finally I have working sleep in both cases Intel or Nvidia.
       
      Sensors
      I use my HWSensors3 with FakeSMC 3.5.0.
      I got monitoring:
      CPU temperature
      GPU temperature
      GPU main frequency
      GPU shader frequency
      Battery state % full, time to charged or time to empty.
      Battery voltage dinamically.
      Battery amperage dynamically. I can see it changes on heavy games.
      HDD temperature.

       
      Audio
      I like VoodooHDA and have no problems with it.
      The sound is clear, loud, and switchable between internal speaker and headphone.
      Mic is working.
       
      Bluetooth
      Just tested with BTFirmwareUpdate.kext and it works in 10.11.6. I not needed it so switched off by wireless switch at right side.
      For 10.13.6 there is other kext BRCMInjector.
       
      Keyboard, Touchpad and Touchstick
      Post #14
       
      My config, ACPI files and kexts are in attachment.
      05.12.2017
      EFI.7z
       
      EDITED:
      Better DSDT in the post #6.
      Sleep working even when AC inserted.
       
      EDITED 06.12.2018
      Now I have HighSierra and this is my EFI folder
       

       
       
      Welcome to discussion!
      EFI-E6430.7z
      BRCMInjector.kext.zip
    • By h2onions
      Hey all,
       
      First Hackintosh that I think I have completed! I've been working on it on and off for a month, but just grinded it this past weekend. I just have a small QOL issue. I have posted in the r/Hackintosh reddit, but have not gotten a reply to this specific issue, but did for other issues I was having. I also posted at tonymacx86 and was getting replies for other issues I was having, but got banned because I said, "used VM, but didn't work" in my OP I think ...
       
      I followed a PC vanilla guide from r/Hackintosh that I found as I did not have an Apple system. One monitor connected to a GTX 1080, CPU: i7-8700, Coffee Lake. Motherboard is Alienware specific 0VDT73, with chipset Z370.
       
      The issue is every time High Sierra boots up and gets to the login screen, my keyboard and mouse do not work. I only have to reseat both and then they work the whole time until I restart. They are both plugged into USB2.0 ports. I do have Lilu, WhateverGreen, USBInjectAll, and VoodooPS2 installed in my /Library/Extensions folder using #####. Mouse and Keyboard work fine each time I boot to Clover (USB). Any ideas?
       
      Thank you!
      Working: NVIDIA using (One) DisplayPort, USB3.0 (rear), USB-C (rear), USB2.0 (rear), Audio, Ethernet
       
      EDIT: Did some more testing, and it looks like my Keyboard works fine after each reboot, the only issue is that my mouse has to continuously be reseated. Any ideas? Could it just be the mouse?It's an old Inland USB mouse: 337451
    • By Badruzeus
      "The all-new 2019 version of the graphic design software suite is compatible with not only Windows but also Mac, complete with support for Dark Mode on macOS Mojave and the Touch Bar on the latest MacBook Pro models, providing quick access to layout settings, text controls, and more." ~ macrumors
       
      More details: https://www.coreldraw.com/en/product/coreldraw/mac/
    • By Utku
      Hi guys, I have a big problem for VT -x. I tried any things for example: dark=0 or already bios option is virtualization is enable. I don't understand this problem.
       
      Thanks guys!! And yes I have intel Q8400 quad core cpu, motherboard is Asus asus p5g41c-m lx.
       


×